Styling TabPane header area / fx-border-bottom-color

Hi,
I want to style the TabPane to my needs.
Especially I want to replace the ugly gray background in the header area, which is defined in caspian.css as:
.tab-pane *.tab-header-background {
    -fx-background-color: -fx-outer-border, -fx-inner-border, derive(-fx-color, -20%);
    -fx-effect: innershadow(two-pass-box , rgba(0,0,0,0.6) , 4, 0.0 , 0 , 0);
}If I remove the background, the "border" is also removed (it is mimiced by the shadow I think).
.tab-pane *.tab-header-background {
    -fx-background-color: null;
    -fx-effect: innershadow(two-pass-box , rgba(0,0,0,0.6) , 4, 0.0 , 0 , 0);
}I only want a border at the bottom of the background. But this has no effect:
.tab-pane *.tab-header-background {
    -fx-background-color: null;
    -fx-border-bottom-color: red;
}It seems JavaFX does not support -fx-border-bottom-color (although it is CSS 3).
How can I do it?

There is much of CSS 3 that JavaFX doesn't currently support, and border-bottom-color is one of them. But the shorthand works.
    -fx-border-color: transparent transparent red transparent;

Similar Messages

  • Tabbed Panels border-bottom color problem

    Small problem. Page has black backround, and to match it, the border-bottom is set to black on the active tab. Trouble is that this breaks up the outline on the vertical left side in FF and Chrome (but strangely, not in IE).
    Any solution?

    Name of the site is in the graphic above.
    I have now seen that this small (1 pixel) gap exists in all implementations of the Spry Tabbed Panels.
    Check yourself (you will need to use Ctrl+"+" to magify the screen to see it).
    It seems to be an unavoidable bug that is usually hidden by colors that are not too contrasty.
    Oh well, seems I have to accept this minor flaw and move on?

  • The red colored "record ready" button has disappeared  from my track header area. The other four buttons are showing fine, (input (i), hide (h), mute (m) and solo (s).

    The red colored "record ready" button has disappeared  from my track header area.
    The other four buttons are showing fine, (input (i), hide (h), mute (m) and solo (s).
    Can anyone help me with this?
    Thanks
    Johnny

    Ahrenshof: Thank you for your suggestion:
    ((preferences>audio>devices  (re-select your input source) ))
    I already had that done IE. I had duet already chosen as input and output etc etc.
    The problem seemed to be the issue that was addressed by Eriksimon:
    (( ctrl-click the track Header.))
    Following that advice gave me a drop down menu which allowed the various buttons to be
    checked and unchecked.
    Thanks so much for taking the time out to
    help with my problem. It seems to me that
    this formum is far better equipped to handle
    user's problems than any or the options that
    are available on the acual Logic help menu.
    It appears that Logic has been put
    together by techies who, (though they
    may be brilliant at computer software issues), then have
    virtually no skill or imagination with regards explaining
    how to use it, to the actual users.
    I have a PhD in Egyptology. I mention this not
    because I think it a particularly brilliant acheivement
    but just to indicate that I am not a total dummy.
    More to the point I find using Logic needlessly tiresome
    and the explanations that are given in the "Help" menu
    are nothing short of tragic. Perhaps Apple could start to give
    out free ropes or razor blades to everyone who buys the program.
    Not to say it is not much better that the other junk out there, it is,
    the sorry fact is that that is not saying much at all.
    I send sincere thanks to all the users out there who support
    each other through this forum. johnnyloonybin

  • Is anyone having issues with ink leaking from the printer head area? hp officejet pro 8000

    HP Officejet Pro 8000 Wireless, Windows 7 64-bit.  Printer is leaking from the printer head area.  The problem doesn't seem to be coming from the heads but maybe another connection?????

    docrobin
    I would suggest you called into HP Technical Support for repair options as you may have a hardware issue.
    Here is the link to contact options for laptops purchased in the US.
    Here is the link to contact options for laptops purchased outside the US.
    Please feel free to re-post if you have any further questions or concerns.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Is it possible to set specific border side color of GridItem in ActionScript?

    Hi,guys,
    What I would like to achieve is for a GridItem , I would like to set left/right/top/bottom border side with specific color.
    For instance,like the css:
    border-left:solid red 3px; border-right:solid violet 4px; border-top:solid blue 4px; border-bottom:solid green 4px;
    How to set a GridItem border side color  with a specific color(different border side color) in ActionScript? 
    Thanks.

    Thanks very much,kglad.
    Earlier,I tried using a datagrid but seemly, it didn't work coz. the data I got is not like the normal data.
    The following is some of the data:
    {"width":{"value":210.0,"unit":"mm"},"height":{"value":297.0,"unit":"mm"},"leftMargin":{"v alue":5.0,"unit":"mm"},"rightMargin":{"value":5.0,"unit":"mm"},"topMargin":{"value":5.0,"u nit":"mm"},"bottomMargin":{"value":5.0,"unit":"mm"},"rows":[{"height":20,"rowNumber":0,"ce lls":[{"colNumber":0,"rowNumber":0,"colSpan":0,"rowSpan":0,"fontSize":12,"value":"部门","lef tBorder":null,"rightBorder":null,"topBorder":null,"bottomBorder":null,"align":"center","va lign":"middle","bgcolor":"192,192,192","forecolor":null,"width":133},{"colNumber":1,"rowNu mber":0,"colSpan":0,"rowSpan":0,"fontSize":12,"value":"学历","leftBorder":null,"rightBorder" :null,"topBorder":null,"bottomBorder":null,"align":"center","valign":"middle","bgcolor":"1 92,192,192","forecolor":null,"width":80},{"colNumber":2,"rowNumber":0,"colSpan":0,"rowSpan ":0,"fontSize":12,"value":"性别","leftBorder":{"width":1,"color":"0,0,0","style":"solid"},"r ightBorder":{"width":1,"color":"0,0,0","style":"solid"},"topBorder":{"width":1,"color":"0, 0,0","style":"solid"},"bottomBorder":{"width":1,"color":"0,0,0","style":"solid"},"align":" left","valign":"middle","bgcolor":"192,192,192","forecolor":null,"width":80},{"colNumber": 3,"rowNumber":0,"colSpan":0,"rowSpan":0,"fontSize":12,"value":"用户名","leftBorder":null,"rig htBorder":null,"topBorder":null,"bottomBorder":null,"align":"center","valign":"middle","bg color":"192,192,192","forecolor":null,"width":150},{"colNumber":4,"rowNumber":0,"colSpan": 0,"rowSpan":0,"fontSize":12,"value":"薪水","leftBorder":null,"rightBorder":null,"topBorder": null,"bottomBorder":null,"align":"center","valign":"middle","bgcolor":"192,192,192","forec olor":null,"width":113},{"colNumber":5,"rowNumber":0,"colSpan":0,"rowSpan":0,"fontSize":12 ,"value":"","leftBorder":null,"rightBorder":null,"topBorder":null,"bottomBorder":null,"ali gn":"center","valign":"middle","bgcolor":null,"forecolor":null,"width":86}]},{"height":20, "rowNumber":1,"cells":[{"colNumber":0,"rowNumber":1,"colSpan":0,"rowSpan":7,"fontSize":12, "value":"上海-软件研发部","leftBorder":{"width":1,"color":"0,0,0","style":"solid"},"rightBorder": {"width":1,"color":"0,0,0","style":"solid"},"topBorder":{"width":1,"color":"0,0,0","style" :"solid"},"bottomBorder":{"width":1,"color":"0,0,0","style":"solid"},"align":"center","val ign":"middle","bgcolor":null,"forecolor":null,"width":133},{"colNumber":1,"rowNumber":1,"c olSpan":0,"rowSpan":2,"fontSize":12,"value":"中专","leftBorder":{"width":1,"color":"0,0,0"," style":"solid"},"rightBorder":{"width":1,"color":"0,0,0","style":"solid"},"topBorder":{"wi dth":1,"color":"0,0,0","style":"solid"},"bottomBorder":{"width":1,"color":"0,0,0","style": "solid"},"align":"center","valign":"middle","bgcolor":null,"forecolor":null,"width":80},{" colNumber":2,"rowNumber":1,"colSpan":0,"rowSpan":2,"fontSize":12,"value":"1","leftBorder": {"width":1,"color":"0,0,0","style":"solid"},"rightBorder":{"width":1,"color":"0,0,0","styl e":"solid"},"topBorder":{"width":1,"color":"0,0,0","style":"solid"},"bottomBorder":{"width ":1,"color":"0,0,0","style":"solid"},"align":"left","valign":"middle","bgcolor":null,"fore color":null,"width":80},{"colNumber":3,"rowNumber":1,"colSpan":0,"rowSpan":0,"fontSize":12 ,"value":"王忠亮","leftBorder":{"width":1,"color":"0,0,0","style":"solid"},"rightBorder":{"wi dth":1,"color":"0,0,0","style":"solid"},"topBorder":{"width":1,"color":"0,0,0","style":"so lid"},"bottomBorder":{"width":1,"color":"0,0,0","style":"solid"},"align":"center","valign" :"middle","bgcolor":null,"forecolor":null,"width":150},{"colNumber":4,"rowNumber":1,"colSp an":0,"rowSpan":0,"fontSize":12,"value":2717.00,"leftBorder":{"width":1,"color":"0,0,0","s tyle":"solid"},"rightBorder":{"width":1,"color":"0,0,0","style":"solid"},"topBorder":{"wid th":1,"color":"0,0,0","style":"solid"},"bottomBorder":{"width":1,"color":"0,0,0","style":" solid"},"align":"center","valign":"middle","bgcolor":null,"forecolor":null,"width":113},{" colNumber":5,"rowNumber":1,"colSpan":0,"rowSpan":0,"fontSize":12,"value":"","leftBorder":n ull,"rightBorder":null,"topBorder":null,"bottomBorder":null,"align":"center","valign":"mid dle","bgcolor":null,"forecolor":null,"width":86}]},{"height":20,"rowNumber":2,"cells":[{"c olNumber":3,"rowNumber":2,"colSpan":0,"rowSpan":0,"fontSize":12,"value":"吴忠民","leftBorder" :{"width":1,"color":"0,0,0","style":"solid"},"rightBorder":{"width":1,"color":"0,0,0","sty le":"solid"},"topBorder":{"width":1,"color":"0,0,0","style":"solid"},"bottomBorder":{"widt h":1,"color":"0,0,0","style":"solid"},"align":"center","valign":"middle","bgcolor":null,"f orecolor":null,"width":150},{"colNumber":4,"rowNumber":2,"colSpan":0,"rowSpan":0,"fontSize ":12,"value":4504.00,"leftBorder":{"width":1,"color":"0,0,0","style":"solid"},"rightBorder ":{"width":1,"color":"0,0,0","style":"solid"},"topBorder":{"width":1,"color":"0,0,0","styl e":"solid"},"bottomBorder":{"width":1,"color":"0,0,0","style":"solid"},"align":"center","v align":"middle","bgcolor":null,"forecolor":null,"width":113},{"colNumber":5,"rowNumber":2, "colSpan":0,"rowSpan":0,"fontSize":12,"value":"","leftBorder":null,"rightBorder":null,"top Border":null,"bottomBorder":null,"align":"center","valign":"middle","bgcolor":null,"foreco lor":null,"width":86}]}]}]}
    What I am doing now is to parse the above json data and draw the table( like report) using mx:Grid component according to the parsed json metadata.Everything works fine except the left/right/top/bottom border color setting.
    I have been learning flex for only three weeks. Maybe It does work using a datagrid component or .grid component.
    Could you show me how to do it.
    Thanks again!

  • Setting the Border background color

    Post Author: gravy
    CA Forum: .NET
    Hi,
    Using the API I'm trying to set the Border background color to transparent but I can't. I want to set the background color to match what the designer does when you uncheck the Background option on the Border tab of a TextObjects properties.
    Can anyone help?

    What release are your using?
    do you want to set this dynamically, for one portlet or all. you may what to use
    'Themes'
    "Jorgeana" <[email protected]> wrote:
    >
    Does someone have a sample of setting the portlet border and background
    color ?
    I´m having problems using "setPortletBGColor" !! Tks

  • I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes.   I hav

    I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I have viewed some videos and read numerous articles but haven't found the one to help me. Please point me in the best direction. Thank you Vincent TC

    For the sake of clarity and to save people time, Todd is asking about the behaviour of the Patch tool when using it to repair the area next to the young lad's head.  Todd gets a blurred dark tone pretty much regardless of the options he uses.
    IMO that's what I would expect to happen because of the close proximity of the other image elements i.e. the lad's neck and the strong lines of his shirt.  I would not choose to use the Patch tool in this situation.  Content Aware Fill makes a better stab at it. 

  • E book" it tells me that the bI have prepared a photobook, made a pdf and when I press "buy the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

    I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

    You are missing one or more photos - youprobably have a page background that requires a photo which is behind a page with photos on it - all pages must either have a photo or be a color - if you have a gray background it requires a photo - look through the book carefully and be sure to look at the background on any full page photos - you will find one or more missing photos
    LN

  • Where are the scanner mode (color, black and white) saved on a windows 7 machine?

    We have 30+ Canon 2580c scanners and the users are constantly changing to color scanning and forgetting to change it back to black and white.
    I'm trying to figure out where these settings are saved.  I have compared full registry dumps before and after changing the mode but do not see any differences that look scanner related.  There is a file setscan.ini the appdata/roaming/isis drivers folder that gets the date modified updated each time but nothing is changed in the file.
    Any help would be appreciated.

    Hi mswalter2012.
    I will be glad to assist you.  When using the CapturePerfect program, I recommend using the [Scan Job] setting.  There are two jobs already registered in the program.. You can select [Color Document], which is 24-bit color as Simplex 300 dpi, or [Binary Document], which is black and white as Simplex 200 dpi.  To create a new job, please follow the instructions below:
    1.  Select [Create/Delete Job] in the scan menu.
    2.  Select a number to register a job, and then click [Create/Edit].
    3.  Enter a title for the job.
    4.  Click the drop-down for [Function] and select where you want the scan to be sent.
    5.  Click [Detail Settings].
    6.  Click the [OK] or [Save] button to close the settings.
    7.  Click [OK] to close the [Create/Edit] window.
    To scan using the saved scanned job, select [Scan Job] from the CapturePerfect file menu.
    I hope this information is helpful.  Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Can't get rid of account icon photo in mail header area

    How can I get rid of the thumbnail photo icon in the mail header area when I send an e-mail in Mail?
    It is one of the supplied icons that is in system preferences for "accounts", to distinguish my account from my wife's on our iMac G5 (10.4.10). I recently only selected this icon....the boxer dog....but there was nothing in that area before when I used the generic sillohuete as my account log-in identifier.
    Basically, I don't want to be sending e-mails with a dog's photo....as much as I like dogs.
    I have read how to ADD a custom photo in .Mac preferences/profile but, I didn't see how to get rid of one and I did not consciously choose to add the photo that is there now.....it just appeared after I changed it in System Preferences/Accounts. I understand that it might appear in iChat, but, I am not/wasn't using iChat.

    Those photos don't actually get sent. They are a "feature" of Mail. You probably have a "Me" card in your address book? Get rid of the picture there, and it should get rid of the picture in the header region of your emails as displayed in Mail.app. But, like I said, those don't actually get sent, anyways. Got Windoze at work? Send an email to yourself at your work email address -- you'll see -- no boxer dog. But, please pay a visit to http://www.apple.com/macosx/feedback/ and let them know what you think of this feature.

  • Adobe Reader 9.0 - Disable Forms Highlight color show border hover color for fields for all user a

    Hello.
    I am installing Adobe Reader 9.0 onto a new windows xp corporate build for my company. We would like to have the Forms Preference "Highlight Color" Show border Hover Color for Fields checkbox unchecked by default for any user that logs onto the workstation. (All new WinXP profiles, and if possible, any existing profiles) Is there a registry entry that can be changed to ensure that this option is unchecked by default on our WinXP build?
    Thank you.

    bumping thread...
    I have downloaded the Adobe Reader 9.0 Custom Wizard install creator tool, but it still appears that I will need to know what registry key to change/import into the installer for this preference to be disabled by default for all users of the workstation that Adobe Reader 9.x is installed onto.
    Any and all help is greatly appreciated.
    Thank you.

  • Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

    Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

    Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there.  For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color.  For a basic object, there should be a fill and/or stroke.
    What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted.  Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something.  You can drag those unwanted thingies from the Appearance palette into its own little trash can.

  • How to hide Saved Searches in the header area of web ui

    Hi All,
    My Query Is how to hide Saved Searches in the header area of web ui.
    For This is there any configuration or we have do through the code.
    Thanks & Regards,
    Venkat

    Another approach:
    Open view CRM_WORKAREAHDR/WorkAreaHeader and change the configuration. There is a button in the bar named "Attributes" (probably hidden under MORE).
    Once in there in edit mode substitute the content of attribute "UI_COMPONENT_3". It should be
    Window=CRM_ALLSEARCHES.CRM_ALLSEARCHES/LauncherWindow;horizontalAlignment=right;
    put there a
    Width=0px;
    The other way using business role is fine as well.
    cheers Carsten

  • Link to folder in a room - missing header area and navigation panel

    Hello Community,
    I have a problem, again. While creating favorites to specific folders I got a problem while using and "publishing" them.
    While using the "send to..." feature the recipient gets an eMail with the link to this folder. When clicking this link he gets as the result the opened folder, displayed in a browser. Until now nothing really unexpected.
    What we want is that he gets not only the opened folder. We want that he gets the whole navigation around it (navigation panel, header area) for the specific room the folder is in.
    Now my question. Is it possible to create a link with this behavior?
    Thanks for every hint in advance!
    Regards,
    Frank

    Hi Frank,
    if you have navigated to the room / within the room to the room part you want, check the page toolbar, choose "Add to Portal Favorites", add it under some name; then in IE choose Favorites, right-click on the favorite just added, right click, properties (or just call it). The upcoming URL of the form http://portal:50000/irj/portal?NavigationTarget=navurl://1f9eaddf81792cb6f2b9f05381cce360&&NavTargetAsRoot=true should do the trick (this at least holds from SP14 on).
    Hope it helps
    Detlev

  • How to select all single values in the header area

    Dear Experts
    I got a request that the user wants to select a single value or all single values in the header area. E.g. if the values from characteristic master data are A, B, C and D, the selection can be one of these values or all of them. With the standard BPS configuration, due to the unique combination in the header area, selection of  'All' single values is not possible. Is there a way to select all single values in the header area?
    Thanks, Jessica

    Hi Jessica,
    Here is a solution where you need not to change your planning layout or to create a new variable or any exit function.
    Step 1 - Maintain master data value 'ALL' in the required characteristic.
    Step 2 - Create a copy function to copy all the required data records to 'ALL'. you can use standard copy function where you have to include only this characteristic in the fields to be change.
    Copy -
    From = all values (A,B,C,D etc)
    To = "ALL".
    Step 3 - Call this function on layout opening. you can include it in the planning folder and change the function attribute to call it on layout opening.
    Step 4 - Create a standard Delete function. you have to call this function on save operation. In this function, you have to delete all data records present in the buffer where required char contains 'ALL' value.
    This approach can impact the performance of the planning application. It depends on the number of data records you are dealing with. Standard Copy and Delete functions are pretty fast in nature.
    I hope it will help you. please let me know if you need more inputs.
    Regards
    Tarun

Maybe you are looking for