I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I hav
I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I have viewed some videos and read numerous articles but haven't found the one to help me. Please point me in the best direction. Thank you Vincent TC
For the sake of clarity and to save people time, Todd is asking about the behaviour of the Patch tool when using it to repair the area next to the young lad's head. Todd gets a blurred dark tone pretty much regardless of the options he uses.
IMO that's what I would expect to happen because of the close proximity of the other image elements i.e. the lad's neck and the strong lines of his shirt. I would not choose to use the Patch tool in this situation. Content Aware Fill makes a better stab at it.
Similar Messages
-
I was doing the IOS 7.0.2 update to address security. The IPad is now telling me to plug in to Itunes. When I do so, my MAC is saying the IPad is in recovery mode and my data will be lost. What happened?!! How do i fix?
Something went wrong with the update and you are in Recovery Mode.
Follow the instructions below to recover your iPad.
http://support.apple.com/kb/ht4097 -
can't print
When you click the "3-bar" menu button and then Print, Firefox should show a preview of how the page will look when printed. I'm puzzled why it doesn't.
If you use one of these methods to call up the print dialog, does that work:
* Ctrl+p
* tap the Alt key to activate the menu bar > File > Print
If those don't work either, you may need to clear the information Firefox has stored about your printer. This article describes how you can do that: [[Fix printing problems in Firefox]]. -
I notice an issue that predominantly happens when I use my thumbs to tap but does happen with fingers from time to time.
When I select an icon (say, for instance the lower-right corner icon to jump into camera settings), the icon changes color slightly when my thumb touches the glass, and then when I remove my thumb, nothing happens.
Sometimes this happens more than 5 times in a row. It's one thing if the screen never recognized my finger/thumb in the first place. It is a bit more madening when I KNOW that there was recognition (icon changing color) and yet nothing happens..
Anyone else having this problem? Is there some way to recalibrate the screen?
Right after I posted this message I tried that camera setting button - 7 tries before anything happened with my right thumb, one try with right index finger, then again it took 5 tries with index finger. The frustrating thing is that the icon to load the camera in the first place (lower right corner)... that one almost always works with the first tap...Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5. Dont know if I changed settings or something.
Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html -
hello i got problem. iphone doesnt restore even using itunes.its stuck in recovery mode and i cannt do anything with it.error 1015 is there any way to reinstall software even if itunes cannot deal with it ?
Usually this error occurs when trying to downgrade the iOS or in a previously jailbroken phone. In this case, you cannot get help here. The internet and Google are your best friends.
-
Hi, I'm having a problem retrieving my missed calls. When I press the recents button it goes back to home screen. But when I press mail button and any other application the button works. I have tried restore but to no avail. Please help.
I have exactly the same problem, happy a few days ago. Did you find a solution?
-
Having trouble trying to open links on my recieved mail. The only response I get when I click on the link is, "No associated application could be found".
How can I correct this problem?What type of file is it? What is the extension (the 3 letters after the . (DOT)) of the file?
Could be it is a Windows Exe file and simply will not run on a Mac. Which is good because anyone that would send you a excute (.EXE) file is up to no good. just my opinion. -
i bought a iphone 5s from gumtree. While trying to activate it i realised there was an account linked to it through an apple id. it doesnt say the phone is in lost mode and it still has warranty. am i able to get a fix from apple?
unfortunately - no
if the device is on ios 7.1 or above there's two things.
1) the device may be restored to factory settings - but the phone can't be activated. imei unlock is different to Iphone activatio. - your friend unlocked it to use any sim in any country. iOS 7 forces you to restore the phone and reimpit the original icloud login. This can only be solved if you a)forgot the login/changed it, and can prove to apple youre the owner; b) to get the original owner to deauthorize his account associated with the phone, on his/her computer.
2)if there's also a Passcode lock on the phone, and the last registered sim doesn't work (in the case of a stolen phone) - then it's impossible for you to do anything, full security = restore will lead to activation lock immediately. There's no bypass to it, the fake videos online only allow a bypass if the device was a 'jailbrokem' one - which would invalidate apple trying/ever wanting to help you.
if you know who the phone belonged to previously (usually comes up with the icloud username on it) then you can ask them to deactivate it.
otherwise, you have what we call - a brickb- won't even work as a super iPod touch
my iphone was stolen on sat in prague - white, 32 gb iphone 5 - if it's mine, I'll have it back please just incase -
I have been getting this error message since about the end of June when I updated to the latest version of iTunes. It's pretty annoying. Let me lay out how this has been happening for the past month, the best I can. I have a 32GB 4th gen iPod Touch
I load content up to my iPod. Music, Apps, Videos, pictures, etc.
My iPod works well for a little while, days sometimes a week is the longest I went without seeing this message.
I connect iPod back to my laptop through the standard pack in Apple USB connector.
I get the "Itunes cannot read the contents of ipod. Go to the summary tab in Ipod preferences and click Restore to restore this ipod to factory settings." message. When I go to the preferences tab, I click restore and iTunes gets stuck trying to restore my iPod. Then I have to uplug my iPod. And Shutdown/Restart my PC reconnect my iPod, and go through the restore process again.
I have been doing this for as I said, a month. It's getting pretty grueling to keep havomh putting cotent on my iPod after these restores.
I've tried everything.
I've stopped autosync, it still happens.
I tried to reinstall iTunes(be it I didn't full uninstall before trying to install again and got the option to fix corrupted files and such
I've deleted all old back up, and it still happens
Today is the fist time I'm fully uninstalling iTunes, and then reinstalling to see if this works.
But do you guys have any otehr solutions for this? As I said, this didn't start happening until I installed the lastest version of iTunes 10.6.3- Have you tried another cable?
- Another USB port?
- When you have the problem, connect it to another computer to help determine if you have an iPod or computer problem.
- Try just restoring the iPod to factory settings/new iPod. Do not restore from backup. If you still have the problem with this and all computer that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Apple tv is giving me a meesage that says... There is a billing problem with a previous purchase. Go to the iTunes Store on your computer and click Purchase History to resolve problem. I have gone to my purchase history but can't seem to fix this issue.
You can contact the iTunes Store Customer Service department at no charge using the form on their Support page (select the category and subcategory closest to the issue you're reporting and you'll find an "Email Us" button) and explain your problem to them.
Copied from Varjak Paw in :https://discussions.apple.com/thread/2598671 -
i tried to up date my i phone 4 to iOS 5 then it wiped my phone and now it tells me to connect to iTunes and that the iPhone is in recovery mode and when i connect it goes to preparing to install to iPhone but never goes any further how do i restore the phone
by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update. -
I have Iphone 4s on iso 6.1.3 I have tried to Update it to Iso 7.0.4 but the phone stuck on Recovery mode and now i cant update it or restore it to the old iso so please help what i should do?
READ the article from which the question was posted and follow all the troubleshooting steps.
-
My iphone4 has been stuck on the connect to itunes logo for a few hours. I connected it to itunes and it says that the iphone is on recovery mode and that I need to restore it to use it with itunes. I'm afraid that if I restore it I will loose everything help please!!
AT this point whatever data you have on yoru phone is already gone since it is in recovery mode.
However you can restore from your backup, when your phone reboots from recovery.
YOu do have a backup right? -
When I get an email with a pic in and I go to reply a box drops Dow and asks "save photo" when I click on that it "seems" like nothing happens, bot are they being automatically saved someplace, where?
If photos are saved they go to the Camera Roll in the Photos App.
Maybe you are looking for
-
Startup freeze 10.6.8 on macbook pro
With my MacBook Pro 17" with Intel Core 2 Duo, 2.33 GHz startup freeze with 10.6.8 - I have problems after several Mac SW upgrades, I really use Apple SW & HW, only Microsoft Office as 3rd Party. Startup ends every time in a freeze or a crash, nothin
-
Function Module in Generic DataSources in BI
Hi, I appreciate your answer about the Function Module in Generic DataSources in BI. These are the steps I followd on R/3 side. 1) Create a structure with the R/3 table fileds based on the requirement. 2) Create a function module by copying RSAX (Fun
-
Getting my podcast picture to post up!
Along similar lines. I've created a podcast in iWeb. Iweb is great podcast editting software (although I like Podcast Maker too) but iWeb does the trick! ONE HUGE PROBLEM. My main image doesn't register. The only way it registers is if I make a new p
-
Safari HTML5 video appears dark
The video plays just fine in every browser, and I use the standard 3-codec approach. On every other browser, the video "melts" into the white background intentionally, but in Safari, the video appears gray and ruins the effect - any ideas why? Homepa
-
HT5654 New download for itunes fails
I keep trying to down load the new update and it keeps failing. It says to go to tools and do it manually but I don't know what tools they are talking about.