Stylus RMX and Logic Pro 9

Hi Everyone and forgive me for this ancient question but.. . .I have just spent an agonizing three days rebuilding my hard drive after the new Mac upgrade totally trahsed mine (and apparrently a lot of other people's as well). I'm not at home and therefore the restore disc is unavailable so I'm having to do it all by hand, so to speak.
Here's my question: Could someone walk me through setting up Stylus as a Multi-Timbral Instrument again? What's happening now is that, when I go to 'Create New Instrument/Multi-Timbral/8' I'm getting 8 tracks but they're all connected (i.e. you move one fader and they all move). Secondly, my old set up had MIDI tracks where (what seem to be) audio tracks are. I've tried to approach this from every possible angle, but still no luck. If I can't get MIDI tracks to appear on the Arrange Page, how can I insert the MIDI file from Stylus that I want to use?
OK, thanks for your help and please, do not, under any circumstances install the new upgrade!!! The forums are crammed with people who've had the same problem I had. Cheers, John

John Landi wrote:
Here's my question: Could someone walk me through setting up Stylus as a Multi-Timbral Instrument again?
John,
I'm just learning about RMX and Omnisphere and believe I ran across your answer while studying some tutorials.  The screen shot below is from a RMX/Logic tutorial on Spectrasonics website: http://spectrasonics.net/products/stylusrmx-videos.php?p=4&f=&q=&InstrumentID=3& VideoTypeID=3 (it's an imbedded video towards the bottom of the page titled; Stylus RMX Tutorial RMX and Logic)
The video is based on Logic 7 and RMX 1.5, but still provide the basics for you to reset RMX as a Multi-Timbre instrument.  Cheers!
Stylus RMX Tutorial
RMX and Logic

Similar Messages

  • Stylus RMX and Logic Express

    Hello,
    I'm using stylus rmx with LE. I'm stuck. I'm tryin to create a "multi-track", (I believe thats what its called). Right now I'm following a instructional dvd and the instructor just wire 8 tracks to 1 in the enviro window. So I followed and drew all the wires to the 8 inputs. Then back in the arrange window, (and heres where I get lost). He fella goes to the "track" option and selects " create with new instrument". Now he creates * tracks from the 1 pug in. I'm assuming that he's using Logic Pro because I dont have that option. Is there another way to acheive this without that option ?

    Right now I'm following a instructional dvd
    and the instructor just wire 8 tracks to 1 in the
    enviro window. So I followed and drew all the wires
    to the 8 inputs.
    This doesn't sound right. You should be creating a multi-instrument in the Environment with 8 channels enabled, not 8 individual instruments. There only needs to be one multi-instrument assigned to a single instrument track (one wire) in the environment. Make sure to assign the midi channel to "all" for the instrument object, but enable the first 8 channels on the multi-instrument object.
    Then, when you're back in the Arrange page, you can create a new instrument track for the Stylus L/R audio output and then create new midi tracks assigned as sub-channels to Stylus. Each sub-channel will then control a different part in Stylus.
    There is a Quicktime video you can download for free from Spectrasonics that walks you through setting up Stylus in Logic. Maybe your DVD makes it harder than it needs to be...
    Dual 2.5Ghz 2004; 2.5GB RAM   Mac OS X (10.4.8)  

  • Stylus RMX and Logic - reconnecting sounds

    I was running out of space on my main HD so I moved my STYLUS RMX to an external drive.
    Problem is, now ALL my LOGIC songs don't "see" that I've moved the sound files for RMX> Is there a way to "teach" the computer that I've moved the files to a new place?
    Like there is in Final Cut Pro -is there a way to "reconnect media" so that Logic understands and recognizes the new path??
    PLEASE HELP!

    Yes creating the RMX as a multi is the best solution. Depending on how you are using RMX, a multi may be the best solution.
    A work around is to create a stereo RMX and make several copies of it.
    As you work with RMX on each of its channels, drag the midi file from RMX to an empty Logic RMX slot. If you open the event list to the right of arrange, you will see, that each corresponding channel from the RMX, is on a different midi channel. So although all your several tracks of RMX are the same, (make sure RMX is set to ALL channel), each individual track on the arrange pages is sending on a different midi channel
    So if you want to isolate one channel, to edit or to mix one individual part out - mute the others out either on the RMX. or Highlight the REGIONS on the arrange page and mute them. Do not mute module or you will get no sound..
    You do get fuller control if you set up a multi channel instance of RMX (say you want to eq, and compress each track of RMX individuallly in Logic) - but you have to go an extra step to turn each individual track into seperate audio, so sometimes the above is easier
    Remember that RMX has it's own EFX plug-in for each channel also - so you may not neccessarily have to use Logic's.

  • Stylus rmx and logic studio 8

    i need help asap pleasseee...i am using 8 tracks multi timbral for stylus rmx...and everything is good but there is one problem, anytime i do anything to one track it does it to the other...for example: if i mute one of the tracks then it mutes all of them....i want to have full control of each individuak channel....does anybody no the solution for this...thanx

    Yes creating the RMX as a multi is the best solution. Depending on how you are using RMX, a multi may be the best solution.
    A work around is to create a stereo RMX and make several copies of it.
    As you work with RMX on each of its channels, drag the midi file from RMX to an empty Logic RMX slot. If you open the event list to the right of arrange, you will see, that each corresponding channel from the RMX, is on a different midi channel. So although all your several tracks of RMX are the same, (make sure RMX is set to ALL channel), each individual track on the arrange pages is sending on a different midi channel
    So if you want to isolate one channel, to edit or to mix one individual part out - mute the others out either on the RMX. or Highlight the REGIONS on the arrange page and mute them. Do not mute module or you will get no sound..
    You do get fuller control if you set up a multi channel instance of RMX (say you want to eq, and compress each track of RMX individuallly in Logic) - but you have to go an extra step to turn each individual track into seperate audio, so sometimes the above is easier
    Remember that RMX has it's own EFX plug-in for each channel also - so you may not neccessarily have to use Logic's.

  • Stylus rmx and logic

    just got stylus rmx. I want to use rmx like I do BFD as a multi with auxes. does anyone know if it works the same way as BFD as far as configuration to seperate the sounds (kick, snare etc.) i watched the video but it seemed to focus more on rmx as a stereo plug.

    In exactly the same way.
    The Logic setup tutorial videos on your Stylus RMX disks describe and show you the process in full.
    Insert RMX as a multi channel instrument, set up your auxes to take the extra RMX outputs, then route whatever parts, sounds, edit groups etc to whichever RMX outputs you wish.

  • Settign up stylus rmx with logic pro

    I just got a new Macbook pro with an intel chip. I am trying to set it up with my stylus rmx, which is already set up on my g5. I downloaded the program but Logic is unable to find it under the audio units plug-ins like it does on my g5. Has anyone had this problem? Thanks. Dave.

    you can have it working of both your mac's you just need to make sure you have the UB version for the macbook. Think it's 1.5.1 (on there site once you have logged in)
    i have one copy working fine on both my machine's
    As it does say you are allowed upto to different computers

  • Problem with stylus rmx and LE

    hi folks!)
    have since short time following problem:
    when i take stylus rmx and collect a groove group, every thing is fine as long as i save in logic express, after saving rmx lost his connections to some grooves i have selected.
    could someone give me a hand?
    i also saved it as a new user "multi" in stylus, but also when i call this setting back i can't get the loops(sounds)
    konfig: powerbook g4 1,67mac - osX10.4.6 - logic express 7.2
    thxalot4yourhelp

    Hey,
    I believe there's an Universal update on that version you have, that can not be only for Intel, take a peak at Logic Pro Forum the guys have been posting on RMX yesterday.
    Cheers,
    Jorge

  • I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    eBay or Craigslist would be the only choice.

  • Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion.  Use the program Pacifist to install it.

  • HT4561 I have an iMac (2.66Ghz Intel Core 2 Duo) and recently updated to OSX10.6.8. At first things worked as before, but suddenly a bunch of applications are not working; including videos wont play in any browser, plus Skype and Logic Pro won't work

    Recently updated to osx10.6.8. Was fine at first, but now have problems with various applications freezing/hanging.
    These include Skype and Logic Pro.
    In addition, cannot play videos (including YouTube and BBC) on Firefox (my usual browser), Safari or Chrome.
    Application becomes frozen, and I eventually get an 'unresponsive script' message.
    With Firefox I have tried clearing the cache. My Flash is upto date.
    These are all the apps I use everyday, and this is driving me crazy. Can't seem to find answers on line. Very grateful for any help or advice.

    Please download this app ... etrecheck, run it, copy or paste the results and post them back to us here.
    From that we may be able to see more background to your problem.   Be assured, it is safe.
    Etresoft: EtreCheck

  • I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder.  This Update require Logic Pro Version 9.0 or higher".  I have Logic Pro Version 9.1.1 installed.

    I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder.  This Update require Logic Pro Version 9.0 or higher".  I have Logic Pro Version 9.1.1 installed.
    I even pulled the dmg file into the Logic Studio folder in my applications directory and it still does not recognize it.  What do I do now?

    Niel:  Thanks. 
    For others benefit, here is what happened.
    I had installed Logic Studio 9.1 some time ago.......not knowing what all the programs were nor what they did, I created a "Logic Studio" subfolder in my applications folder and put all Logic Studio programs into it so I'd know where they were and could review each at my leisure over time.
    My assumption now is that when the updater looks for the Logic Pro program, it looks only in the applications folder.  It seems lame that it would not also look in the subfolders of the applications folder, but that apparently IS the way it works.  Because my Logic Pro program was located in the "Logic Studio" subfolder, the updater just didn't see it..hence the error message I received when I tried to update. 
    Solution:  I moved all the Logic Studio programs out of the subfolder and now they reside in the applications folder. Ran the 9.1.5 updater and it worked like a charm. 

  • Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins, the session opens in the other computer but all the synths reset to presets

    Hi, ive been having trouble passing my logic sessions to another computer, we're both using a macbook pro 10.6.8 and logic pro 9 with the same plugins (native instruments komplete 7), the session opens in the other computer but all the synths reset to presets, this didnt happen the first time I shared a session, but its been happening lately quite often

    kwmlr439 wrote:
    CSOUND Read the title please:
    Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
    The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
    10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
    Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
    Message was edited by: Shootist007
    Message was edited by: Shootist007

  • Can you run Logic Pro 8 and Logic Pro X on the same machine?

    Hello all!
    Congratulations to us on the release of the new Logic Pro!
    I am still running Logic Pro 8 (and was waiting for X to come out since I knew it wasn't too far off) but am concerned over the loss of 32-bit plug-ins with Logic Pro X (the wrapping of my old VST plug-ins alone hurts!).  I've heard that installing Logic Pro X doesn't in any way gimp Logic Pro 9's usage, but can someone confirm whether or not Logic Pro X and Logic Pro 8 can operate in harmony on the same Mac?
    As a bonus, is there any reason to believe that Apple would disable earlier versions of Logic Pro (such as version 8) from running on Mavericks?
    I am planning my Logic Pro and Mac OS migrations!  Thanks!!

    Try here:
    https://discussions.apple.com/community/professional_applications/logic_pro
    This forum is FCP X.
    Al

  • External piano and Logic Pro

    Hello
    I have Logic Pro 9 and external keyboard KORG SP250
    I can play the keyboard and Logic Pro can record what I play from keyboard, it will play back as well, but it will use the speaker from the keyboard for output.
    I dont know how to redirect to the speaker of my computer
    Thanks in advance everyone
    TA

    You understand that MIDI is not audio (sound), it's only a simple set of instructions that describe the MIDI performance. It (MIDI) can be routed to and sound producing keyboard, module , virtual instrument... etc.
    In any case, you have it routed back to your keyboard so natually tha sound will come out of the keyboard, it's the keyboard that is producing the audio. If you want the sound to come out of the computer the audio outs of the keyboard have to be routed to the audio inputs of your sound card, an audio track selected, software monitoring enabled and the track record enabled. (that's one way)
    You could also create an instrument track, load a virtual instrument and slide the MIDI performance over to the virtual instrument track.
    If you're unsure of the terminology I'm using you might want to ge here and read:
    Exploring Logic Pro. 
    http://documentation.apple.com/en/logicpro/

  • 2012 MacBook Air running Photoshop and Logic Pro

    Looking to buy a laptop. The most I do with my current iMac is record music using logic pro, edit video in iMovie and edit photos in photoshop.
    I'm planning on travelling for a decent length of time and would like to continue to do this on a laptop.
    The weight and SSD of the macbook air are really appealing to me. I'm wondering if it will be able to perform the above tasks? I read some reviews of people using photoshop on a 2011 macbook air with no issues, and from what I understand, the cheapest 2012 macbook air 13' is faster then the ultimate macbook air of 2011?
    So I'm considering purchasing a 2012 MacBook air 13' with the 1.8GHz dual-core Intel Core i5 and upgrading the RAM from 4gb to 8gb.
    Will this be able to meet my needs? I say I will be editing photos and recording music with it, but I'm still really amateur and I'm sure my needs are also.

    Thanks for the reply DWB,
    USB should be fine as far as I can see. Is there a firewire adaptor just in case?
    I was planning on keeping an external drive, and if I wanted to edit any substantial amount of footage, transfer it from the external drive to the MBA hardrive then just edit it from there.
    The main thing I'm wondering about is wheter or not the applications photoshop CS6, imovie (maybe even final cut pro?) and logic pro will run smoothly on a 2012 13-inch 1.8GHv i5 macbook air with 8gb ram. 

Maybe you are looking for