Sub-items not supported for selected item(s) error in LSMW

Hi gurus,
Am working on BOM's data load via LSMW. Most of the item are stock items (L) but some of the items i am loading are Text items (T). Because of the customizing done in OS13 (that can't be changed apparently), the LSMW executed in foreground gives the message "Sub-items not supported for selected item(s)" (only as information, green message) and the dataload IS STOPPED.
Is there a way to :
-> change OS13 (allow sub-items for text items) : When i try i have an error message.
-> or to force LSMW program no to go on the sub items screens (this way the program does not stop and the BOM is created)
Thanks in advance for your answers,
Olivier

Found the solution my self all relations between dataload file and sub-items structure had to be suppressed in LSMW.

Similar Messages

  • Fixed quantity not supported for alternative items

    Hi dears,
    I was trying to configure in a Bill of Material a group of components marked together as "Alternative item", having the Fixed quantity indicator set (so the quantity is not in proportioned with the order quantity).
    However, when I do this action I have the error message no. 29485 "Fixed quantity not supported for alternative items", because a fixed quantity is not allowed for alternative items.
    Leaving out the fact that I don't understand for which kind of logic this should be done, do you know if there is any solution to achive the same result (use alternative item and each of them should be with fixed quantity despite th eorder quantity)?
    Thanks and regards,
    Giovanni

    Daily structure relationship step: remove relation
    CLOSING

  • GR of Delivery completed item not possible for line item of PO/SA ?

    Hi,
    Am unable to Receive Goods in MIGO an Error - "GR of delivery completed item not possible for line item of PO/SA"?
    Regards
    Mohammed Khaja Pasha
    +919550917395.

    Hi Mohammed Khaja Pasha ;
    Delivery Completed checkbox provides a lot of fonctionality like an additional delivery is not expected, but is possible. If you prevent posting of migo , you can benefit from system messages M7 163 and 254.
    You want to ensure that the delivery is made before the planned delivery date : Set message 254.
    You want to ensure last possible delivery date : Set message 163.
    However ;
    The open PO quantity of the PO item equals zero.
    The PO item is no longer relevant for materials planning.
    The PO item is ignored when letters urging delivery of overdue goods are generated.
    The PO item can be deleted and archived.
    You can specify whether the Delivery Completed checkbox is to be selected automatically.
    Regards.
    M.Ozgur Unal

  • Line item not relevant for payment release

    Dear Expert,
    When I select payment block : 'Payment Request' in FB60. Error Message appear "Line item not relevant for payment release".
    I also have set payment block in master vendor and  OBB8.
    Can you tell me why the error message still appear?
    Kindly need your help
    Thanks and Regards,
    YL

    Do you have any workflow variant in place?
    Moreover, when you have already set the Payment block at Master level, you need not to fix it in transaction level.
    Vendor itself will not get paid until unless you remove the block option
    Thanks

  • Migo cannot be done " PO does not contain any selectable items"

    Dear SAP Gurus
    We have a very urgent issue, while trying to do MIGO for a particular standard PO.
    Some down payments have been done to this PO already and now when we try to do the MIGO, system is giving the error "PO does not contain any selectable items"
    The accounting document which is created when the down payment is done can be seen in the purchase order History.
    Please suggest soem solution
    Thanks
    kk

    Hi Kavitha,
    Please check whether all the po item quantities are received. If any open line items are there then go to item detail po tab in that Select Confirmation Tab and Check whether the confirmation is Z001. Change it to 0001 etc and save.
    Try this, if unresolved revert back.
    Reg,
    Ashok
    Assign points if useful.

  • The ipad'osby media pro' could not be synced because this computer is not authourised for purchased item that are on this ipad.how can i solve this proble,i've authourised it several times

    the ipad'osby media pro' could not be synced because this computer is not authourised for purchased item that are on this ipad.how can i solve this proble,i've authourised it several times

    Hello, osbybass. 
    Thank you for the question.  This alert can mean that iTunes is recognizing applications on the iPad purchased by another Apple ID.  If anyone in your household has an Apple ID, try authorizing the computer with their Apple ID and attempt to sync.  If you are still experiencing issues, go through the troubleshooting steps in the attached article. 
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Cheers,
    Jason H. 

  • J1IEX post than made error like does not contain any selectable items

    Respected Sir,
    We have purchase the Goods From SEZ unit and it wil be treated as import made.
    We doing the following activities
    1. Prepared the Import P.O.
    2. released the same P.O.
    3. Doing the MIRO for Custome Vendor
    4. Capture the J1iex
    than we fins the below mention ERROR & Diagnoses and ERROR
    Document 4400000016   does not contain any selectable items
    Message no. M7064
    Diagnosis
    The document or document item entered cannot be adopted.
    Possible reasons for this are:
    u2022     The document items have already been processed
    (Suggest zero lines indicator set?).
    u2022     the document items have been deleted or are blocked.
    u2022     the document items have been created for a different plant.
    u2022     (for reservations only) movements are not yet allowed for the reservation items.
    u2022     (for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
    u2022     A confirmation must exist for the document items.
    u2022     The document items must be released first.
    u2022     The document is an R/2 document.
    Procedure
    Make sure your entries are correct.
    u2022     If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
    u2022     If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
    u2022     If the document is a purchase order, production order or a reservation, you can
    Kindly doneedfull above mention error
    Thanks & Regards
    Bipin Shah

    HI,
    Please check whether all the vendor and excise details have been maintained in J1id.  i.e Excise rate maintainance.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful

  • Document 4500016031   does not contain any selectable items

    Hi Friends,
    I am doing MIGO(godds receipt) and adopted following procedure for MIGO.
    ME5J----->(Entered my Proj. defn---> executed
    Select material T-20610.
    Click the "Assign automatically" pushbutton.
    Assign materials T-20620 and T-20630 the same way.
    Display the overview of the assignments and then create the purchase order.
    Click the "Assignments" pushbutton.
    The purchase requisitions are sorted in the overview according to their assignments. You can create new purchase orders by clicking the "Process assignment" pushbutton.
    Place your cursor on the line below vendor "C.E.B.".
    Click the "Process assignment" pushbutton.
    Confirm the first dialog box by clicking the "Continue" pushbutton.
    If another dialog box appears, click "New purchase order".
    The purchase order appears.
    On the left-hand side of the overview, select your three purchase requisitions and copy them to the purchase order.
    Click the "Copy" pushbutton.
    Save the purchase order.
    Click the "Save" pushbutton.
    The purchase order number appears in the status bar.
    Make a note of the order number:   ____4500016031________
    Now I got the PO as per above procedure Now While I am doing  MIGO---Goods receipt am getting the below message.
    Any pointers is appreciated and will be rewarded.
    Document 4500016031(PO)   does not contain any selectable items                                                                               
    Message no. M7064                                                                               
    Diagnosis                                                                               
    The document or document item entered cannot be adopted.                                                                               
    Possible reasons for this are:                                                                               
    o   The document items have already been processed                     
            (Suggest zero lines indicator set?).                                                                               
    o   the document items have been deleted or are blocked.                                                                               
    o   the document items have been created for a different plant.                                                                               
    o   (for reservations only) movements are not yet allowed for the      
            reservation items.                                                                               
    o   (for reservations only) the document items are retrograde components 
         of the order. These are posted using the order confirmations.                                                                               
    o   A confirmation must exist for the document items.                                                                               
    o   The document items must be released first.                                                                               
    o   The document is an R/2 document.                                                                               
    Procedure                                                                               
    Make sure your entries are correct.                                                                               
    o   If the system has already processed the total quantity, you can set  
         the Suggest zero lines indicator. The system will suggest the        
         quantity zero for the items that have already been processed.                                                                               
    o   If you have entered a particular item, cancel the item. If you do    
         not enter an item, the system searches all of the open items in the  
    o   If the document is a purchase order, production order or a            
         reservation, you can enter search criteria in the dialog box.         
         You access the dialog box by choosing Enter with reference on the     
         initial screen.                                                                               
    o   If the document is an SAP R/2 document, you have to cancel it         
         manually by entering the reversal movement type.                      
    Regards

    Hi
    Check item level Confirmation tab I think this PO is activated for Inbound delivery or Confirmation control
    vIVEK

  • "SQL Server 2008 Reporting Services does not support map report items"

    Hi,
    I am trying some new feature that are introduced in SQL Server 2008 R2 version. While I try to use "Map" control within it, it threw the following error:-
    "Error 1 The map, Map1, was removed from the report. SQL Server 2008 Reporting Services does not support map report items. "
    -Also, similar kind of error I am getting for "Indicator" control.

    Hi Tej,
    I think you get this error message when you are deploying a report to report server using BIDS, correct?  If not, please provide more details on your scenario :-)
    If I guessed correctly, then this message is a result of trying to deploy a map report (a SSRS 2008 R2 feature) to a non-R2 2008 report server.  When deploying a report of RDL2010 format to a non-R2 report server, BIDS will downgrade the file to RDL2008 format, so that the non-R2 report server can process it.  Any report elements using features not supported in RDL2008 will be dropped during this downgrade process.
    BIDS gets the server version from a report project property called TargetServerVersion:
    http://technet.microsoft.com/en-us/library/ee635898(SQL.105).aspx
    If your report server is indeed the 2008 R2 version, then the TargetServerVersion property should be set to "SQL Server 2008 R2 Reporting Services."  The project property page also has a "Auto Detect..." option if you are uncertain about the version of your report server.
    Hope this helps!
    Cheers,
    LawrenceThis posting is provided "AS IS" with no warranties, and confers no rights.

  • Item availability for selected items and directly create the delivery

    Hi All,
    For a very big sales order ..lets say having 700 line items ...is there any convenient way to create the delivery for selected items ..e.g. 30-40 line items rather going and selecting the line items then doing the item availability.
    do you have any LSMW format by which we can do the item availability for selected items and directly create the delivery.
    kindly Guide me..
    With Regards
    Azeez.Mohd

    Hi ,
    There is no stand way of doing it . You need to take help of abaper to do this :
    1. Create a t code where if you give sale order number , it displays a report with all the items with a check box near to it as we see in SE16 .
    2. This report could be best in ALV form where users can do "ctr+f" and search only the required materials then select those lines and press a button on the top of report .
    3. Once the button is pressed , program will run vL01n ( create delv in backgrnd) in a BDC form . At time of delev creating , the bdc program in backgrnd uses only those items which were selected by user and not the other items .
    4. Program will create a delv using a BDC in background and return the delv number for user to view tht.
    U can also try using FM : RV_DELIVERY_CREATE to create delv in backgrnd after user selection if BDC is getting tricky.
    Hopefully ,this shuld work and will be a easy process for the customers.
    Let us know the outcome .. .
    B O L ..
    Hope this Helps !!!

  • VL01N - indicator: Item not relevant for goods movements

    Hello Everyone
    When creating a new delivery, into the administration tab of the Item detail, there is an indicator:
    "No goods movement" into the control data box.
    Based on SAP help:
    When this indicator is set, goods movement is not posted for this item - regardless of the movement type assigned  to it.
    My problem is: that field is not selectable(It is in grey). So we cannot change it. How can we set that field?
    Regards
    stjacqd

    Dear Dstj,
    Check the movement type before that No Goods Movement check box it should be 601 for outbound delivery.Due to wrong movement type check box get activated.
    If you are allow to chenge that movement type then change and try.
    If movement type is incorrect then take help of MM consultant to set the movement types properly.
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Nov 15, 2008 6:52 AM

  • Sourcing: Propose sources for selected items

    Hi
    I am running SRM 7.0 in classic scenario - for now in a demo environment. I try to figure out how the sourcing work if I have contracts.
    I creates a central service contract in SRM. This is not replicated to backend at the moment but do it have to be replicated to backend to be proposed as source for my shopping cart in the sourcing cockpit?
    I have created a contract in backend (and only in backend) and this is visible in "Propose sources for selected items"
    Another issue I have is in the following process.
    1. A user creates a SC with a service item (text item)
    2. This goes to Purchasers worklist
    3. Purchaser creates RFx and select bidders
    4. The bidders respond
    5. The Purchaser select the best offer and creates a contract.
    6. The SC is not possible to order anymore so the Purchaser creates a copy of the original SC (on behalf of the user who create  the SC in the first place).
    7. I expect that the contract I created in bullet 5 would be proposed as source of supply in the new SC but it isn´t :-(
    I therefore wondering if it is because the contracts is not replicated to backend at the moment?
    Note:
    I order a text service item and I have filled the Supplier Part number in both the contract and SC but this do not help.
    Hope anyone can help me

    Hello,
    If you are using classic scenario, only backend contracts will be proposed as SOS.
    This means that if you create a central contract in SRM, it should be replicated to ECC in order to be used as source of supply.
    SRM contracts can be used as SOS only in case of extended classic and local scenarios.
    Regards,
    Ricardo

  • Error in RFx : Item type 'Service' not allowed for this Item

    hi , experts,
      We use SRM7.0 in Standalone scenario .
      i get an error when i transfer SC to RFx :     Line 0001: Item type 'Service' not allowed for this Item .
    if someone kindly tell me how to correct this Error.
      another question is ,in the Standalone scenario , can we create Service Master with multiple level(hierarchy) use Tcode 'COMMPR01 ' ?
       reagrds
               claud

    Hi Claud,
    SRM does not support hierarchy in service for operational documents like PO, contract, confirmation and invoice in SRM 7. It does support hierarchy in service only for RFx doucments. You need to activate the hierarchy template for SRM for that.
    Thanks and regards,
    Ranjan

  • Error in CNS0 :Sales unit is not valid for the item

    Dear Team ,
    we are using assembly process ,after creation of project from sales order ,requirments are pass to production planning (PP), Asign the bom to activites then we are going to delivery through project (cns0) at the time system shows error" sales unit is not valid for the item" we check the options in material master .please  help me on this issue.
    Thanks &Regards
    R.B.RAO

    Have a look at the following note:-
    Note 140551 - VL384 Stock transport order and batch selection
    G. Lakshmipathi

  • Full Screen in CS5 and CS5.1 is not Supporting the Menus Items like CS4 This is happening while

    Full Screen in CS5 and CS5.1 is not Supporting the Menus Items like CS4
    This is happening while working in the balck screen and using shortkut Keys for top menu. the tools are woring, but while using Alt Key to choosing the menu item. its not supporting. like the older vesions
    please answer me

    Can you please be a little more clear about what you expect it to do vs. what it's doing.
    Are you using the "Full Screen With Menus" mode or the complete "Full Screen" mode?  I just tried the "Full Screen With Menus" mode and was able to use the Alt key to initiate menu operations.
    -Noel

Maybe you are looking for