Subcontracting Material return date after 180 days

Dear all,
We have issue while reconcilling challan against material documents,some cases excess cosumption/under consumption while doing GR & Single GR is done for different challans, due to this we are unable to
close challan against return date,now challan return date exceede by 180 days,in J1IFR,it is showing red status,
Stock is not available @ subcontractor or at our end,Entire parent componets were received,
How to reconcile & complete challan ?
Jeyakanthan
Edited by: Jeyakanthan A on Apr 7, 2010 8:01 PM

Anyone share your valuable views/ideas ????

Similar Messages

  • Subcontracting regularization after 180 days

    Dear Sir,
    We have a scenario where we had  sent a material for outside processing using SUBCONTRACTING PRCEDURE .
    We had done the following activities :
       a) Created a Subcontract Purchase Order
       b) Transfer the required Material to Vendor Stock
       c) Generated a Subcontract Challan
    Since from challan date , 180 days have been elapsed .  After 180 days , now we have received the Processed Material from Vendor . 
    SAP System is not allowing now GR as 180 days have been elapsed .
    Kindly guide us as what steps need to be performed , so that GR and Challan regulrization can be exercised .
    Rgds
    Sonia Agarwal

    Hello,
    If the allotted number of days elapses and the subcontractor has not returned some or any of the materials in the challan (status: Posted or Assigned), you must reverse the excise duty that you have credited to your CENVAT account.
    If a subcontractor returns materials after the return date, you can recredit the excise duty credit that you have reversed.
    Completing Subcontracting Challans :
    1. From the SAP Easy Access screen, choose Indirect Taxes - Procurement - Subcontracting - Subcontracting Challans - Complete/Reverse/Recredit.
    2. Enter the challan number and year.
    3. Choose This graphic is explained in the accompanying text.
    4. Select Complete Challan.
    5. Save the challan.
    The Excise transaction type for subcontracting challan is 57NR. The G/L accounts has to be assigned to the transaction type and excise group combination is SPRO-LO Gen - Tax on goods movement
    Regards

  • Sales Return from Customer after 180 days

    Hi,
    I have a requirement on sales return, if the return is done after 180 days, government does not allow to adjust the respective tax amount relating to that return goods.
    For example:/sales invoice:
    Customer Dr 110
    Tax          Cr   10
    Sales       Cr 100
    In case of return this entry will reversed (if it is partial partial amount will be reversed).
    Requirement:
    If the return is happened after 180 days, tax reverse can not be accepted.
    In this case what is the scenario.
    1.  Is this tax amount goes to Tax expnese account (Dr P/L account)
    2.  Is this tax amount added to Material Stock value
    Please update me which more details.
    Thanks
    Partha

    Hi,
    Perhaps Note 34526 - Delivery free of charge and value-added tax will suggest you a solution. You must handle it with a VOFM in the pricing procedure.
    I hope this helps you
    Regards,
    Eduardo

  • Material received after 180 days

    Hi,
    We have a requirement of Challan Report, which has been exceed 180 Days and received. Means after 180 days received the material's.
    How can i find the received materials list after 180 days..
    please tell me table name from which i can refer data and if any standard report exist for this, please tell me...
    we have following fields:
    Challan No.....     Challan Date.....Vendor Code..........Material.........Qty..........Received Date.........Total No. of Days
    Regards,
    Anil Kumar

    Hi Anil,
    In purchasing you can find the PO date for the PO which has the material in 'EKKO-BEDAT'. And the receipt of the material date can be found from MKPF-BUDAT, for the material document corresponding to the PO.
    This can be found from EKBE. Then You calculate the difference between MKPF-BUDAT and EKKO-BEDAT and check whether this is more that 180 days. I am not sure whether this will meet your requirement, but you can try this...
    Regards,
    Birendra

  • After 180 days in subcontracting ??

    hi
    How we can do the subcontracting cycles after 180 days with excisable materials .
    For example , i have sent 100 no's to subcontractor , i have received 50 no's before 180 days .
    Balance 50 no's how i can receive from subcontractor ??
    Thanks
    SAP-MM

    HI,
    The materials have not been returned to you within a given length of time specified by the law( 180 days), you will have to reverse any excise credit that you posted when you purchased the materials . In the case of materials that you have manufactured in-house, you will have to post credit entries to the extent of the CENVAT rate of the assessable value of the materials.
    Process:
    Reverse the excise duties in J1IF13.(This transaction is basically used to complete the challan if you have reconciled as stated above step. There may be cases subcontractor may not able to supply within stipulated 180 days limit then in this case also same transaction is used for reversal of challan or re-crediting the amount.)
    Do the reconciliation in J1IFQ
    After recredit the excise duties, complete the challan in J1IF13
    Regards
    KK

  • Sales returns after 180 days

    Dear team,
    I have one doubt in return order creation. There are two scenarios while creating return order, (1) if customer returns within 180 days (from invoice date) than i need to give him full credit (base price as well as tax) and (2) if customer returns after 180 days of invoice than only base price needs to be credited. Tax amount shoud not be credited.
    How can i map this in SAP ?..
    your helpful answers will be rewarded by points...thanks in advance...
    Thanks and regards,
    Tarpan Vadalia

    Hi
    While creating sale order, go to item or header billing screen, you have ALT Tax classific (at header) - select 0 to Tax exempt.
    At item level -billing - tax classification - select 0
    thank you
    Anirudh

  • Challan Reconcilation after 180 days.

    Hi all,
    How to Reconcile the material document with Challans
    what is the process if the challan is not completed within 180 days.
    case -01   FG material document is posted after 180 days completion after making the challan.
    case-02     FG material document is posted within 180 days but challan is not reconciled  (or) not Completed, Can it be reconciled after 180 days completion.
    With Rgds,
    Krishna

    Hi Piyush,
    whether the challan is tobe reconciled even after Reversing or what?
    I have one more query ,
    One of my user in MIGO for a particular material document have un-checked the components @  the time of receipt of a particular FG item.  where as for the remaining FG parts  - components exist within a material document.
    but my problem is system is not allowing me to reconcile the remaining component , it is throwing warning message for the FG material for which  components are not consumed.
    With Rgds,
    Krishna.

  • Closing of 57F4 Challan or Making GR after 180 Days

    Hi,
       I want to know  if we have made a 57F4 Challan   and partial material we have received from the vendor  and remaining material we have not recd  till the specified period of 180 days  then how to make the GR after 180 Days  or how to close the challan
    second scenarion  if we have send material to vendor with 57F4 channlan  and we have not receievd  material  with in 180 Dya  then  how to close the challan.
    regards,
      zafar

    Hi niti,
        Thanks for reply,  i want to know  even  if after 180 days we have not receieved the material  and if we want to cancel  all the document how is the sequemce and process for it  as we have created PO  ,  MB1B,  and J1IF01 challan  then  how to cancel all the documents
    and as u have steps for making GR after 180 Days  with J1IF  this is std. procedure avalibale for this   is there any effect of this on other FI entry etc.
      regards,
        zafar

  • Week ending date after 365 days in sql

    Hi Experts,
    I need to find the week ending date after 365 days of the given week start date .
    Example : Week start date : 23-Jan -2011 (Sunday)
    Desired week end date : 28-Jan-2012 (Saturday)
    How to achive this through sql ?
    Thanks .

    Hi,
    Check below this may help you, adjust "(t.day_num+1)" as per your requirment.
    with t as
    (select decode(to_char(trunc(sysdate + 365), 'dy'),'mon',1,
                                                      'tue',2,
                                                      'wed',3,
                                                      'thu',4,
                                                      'fri',5,
                                                      'sat',6,
                                                      'sun',7) day_num
                                                      from dual
    select to_char(trunc(sysdate + 365)+ (7-(t.day_num+1)),'dd dy-mm-yyyy')   
                                                      from t ;

  • Subcontract challans after 180 days

    Hi All,
    Can some one tell me the process, what we need to do if the Subcontractor does not return our components within 180 days?
    Please give the details step by step.
    Regards,
    Sattuj

    hi,
    what exactly the excise says ______
    1) if vendor fails to return material which is excisable then u have to pay excise which u have not done earlier.due to provision of 57f4 challan.
    now how u r doing that_____
    1 u have to scrap the material which is at vendors end actualy it is ur property
    2 u have to create an excise invoice thro J1IS trasaction that means u are selling material to vendor
    3 because of this ur cenvat clearing account gets affected means nullifies with cenvat payable.
    4 again u have to pay excise duty for scrap generated.
    thats all,
    reward if useful
    sujit

  • Handling Excise for the subcontract components after 180 days

    Hi All,
    Can some one tell me the process, what we need to do if the Subcontractor does not return our components within 180 days?
    Please give the details step by step.
    Regards,
    Sattuj

    Hi Sattuj,
    If the subcontractor doesnt return the component within 180 days u need to follow following steps-
    1.TCode-j1if13.-Complete/Reversal/Recredit-  Reverse challan.
    All duties will get reversed.
    2.TCode-j1if13.-Complete/Reversal/Recredit-  Recredit challan.
    All duties will get recredited.
    3.Create GR for the purchase order and provide the reference of Challan created.
    4.Reconcile and Complete  the Challan
    5.Check RG23A part 2 entries for transaction type 57NR and 57RC in table J_1IPart2
    6.Extract RG23A Part 2 register and download the entries in excel through J2I6
    Hope this helps.
    In case of any clarification please respond back.

  • Challan reconciliation after 180 days.

    Hi all,
    I have been using subcontracting process as an alternative for returnable gate pass. Where in we are sending material by 541, doing chalan against that document & then taking material back by 542 & reconcile chalan against document of 542. But in one case it crossed 180 days limit, and now system giving msg as can't reconcile as return date crossed.
    Now my question is can I follow the normal process i.e. cancel the chalan with J1IF13, then reconcile the chalan.
    Whether this will have any effect on excise accounting? Please brief me about the effect.
    Thanks & regards,
    Sarang

    Thanks Jafar,
    Actually we are not doing subcontracting process, we are sending material for repairing purpose for which we configured RGP process through subcontracting process. Here we are not using any Subcontracting PO. Only we are sending material by 541 movt & printing RGP (as 57F4 where in its heading is mentioned as RGP) & getting material back by 542.. So now tell me if I follow the path i.e.
    1) Reverse the challan (J1IF13)
    2) then 542 (as we do)
    3) then J1IFQ
    So will it cause any impact on my excise tables. Also in which fiscal year it should cause. That cahllan is of Jan 2011 (fiscal year 2010)
    Regards,

  • Material Availability Date on Closed Day

    Hi,
    We have an issue whereby a customer order is dated out correctly to the new year on an open day ie 05.01.2010 but the material availability date is falling on a closed day ie 30.12.2009.
    I've checked both the factory and holiday calendars and these are all showing correct closed and open days.
    Any thoughts?
    Thanks in advance.
    Mike

    Hi Mike,
    SD scheduling is tricky stuff...
    There is also a calendar for the shipping point.
    Did you evaluate if it has any impact on sales order scheduling?
    The truth is that I am not sure about it. Just trying to help.
    This is the point where debugging might be the fastest way to get an answer. If you can find the function name for date determination, put a break-point there!
    Best Regards,
    Franck

  • Very Strange- Mail changes all dates after two days

    I have a very strange behavior:
    Apple Mail changes the date-information of incoming and outgoing mails after about two days -
    for the first two days it says "today" or "yesterday" after that it changes all dates to one single date (december 12.2009 and some to december 12.2010).
    I just put in a new pram battery, so this cannot be the problem.
    what the heck is this?

    Hi Noe, do you have anything in Rules that is set to happen after 2 days?
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup

  • What's the details of the return data after calling Application.RegisteredFunctions?

    Application.RegisteredFunctions returns 3 columns. The last column is described as "Strings specifying the data types of the return values, and the number and data types of the arguments". Does anybody know the details of it? Is there a table
    showing which string specifies which data type? Thanks!

    From MSDN:
    Data Types
    The pxTypeText argument specifies the data type of the return value and the data types of all arguments to the DLL function or code resource. The first character of
    pxTypeText specifies the data type of the return value. The remaining characters indicate the data types of all the arguments. For example, a DLL function that returns a floating-point number and takes an integer and a floating-point number as
    arguments would require "BIB" for the pxTypeText argument.
    The data types and structures used by Excel to exchange data with XLLs are summarized in the following two tables.
    The first table lists the types supported in all versions of Excel.
    Data type
    Pass by value
    Pass by ref (pointer)
    Comments
    Boolean
    A
    L
    short [int] (0=false or 1=true)
    double
    B
    E
    char *
    C, F
    Null-terminated ASCII byte string
    unsigned char *
    D, G
    Counted ASCII byte string
    unsigned short [int]
    H
    16-bit WORD
    [signed] short [int]
    I
    M
    16-bit signed integer
    [signed long] int
    J
    N
    32-bit signed integer
    FP
    K
    Floating-point array structure
    Array
    O
    Three arguments are passed:
    unsigned short int *
    unsigned short int *
    double []
    XLOPER
    P
    Variable-type worksheet values and arrays
    R
    Values, arrays, and range references
    In Excel 2007 the following data types were introduced to support the larger grids and long Unicode strings.
    Data type
    Pass by value
    Pass by ref (pointer)
    Comments
    unsigned short *
    C%, F%
    Null-terminated Unicode wide-character string
    unsigned short *
    D%, G%
    Counted Unicode wide-character string
    FP12
    K%
    Larger grid floating-point array structure
    Array
    O%
    Three arguments are passed:
    signed int * / RW *
    signed int * / COL *
    double []
    XLOPER12
    Q
    Variable-type worksheet values and arrays
    U
    Values, arrays, and range references
    Starting in Excel 2010 the following data types were introduced:
    Data Type
    Pass by value
    Pass by ref (pointer)
    Comments
    XLOPER12
    X
    The asynchronous handle is used to track a pending asynchronous function call by Excel and the XLL.The existence of the parameter type in the type string also designates the function as asynchronous.For more information about asynchronous functions, see
    Asynchronous User-Defined Functions.
    The string types F, F%, G, and G% are used for arguments that are modified-in-place.
    When working with the data types displayed in the previous table, be aware of the following:
    The C-language declarations assume that your compiler uses 8-byte doubles, 2-byte short integers, and 4-byte long integers by default.
    All functions in DLLs and code resources are called using the __stdcall calling convention.
    Any function that returns a data type by reference, that is, that returns a pointer to something, can safely return a null pointer. Excel interprets a null pointer as a #NUM! error.
    Charles Excel MVP The Excel Calculation Site http://www.decisionmodels.com/

Maybe you are looking for