Submit e-mail button returns "one of the specified recipients is not resolvable" error
I have created a form in Acrobat X and have an e-mail submit button which isn't quite working. In Acrobat X, when I click the button it proceeds normally (promts me to send an email with the form attached.) In Reader X, however, it returns the error message "one of the specified recipients is not resolvable". I know for sure that not only are the addresses just fine, but that the whole mailto: link is fine since it works in Acrobat without problem.
I've searched everywhere and there seems to be fairly limited issues with this error message, and the few posts I did see usually dealt with LifeCycle.
Here is the form so you can take a look at it: https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0BxFDv0ai-FUPYTkzZWYyM2U tOTI1ZS00MDgzLWI5ZDUtNzg1YjUyMTRjMTc2&hl=en_US
I really appreciate any help anyone can give me!!!
I made typo on this thread only. It is correct in the form. I removed the semi-colon. Same thing happens. It works fine on the email program on my desktop (Windows Mail) where I have corresponded with the email address for the registrar. It does not work on my laptop (Windows Live Mail) where I have not corresponded with the email address for the registrar.
It seems to occur when the mail program doesn't find a match. I press OK but then it shows "One of the specified recipients is not resolvable"
form is located at http://www.cslittleleague.com/wp-content/uploads/2014/01/CSLL-Reg-Form-8.pdf
Similar Messages
-
An attempt to open a pdf file with Photoshop Elements (version 12) resulted in a pop generated by the Photoshop Editor stated "Impossible to execute this operation (opening file) because one of the specified colour is not managed". Is there any mean to adapt the file to make its reading possible?
Did somebody get the same problem?It is a high order probability that your SQL's report generator is creating the PDF, not Acrobat (which by design and EULA cannot be used in as/with server).
That the report generator outputs to an old-old version of PDF bears this out.
Wiki articles on PDF are very nice for those high level intro summaries.
To know / understand PDF you purchase and study the ISO Standard for PDF (ISO 32000-1:2008).
Rather than "PDF validation" you may want to consider addressing the appearent root cause of the problem(s).
You can change the email2fax application to one that can deal with older PDF versions.
You can change the report generator to one that can output to the ISO Standard.
(Perhaps the in-use application can be configured to output to the current version of PDF (i.e., the ISO Standard).
Be well... -
How to get the submit and Reset buttons on bottom of the page?
while viewing a parametric form in the web browser i get SUBMIT
and RESET buttons on the top of the form which doesnt look good.
I tried pasting the whole html available by default in the
Before Form Value(where the submit and reset buttons are
defined) in the After Form Value property of the report property
pallette. Though the layout appears as i wanted but its not
passing the parameters values to the query but generates an
error " REP-0788 Warning : The value of restricted LOV parameter
BV_FROM_DATE is not among the selected values.". What can be the
solution to this problem? Your Help is much appreciated. And
also the report generated in the Runtime Previewer shows all the
colors of the fields but its not shown on the web browser where
can i define them...Your Help!!!!Thank you very much in
advance..when you select 'list of values for the parameters' there is a choice box that says 'restrict list to Predetermined values'. Don't select it. This will solve your first problem.
Second:When you run the report on the web you must choose ' desformat=htmlcss' then you can display the report as in the preview window. But still you can't see the same view in the web browser on report builder. It is still not good. As I sad before you can see the right view when publishing on the web. -
Push button in one of the columns of Table Control
Hi,
I have a requirement, where i have to display a push button in one of the columns of table control for long text. When user clicks on the control, a pop up has to be appeared in which user should be able to enter some meaning ful description and save it. please suggest me how to do this requirement.
Best Regards,
Phani Kumar. SHai,
You can drag n drop a button to the required column in the table control and give the required parameters like ok_code , name etc.
You can now place a text field as the heading of the column.
Now when the user clicks the the button in a row, read the corresponding line in which he has clicked.For that u can use
get cursor lines wrk_line.
now u'll get the data in that row using
Read table it_tab into wa_tab index wrk_line.
now u can call the text editor (using FM's READ_TEXT ,EDIT_TEXT and CREATE_TEXT in which the user can enter the meaningful description and save it.
When u save the text entered save it with a key part of the row that was read earlier(keep it as the text name).
So now if u need to get the description which was entered earlier u can easily read the text (using READ_TEXT ).
I hope this will be helpful for u .
Thanks
Neeraj -
Trying to find a button within one of the templates
Hi,
There is a button in one of the templates that shows up as
"Current button" when I access its properties. When I look in the
buttons folder within the gallery within Captivate, I cannot find
the orignial image. I need this image so that I can make some
changes/copy.
Any ideas,
thanks
LisaKimbermanNC wrote:
I'm not 'in a corner'. I have other resources. I'll handle this upcoming shoot. But I am bitterly, bitterly disappointed that Adobe is so indifferent to the needs of their professional photographer clients and so maddeningly inaccessible when approached for customer service.
So what other D750 tethering resources do you plan to use? This is a user-to-user forum–That information would be very helpful to other Nikon D750 owners who find this post.
I shoot tethered using a LR "watched folder" for auto import. Why would I do that when LR5 supports tethering with all my Canon DSLR cameras?
I use the free Canon EOS Utility, which supports live view mode and ability to change camera and flash settings on my system monitor. Lightroom currently only provides a remote shutter release and visual indication of the camera settings........and nothing else!
You can find similar apps here that support tethering with your Nikon D750:
http://www.tethertools.com/tethering-software/ -
Field "VAL6" is unknown. It is neither in one of the specified tables nor
Hello
In following report:
"REPORT ZRSETESTD.
data: val1 type t value '000000',
val2 type t value '240000',
val3 type d value '20000101',
val4 type d value '20080415',
va15(30) type c value '/CWM/STPPOD',
va16(30) type c value 'ZRHRMD_ABA'.
SUBMIT RSETESTD
WITH gs_creti BETWEEN val1 AND val2 SIGN 'I' "assuming CREATED_AT is select option in RSETESTD program
WITH gs_creda BETWEEN val3 AND val4 SIGN 'I' "assuming CREATED_ON is select option too
WITH gs_mesty BETWEEN val5 AND val6 SIGN 'I'."
I get error:
"Program ZRSETESTD
Field "VAL6" is unknown. It is neither in one of the specified tables
nor defined by a "DATA" statement . . . . . . . . . ."You have declared "va16" change it to VAL6.
-
I try to receive data from a SharePoint List by using REST Services. (_vti_bin/ListData.svc)
This approach worked fine for some days, until I get an error 400 with following error message:
"The etag value 1 specified in one of the request headers is not valid. Please make sure only one tag value is specified and is valid."
Hope anybody can help.
Many thanks in advance.
Hi,
According to your post, my understanding is that you had an issue about retrieve data form list using REST in SharePoint 2010.
I had created a simple demo to retrieve a list item, you can check with the following code snippets.
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
_spBodyOnLoadFunctionNames.push("callCSOM");
function callCSOM()
$("#Button1").click(function()
ExecuteOrDelayUntilScriptLoaded(ready, "sp.js");
function getListItemById(webUrl,listName, itemId, success, failure) {
var url = webUrl + "/_vti_bin/listdata.svc/" + listName + "(" + itemId + ")";
$.ajax({
url: url,
method: "GET",
headers: { "Accept": "application/json; odata=verbose" },
success: function (data) {
success(data.d);
error: function (data) {
failure(data.responseJSON.error);
function ready(){
getListItemById('http://sp','ListB',2,function(data){
alert(data.Title);
function(error){
console.log(JSON.stringify(error));
</script>
<input id="Button1" type="button" value="Run Code"/>
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Hello
My subca certificate was about to expire so I renewed it with the same key and since then my wireless will not connect. I get the following error from NPS:
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID:
AD\4411CB8CD34A2AA$
Account Name:
host/4411CB8CD34A2AA.ad.***.org
Account Domain:
AD
Fully Qualified Account Name:
AD\4411CB8CD34A2AA$
Client Machine:
Security ID:
NULL SID
Account Name:
Fully Qualified Account Name:
OS-Version:
Called Station Identifier:
f4-1f-c2-e6-0e-40:***-private
Calling Station Identifier:
e0-06-e6-c2-96-b7
NAS:
NAS IPv4 Address:
10.0.2.85
NAS IPv6 Address:
NAS Identifier:
DOM-WLC1
NAS Port-Type:
Wireless - IEEE 802.11
NAS Port:
13
RADIUS Client:
Client Friendly Name:
NPS Proxy 1
Client IP Address:
10.0.2.12
Authentication Details:
Connection Request Policy Name:
Wireless Clients
Network Policy Name:
Wireless Clients
Authentication Provider:
Windows
Authentication Server:
DOM-DC1.ad.****.org
Authentication Type:
EAP
EAP Type:
Microsoft: Smart Card or other certificate
Account Session Identifier:
Logging Results:
Accounting information was written to the local log file.
Reason Code:
295
Reason:
A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
How do i make the policy provider trust this new certificate that was created? When i renewed the certificate everything looks good on the subca and root ca. The new certificate is not in the nps servers so i tried manually importing it and that still did
not work. I noticed when i open the wireless network policy properties under constraints and open the Microsoft: Smart Card or other certificate eap type the new certificate is not in there. Any suggestions? Thank you!can you copy client certificate to NPS server and run the following command against this certificate:
certutil -verify -urlfetch path\clientcert.cer
and show us the output.
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool. -
Hi all.
I have stanalone offline RootCA, and enterprise domain SubCA on DC on Windows 2012 server. I have Windows 2003 Terminal Server, users logon to TS via smart cards - and this work fine.
Now I added Windows server 2012 as "Terminal Server".
Now I added Windows server 2012 R2 as "Terminal Server".
I configured both servers identically.
Users can logon via smart card to Windows Server 2012.
Users CAN NOT logon via smart card to Windows Server 2012 R2.
When user trying to logon via smart card, they have information:
"An untrusted cartification authority was detected while processing the domain controller certificate used for authentication. Additional information..."
I run a certutil.exe -scinfo on both Windows 2012/2012R2 servers.
I found differences in the (~) same place in the output log.
On Windows 2012:
Exclude leaf cert:
b4 44 8f fb fb b4 5f 03 39 76 dc cc e8 da 02 e0 d0 cc b6 32
Full chain:
c8 3d 07 12 ea 4d 0e 5a 8c 50 fc 56 2e 51 f1 68 6a 26 90 77
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.5.5.7.3.2 Client Authentication
1.3.6.1.4.1.311.20.2.2 Smart Card Logon
On Windows 2012 R2:
Exclude leaf cert:
78 7e 6c 60 3f 20 c6 f6 e8 74 c8 36 e3 d3 88 ac 12 60 41 32
Full chain:
b8 a9 fa 6c db 07 cd 32 86 17 8c 88 02 ba d0 4b 8c ac 2d 58
Issuer: CN=XXX CA, OU=Certification Services, O=XX, C=XX
NotBefore: 2013-11-22 12:42
NotAfter: 2014-11-22 12:42
Subject: CN=XX Test, OU=XX, OU=UXX, DC=XX, DC=com
Serial: 7a0084f
SubjectAltName: Other Name:Principal Name=XX@XX
Template: Smartcard Logon Behalf 2048
1d 2a bb dc 2a 9c 70 0d b5 35 47 44 ee 61 60 ab 71 97 66 ff
A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider. 0x800b0112 (-2146762478)
I run a certutil -verify xx.cer on both Servers 2012/2012R2 and on both servers have the ~exact same thing.
Windows 2012:
Exclude leaf cert:
f6 0e 96 da c7 08 9a 78 12 97 a6 b6 22 df 57 9d e7 03 41 df
Full chain:
f0 fb 19 66 e8 6c 4f ea b4 d5 ea 6d 5e 38 54 07 b0 9f 52 96
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.4.1.311.20.2.2 Smart Card Logon
1.3.6.1.5.5.7.3.2 Client Authentication
Leaf certificate revocation check passed
Windows 2012 R2:
Exclude leaf cert:
84 18 5b 9d 06 61 60 73 c6 37 80 f4 25 33 c4 d3 5e ef 4a 93
Full chain:
63 8e 9e 37 78 c9 93 bb 4d da f4 e3 4b 7e 2b 14 49 28 0f 5d
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.4.1.311.20.2.2 Smart Card Logon
1.3.6.1.5.5.7.3.2 Client Authentication
Leaf certificate revocation check passed
Whether Windows 2012R2 is not trying to build a certificate path, treating smart card logon certificate as (Sub)CA certificate?
Previous and probably wrong idea:
The only thing that comes to my mind is my SubCA.
I have two CA Certyficates:
Certyficate #0 (expired)
Certyficate #1 <- valid.
I guess that all Windows before Windows 2012 R2 build certyficafion chain from valid (second #1) certyficate. Windows 2012 R2 take first and we have:
"A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
[ value] 800B0112 "
This is a bug or feature?
How I can fix this without removal Certificate #0 from my SubCA?
Best regards
Jacek Marek
MCSA Windows Server 2012Hi,
Glad to hear that the issue is solved!
Thank you very much for your sharing!
Please feel free to let us know if you encounter any issues in the future.
Best Regards,
Amy -
Hi all.
I have stanalone offline RootCA, and enterprise domain SubCA on DC on Windows 2012 server. I have Windows 2003 Terminal Server, users logon to TS via smart cards - and this work fine.
Now I added Windows server 2012 as "Terminal Server".
Now I added Windows server 2012 R2 as "Terminal Server".
I configured both servers identically.
Users can logon via smart card to Windows Server 2012.
Users CAN NOT logon via smart card to Windows Server 2012 R2.
When user trying to logon via smart card, they have information:
"An untrusted cartification authority was detected while processing the domain controller certificate used for authentication. Additional information..."
The only thing that comes to my mind is my SubCA.
I have two CA Certyficates:
Certyficate #0 (expired)
Certyficate #1 <- valid.
I guess that all Windows before Windows 2012 R2 build certyficafion chain from valid (second #1) certyficate. Windows 2012 R2 take first and we have:
"A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
[ value] 800B0112 "
This is a bug or feature?
How I can fix this without removal Certificate #0 from my SubCA?
Best regards
Jacek Marek
MCSA Windows Server 2012Hi,
I run a certutil.exe -scinfo on both Windows 2012/2012R2 servers.
I found differences in the (~) same place in the output log.
On Windows 2012:
Exclude leaf cert:
b4 44 8f fb fb b4 5f 03 39 76 dc cc e8 da 02 e0 d0 cc b6 32
Full chain:
c8 3d 07 12 ea 4d 0e 5a 8c 50 fc 56 2e 51 f1 68 6a 26 90 77
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.5.5.7.3.2 Client Authentication
1.3.6.1.4.1.311.20.2.2 Smart Card Logon
On Windows 2012 R2:
Exclude leaf cert:
78 7e 6c 60 3f 20 c6 f6 e8 74 c8 36 e3 d3 88 ac 12 60 41 32
Full chain:
b8 a9 fa 6c db 07 cd 32 86 17 8c 88 02 ba d0 4b 8c ac 2d 58
Issuer: CN=XXX CA, OU=Certification Services, O=XX, C=XX
NotBefore: 2013-11-22 12:42
NotAfter: 2014-11-22 12:42
Subject: CN=XX Test, OU=XX, OU=UXX, DC=XX, DC=com
Serial: 7a0084f
SubjectAltName: Other Name:Principal Name=XX@XX
Template: Smartcard Logon Behalf 2048
1d 2a bb dc 2a 9c 70 0d b5 35 47 44 ee 61 60 ab 71 97 66 ff
A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider. 0x800b0112 (-2146762478)
I run a certutil -verify xx.cer on both Servers 2012/2012R2 and on both servers have the ~exact same thing.
Windows 2012:
Exclude leaf cert:
f6 0e 96 da c7 08 9a 78 12 97 a6 b6 22 df 57 9d e7 03 41 df
Full chain:
f0 fb 19 66 e8 6c 4f ea b4 d5 ea 6d 5e 38 54 07 b0 9f 52 96
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.4.1.311.20.2.2 Smart Card Logon
1.3.6.1.5.5.7.3.2 Client Authentication
Leaf certificate revocation check passed
Windows 2012 R2:
Exclude leaf cert:
84 18 5b 9d 06 61 60 73 c6 37 80 f4 25 33 c4 d3 5e ef 4a 93
Full chain:
63 8e 9e 37 78 c9 93 bb 4d da f4 e3 4b 7e 2b 14 49 28 0f 5d
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.4.1.311.20.2.2 Smart Card Logon
1.3.6.1.5.5.7.3.2 Client Authentication
Leaf certificate revocation check passed
Any idea, or I must open case with Microsoft support?
Best regards
Jacek Marek
MCSA Windows Server 2012 -
One of the specified disk images could not be opened
I cannot believe how instable my system is. I switched to Mac to get a reliable system, but I cannot do without Windows entirely, hence my heavy use of VPC.
Today I got the small grey screen "You need to restart your computer". I was running VPC at the time. All apps were closed except Windows Explorer (the file system). The cause was merely unplugging my broadband connection. Wow!
On rebooting VPC I got:
"One of the specified disk images could not be opened. The disk image file is not the correct file type or uses a file format that is unsupported by this version of Virtual PC."
I "detached" my "drives" 2+3, which were pointing to my Drive2.vhdp and Drive3.vhdp data "drives" and tried again. No luck.
Drive 1 was pointing to Disk1.vhdp, which is a part of my Windows 2000.vpc package. I don't believe that it was pointing there before the crash.
# side note #
(The Windows 2000.vpc package is an old installation that I don't use but have not deleted. I currently use one called: "Windows 2000 copy 1-011105") which might or might not be a copy of "Windows 2000.vpc." I've had so many problems, it's hard to say.
I then tried and successfully detached the Disk1.vhdp and received a warning:
"The hard drive data previously used by Drive 1 is no longer contained in this PC document. The data has been moved to a separate Virtual Hard Drive Document "Windows 2000 copy 1-011105 Disk1.vhdp".
On examining the above package I find:
BaseDrive.vhd 14.45GB (size about right) dated last night when I last closed VPC
MainPackageFile Alias
UndoDrive1.vud dated at the time of the problems.
On examining my "Windows 2000 copy 1-011105.vpc7 I find:
Configuration.plist
IconCache
MainPackageFile Alias
StartMenu.plist
Do you have a suggestion as to how I can rescue my above mentioned BaseDrive.vhd please? This is more recent than my last back-up.
Many thanks in advance.Problem solved.
-
I create a brand new plan based on a template.
A task in that plan has a team resource assigned. the task is fixed work. The PM may change the work and duration but not the team resource.
The plan is published.
I delegate my self as a team resource: and try add myself to team task in the timesheet area (using insert row). I can choose some tasks and the add. Most tasks throw this error. This happens if nothing on the plan is changed - it is brand new - minutes
old
One or more of the specified resources could not be re-assigned. This can happen if the proposed resource to be assigned has already an assignment on the given task or the specified assignment is deleted or rejected.
How can I stop the alert:
One or more of the specified resources could not be re-assigned. This can happen if the proposed resource to be assigned has already an assignment on the given task or the specified assignment is deleted or rejected.
Trying to stop the swap to Salesforce - but the errors keep a comingoooch - I can fix it - I need delete the task and recreate it. Which is amazingly tedious as I cannot see if a task needs recreating or not. There's 10 template plans and an average of 200 tasks - then I have to rename the template - the assign the
new template to the EPT - this will be a long night; with only complaints at the end.
Trying to stop the swap to Salesforce - but the errors keep a coming -
Hi all,
I need to create service to access all unread mails of other mailbox's every time in Exchange server 2013, for that i trying to use Delegate access.
but i am not succeed. I am getting Error Every time : [The specified object was not found in the store]
error shows in FolderId in
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
List<DelegateUser> newDelegates = new List<DelegateUser>();
DelegateUser emailDelegate = new DelegateUser("[email protected]");
emailDelegate.Permissions.InboxFolderPermissionLevel = DelegateFolderPermissionLevel.Editor;
newDelegates.Add(emailDelegate);
Mailbox mailbox = new Mailbox("[email protected]");
Collection<DelegateUserResponse> response = service.AddDelegates(mailbox, MeetingRequestsDeliveryScope.DelegatesAndSendInformationToMe, newDelegates); var userMailbox = new Mailbox(useremail);
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
var itemView = new ItemView(20);
var userItems = service.FindItems(folderId, itemView);
i changed my code in many ways by adding new Delegate User with different folder permissions.
but i am getting same Error, Please help me.That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
Cheers
Glen -
I have a library of nearly 2000 songs and all of which were purchased/downloaded in their entirety. It seems that after one of the iTunes updates… many (not all, but plenty) of those songs were “cut off” after playing about 2/3 through them… I haven’t gone through the entire library to see which are complete and which were cut off, but hoped this is “known problem” and hopefully with a known “fix”… Make sense?
Please advise…
Thx,
JohnnyI have a library of nearly 2000 songs and all of which were purchased/downloaded in their entirety. It seems that after one of the iTunes updates… many (not all, but plenty) of those songs were “cut off” after playing about 2/3 through them… I haven’t gone through the entire library to see which are complete and which were cut off, but hoped this is “known problem” and hopefully with a known “fix”… Make sense?
Please advise…
Thx,
Johnny -
I have two macs in my house. One is newer and came with the os x mountain lion software and the other one needs to be upgraded. I was wondering if there is a way to take upgrade from one to the other? Should not have to buy this software again.
Welcome to Apple Support Communities
Buy it for the other computer. Mountain Lion is preinstalled on the new Mac, but you can only use it in the new one
Maybe you are looking for
-
IDES for writing Java card applets and converting the applets as CAP FILE.
I have developed a JAVA CARD APPLET , FindMFValueJCA.java . It gets compiles in net beans 6.0 But while converting the applet to CAP file i am getting some errors. Is there any other IDES which take care of converting the CAP files
-
Hello there, im looking out for someone who could convert those old labview files from version 4.0 to 11. it would help a lot. Most ISM-demo.vi is most important for me. Greetings, deryoshi Attachments: ismbus_example_40.7z 1120 KB
-
ICal events being deleted when syncing with Palm Zire 21
I have been syncing my Palm Zire 21 with iCal successfully for over a year with few problems. A few weeks ago I noticed that almost, but not all of the events on both the Palm device and iCal more than three months old were gone. Then, a few weeks la
-
I made an additional page in iWeb that I have hidden, in other words in not listed in the main Welcome html. I can't seem to access it when I go to my website. It should come up even if I hide it. Could someone help me out. Thanks. Kurt
-
Ability to use u0093Globalu0094 queries, and modify/save them u0093Locallyu0094
Hi, I have one requirement of Creating Role with RRMX Tcode, to Ability to use Global queries, and modify/save them Locally for their own use. Ability to Create & Modify Local queries for their own use. I have tried with all combination but st