Submit statement help - URGENT!!

Hi..
pls help me with this..
requirement is like this..
I am calling a report from another one. Say the calling report is first and the called is second. I am calling using submit statement.
populated data in an internal table in second report.
Returned to the first report and called third report and filled an internal table and came back to first report.
Is there anyway that I can get those two ITABS at a time in the first report. Because i got to compare them.
Pls suggest .. Thanks a lot!@!

Hi,
Check this example..
*Send the internal table memory from the second report.
EXPORT ITAB2 TO MEMORY ID 'REPORT2'.
*Get the values from the second report.
IMPORT ITAB2 FROM MEMORY ID 'REPORT2'.
*Send the internal table memory from the third report.
EXPORT ITAB3 TO MEMORY ID 'REPORT3'.
*Get the values from the third report.
IMPORT ITAB3 FROM MEMORY ID 'REPORT3'.
Compare the internal table.
IF ITAB2[] = ITAB3[].
ENDIF.
Thanks,
Naren
Message was edited by: Narendran Muthukumaran

Similar Messages

Plz help in submit statement

Hi all
i have a transaction MD4C which shows some missing material numbers .
now i ill have to create a report which shows some selected part of data from MD4C.
means if md4c is showing 16 rows i ill have to show only 5 rows based on my selection criteria.
Please guide me how to do it .
wat i am thinking
can i use statement submit to execute that program and i want to
ask 1 thing
like in MD4C i have an internal table in which i have all the data
can i use submit statement to bring that internal table to my program .
plz guide me how to do it ..
Thanx in advance .

Hi,
first find and analyse the report program executing while executing the Tcode MD4C.
you can directly call that standard report program from your z-program using below statement.
Follow the below steps.
Call the below FM to prepare selection table
W_REPORTID = SY-REPID.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
    EXPORTING
      CURR_REPORT     = W_REPORTID
    TABLES
      SELECTION_TABLE = W_SEL_TAB.
Call the standard program
SUBMIT 'Standard program name' EXPORTING LIST TO MEMORY WITH SELECTION-TABLE W_SEL_TAB AND RETURN.
use the below function module to get the contents from memory
Use the function module to get the data from memory.
CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
      LISTOBJECT = I_LIST.
then use the below function module to convert the downloaded data
Use the function module to convert raw data to asci format
CALL FUNCTION 'LIST_TO_ASCI'
    TABLES
      LISTASCI           = I_INITIAL
      LISTOBJECT         = I_LIST
    EXCEPTIONS
      EMPTY_LIST         = 1
      LIST_INDEX_INVALID = 2
      OTHERS             = 3.
IF SY-SUBRC NE '0'.                                       "#EC *
    MESSAGE E056."Unable to convert data.
ENDIF.
now I_INITIAL will contains the standard report data; now you can analyse this internal table and you can do the coding towards your requirement.
Reward if useful.
Thanks,
Sreeram.

BAPI FM with Submit Statement

Hi,
I want to use BAPI Function Module and Submit Statement in a program. How i can use this, Please help me since this is very urgent.
Regards
Krishna

Hi Deepu,
try this code
REPORT report2.
DATA: text       TYPE c LENGTH 10,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab    "here you can use the 2 tables.
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
hope this solves your problem..
Thanks!

Dout in Submit statement in print program....

Hi all,
In my print program, after printing my forms i need to call another print program. For this im using SUBMIT statement.
I hope my print program goes to an update task. So when it encounters a function module or submit statement it coming out of the print program.
The same logic is working fine when i click 'PRINT PREVIEW' button in the shop papers list of IW32 Transaction. But the control comes out of the program when i go through the PRINT button in the IW32 transaction.
Im not sure whether the control is coming out cuz of any update task.
So please help on this. It's urgent.
Thanks,
karthik

SUBMIT always starts new LUW. Not sure if I understand the rest of your "doubt"... You might want to read a bit more on the LUW concept and also check the ABAP documentation on SUBMIT.
http://help.sap.com/saphelp_nw70/helpdata/en/41/7af4b9a79e11d1950f0000e82de14a/frameset.htm

Dout in Submit Statement....

Hi all,
In my print program, after printing my forms i need to call another print program. For this im using SUBMIT statement.
I hope my print program goes to an update task. So when it encounters a function module or submit statement its coming out of the print program.
The same logic is working fine when i click 'PRINT PREVIEW' button in the shop papers list of IW32 Transaction. But the control comes out of the program when i go through the PRINT button in the IW32 transaction.
Im not sure whether the control is coming out cuz of any update task.
So please help on this. It's urgent.
Thanks,
karthik

SUBMIT always starts new LUW. Not sure if I understand the rest of your "doubt"... You might want to read a bit more on the LUW concept and also check the ABAP documentation on SUBMIT.
http://help.sap.com/saphelp_nw70/helpdata/en/41/7af4b9a79e11d1950f0000e82de14a/frameset.htm

How to skip the alv list when submit a report by SUBMIT statement?

Dear Experts,
I have to submit a report(RMVKON00) for a special request in my add-on program, I use the following statment:
SUBMIT RMVKON00
AND RETURN EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    LISTOBJECT = ABAPLIST_TAB
EXCEPTIONS
    NOT_FOUND = 1
    OTHERS     = 2.
CALL FUNCTION 'LIST_TO_ASCI'
* EXPORTING
*   LIST_INDEX               = -1
*   WITH_LINE_BREAK          = ' '
TABLES
    LISTASCI                 = LISTASCI_TAB[]
   LISTOBJECT                = ABAPLIST_TAB
EXCEPTIONS
   EMPTY_LIST               = 1
   LIST_INDEX_INVALID       = 2
   OTHERS                   = 3
But it still display the alv list , and I must click button 'BACK' ,then it return my add on program.
I hope to skip the alv list (does not display the alv list ) .
Would you like to help me?
Thanks and Best Regards,
Colin.
Edited by: Colin on Jan 8, 2010 10:09 AM

Hi Colin,
I dont think you would be able to skip the ALV output using SUBMIT. However try changing the value of sy-lsind after the submit statement.
SUBMIT RMVKON00
AND RETURN EXPORTING LIST TO MEMORY.
sy-lsind = sy-lsind - 1.
If that doesnt work then try using JOB_START JOB_SUBMIT, JOB_CLOSE...
Thanks,
Best regards,
Prashant

Submit statement in ABAP program

Hi All,
I am using two submit statements in my program for two different reports. When i run the program i get the output screens of the two reports at the ouptut. Is there any way i can hide the user seeing the output screens of the two programs and display only the output screen of my program. If you have any clues please post it.
Thanks & Regards,
Rahul Rathi

You can call executable programs from other ABAP programs using the following statement:
SUBMIT <rep>|(<field>) [AND RETURN] [<options>].
You can either specify the name of the program you want to call statically by entering the program name in the code of the calling program, or dynamically by specifying the name of a field (in parentheses) containing the name of the program. If the system cannot find the specified executable program when trying to execute the SUBMIT statement, a runtime error occurs.
If you omit the AND RETURN addition, all data and list levels of the calling program (the entire internal session) are deleted. After the called executable program has finished, control returns to the level from which you started the calling program.
If you use AND RETURN, the system stores the data of the calling executable program and returns to the calling after processing the called program. The system resumes executing the calling program at the statement following the call.
The SUBMIT statement has a set of additions <options> for passing data to the called program and specifying various other processing options. Some of them are described in the following sections:
Have a look at below link. It will help you.
http://www.sapdevelopment.co.uk/reporting/rep_submit.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9dd035c111d1829f0000e829fbfe/content.htm
Best Regards,
Vibha
*Please mark all the helpful answers

How to pass radiobuttons using a submit statements.

Hi All,
Can anyone tell me how to pass radiobuttons using Submit statement.
My problem is that I am able to pass one select option and one parameter using the statement:
submit (v_repid) to sap-spool without spool dynpro
                   spool parameters s_print_parms
                   using selection-screen '1000' WITH SELECTION-TABLE t_rspar_tab
                   and return.
This selection screens got to check selections based on 2 radio buttons available in the selection screen which also i need to pass through SUBMIT.Please let me know how do i pass this to the Submit statement.
Thankx in advance...
Helpful answers will be rewarded fully...

Hi Susanth,
               Create Variant for the calling program, Give that variant( here in the below program variant for calling program that I created is VAR1) in the calling program in SUBMIT Statement.
<b>
CALLING PROGRAM:
</b>
data:
w_variant(5) TYPE c VALUE 'VAR1'.
SUBMIT YH625_CALLED_PROGRAM USING SELECTION-SET w_variant.
<b>CALLING PROGRAM:</b>
TABLES spfli.
parameters:
      w_radio1 RADIOBUTTON GROUP g1,
      w_radio2 RADIOBUTTON GROUP g1.
SELECT-OPTIONS s_table FOR spfli-carrid.
WRITE '*************** This is Called program output **********************'.
Hope this solves your problem.
If you any query you are welcome.
Regards,
V.Raghavender.

Using a layout in SUBMIT statement

Hi,
I am calling a program from another program using a SUBMIT statement. I'm also using a layout to do so.
SUBMIT rffmepgax
         WITH s_fonds = s_fund-low
         WITH s_fictr = s_fc-low
         WITH s_hkont = c_gl
         WITH p_per_fr = s_poper-low
         WITH p_per_to = s_poper-high
         WITH p_fyr_fr = s_year-low
         WITH p_fyr_to = s_year-low
         WITH s_fipex = c_citem
>>>         WITH p_disvar = '/ZTRAVEL'
         WITH p_maxsel = c_max
         WITH s_wrttp = c_vt1
         WITH s_wrttp = c_vt2
         WITH FREE SELECTIONS texpr
         AND RETURN
         EXPORTING LIST TO MEMORY.
The problem is that /ZTRAVEL is a public layout that anyone can change. I can rewrite the code to use a user-specific layout, but then only I can run the program. If anyone else tries, it stops and says the layout doesn't exist.
Is it possible to create a public layout that cannot be changed by anyone? What is the t-code for this?
thanks,
Kevin

Hi
USING SELECTION-SET <var>
This addition tells the system to start the called program with the variant var
You specify the variant in the quotes.
Check the below links
http://help.sap.com/saphelp_nw04s/helpdata/en/9f/dba51a35c111d1829f0000e829fbfe/frameset.htm
regarding calling another program from current report
Hope this helps
Regards
Shilpa

Avoid ALV output screen in submit statement

hello,
I have created one FM.in that FM i am calling one zreport using submit statement as i want to access that zreport's internal table.so i have done that using IMPORT and EXPORT statement and i am getting values in my FM.
but my problem is when i execute that FM it stops and display the ALV output of zreport and then when i press back button it gives me FM's output.i dont want that ALV output.can anybody help me that how to omit this output screen?
regards
soniya s.

Hi,
Use option EXPORTING LIST TO MEMORY with statement SUBMIT.
Regards,
Nikhil
Edited by: Nikhil Kayal on May 13, 2009 1:32 PM

SUBMIT statement using variant

Hi Gurus,
i am trying to use execute a variant , and that variant has to be submitted in memory.(i.e i have three variants A,B,C whenever i run the report using variant A then that fields only has to be passed to memory) , but instead of that , even if i am using varinat B , but by defaul it is taking another variant which contains all the fields.I think my issue is clear.i am using this submit statement.
SUBMIT (sy-repid)
         AND RETURN
         EXPORTING LIST TO MEMORY
         WITH SELECTION-TABLE i_selscr.
pleasehelp me regarding this ASAP.
Thanks and regards,
Rajeshwar

Hi Rajeshwar
You can submit it by using variant name also:
Submit <Report> USING SELECTION-SET variant .
Check this link:
http://sapdevelopment.co.uk/reporting/rep_submit.htm
http://help.sap.com/abapdocu/en/ABAPSUBMIT_SELSCREEN_PARAMETERS.htm
http://help.sap.com/abapdocu/en/ABAPSUBMIT_SELSCREEN_PARAMETERS.htm
Need information about SUBMIT statement
Regards
Neha
Edited by: Neha Shukla on Nov 30, 2008 12:46 PM
Edited by: Neha Shukla on Nov 30, 2008 3:22 PM

SUBMIT statement doesnt work

hi
I want to execute program RIMODGEN ( CFM1 transaction ) with some values filled in MA_MATNR
But this program is not able to execute the program with SUBMIT statement and return & close the job, please tell me whats the problem with this....
Points for all helpful answers
* Job open
call function 'JOB_OPEN'
       exporting
            delanfrep        = ' '
            jobgroup         = ' '
            jobname          = jobname
            sdlstrtdt        = sy-datum
            sdlstrttm        = sy-uzeit
       importing
            jobcount         = jobcount
       exceptions
            cant_create_job = 01
            invalid_job_data = 02
            jobname_missing = 03.
if sy-subrc ne 0.
                                       "error processing
endif.
* Insert process into job
* CALL TRANSACTION
SUBMIT cfm1 with MA_MATNR in MA_MATNR
                  WITH I_MODID = 'TEST_RAJ'
                  WITH I_LOGSYS = 'D41030'
                  with I_APPL   = 'TEST_RAJ'
                  user sy-uname
                  via job jobname
                  number jobcount
                  and RETURN.
if sy-subrc > 0.
      message e200(zz) with 'RIMODGEN call failed'. "error processing
endif.
* Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
       exporting
            event_id             = starttime-eventid
            event_param          = starttime-eventparm
            event_periodic       = starttime-periodic
            jobcount             = jobcount
            jobname              = jobname
            laststrtdt           = starttime-laststrtdt
            laststrttm           = starttime-laststrttm
            prddays              = 1
            prdhours             = 0
            prdmins              = 0
            prdmonths            = 0
            prdweeks             = 0
            sdlstrtdt            = starttime-sdlstrtdt
            sdlstrttm            = starttime-sdlstrttm
            strtimmed            = starttimeimmediate
            targetsystem         = host
       exceptions
            cant_start_immediate = 01
            invalid_startdate    = 02
            jobname_missing      = 03
            job_close_failed     = 04
            job_nosteps          = 05
            job_notex            = 06
            lock_failed          = 07
            others               = 99.
if sy-subrc eq 0.
     MESSAGE i200(zz) with 'Done !!'.    "error processing
     stop.
endif.

Rob and I were pointing out that you have the transaction name in the SUBMIT statement in your code that you posted above, so if you are not currently using the program name in your program, make sure that you are. Also, you may want to use the extension "     to sap-spool without spool dynpro" of the SUBMIT statement, the ouput will then go to the spool. Here is an example program where I am creating a background job .
report zrich_0004 .
data:   sdate type sy-datum,
        stime type sy-uzeit,
        l_valid,
        ls_params like pri_params,
        l_jobcount like tbtcjob-jobcount,
        l_jobname like tbtcjob-jobname.
start-of-selection.
* Get Print Parameters
call function 'GET_PRINT_PARAMETERS'
       exporting
            no_dialog      = 'X'
       importing
            valid          = l_valid
            out_parameters = ls_params.
* Open Job
l_jobname = 'ZRICH_0005'.
call function 'JOB_OPEN'
       exporting
            jobname = l_jobname
       importing
            jobcount = l_jobcount.
* Submit report to job
submit zrich_0005
       via job     l_jobname
           number l_jobcount
       to sap-spool without spool dynpro
           spool parameters ls_params
              and return.
* Kick job off 30 seconds from now.
sdate = sy-datum.
stime = sy-uzeit + 30.
* Schedule and close job.
call function 'JOB_CLOSE'
       exporting
            jobcount = l_jobcount
            jobname   = l_jobname
            sdlstrtdt = sdate
            sdlstrttm = stime
*            strtimmed = 'X'
Regards,
Rich Heilman         .

Submit statement without executing AT SELECTION SCREEN event

hi,
In my report since the input data is very large iam spliiting the input data batch by batch. Iam executing the report for the first batch input data and retriving the results for it.
Then to find the result for the enxt batch input data , iam using submit statement to execute the report again. While executing the report now it should directly start from the start-of-selection event only. It should not go for At selection screen or initialization events.
Can anyone help me how to execute the report for second time from start-of-selection event.
Regards,
Phyrose.

Is code written directly under START-OF-SELECTION or you are calling subroutine in START-OF-SELECTION?
I would suggest you to call the subroutines written under START-OF-SELECTION.
PERFORM form IN PROGRAM prog.

Dead bb curve 8520 SOS need help urgently

hi guys
I am experiencing several major issues
1) my phone had been resetting itself a lot lately without reason and randomly. I then downgraded the OS from 5 to 4 then it continued to do the same so I did the removal of the vendor.xml file in the folder of my win 64 bit computer then the blackberry desktop manager, the BBSAK and the computer cannot find my phone. All it does is flash the LED several times in red and wont even restart or show some evidence of life. I have tried everything please help urgently!!!!!

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
Otherwise, please try this drastic method:
KB27956 How to recover a BlackBerry smartphone from any state
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Use call transaction or submit statement

Hi, i have a complex transaction, it has two control programs, a Z program and a standard program. I need execute it by call transaction or submit statement. In this transaction there are some select-options that i want fill with specific values.
Can you help me with it?

Hi Robin, the SHDB transaction was very useful. Now i have other problem. This transaction execute a jobs set.I already have filled all of fields in the transaction, i saved the parameters for the execution by SAVE button (BDC_OKCODE=SAVE), but the transaction don't release the jobs and must do it. The last action (to release the jobs set) is executed by the OK button(BDC_OKCODE=OK).
This is the code that i'm implementing:
REPORT ZPRUEBA_SALDOS_ANTERIORES     .
DATA: BDCDATA TYPE TABLE OF BDCDATA.
DATA: ITAB TYPE TABLE OF BDCMSGCOLL.
DATA: WA_ITAB TYPE BDCMSGCOLL.
DATA: PROGRAM LIKE SY-REPID ,
      WA_BDCDATA TYPE BDCDATA.
DATA: DATE_ID(10).
DATA: DATE_CONV(11).
DATA: T_ID(6).
DATA: DES_ERROR(500).
*"parametro zdo(para tipo de documentos)
*RANGES: R_BLART FOR DFKKOP-BLART,
*        R_VKONT FOR FKKVKP-VKONT.
*INITIALIZATION.
START-OF-SELECTION.
CALL FUNCTION 'CONVERSION_EXIT_SDATE_OUTPUT'
       EXPORTING
            INPUT = SY-DATUM
       IMPORTING
            OUTPUT = DATE_CONV.
DATE_ID = SY-DATUM.
CONCATENATE DATE_ID+6(2) '.' DATE_ID+4(2) '.' DATE_ID+0(4) INTO DATE_ID.
CONCATENATE DATE_CONV+3(3) '_' DATE_CONV+0(2) INTO T_ID.
WA_BDCDATA-PROGRAM = 'SAPLFKKAKTIV2'.
WA_BDCDATA-DYNPRO = '1000'.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO BDCDATA.
CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = 'FKKAKTIV2_DYNP_1000-LAUFD'.
WA_BDCDATA-FVAL = '11.06.2008'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'FKKAKTIV2_DYNP_1000-LAUFI'.
WA_BDCDATA-FVAL = 'MAR_38'.
APPEND WA_BDCDATA TO BDCDATA.
CLEAR WA_BDCDATA.
* WA_BDCDATA-PROGRAM = 'SAPLZ_CL_PROCESOS_EN_MASA'.
WA_BDCDATA-PROGRAM = 'SAPLFKKAKTIV2'.
* WA_BDCDATA-DYNPRO = '1001'.
WA_BDCDATA-DYNPRO = '1000'.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'P_STICHT'.
WA_BDCDATA-FVAL = DATE_ID.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'S_BUKRS-LOW'.
WA_BDCDATA-FVAL = 'PCS'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'S_VKONT-LOW'.
WA_BDCDATA-FVAL = '0'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'S_VKONT-HIGH'.
WA_BDCDATA-FVAL = '999999999999'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'BDC_OKCODE'.
WA_BDCDATA-FVAL = '=%01410010001580545'.
APPEND WA_BDCDATA TO BDCDATA.
CLEAR WA_BDCDATA.
WA_BDCDATA-PROGRAM = 'SAPLALDB'.
WA_BDCDATA-DYNPRO = '3000'.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO BDCDATA.
* CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = 'RSCSEL-SLOW_I(01)'.
WA_BDCDATA-FVAL = 'BS'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'RSCSEL-SLOW_I(02)'.
WA_BDCDATA-FVAL = 'FS'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'RSCSEL-SLOW_I(03)'.
WA_BDCDATA-FVAL = 'CD'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'RSCSEL-SLOW_I(04)'.
WA_BDCDATA-FVAL = 'EF'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'RSCSEL-SLOW_I(05)'.
WA_BDCDATA-FVAL = 'TR'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'RSCSEL-SLOW_I(06)'.
WA_BDCDATA-FVAL = 'TF'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'RSCSEL-SLOW_I(07)'.
WA_BDCDATA-FVAL = 'TC'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'RSCSEL-SLOW_I(08)'.
WA_BDCDATA-FVAL = 'LP'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'RSCSEL-SLOW_I(09)'.
WA_BDCDATA-FVAL = 'NC'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'BDC_OKCODE'.
WA_BDCDATA-FVAL = '=ACPT'.
APPEND WA_BDCDATA TO BDCDATA.
CLEAR WA_BDCDATA.
* WA_BDCDATA-PROGRAM = 'SAPLZ_CL_PROCESOS_EN_MASA'.
WA_BDCDATA-PROGRAM = 'SAPLFKKAKTIV2'.
* WA_BDCDATA-DYNPRO = '1001'.
WA_BDCDATA-DYNPRO = '1000'.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO BDCDATA.
CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = 'BDC_OKCODE'.
WA_BDCDATA-FVAL = '=TAB03'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'BDC_OKCODE'.
WA_BDCDATA-FVAL = '=PRPRN'.
APPEND WA_BDCDATA TO BDCDATA.
CLEAR WA_BDCDATA.
WA_BDCDATA-PROGRAM = 'SAPLSPRI'.
WA_BDCDATA-DYNPRO = '0100'.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO BDCDATA.
CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = 'PRI_PARAMS-PDEST'.
WA_BDCDATA-FVAL = 'LOCAL'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'PRI_PARAMS-PLIST'.
WA_BDCDATA-FVAL = '1604_SA_16'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'BDC_OKCODE'.
WA_BDCDATA-FVAL = '=SAVE'.
APPEND WA_BDCDATA TO BDCDATA.
CLEAR WA_BDCDATA.
WA_BDCDATA-PROGRAM = 'SAPLFKKAKTIV2'.
WA_BDCDATA-DYNPRO = '1000'.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO BDCDATA.
* CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = 'BDC_OKCODE'.
WA_BDCDATA-FVAL = '=TAB04'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'FKKAKTIV2_DYNP_1190-VARI'.
WA_BDCDATA-FVAL = 'INTERES'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'FKKAKTIV2_DYNP_1200-JOBS_LOAD_BALA'.
WA_BDCDATA-FVAL = '6'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'BDC_OKCODE'.
WA_BDCDATA-FVAL = '=SAVE'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'BDC_OKCODE'.
WA_BDCDATA-FVAL = '=DISP'.
APPEND WA_BDCDATA TO BDCDATA.
CLEAR WA_BDCDATA.
WA_BDCDATA-PROGRAM = 'SAPLFKJO_JOB'.
WA_BDCDATA-DYNPRO = '0100'.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO BDCDATA.
CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = 'D100_FIELDS-XBACKGR'.
WA_BDCDATA-FVAL = 'X'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'D100_FIELDS-XIMMEDIATE'.
WA_BDCDATA-FVAL = 'X'.
APPEND WA_BDCDATA TO BDCDATA.
WA_BDCDATA-FNAM = 'BDC_OKCODE'.
WA_BDCDATA-FVAL = '=OK'.
APPEND WA_BDCDATA TO BDCDATA.
CALL TRANSACTION 'ZPSA' USING BDCDATA MODE 'A'
                           MESSAGES INTO ITAB.
Edited by: Marcel ochoa on Jun 12, 2008 5:01 PM
Edited by: Marcel ochoa on Jun 12, 2008 5:03 PM
Edited by: Marcel ochoa on Jun 12, 2008 5:06 PM
Edited by: Marcel ochoa on Jun 12, 2008 10:43 PM
Edited by: Marcel ochoa on Jun 12, 2008 10:45 PM
Edited by: Marcel ochoa on Jun 12, 2008 11:37 PM

Submit statement help - URGENT!!

Similar Messages

Maybe you are looking for