Submitted responses landing in wrong columns

Once a form is filled out and submitted the answers are coming in to the spreadsheet in random order? How do I make them in order of the actual form? For instance, form says: Name, Address, City... The answers are coming in Address, Name, City. How do I make them be submitted in order: Name, Address, City.

Hi,
You can reorder the columns in the response table by selecting them then click/drag using the gray area above the column name, as shown below.
Regards,
Brian

Similar Messages

  • How do I create a header in the response table for a column I want to use that is not on the form it

    Example: My form has 10 fillable questions.  The Response table uses 10 columns to show the answers to those questions.  I would like to use 3 more columns to record internal information.  How do I insert the header titles?

    Hi,
    You can go to Responses view tab, focus on your last column header and then click menu Table->Add Column After. Or you click + button at the end of table - refer below image.
    I am not clear your question "How do I insert the header titles?" Do you mean you want to use your form title as data value in each cell in the column? If yes, you can set formula in the column following below steps.
    1. Click +Add a Row button
    2. Focus on the cell on column L (I assume you want to set your formular on this column).
    3. Input ="your form title" into the cell
    Then after you received a submission, the form title would display in the related cell in each row.
    Hope it will help you.
    Thanks,
    Ying

  • Managed Metadata appearing in wrong columns after Restoring a site to a new Site Collection

    I've restored a site with some libraries that have Managed Metadata (MM) columns from one site collection into another site collection inside the same web app so it should all subscribe to the same Managed Metadata
    Service Application.
    There are two MM columns in one library, one holds a single value which is what type of document it is, the other is a general tag field that allows the user to add multiple MM values to it if they want.
    What we've found  is that data has randomly disappeared on some MM fields, on others it appears in the wrong column, and in other cases it appears fine.
    I used native out of the box GUI backup and restored with the command line,
    I've done it twice with the same result, so it’s not a one off corruption during backup. It's the same story in a different doc library based on different term sets as well. 
    Of all the things to not work properly, MM was probably last on my list to expect, it's knocked my confidence in it a bit, as well as worried me about future upgrades.
    If anyone has any ideas over what may be the cause of this, it would be appreciated, I've read lots of blogs, but nothing quite like this has cropped up.
    Thanks,
    Jon

    Most of the ISV offerings will allow you to 'Migrate' content from one SP location to another. I'm pretty sure AvePoint and a few others have tools specifically developed for shifting bits and pieces around SharePoint farms.
    It is a limitation but the ISV tools tend to do a good job and maintain nearly full consistency.
    There's scripts around that can do much/most of the migration and you could always extend them to do the same things as the ISV migration tools however the cost to do so can quickly get to the same ballpark as buying an already made tool.
    Paul is also in the London office, we often work together when projects requiring his brains and my beauty crop up.

  • Delete command in SQLPLUS by use wrong column name command

    Assume I have three table T1,T2 and T3 shown as follow...
    sql> desc T1 ;
    cusid number
    name varchar2(50)
    sql> select * from T1;
    cusid name
    1) 101 TEST1
    2) 102 TEST2
    3) 103 TEST3
    4) 104 TEST4
    sql>desc T2;
    ref_cusid number
    sql>select * from T2
    cusid
    1) 103
    if I want to delete account in T1 that deleted account is in T2.
    I must use query1 , it will work
    query1::>
    delete from T1 where cusid in (select ref_cusid from T2);
    but if i type wrong by this command
    query2::>
    delete from T1 where cusid in (select cusid from T2);
    in query 2,it should be have warning message because field cusid is not in T2.Right ? But it will delete all account in table T1.
    compare query2 with query 3,
    query3::>
    delete from T1 where cusid in (select field_test from T2);
    it will show warning message like 'ORA-00904: "FIELD_TEST": invalid identifier'
    I noticed that in query2 and query3 , Different Thing is query 2 wrong column name in T2 has same name as column in T1. I wonder why it is.

    I doubt very much if this is really what you did:
    sql>desc T2;
    ref_cusid number
    sql>select * from T2
    cusid
    1) 103The desc command shows a column name ref_cusid. The select command shows a column title cusid, not ref_cusid.
    You start by saying that you have 3 tables, without doing anything with T3. Are you sure you you haven't mixed up a copy and paste somewhere?

  • How can I view submitted responses in their entirety?

    How can I view submitted responses to FormsCentral in their entirety?  The forms were created in Word, made fillable in Acrobat XI, and made submittable in  FormsCentral Plus via our company's website.  I'd like to receive the completed form in its original format rather than sorted by question.  Is this possible?

    For imported PDF files, you currently can not save a response into the original PDF. We will be adding this capability at the end of January (in a few weeks).
    Sorry to have to make you wait.
    Randy

  • Can I send submitted responses to my database server?

    I want to send the user submitted response to my database. Do you have any api from where I can capture data and save it to my system?

    Hi;
    There are no API's available, you would have to manually export to Excel or CSV and then import that into another system. 
    We do have a "Feature Request" form where you can vote on popular existing ideas or add a new one of your own:
    https://adobeformscentral.com/?f=XnF-KJVCovcEVQz9tZHYPQ
    Thanks,
    Josh

  • Wrong column-headline in se16n after adjustment in view (se11)

    Hi together,
    When I´ve just created a view in trx. se11 I made little typo when I entered the name of a view field.
    Although I´ve adjusted this error, se16n still shows the wrong column headline.
    I´ve already deleted the view and created it again...nothing changes. In se16 erverything is OK.
    Thanks for any help

    Hi,
    This might be because of buffering issue. There is a standard program for deleting the ALV buffers. Don't remember the name. You can search in SCN for this.
    Try to logoff and relogin. Ideally it should work.
    Also you can debug SE16N and see from where the field cat is coming. I think it uses buffering parameters.
    Thanks,
    Vinod.

  • Responses going into wrong form

    I created a form, and then copied it and renamed it.  The original form is for vendors to view and play with, for a proposal process.  The 2nd form is for people to actually respond to.  I advertsie the 2nd form on a website, and all the links are correct. However, I am getting responses from the 2nd form dumped into the first form. I don't want to close the first form, because i want it to be viewed by vendors submitting proposals. I have done this with several other forms and I'm concernd this will continue to happen. Both forms have distinct URLs, so I'm not sure why this is happening.
    Help!!!

    Thanks.
    This is the first form, that is more of a test form, and responses are coming into here that shouldn't be coming - responses 1 through 3 should be in the 2nd form, the 4th response is a test response:  https://adobeformscentral.com/?f=A0RbyH00%2AMzZbcG5l1gfsA
    This is the 2nd form that responses should be coming into: https://adobeformscentral.com/?f=6qiuxTHSQSDl-tFtiVRbpA
    And I added you as coauthor.
    Thanks, Michelle
    The information in this e-mail and any attachments are for the sole use of the intended recipient and may contain privileged and confidential information. If you are not the intended recipient, any use, disclosure, copying or distribution of this message or attachment is strictly prohibited. If you believe that you have received this e-mail in error, please contact the sender immediately and delete the e-mail and all of its attachments.

  • Error when submitting responses

    Some respondents receive an error when submitting survey results.  Could there be a timing issue with the server if many responses are coming in at the same time?  Or could the error be caused at the senders location?

    we are trying to catch it.  It flashes quickly before results are submitted (via iPad) and communication is ended.  It may be a timing issue.  Let me look into this further.  Could be the user too!!!!!!!!!!!!!!!!!!
    Donna Dowdle
    IT Manager
    Dr. Scholl Foundation
    (847) 559-7430 - office
    (847) 602-0709 - cell
    DISCLAIMER!  The information contained in this e-mail message is confidential and is intended only for the use of the individual or entity to whom it is addressed.  If the reader of this message is not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or the taking of any action in reliance on the contents of this communication is strictly prohibited.  If you have received this e-mail message in error, please contact the sender at (847) 559-7430 and delete this e-mail message.

  • Why isn't the Submit button submitting responses?

    I created an evaluation form using Forms Central and distributed it. 4/5 respondents filled it out with no problems. The last person filled it out twice and lost her responses once through an error on her end and the second time she doesn't know why her answers weren't submitted properly. Any ideas why this might not have worked?

    Do you have Siri enabled and Siri in restrictions set to ON

  • Wrong column entries

    Hi,
    I´ve a table where one column(status) includes wrong values. Stuff like this:
    NC€CESSED
    ’@CESSED
    jã€CESSED
    thats all the same: PROCESSED! No other table or column is concerned.
    Our driver (9.0.2.0.0) shows all data correct, if we are using the right statement, so we have no problems in production.
    The right statement includes an select on all possible column values
    Example:
    select ... from confirmation where reserved = ... and status in('CREATED','PROCESSING FAILED','PROCESSED', 'PROCESSING')
    Next one is´nt usable because cryptic data for column status would be returned:
    select ... from confirmation where reserved = ...
    What is the problem with this column?
    THX for help. Marcus

    Hi,
    You can check;  Number of incorrect logons for a user after which the logon procedure will terminate  using this parameter.
    in rz11 ,
    login/fails_to_session_end
    These parameters may help you.
    http://help.sap.com/crmcg_en/22/41c43ac23cef2fe10000000a114084/content.htm
    My question is there any way we can look the user account wrong password entries and how many times they entered the wrong password.
    I don't think this is possible - to cheek , how many times the user entered the wrong password.
    Even if possible , those types of messages should appear in the system log - sm21
    Regards

  • VLD-1005 Wrong Column Lengts - Pointless warning

    If I have an attribute that's Number(4) and I want to use it as a source for a NUMBER column (no length or precision specified) then OWB gives me VLD-1005. Isn't this totally wrong? I can't think of a scenario where it would cause a problem. Can someone else come up with a good scenario?
    Proposal for the developers: treat 0 length for number fields as NULL so conditions like 0<4 that would fire above will become NULL<4 and the users won't get a useless warning.

    Hi
    You can use the Preference to suppress such warnings, don't think it has the greatest name - some thing like 'Suppress Validation Warning VLD-1004' which is misleading but is related to VLD1004/1005/1006 all around data type checking.
    You will find the option in OWB's preferences under the Generation/Validation section.
    Cheers
    David

  • Responsive Landing Page w/Form in WISIWYG Editor

    Hey There,
    Does anyone have any advice in terms of making a landing page with a form responsive in the WISIWYG editor? I've programmed regular landing pages that use media queries but not sure how those associate with the editor in Eloqua.
    Thanks!

    I am having a similar issue. I am experiencing the issue with the upload wizard when uploading a zip file of the landing page html and assets. Below is the link to what the landing page should look like, however, after going through the upload wizard process, I get this page (banking.bancofcal.com/CL) which you can see I am somehow missing the header and main graphic. Everything else loads properly.
    www.csfinancial.com/BOC/BHL-Correspondent
    Another time, I received the below error message when trying to finalize the upload. Any help is very much appreciated as I have been spending most of today trying to figure out the problem. Thank you.
    Details:
    Error Specifics: Server Exception
    Navigator: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.10; rv:35.0) Gecko/20100101 Firefox/35.0
    Username: Kevin.Salas
    Site Id: 1305297046
    Build Number: a8e6e8bb6f586fadf783dd397edb09b87c567af5
    Time Sent: 03/01/2015 15:43
    Time Logged-in: 03/01/2015 15:06
    Error Id: 21:1425251214047-1001
    Failing Request: PUT /API/REST/2.0/assets/landingPage/57?
    Message: InternalServerError
    Server Error ID: 797281643
    HTTP Code: 500
    Recent States:
    default:landingPageOverview,
    default:landingPages,
    default:importedFilesListState,
    default:importedFiles,
    Recent Actions:
    saveDeleteReady:proposeNewLandingPageViaUpload,
    noDock:showAppDock,
    landingPageOverview:enterState,
    landingPages:enterState,
    Kevin

  • My online form that I created has disappeared along with all of its submitted responses?

    We created a form for my work and set it up online for responses. I have been accessing it off and on now for a couple weeks. Now all of a sudden it has just disappeared!?!@? Any thoughts on why or how?
    Thanks,
    Jenn

    We had a service outage for parts of Wednesday and most of Thursday.  Could you please try to access your form again?  I was able to look up your account and it shows that the form is there (Professional Development Consultant Bio) and that you have 20+ people that have submitted data.  Is this the correct form?  Are you using account [email protected]?
    Jeff Canepa
    Software Quality Engineer
    Adobe Systems, Inc.
    [email protected]

  • WLC 5508 Flexconnect dhcp request landing on wrong vlan/dhcp pool

    Hi,
    We've recently setup our 5508 to work with Flexconnect. The 5508's run on 8.0.100, they are setup redundant. On the remote site we've setup a local dhcp pool for the various WLAN's/VLAN's. The AP's have registered with the WLC succesfully.
    We then setup the flexconnect groups, added the ap's and configured 1 vlan mapping to it's corresponding wlan id. Alsio setup the wlan, made it so it's using flexconnect, bound it to the interface which will allow it to reach the local dhcp machine.
    User can see the SSID, can login using the password, but they are awarded an ip addres from a different dhcp pool, meant for antoher vlan than the bonding in the flexconnect group is indicating.
    When I check the local dhcp pool for bindings on the mac address of a machine I can see multiple bindings. At 1 point I had 3 bindings in different pools, 1 on the native vlan for the AP, 1 on the vlan it should have and 1 on another vlan which wasn't configured anywhere in the flexconnect setup.
    Does anybody have a clue how and why this is happening?

    Just to add to Salma... All your AP's in FlexConnect are most likely connected to a trunk port. Make sure the native Vlan is defined and the vlan's are allowed on the trunk port. Then you need to verify that the AP's native Vlan and WLAN to Vlan mappings are correct. Seems like you might have some AP's that are not defined properly and that's why users that connect to a WLAN is getting in the wrong subnet. 
    Scott

Maybe you are looking for