SubReport Data not Exported to Excel Crystal Version10

Hi,
I have a main report and subreport in page header which displays Company Name ,
When I export the report data to excel only the main report data is exported no subreport data is exported.
Please can anyone let me know if this is a bug ... or am I missing out anything.
I am using crystl reports version 10
Cheers
Rahul

Hi Rahul
As the subreport is placed in the page header, it will not export the data of the subreport to MS Excel Data only. This is an export limitation.
In order to display the data of the subreport you can either use MS Excel (not Data only) or place the subreport in other sections of the main report.
Thanks
Poonam Thorat

Similar Messages

Data in table does not export to Excel

Why the invoke node Export Data to Excel produces empty Excel sheet with no data?
If I manually highlight the table control on the Front Panel, then run the VI again, data get exported. How does one highlight data in the table automatically?
Solved!
Go to Solution.

murchak,
I think this is happening to you because of the LV data-flow paradigm. If your screen shot is all that is on your block diagram, then the Invoke Node actually executes first, when there isn't any data in the table. Then, the "Table Control" 2D array is populated after an empty table has been exported. When you run the VI again, the data from the first run is already populated within the table, and thus the it *appears* to working. In actuality, it was working correctly the whole time, but the first time there was just no data to export because it executed first.
You must use data flow (wires, essentially) to ensure that the data is written to the table first before the data is exported to Excel second. A flat sequence structure or error wires (preferred) can help:
Hope this helps,

Page headers are not exported to excel files - Is there a workaround?

I use 2008, SP3.
I am experiencing a problem with exporting to Excel(.xls): the page headers, but the very first, are not exported.
The report page headers consist of weekdays and the corresponding dates, meanning they are different on each page.
The report looks OK in pdf and doc formats.
Is this a known problem or limitation?
Is there is a way to controll the export to Excel to correct this problem?
Thanks and ragards
Israel M Brill, Analyst

hi,
Are you exporting from Crystal Report Designer or InfoView?
If you are exporting from CR Designer, follow the below steps.
- Click Export button
- Microsoft Excel (97-2003) , OK
- 'Excel Format Options' dialog box appears
- Export Page Headers and Page Footers -> On Each Page, OK
Regards,
Vamsee

Page headers are not exported to excel files - can this be fixed in 2008SP3

I use 2008, SP3.
I am experiencing a problem with exporting to Excel(.xls): the page headers, but the very first, are not exported.
The report page headers consist of weekdays and the corresponding dates, meanning they are different on each page.
The report looks OK in pdf and doc formats.
Is this a known problem or limitation?
Is there is a way to controll the export to Excel to correct this problem?
Thanks and ragards
Israel M Brill, Analyst

Note that this is the .NET - SAP Crystal Reports forum;
Is this an issue in a .NET app?
Does the report export as expected from the CR 2008 designer? If not, close this thread and post a new one in the [SAP Crystal Reports Design|SAP Crystal Reports, version for Visual Studio; forum.
What version of .NET?
Web or Win app?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

CR cut the data when exporting to excel

Hi all,
I ve a formula field in crystal report to extract string data from database. Due to some issues, the length of this formula is fixed to display 20 characters. This is ok as the report is exported to excel and excel can display all data no matter this field exceeds 20 characters or not.
However, after I enable the Top border formula editor (Format Field->Format Editor->Border tab->click the button "X-2" button besides Top"), CR can only export 20 characters for this field and cut the rest data. Anyone can help to check?
Best regards,
Grace

Try service Pack 3 and if that does n ot rtesolve it you can work with a support engineer by purchasing a case:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

SSRS 2008 R2 - Missing Data when Exporting to Excel or CSV (Row Count is 500)

Hey Folks,
When exporting SSRS 2008 R2 report to an csv or excel file not all the rows are being exported. Any suggestions on why this is occurring. The number of rows is less then 500 and it seems to be a pretty straight forward export. Any help is
greatly appreciated. Inherited this and not sure if this would be configuration issues or something else. It is happening on a number of reports.
Thanks.

Hi Humbly,
According to your description, when you export report into CSV or Excel format, some rows are missing.
In your scenario, since you are missing data “rows” in your exported file, we are guessing if you have any visibility setting like toggle which hide those records. It’s possible that you have set toggle or visibility in your report. After exporting
Excel/CSV, some data might not appear properly. In SSRS 2008 R2, it has reported this kind of issue about data missing after exporting. However, those scenarios are not exactly same as your issue. It mostly turns out be conflict between data and “layout render”
and related to DataElementOutput property. DataElementOutput property controls export behavior, it indicates which report item data should appear in Excel/CSV render. For more information, please refer to this article: Reporting Services:
Why aren’t all my report columns exporting to CSV and/or XML?.
As we tested in our environment(SSRS 2008 R2), no matter what we export into CSV or Excel, we get same results as in BIDS . So I would like to know your report design structure. If possible, please provide some screenshots about results in BIDS and Excel/CSV
render extension results. It may help us find out the root cause of your issue. Thank you.
Best regards,
Qiuyun Yu

Data not shown in my Crystal report

Hi,
I have created a price list using crystal reports. My database is an excel spreadsheet. Everything works excep that some codes do not show up for some reason? I have a colum that is Manyfacturer number, and certain codes that are on in my database are not reflected in my CR report?
Can anyone help me?
Thanks
Vince

Hi Vince, Check to make sure the data is in Excel, also, if you have any joins at all, make sure they are the correct type.
check to make sure your select statement is not filtering something, I can give you a better answer, with a few more details.
Say, the line the data is missing on, is the whole line missing? is it part of the detail section or a group? if you sort this
data in excel, is there any missing data anywhere on the excel spreadsheet? any way, for a better answer, we will need more details.

Issue sorting dates in export to excel

After exporting to excel, the end-user wants to sort on a date characteristic (posting date), using excel functionalities. This gives an incorrect result:
01.01.2006
01.01.2007
01.02.2006
01.02.2007
If we sort on a time characteristic (calendar day), the list is sorted correctly.
If we run the report via the BEx and then sort (using excel functionalities), it is also correct :
01.01.2006
01.02.2006
01.01.2007
01.02.2007
How can we enable the correct sort?
Thanks for your help!

Dear Karthikeyan,
I was also facing the same issue, and the reason was the diifferrence in the protocol of the J2EE WAS and that of Diapatcher.
check whether J2EE WAS and that of Diapatcher are both on http or on https. If they both are not same, that's the issue.
Hope it helps!!
Warm Regards,
Upendra Agrawal

Underlay row not exported to excel to a single row

Happy New Year to all,
I have an underlay function in Details a section. I also have Details b thru Details z sections. When using the underlay feature in Details a, it lines up beautifully with Details b row. However, when I export to excel data only, Details a appears on its own row above Details b. What can I do to have the underlay row, Details a export alongside Details b in the same row?
Thanks in advance,
Regards,
Zack H.

Hi zack
Iam not giving yout he straight forward solution. but here are my inputs,
1. please check exportingto PDF? if it is fine, then we have to align the report in such a way that export to excel will bring desired result. ioe we have to design, Keeping the result in mind.
Because, the technique used to export to oexcel is line by line scanning method here as to PDF it is snap shot kind of.
Best regards
usama

VbCrLf in expressions cause loss of data on export to Excel

I have a report where it is necessary to embed 3 text boxes in a rectangle, which then lives in a Tablix cell:
Within the highlighted cell lives an expression. It was necessary in this case to use commas to separate the values and then manipulate these in Excel to put them on new lines. VbCrLf, VbLf, VbCr were all tried to no avail. There can be
4 of these but only the first 2 would display. The point of the post is to engage discussion really. This is the work around in this case.
What's funny is all other instances of using rectangles to house text boxes works. And of course, it's not string length because there are other parts of the report that work.
Was not able to rapidly find this on Google so got with a consultant here where I work. It has something to do with the ASCII values returned by VbCrLf, VbCr or VbLf that cause truncation to happen in some cases.
It was hard for me to find so I'm passing the knowledge along. Having a handy consultant saved a lot of spinning wheels on dead-end google searches.
"Fed Phase(s): "
+ IIF(Microsoft.VisualBasic.Strings.Trim(Fields!ENV.Value) =
"", Fields!ENV.Value +
+ IIF(Microsoft.VisualBasic.Strings.Trim(Fields!DTL.Value) =
"", Fields!DTL.Value +
+ IIF(Microsoft.VisualBasic.Strings.Trim(Fields!ACQ.Value) =
"", Fields!ACQ.Value +
+ IIF(Microsoft.VisualBasic.Strings.Trim(Fields!CO.Value) =
"", Fields!CO.Value)
Michael Durthaler

Hi SACSgtMike,
According to your description, you have add VbCrLf in an expression to make four values display on different lines within a textbox. But when exporting the report to Excel, only first two values can display, right?
As we tested in our environment, the VbCrLf can work fine both in preview results and Excel. We have specified the expression like below:
=Fields!SalesTerritoryGroup.Value + "," + vbcrlf + Fields!SalesTerritoryCountry.Value + "," + vbcrlf + Fields!SalesTerritoryCountry.Value + "," + vbcrlf + Fields!SalesTerritoryCountry.Value
The report both in preview mode and Excel work fine. In your scenario, since you mentioned the VbCrLf doesn’t work fine after exporting to Excel, would you please provide some screenshots about results both in preview and Excel for our analysis. Also please
share some sample data and report design.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Output from Web Analysis Related Content will not Export to Excel

I have Web Analysis reports, data in which is sourced from an EIS database. I have drill thru reports that are accessible from "Related Content". The resulting report is created fine, but cannot be exported into Excel. Specifically, I'm prompted for the location of Excel on my pc. Once I browse to it, it will open in Excel.
I have upgraded from Office 10 to Office 12, although I cannot say for certain that is when this problem started occurring.
Secondly, there are no other BI+ issues with export to Excel. For example, FR and WA export fine. The ExcelPath in the webanalysis.properties file takes care of that. I'm hoping there is something similar to update for this problem.
Thanks for reading, hopefully someone else has encountered this and successfully resolved. BI+ version is 9.3.1.

Have you tried the print button in the web analyzer it does export the input filter parameters as part of the exported PDF document.
You can include any additional text elements and use a custom export template if required.

Can not export in excel

Hi, this is not a question, this is an affirmation: a password protected numbers spreadsheet can not be exported in excel (or any other format)!

Yes, it can, but applying the password protection needs to be done as part of the export process: http://help.apple.com/numbers/mac/3.2/#/tan886afc61b
If you are asking if the password protect prevents the export, no, not if the user has the password (and can open it).

Bitmap is not exporting to excel file

Any kind help appreciated.
I have added a bitmap image in my workbook but when i am exporting it into excel or html ,only text part of the title is exporting into excel file .
The bitmap is only visible in discoverer workbook ,after exporting to excel or html, it disappears,
i am using oracle 9i discoverer version 9.0.2.0
thanks,

Hi,
Bitmaps in the workbook titles are not exported. I guess it was just too difficult to do when they added bitmaps into the titles.
Rod West

Currency cell format does not export to excel doc

Hi
i am using new numbers on my macbook also on new OSX mavrics
i have a invoice template that i have used for a good few years
it has a fair amount of formulas and cell formats running
the company i contract to uses windows based (office) system so i save the spreadsheet as an exel compatible file to send to them no problems
untill now
when i export to excel in ether .xls or .xlsx and open the document ether in numbers or on a windows pc on office 2007 all of the currency related cells are changed to 5 digits eg -£8295.00 instead of £25 and the cell format show custom
if i higlight the cell and change to curency the entrys chnge to the correct value
has any one witnessed this ?
it also is the same saving an excel sheet as a mac format CSV file and open that in numbers
please help

I am having exactly the same problem. Need to send invoices for work. Desperate for someone to help with a solution!!! thanks Stuart

Crystal ActiveX Report Viewer Control 11.0 not exporting to excel

I have a wierd problem, I have crystal report XI R2 installed on the server. Client when login on the my application gets prompt to install the activx control; installing of which the report is opening fine.
Whenever the user clicks on the "Export to" button on the activeX and selects excel; the export dialog box just hangs. All other export option pdf, word, rtf are working fine except Excel.
Can someone help me in this....

Hello,
This was a known issue which was solved with the Service Pack 2
https://bosap-support.wdf.sap.corp/sap/support/notes/1205451
So I recommend you to upgrade your version of CR XIR2 to at least SP2.
Regards,
Philippe

SubReport Data not Exported to Excel Crystal Version10

Similar Messages

Maybe you are looking for