Subscriber Manager Times-Ten problem

Hey guys,
I'm trying to install the subscriber manager on a testing environment, using a Linux virtual machine; and after going theough the process I'm having this error massage that I couldn't find a soulution for, so I need help
thank you in advance
[pcube@su-scesm-test bin]$ ./p3sm --sm-status
SM is running.
SM operational state is Failure
Errors/warnings -  during SM startup:
====================================
Error - Times-Ten DB is not set up correctly:
[TimesTen][TimesTen 7.0.5.2.0 ODBC Driver][TimesTen]TT0836: Cannot create data store shared-memory segment, error 22 -- file "db.c", lineno 7787, procedure "sbDbCreate"
1) Error: [TimesTen][TimesTen 7.0.5.2.0 ODBC Driver][TimesTen]TT0836: Cannot create data store shared-memory segment, error 22 -- file "db.c", lineno 7787, procedure "sbDbCreate", sqlState: 08001, errorCode: 836 [TimesTen][TimesTen 7.0.5.2.0 ODBC Driver][TimesTen]TT0836: Cannot create data store shared-memory segment, error 22 -- file "db.c", lineno 7787, procedure "sbDbCreate"
2) Error occured while validating configuration: SMM:name=SMM: java.lang.NullPointerException
Use "--reset-sm-status" option in order to reset the errors.
Command terminated successfully

Hi,
If you haven't found out already, the solution is to increase the shared memory maximum segment size. It is located in /etc/sysctl.conf....
Example:
#  ---- Begin settings for TimesTen
kernel.sem = 250 32000 100 100
kernel.shmmax = 536870912
#  ---- End of settings for TimesTen
Change to:
#  ---- Begin settings for TimesTen
kernel.sem = 250 32000 100 100
kernel.shmmax = 1073741824
#  ---- End of settings for TimesTen
Reboot the machine and the problem should be solved!

Similar Messages

  • SCE SCA BB Console and Subscriber Manager problem

    Hi,
    I need to do a Backup/restore of Subscriber in a SCE2020 engine.
    I try to connect into the SCE with SCA BB Console and Subscriber Manager tools.
    I dosn't work. I can't get the backup .csv file.
    + 22.11.10 12:16:37 CET | INFO | Connecting to 192.168.1.1: Connecting to the SM
    + 22.11.10 12:16:38 CET | INFO | Connecting to 192.168.1.1: Open Subscriber Management perspective
    + 22.11.10 12:16:38 CET | INFO | Connecting to device at 192.168.1.1...
    but nothing more...
    Note:  No problem with Reporter tools.
    Any Idea ?
    Thank you for your help.
    Best regards.
    Seb

    Thanks a lot Gurus!!!   now i can use  SCA BB console  following steps by
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;}
    Tom Debruyne
    by the way i lost all mine last hosts configured there  but no problem i can add them now!
    Thanks Tom!!!

  • My solution (or so I thought) to Power Manager/CPU throttling problems!!!

    I have found a solution to all my Power Manager/CPU throttling problems!!! Though there is some good and bad news.
    {EDIT: The problem has NOT been fixed, even after latest PowerManager (3.62) and BIOS (1.30) versions. Pretty much ignore anything I say below as the problem is still occurring. You can see my full post here: http://forum.lenovo.com/t5/W-Series-ThinkPad-Laptops/W520-Speedstep-not-working-properly-on-battery-...}
    Good news:  I have NONE of the throttling issues or inconsistent CPU frequency problems I was having before on AC or battery power.  Everything, including TurboBoost on battery works! It is completely fixed! (I have no idea how this factors into Lenovo’s statements that TurboBoost is disabled on battery “by design”. There is at least one other post from someone else that also reported TurboBoost was working for them on battery)
    Bad news: I don’t really know which one of the many things I tried actually worked. I am sorry I wasn’t more methodical about recording what I did and checking results, but this was my last ditch effort to get this fixed on my own without sending the system in for repair and frankly, I didn’t think it would work. Now that it has worked, I’m hoping my steps can help others.
    For anyone interested, here’s what I did… and before anyone says something like “That has nothing to do with managing power/cpu, why would that help?!… etc., please keep in mind I’m just stating exactly what I did. I am aware some of the steps may not be relevant, but who knows… We all know how weird PC’s are sometimes, even the smallest, oddest thing may resolve a problem.So anyway, here goes. 
    **IMPORTANT** Not sure how many noticed, but there was a new version of Power Manager released a few weeks ago, 3.62. The PM driver seems to have stayed the same. That alone could very well be the sole fix, I’m not sure. You may just want to completely remove PM and PM driver and install the latest version before trying any of the steps below.
    1)Made a complete system image via Windows built-in backup feature
    2)Disable any 3rd party fan/CPU control utilities (Throttlestop, etc). Make sure they are also not going to run at startup or from a   scheduled task
    3)Remove Power Manager Driver, then remove Power Manager software
    4)Reboot to Windows
    5)Remove all traces of the Power Manager drivers/software directories (think it was something like C:\readyapps and C:\drivers.) **For some odd reason after I did this, my wireless stopped working but it resolved itself by the time I was done with these steps, strange
    6)Reboot
    7)Access BIOS and reset all settings to default
    8)Boot into Windows, downgrade to BIOS 1.25 [UEFI: 1.25 - 8BET44WW / ECP: 1.14 8AHT32WW ]  via the Windows flash utility. I wanted to downgrade all the way back to 1.06, but the software would throw up some error for any version prior to 1.25 and wouldn’t proceed
    9)Reboot to Windows; make sure system booted w/ out issues
    10)Reboot again, access BIOS, reset to defaults again
    11)Shut down system
    12)Disconnect AC power. Remove main battery. Access and disconnect system backup (a.k.a CMOS) battery under keyboard. Discharge residual power in the system (there are various ways to do this, but you could just leave the battery disconnected for a few minutes).  Visually inspect the system for anything funky…my system had a slightly but noticeably loose CPU/GPU heat sink/fan assembly power connector.
    13)Reconnect backup battery. 
    14)Reconnect AC power but leave main battery disconnected.
    15)Power on. Should get a message indicating “checksum error, system time reset” or something like that.
    16)Reboot to Windows. Verified still okay.
    17)Downloaded latest BIOS version, 1.26. This time I burned the bootable BIOS flash CD instead of running it through Windows.
    18)Restart and boot from disc, flash BIOS to 1.26. Once complete, restart. Verify BIOS set to defaults.
    19)Boot back into Windows.
    20)Install latest Power Manager driver (1.62 ), reboot if/as prompted. Install Power Manager (3.62), reboot as prompted.
    21)Boot into Windows, verified Power Manager was active and working. Verified TurboBoost was working. Restarted system a few times and played around with Power Manager for a bit to see if the different power plans worked and retained the settings, all the while monitoring the Intel TurboBoost utility and PM’s own “power gauges”. Let system Sleep, changed power sources, resumed, etc. Everything was working great.
    22)Shutdown, reconnect main battery. Booted into Windows. Again, fiddled with Power Manager for a bit, switching between power plans and AC/battery power. Still worked great.
    23)Success! 
    That’s it.  Again, this is not a guaranteed fix guide. These are just simply the steps that I took on my system that resolved the problems many of us are having. Hopefully it will work for others.
    T520 4239-CTO | i5 2410M
    W520 4270-CTO | 2720QM | 16GB RAM | Quadro 1000M | BIOS 1.30 | PwrMgr 3.62

    All I basically did was download and install...
    (Chipset driver) http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/oss924ww.exe
    (PM driver)  http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/83ku14ww.exe
    Now, I did chipset first (didnt ask to reboot) then installed the PM driver (did ask to reboot)
    I rebooted.... then I went into bios (1.26) and set everything to default... then restarted saving changes...
    Since I prefer not using optimus I changed the display settings in bios right after saving the default settings...
    Not sure whether or not you really had to go into bios... but everything seems to be working...
    My settings in PM is set to Maximum Power in the Advanced tab,  3rd party monitoring tools is TPFanControl and HWInfo64.... 
    W520 (4270 CTO) | i7-2820QM | 16GB RAM 1333 MHz | Runcore MSATA SSD | 2x Kingston SATA2 SSD | Quadro 2000M | FHD | Windows 7

  • Unable to insert into oracle db using times ten

    I have a times ten 6.0 installation on my m/c connected to an oracle 10.2.0.2 database. The database is a remote database. My application is deployed to oracle application server (10.1.3.1 SOA). I am getting the following SQLException when I try to insert.the first row.
    java.sql.SQLException: [TimesTen][TimesTen 6.0.4 ODBC Driver][TimesTen]TT5105: OCI initialization failed. -- file "bdbEnv.c", lineno 275, procedure "ttBDbEnvAlloc"
    My env is as follows
    OS = Windows 2000
    DataSource = User DSN
    First Connection
    Permanent Data Store = 100
    Temporary Data Store = 50
    Connections = 20
    Synchronous write through cache
    I tried a select on the table before insert and it worked. Using ttisql I can insert into this table without any problem. Using a standalone java program I am able to insert data into this table. But from within an appserver I am facing this issue.
    Thanks in advance for any help.
    Regards,
    Mahesh.

    Jimmyb,
    Are you logged in as the user that owns that table?
    Yes.
    If yes, then there are no triggers on this table.
    That is true.
    You will need to populate the ID column with your insert statement.
    Just did that.
    Usually, the sequence is very similar to the table name.
    Yes I tried few of them in my sql query and it said "sequence cannot be found"
    Isn't there some way that it will list the name of the sequence currently being used in a table?

  • Times ten to improve performance for search results in Oracle eBS

    Hi ,
    We have various search scenarios in our ERP implementaion using Oracle Apps eBS, for example searching for an item . Oracle apps does provide item search but performance is not great. We have about 30 million items and hence to improve the performance of the search thought Times ten may help.
    Can anyone please clarify if Times ten can be used to improve performance on the eBS database , if yes how.

    Vikash,
    We were thinking along the same lines (using TimesTen for massive item search in e-Business Suite). In our case massive Item / parametric search leveraging the Product Information Management application. We were thinking about setting up a POC on a Linux Server with a Vision Instance. We should compare notes?
    SParker

  • Caching configuration (Times Ten - Oracle 10g)

    Hi all,
    I have managed to setup Times Ten and get a cache group configured against a table in an oracle 10g instance.
    That all works so great. My question is how do I define a set of cache groups and get Times Ten to load them in automatically all together. So what I am saying, is I dont want to have to enter these cache group definitions in manually via ttisql command line (as I have done this time).
    Could someone please point me in the right direction with this? Also I would like to be able to set TT up such that the cache agent is automatically started. Is this possible?
    Thanks,
    Dan

    Hi Dan,
    In the same way that you can create cache groups through a ttIsql script you can also load them from a script using the LOAD CACHE GROUP and REFRESH CACHE GROUP commands.
    However, let's remember that TimesTen is a persistent database and so you should not need to re-create the cache groups nor re-load them just becasue you have stopped and started TimesTen. The cache group definitions and data will still be present as they are persistently stored. Also, if you have a READONLY or USERMANAGED cache group using AUTOREFRESH then the changes that occur in oracle are captured and refreshed to the cache group(s) automatically.
    As for starting the cache agent 9or the repagent0 automatically, this kind of depends on how you are managing the startup/shutdown of the cache datastore (i.e. what itss ramPolicy is). You can set the cachePolicy for the datastore using ttAdmin as follows:
    ttAdmin -cachePolicy always DSNname
    this tells TimesTen that the cache agent should always be running for this datastore. However, a side effect of this is that the datastore will allways be loaded in memory when the TimesTen instance is up (i.e. the TimesTen main daemon is running). If you want to be able to start and stop the datastore manually (or from a script) then you will likely be using a ramPolicy of manual and running some script to load/unload the datastore into/from memory. If so then just add the relevant ttadmin -cacheStart|-cacheStop commands to that script.
    Chris

  • Times ten

    Hi all,
    I want to use times ten to cache a part of a database on 2 sites.
    The product seems incomplete and difficult to adapt for an existing application.
    Is someone use it ?
    Is there a roadmap on this product to make it nearest from oracle?
    Is there any other solution to cache a part of database on site side to avoid network latency problems (on frequently accessed reference tables) ?
    Thanks
    Jean-Luc

    some other options i can think about
    you may cache those reference tables in the database buffer, you may also cashe them in your application server, cashe them in browser.

  • Time out problem while uploading large bpel processes into oracle soa suite

    Hi everyone,
    I'm using oracle soa suite 10.1.3.4.0 and I'm encountering time out problem while trying to upload a 5MB bpel process into my bpel process server located in the LAN network. The error is coming from apache common file upload.
    Is there a way to increate the connection time out for oc4j to avoid this problem?
    Thanks for any help.
    Regards
    Esfand

    Hi Marc.
    Thanks for your reply. I increased the transaction manager time-out but still I have the same problem. I believe this is something related to oc4j settings and related to upload bpel process. here is my stack trace output:
    79: A problem occured while connecting to server "192.168.0.12" using port "8888": bpel_JazbModaresJadidBPEL_1.0.jar failed to deploy. Exception message is: javax.transaction.RollbackException: Timed out
    at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:94)
    at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:324)
    at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
    at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
    at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    Caused by: oracle.oc4j.rmi.OracleRemoteException: An exception occurred during transaction completion: ; nested exception is:
    javax.transaction.RollbackException: Timed out
    at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:152)
    at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:57)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
    at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
    at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
    at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
    ... 25 more
    Caused by: javax.transaction.RollbackException: Timed out
    at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:664)
    at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:273)
    at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:162)
    at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:472)
    at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:137)
    ... 33 more
    Total time: 4 minutes 30 seconds
    The bpel jar file is about 2MB and is uploaded from my machine located in the same LAN.
    Any hints?
    Thanks
    Esfand

  • SCA console 3.6.5 cant communicate with SM subscriber manager

    my setup is SCE 8000 and SCA console 3.6.5 and SM 3.6.5 and CM 3.6.5
    when i communicate from SCA console to Subscriber manager its cant retrieve any information so i downgrade the SCA console to 3.6 after downgrade i success to fetch the subscriber from SM but i still have an comparability issue with SCE CM because SCA CM 3.6 and CM is 3.6.5
    so i need to know how can solve the problem in SCA console BB 3.6.5

    thanks
    the problem was in the SCA console 3.6.5 its
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:Arial;
    mso-bidi-theme-font:minor-bidi;}
    a known defect
    the problem is
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:Arial;
    mso-bidi-theme-font:minor-bidi;}
    1. Close the SCA BB application if it is running.
    2. Backup the file 'engageui.jar' located in C:\Program Files\Cisco SCA\SCA BB Console 3.6.5\plugins\com.cisco.scasbb.client.ui.engage_3.6.5
    For example, copy it to your personal folder.
    3. Copy the file attached to this email to the same directory (C:\Program Files\Cisco SCA\SCA BB Console
    3.6.5\plugins\com.cisco.scasbb.client.ui.engage_3.6.5)
    4. Run the SCA BB, open SM GUI, You should be able to see the subscribers detail in the GUI.

  • Times Ten Cache

    I have system(Super Computer) which has 4.2 terra byte of memory. Is it possible to install Times ten into that machine?
    how much Cache is allocated to it? what happens if the allocated cache exhausts?

    Provideds the machine runs an O/S and CPU type that is supported by TimesTen then you can install TimesTen on the machine. The amount of memory allocated to TimesTen is controlled by you via configuration parameters. If the memory allocated to TimesTen becomes full (e.g. you fill it with data) then any operation that must allocated more memory will fail with a specific error code indicating that the datastore is full.
    TimesTen provides various mechanisms to help manage the memory such as dynamic caching (load on demand) and data aging.
    Chris

  • Help, I am about to pull my hair out, can't get into a locked drive and Time Machine problem

    I've screwed everything up, I think.  I had Time Machine doing backups to an external 500Gig drive and somehow it got locked.  I went into Get Info to try and change the access but it won't allow me.  On top of this problem, my original drive died and I can't get into Time Machine to restore.  When I click "Enter Time Machine", nothing happens.  I created an eDisk and a startup disk to another external drive that I'm using now, but since everything that's been backed up is on the other drive that I can't access.  When I try accessing the drive it gives:  "The folder “G-DRIVE ” can’t be opened because you don’t have permission to see its contents."  I'm not knowledgeable enough to work from the command line, so if I need to do that to access the drive, please walk me though it.  As for the Time Machine problem, I have no idea how to recover anything since it won't even come up, it just sits there.  Outside of blowing my brains out, I don't know what to do.  Any help would be greatly appreciated as I can't afford to take it to Apple to let them try and fix it.

    Hello, not sure how this might affect a TM drive, or not, but...
    Here is what i needed to do for my drive "320GB HD", the last command is just for clean up
    Open Terminal and type these commands carefully with the spaces & change 320GB HD to the name of your drive.
    sudo chflags 0 "/volumes/320GB HD"
    sudo chown root "/volumes/320GB HD"
    sudo chmod 1775 "/volumes/320GB HD"
    sudo -k
    That said, these should be sufficient to do the job:
    sudo chflags 0 "/Volumes/320GB HD"
    sudo chmod a+rx "/Volumes/320GB HD"

  • Time out problem in BPS

    BPS friends,
    We have a planning function to copy Versions based with some filters. The copy function takes 5 hours and times out after that. The function is reaching max buffer size as recommended by SAP so we cant increase the buffer size anymore.
    We are on BW-BPS 3.5.
    How can I solve this time out problem? Please respond to me.

    Hi Pat,
    How many record did you copy ??
    Could you restrict the copy in not 1 package ??
    Package per package ...
    I suggest you ..
    e.g. you have restriction by a 0CALMONTH / something ..
    Then,
    You can copy e.g. for January to March, then March to August, etc.
    You can automate it by planning sequence.
    Hopefully it can help you a lot.
    Regards,
    Niel.
    thanks for the points you choose to assign.

  • How to configure the memory settings based on the number of VSAs for Cisco service control Subscriber Manager?

    Hey Good day to all,
    please help with this; when installing the Service Control Management Suite Subscriber Manager scms-sm, and at the secound step where you have to determine the system memory settings, there are several attributes to be considered:
    the maximum number of the subscribers
    with or without qouta manager
    number of VSAs used
    so, my question is about the memory configuration parameters versus the number of VSAs used, since you must multiply with certain values, set already on a table on the Cisco website, but as shown in the example under the table these values are multiplied to all the attributes except that the example dosn't show the value of the temp-size memory;
    so please confirm this to me:
    the temporary memory size "temp_size" is not related to the number of VSAs implemented!
    this is a screen shot from Cisco website:
    thank you in advance for helping

    Hi Tessitori,
    The best way to cache, index and query that amount of data in Coherence is to use a number of stand alone JVMs (i.e. com.tangosol.net.DefaultCacheServer s) to 'manage' the data. Then access (query) that cache from your application servers instances. For an indexing and querying example take a look at this FAQ item
    If you would like to discuss this further please email me at [email protected]
    Later,
    Rob Misek
    Tangosol, Inc.
    Coherence: Cluster your Work. Work your Cluster.

  • When I tap the mail icon on my iPhone 4s, the menu of email servers pops up.  I already have a me acct that I check all the time, no problem.  So I choose iCloud, sign in and it tells me that I already have an acct-.so why can't I get to my emails then?

    When I tap the mail icon on my iPhone 4s, the menu of email servers pops up.  I already have a me acct that I check all the time, no problem.  So I choose iCloud, sign in and it tells me that I already have an acct….so why can't I get to my emails then?  I've turned the phone off and on twice....that has fixed it in the past but not this time....

    all fixed ha

  • I have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    i have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

Maybe you are looking for

  • Center text in table column expanding and distorting side columns

    Anyone out there that can help me with this, I would appreciate it. I've created the table for this web page in photoshop and sliced it up. The center column is were the body of the text is displayed as you can see from the screen shot. The body text

  • Adobe Reader 8.1 permission problems

    When I install Adobe Reader 8.1 as system administrator, it works fine for me as a user. However, when other user accounts on my computer try to access Reader, it demands that they first enter a system administrator ID and password, which I don't wis

  • Where is HELP key on new Aluminum Keyboard?

    Instructions for Boot Camp tells me to use the HELP key for the INSERT command in Windows. The aluminum keyboard has no HELP key. Where is the HELP key the aluminum keyboard??

  • "Unable to read from or write to your player" Zen 1

    I have a new Creative Zen 6G and am using Windows Vista. While using the Creative Media Organizer, I tried to create a new playlist. The player shows all my folders, and when I try to open the folder that contains the majority of my music, the messag

  • Dreamweaver Freeze fix

      I have had Dreamweaver cs6 lock up for 10-15 seconds every time I go to another program window and back. Tried to impliment the fix here: http://helpx.adobe.com/dreamweaver/kb/hang-opening-document-dreamweaver-cs5.html but when I go to user/usernam