Substitute of ADD_JOB_EMAIL_NOTIFICATION procedure

I wanted to know what is the substitute in Oracle 11g database enterprise manager for the notifications which are invoked using DBMS_SCHEDULER.add_job_email_notification procedure. I want to have an email notification on the completion of a backup job using EM.
I hope my question is clear of what are the steps to configure a notification for a backup job completion using enterprise manager.
Please revert with the reply to my query.
Regards

Hi,
Request the experts to please reply.

Similar Messages

Query on event based job in a client schema and not SYS schema

Hi, I am fairly new to oracle job scheduler and wanted your inputs on how to create a event based job that sends a mail based on success of another job.
I was able to implement this with the jobs being created under SYS schema. I did get email notifcation when errors were logged in exception table.
However, now the requirement has changed to create the jobs under a client specific schema.
The jobs got created successfully in CLIENT schema but the event based job is not working. It does not send the email notification.
I feel this is to do with not correctly subscribing to the event queue {sys.scheduler$_event_queue}.
Can CLIENT schema use the agent "AGENT" created under SYS to subscribe to the Scheduler event queue {sys.scheduler$_event_queue}? CLIENT is the schema in which the all jobs and procedures are created.
BEGIN
DBMS_AQADM.ENABLE_DB_ACCESS('AGENT', 'CLIENT');
END;
--Main Job that will load data and errors will be logged into exception table
BEGIN
dbms_scheduler.create_job( job_name=> 'CLIENT.LOAD_DATA',
job_type=>'PLSQL_BLOCK',
job_action=>'BEGIN CLIENT.p_loaddata;
END;',
start_date=>systimestamp,
repeat_interval=>'FREQ=MINUTELY;INTERVAL=1;',
number_of_arguments=>0,
enabled=> true);
END;
--set raise_events attribute = job_succeeded for main job
BEGIN
DBMS_SCHEDULER.set_attribute ('CLIENT.LOAD_DATA', 'raise_events', DBMS_SCHEDULER.job_succeeded);
END;
--Event Job that will send email based on condition. Condition is checked in procedure CLIENT.p_check_sendmail; If errors are found in the exception table, this job will raise exception and will be JOB_FAILED status. This job will send a email notification.
BEGIN
DBMS_SCHEDULER.create_job (       job_name          => 'CLIENT.EMAIL_JOB',
job_type          => 'PLSQL_BLOCK',
job_action        => 'BEGIN CLIENT.p_check_sendmail;                                   END;',
event_condition => 'tab.user_data.event_type = ''JOB_SUCCEEDED'' and tab.user_data.object_name = ''LOAD_DATA''',
queue_spec        => 'sys.scheduler$_event_queue,AGENT',
enabled          => true);
END;
BEGIN
dbms_scheduler.add_job_email_notification ( job_name => 'CLIENT.EMAIL_JOB',     recipients => '[email protected]',events => 'JOB_FAILED');
END;
Is the way i am subscribing to the event queue correct? Could you please share an example/document of event based job in a schema other than SYS and how subscription is being done to event queue?
Thanks

Hi,
It's a good decision you made because you shouldn't create objects in the SYS schema. I see you're using the add_job_email_notification procedure, so I'm assuming you're on 11g onwards.
This procedure is meant to make the job easy for you. That is, you don't need to worry about setting up AQ, the procedure does it all for you. All you need to do is setup the mail server if not already done, and call this procedure to add the mail notification. That's it.
You can also specify a filter to the add_job_email_notification procedure, so maybe you could specify directly your CLIENT.LOAD_DATA job to this procedure.

Query on javax.mail.event.MessageCountListener

Hi All,
Have a java batch which reads email from an inbox (IMAP) and processes new mails received. we are using javax.mail.event.MessageCountListener to listen for any new mails received and add those to a arraylist which can be processed.
During some point of time, javax.mail.event.MessageCountListener was not adding new mails to the list even though the thread was active and running.
Is there a way to check javax.mail.event.MessageCountListener is up and active , listening to new mails or not.
If it is not, then we have to make that active..
Any better option/suggestions
Thanks in Advance.
-Sree

Hi,
It's a good decision you made because you shouldn't create objects in the SYS schema. I see you're using the add_job_email_notification procedure, so I'm assuming you're on 11g onwards.
This procedure is meant to make the job easy for you. That is, you don't need to worry about setting up AQ, the procedure does it all for you. All you need to do is setup the mail server if not already done, and call this procedure to add the mail notification. That's it.
You can also specify a filter to the add_job_email_notification procedure, so maybe you could specify directly your CLIENT.LOAD_DATA job to this procedure.

Query counter : event 3100 not logged in table RSDDSTAT_OLAP

Hi experts,
We have a customer scenario where in the table RSDDSTAT_OLAP table is not getting populated with the eventID '3100' when a query is executed. Due to this the query counter is not getting any value ( according to extractor logic RSTC_BIRS_OLAP_AGGREGATED_DATA)
The changes of the notes : 1250182 ,1505325, 1093755 are already present in the cutomer system.
Hence would like to know the cases in which OLAP read eventid 000003100 would not get recorded in the table RSDDSTAT_OLAP, on execution of the query .
Thanks in Advance,
Keerthi

Hi,
It's a good decision you made because you shouldn't create objects in the SYS schema. I see you're using the add_job_email_notification procedure, so I'm assuming you're on 11g onwards.
This procedure is meant to make the job easy for you. That is, you don't need to worry about setting up AQ, the procedure does it all for you. All you need to do is setup the mail server if not already done, and call this procedure to add the mail notification. That's it.
You can also specify a filter to the add_job_email_notification procedure, so maybe you could specify directly your CLIENT.LOAD_DATA job to this procedure.

Add Email Job Notification via SQL Developer

Hello,
I'm a novice in the Oracle Scheduler space and I have what is likely a novice question. However, I'm thoroughly turned around after searching and would gladly welcome some help.
I'm using SQLdeveloper to utilize Oracle Scheduler within my schema.
A procedure has been successfully created. The job which executes the procedure is also successfully configured.
Next I'd like to configure email notification for certain events.
I've found a number of posts regarding the ADD_JOB_EMAIL_NOTIFICATION procedure.
I.e., http://docs.oracle.com/cd/E11882_01/appdev.112/e25788/d_sched.htm#ARPLS72277
However, I'm having trouble identifying how to get started implementing this within SQL Developer.
Can someone please help with how the ADD_JOB_EMAIL_NOTIFICATION can be implemented within SQL developer?
Another point I want to mention: in a previous prototype, I found a wizard to configure the email notification. I'm not seeing that now. Is there a wizard with SQL Developer in which this information can be configured?
Extremely grateful for any help you can provide.
Thanks - Fritz

Thank you for your response.
I'm entering that block into a SQL worksheet and it has now been accepted. I was mis-interpreting an error message which was thrown in my earlier attempts. Looks like the name of my job was problematic. I've renamed that and the add job email notification block is now being completed.
Thanks much for your help.
Also I've tried using the get_scheduler_attribute to see if an email server is already configured. However, I'm not using this correctly either. Only these attributes can be viewed through get scheduler attribute.
Scheduler Attribute
Description
default_timezone
Default time zone used by the Scheduler for repeat intervals and windows
log_history
Retention period in days for job and window logs
max_job_slave_processes
Maximum number of job slave processes that the Scheduler can start. May be NULL.
current_open_window
Name of the currently open window
event_expiry_time
Time in seconds before an event generated by the Scheduler and enqueued onto the Scheduler event queue expires. May be NULL.
Any suggestions of how to view which notifications are configured for a job?
Thanks again! Fritz

DBMS_SCHEDULER send email notification issue

Hello,
We have a database Oracle Database 11g Release 11.2.0.4.0 - 64bit Production running on Windows 2008 server r2. We have 3 schemas. We have the exact same jobs on each schema. 2 of the schemas send the email notifications correctly. One simply doesnt!!! We have checked pretty much everything, Grants etc and everything seems to be the same.
Does anyone have any ideas how to resolve this.
Thanks!

Hi,
Are you talking about the ADD_JOB_EMAIL_NOTIFICATION procedure? If yes, take a look at this thread to see if it helps:
Schedular Job Email Notification

Best way to schedule and get notification for plsql job

hi
i would like to execute a procedure on weekly basis and want to be notified if the job fails
which is correct way of doing this?
1. create user defined metric and call the procedure this way
2. create scheduler job dbms_scheduler
the other question is while I have exception handling within plsql procedure, how will the grid agent or dbms_scheduler distinguish between success and failure ?
do I have to set a variable or execute special command as part of exception handling ?

Have you researched the ADD_JOB_EMAIL_NOTIFICATION procedure of DBMS_SCHEDULER?
http://docs.oracle.com/cd/E11882_01/appdev.112/e25788/d_sched.htm#BABBFBGI
This procedure adds e-mail notifications for a job. E-mails are then sent to the specified list of recipients whenever any of the specified job state events is raised.For more information about monitoring jobs, including a description of job logs and job email notifications, look here:
http://docs.oracle.com/cd/E14072_01/server.112/e10595/scheduse008.htm
You can configure a job to send e-mail notifications when it changes state. The job state events for which e-mails can be sent are listed in Table 28-13. E-mail notifications can be sent to multiple recipients, and can be triggered by any event in a list of job state events that you specify. You can also provide a filter condition, and only job state events that match the filter condition generate notifications. You can include variables like job owner, job name, event type, error code, and error message in both the subject and body of the message. The Scheduler automatically sets values for these variables before sending the e-mail notification.

Error when try to call a pl/sql procedure from the .xsql file

I tried to call a pl/sql procedure like this:
<?xml version="1.0"?>
<page connection="omtest5" xmlns:xsql="urn:oracle-xsql">
<xsql:include-owa>
sampleowaxml.testone
</xsql:include-owa>
</page>
but I got the following error message:
<?xml version="1.0" ?>
- <page>
- <xsql-error action="xsql:include-owa">
<statement>declare buf htp.htbuf_arr; param_names owa.vc_arr; param_values owa.vc_arr; rows integer := 32767; outclob CLOB;begin param_names(1) := 'HTTP_COOKIE'; param_values(1) := ''; param_names(2) := 'SERVER_NAME'; param_values(2) := 'mxfang-nt.us.oracle.com'; param_names(3) := 'SERVER_PORT'; param_values(3) := '80'; param_names(4) := 'SCRIPT_NAME'; param_values(4) := '/servlets/oracle.xml.xsql.XSQLServlet'; param_names(5) := 'PATH_INFO'; param_values(5) := '/xsql/test/myproject.xsql'; param_names(6) := 'HTTP_USER_AGENT'; param_values(6) := 'Mozilla/4.0 (compatible; MSIE 5.01; Windows NT)'; owa.init_cgi_env(6,param_names,param_values); sampleowaxml.testone owa.get_page(buf,rows); dbms_lob.createtemporary(outclob,true,dbms_lob.session); for i in 1..rows loop dbms_lob.writeappend(outclob,length(buf(i)),buf(i)); end loop; ? := outclob; ? := DBMS_LOB.INSTR(outclob,CHR(10)| |CHR(10));end;</statement>
<message>ORA-06550: line 3, column 3: PLS-00103: Encountered the symbol "OWA" when expecting one of the following: := . ( @ % ; The symbol ":=" was substituted for "OWA" to continue.</message>
</xsql-error>
- <xsql-error action="xsql:include-owa">
<message />
</xsql-error>
</page>
This error message is very similiar to the message that Shanthir posted on Jan, 21. I did run the dbmslob.sql, but it doesn't help. Anybody has ideas how to solve it?
I used the PL/SQL web toolkit provided by OAS4.0.8.1. I believe oracle web agent is replaced by this toolkit.
Thanks,
Min
null

Hi,
Glad that somebody else too got this problem. Well, as I had mentioned in my previous posting too, I think there are some procedures in the package, dbms_lob, like the writeappend, createtemporary etc.. which is not found in my dbms_lob.sql file, I am using 8.0.5, but I found these procedures in the 8i, I think it is becos of that.
By the way if anybody got this solution and got any workaround, please help me too.
I am still waiting for the solution to that.
Shanthi

PL/SQL Stored procedures vs C# code.

Hi All
We are going to start designing a kind of transactional application with huge volume of data (150 million records per month). Our selected DB engine is Oracle 10.g while C# is selected development language.
Because of big volume of data performance is one of the most important factors for us, and the technical design should gain the best level of performance.
What i'm looking for and studing for it is to define which kind of operation shall be done by Stored Procedure which will be written by PL/SQL or by C# classes?
I don't interested in to handle complicated and complex jobs using PL/SQL stored procedures while the performance really deserve it.

Hello,
Well, my philosophy is to leverage the database as much as possible. I have worked with applications that had no "select", "insert", "update" or "delete" statements in them. Instead, stored procedures and functions inside of PL/SQL packages and bodies were used. Some people will argue strongly against that, but I belong to the "thick database" group rather than the "the database is just a persistence layer that I have to deal with" group. To me it makes sense to co-locate the code that works on the data with the data. If you are working with large volumes of data, I find the bulk operations available via PL/SQL to be very handy.
Here's an AskTom thread that deals with this general issue:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:12083187196917
Whilst the thread is primarily about Java, you can substitute just about any other language and the meaning will still carry over.
Regards,
Mark

Returning 2D array from a stored procedure

hi,
i'm trying to return a nested table from a procedure.can any one help me out i'm getting the fallowing error.
SQL> ed
Wrote file afiedt.buf
1 declare
2 TYPE data_t IS TABLE OF NUMBER
3 INDEX BY PLS_INTEGER;
4 TYPE array_t IS TABLE OF data_t
5 INDEX BY PLS_INTEGER;
6 array array_t;
7 begin
8 Sp_test(123,'12-jan-08',array);
9 dbms_output.put_line(array (10) (1));
10* end;
11 /
Sp_test(123,'12-jan-08',array);
ERROR at line 8:
ORA-06550: line 8, column 1:
PLS-00306: wrong number or types of arguments in call to
'SP_TEST
ORA-06550: line 8, column 1:
PL/SQL: Statement ignored
The procedure is
CREATE OR REPLACE PROCEDURE Sp_test(S_KEY NUMBER,V_DATE DATE, array_out OUT array_t) as....

Below is the error i got when using the above suggestion.
SQL> ED
Wrote file afiedt.buf
1 DECLARE
2 TYPE data_t IS TABLE OF NUMBER
3 INDEX BY PLS_INTEGER;
4 TYPE array_t IS TABLE OF data_t
5 INDEX BY PLS_INTEGER;
6 begin
7 Sp_test(123,'12-jan-08',array REPORT.ARRAY_T);
8 dbms_output.put_line(array (10) (1));
9* end;
10 /
Sp_test(123,'12-jan-08',array REPORT.ARRAY_T);
ERROR at line 7:
ORA-06550: line 7, column 32:
PLS-00103: Encountered the symbol "REPORT" when expecting one of the
following:
. ( ) , * @ % & | = - + < / > at in is mod not range rem =>
.. <an exponent (**)> <> or != or ~= >= <= <> and or like
between ||
The symbol "." was substituted for "REPORT" to continue.

Calling stored procedure from a stored procedure

I have a stored procedure that accepts a customer prefix like "abc" and returns a customer document number like "abc-0021". (Thanks V Garcia)
This sp works when I call it from SQL Plus Worksheet.
But I need to call it from another stored procedure and store it in a local variable so that I can insert it into a table with the rest of the information.
This is what I have tried so far:
CREATE OR REPLACE PROCEDURE "SCHEMANAME"."SP_XXTESTXX" ( seq_name in
    varchar2)
AS
      id_out varchar(10);
BEGIN
   execute SP_GET_NEXT_DOC_NUMBER(seq_name,:id_out);
   print id_out;
END;but this will not compile. I get this error:
Line # = 8 Column # = 12 Error Text = PLS-00103: Encountered the symbol "SP_GET_NEXT_DOC_NUMBER" when expecting one of the following:     := . ( @ % ; immediate The symbol ":=" was substituted for "SP_GET_NEXT_DOC_NUMBER" to continue.
Line # = 8 Column # = 41 Error Text = PLS-00049: bad bind variable 'ID_OUT'
Line # = 10 Column # = 10 Error Text = PLS-00103: Encountered the symbol "ID_OUT" when expecting one of the following:     := . ( @ % ; The symbol ":=" was substituted for "ID_OUT" to continue.

I think I got it.
CREATE OR REPLACE PROCEDURE "SCHEMANAME"."SP_XXTESTXX" ( seq_name in
    varchar2)
AS
id_out varchar(10);
BEGIN
SP_GET_NEXT_DOC_NUMBER(seq_name,id_out);
dbms_output.put_line(id_out);
END;This works like I wanted it to do.

How to suppy and get the results from a procedure dynamically.

Hi all,
I have a simple procedure, which should prompt five times for
values and display the values dynamically. but it is not
behaving like that. while compilation it is asking for the
value, once i enter the value , it is prompted that procedure
created. while executing, it is diplaying all five same values
what i have entered at compilation time. Please check out. Here
is the code.
create or replace procedure test is
t_var integer;
t_count integer := 0;
begin
loop
t_var := &r;
dbms_output.put_line('The value is: ' || t_var);
If t_count = 5 Then
Exit;
End If;
t_count := t_count + 1;
end loop;
End;
Regards,
G. Rajakumar.

See now what happens is
When u use &variable in sql or plsql it tries to substitute with
the value held by that variable. If it dosent find that value in
that session then it prompts for one. (that is why ur proc asks
for value only once)
What happens in your proc is
fisrt time it will ask for &r value, but subsequent i will not
ask because when second time it tries to do &r in your prog it
finds the value that u had entered above. Also as u said that
prog takes the input and dosent show anything this is cos sql
engine takes the value and compiles the proc it actucally shows
when u run it. U can have look at the below executed program
In this once u have eneterd say value 199 then it display 199
for those many number of times. I hope this answers your
question.
SQL> ed
Wrote file afiedt.buf
1 create or replace procedure test is
2 t_var integer;
3 t_count integer := 0;
4 begin
5 loop
6 t_var := &r;
7 dbms_output.put_line('The value is: ' || t_var);
8 If t_count = 5 Then
9 Exit;
10 End If;
11 t_count := t_count + 1;
12 end loop;
13* End;
SQL> /
Enter value for r: 12
old 6: t_var := &r;
new 6: t_var := 12;
Procedure created.
SQL> exec test
The value is: 12
The value is: 12
The value is: 12
The value is: 12
The value is: 12
The value is: 12
PL/SQL procedure successfully completed.
SQL>

PL/SQL: Executing a procedure from within another procedure

Hello, I'm a newbie and I need help on how to execute procedures from within another procedure. The procedure that I call from within the procedure have return values that I want to check.
I tried: EXECUTE(user_get_forum_info(p_forumid, var_forum_exists, var_forum_access, var_forumname));
but I get the error message:
PLS-00103: Encountered the symbol "USER_GET_FORUM_INFO" when expecting one of the following::= . ( @ % ; immediate
The symbol ":=" was substituted for "USER_GET_FORUM_INFO" to continue.
And when I tried: EXECUTE(user_get_forum_info(p_forumid, var_forum_exists, var_forum_access, var_forumname));
I get the error message:
PLS-00222: no function with name 'USER_GET_FORUM_INFO' exists in this scope
PL/SQL: Statement ignored
The procedure USER_GET_FORUM_INFO exists. (don't understand why it says "no FUNCTION with name", it's a procedure I'm executing)
I'm stuck so thanks for any help...
Below is all the code. I'm using Oracle 9i on RedHat Linux 7.3.
================================================================================
CREATE OR REPLACE PROCEDURE user_forum_requestsaccess (
p_forumid IN NUMBER,
p_requestmessage IN VARCHAR2
AS
var_forumid NUMBER;
var_forum_exists NUMBER;
var_forum_access NUMBER;
request_exists NUMBER;
var_forumname VARCHAR2(30);
FORUM_DOESNT_EXIST EXCEPTION;
FORUM_USER_HAS_ACCESS EXCEPTION;
FORUM_REQUEST_EXIST EXCEPTION;
BEGIN
SELECT SIGN(NVL((SELECT request_id FROM forum.vw_all_forum_requests WHERE forum_id = p_forumid AND db_user = user),0)) INTO request_exists FROM DUAL;
EXECUTE(user_get_forum_info(p_forumid, var_forum_exists, var_forum_access, var_forumname));
IF var_forum_exists = 0 THEN
RAISE FORUM_DOESNT_EXIST;
ELSIF var_forum_access = 1 THEN
RAISE FORUM_USER_HAS_ACCESS;
ELSIF request_exists = 1 THEN
RAISE FORUM_REQUEST_EXIST;
ELSE
INSERT INTO tbl_forum_requests VALUES (SEQ_TBL_FORUM_REQ_REQ_ID.NEXTVAL, SYSDATE, p_requestmessage, p_forumid, user);
INSERT INTO tbl_forum_eventlog VALUES (SEQ_TBL_FORUM_EVNTLOG_EVNT_ID.NEXTVAL,SYSDATE,1,'User ' || user || ' requested access to forum ' || var_forumname || '.', p_forumid,user);
COMMIT;
END IF;
EXCEPTION
WHEN
FORUM_DOESNT_EXIST
THEN RAISE_APPLICATION_ERROR(-20003,'Forum doesnt exist.');
WHEN
FORUM_USER_HAS_ACCESS
THEN RAISE_APPLICATION_ERROR(-20004,'User already have access to this forum.');
WHEN
FORUM_REQUEST_EXIST
THEN RAISE_APPLICATION_ERROR(-20005,'A request to this forum already exist.');
END;
GRANT EXECUTE ON user_forum_requestsaccess TO forum_user;
================================================================================
Regards Goran

you don't have to use execute when you want to execute a procedure (only on sql*plus, you would use it)
just give the name of the funtion
create or replace procedure test
as
begin
    dbms_output.put_line('this is the procedure test');
end test;
create or replace procedure call_test
as
begin
    dbms_output.put_line('this is the procedure call_test going to execute the procedure test');
    test;
end call_test;
begin
    dbms_output.put_line('this is an anonymous block calling the procedure call_test');
    call_test;
end;
/

Procedure with OUT Parameters - Creating A Report

I have the following procedure that is used in our internal (non-APEX) apps:
PROCEDURE SelIssueActivityPublic (
 p_results OUT SYS_REFCURSOR,
 p_IssueID IN ems.issue.issue_id%TYPE,
 p_TransactionID OUT VARCHAR2
 ) The body of the procedure does a bunch of processing, and inserts data into a staging table. The cursor OUT parameter then returns a SELECT statement from the staging table. Since it's possible for this procedure to be hit multiple times (multiple users), the transaction ID is used to match the data in the staging table to the correct request. The procedure then deletes the data from the staging table. (I'll post it if necessary, but it's quite long, and since it's used in other applications successfully, I don't believe it's relevant to my issue.)
I have been asked to create an APEX report of the data generated by the procedure. I've never used a procedure with an OUT parameter to set up a report. I was hoping to assign the transaction ID to a hidden variable on page load, and then using it to poplulate the report. I'm not interested in the cursor OUT parameter, I've written my own SELECT statement to grab data from the staging table.
I tried to create a page computation that did this - item :H_P19_TRANSID, Before Header, computation = EMS.EMS_READER.SelIssueActivityPublic(:H_P19_CURSOR, 454551, :H_P19_TRANSID) [454551 is a test issue id], but I get the following error: ORA-06550: line 1, column 43: PLS-00222: no function with name 'SELISSUEACTIVITYPUBLIC' exists in this scope ORA-06550: line 1, column 7: PL/SQL: Statement ignored flowComp=H_P19_TRANSID
Error ERR-1030 Error executing computation expression. It seems to be thinking that SelIssueActivityPublic is a function, and I'm not sure why.
Basically I need to know how to use this existing procedure to set up my report. Once I can get the transaction ID into a page item, I'll be set.

I never got a chance to finish this report, as I was shuffled to something else with a higher priority. Now that I'm coming back to it, I still have a few issues.
I created a new function that does all the processing (inserting into the staging table etc.), and returns the transaction id. I then tried to set up a page computation on a hidden item to run this function and store the transaction id.
In the computation, if I put
reader.SelIssueActivityPubnocursor(:H_P19_ISSUEID); as the computation, I get ORA-06503: PL/SQL: Function returned without value flowComp=H_P19_TRANSACTIONID as an error. If I put return return reader.SelIssueActivityPubnocursor(:H_P19_ISSUEID); as the computation, I get ORA-06550: line 1, column 50: PLS-00103: Encountered the symbol "EMS" when expecting one of the following: . ( * @ % & = - + ; < / > at in is mod remainder not rem <> or != or ~= >= <= <> and or like like2 like4 likec between || multiset member submultiset The symbol "." was substituted for "EMS" to continue. flowComp=H_P19_TRANSACTIONID as the error. Can someone tell me what's going wrong?

Tuning a procedure and using dbms_job.submit proc that call's functions

Hi
I have Procedure that have 3 curosrs which are nested one below with in each other
and it looks as below
it's structure will look some thing look like this
declare
empno_fetch number;
CURSOR deu_process IS
SELECT empno
FROM emp
WHERE flg_process = 'N'
AND ROWNUM <= 5000
ORDER BY empno;
CURSOR dup_all IS --c1 fetch around 400000 records
(select empno
from emp
where empno>l_empno
order by empno
where rownum<=empno_fetch;
CURSOR rules IS --c2
SELECT rule_id, rule_score, name_Of_func
FROM rule;
begin
l_count := 1;
OPEN dedupe_rule_attr;
LOOP
BEGIN
Here one loop is used for fetching 5000 records at time and
Here deu_process cursor is opened ,assume it fetches one record
Here another cursor dup_all is used for fetching the records and assume it fetched 400000 then
Here another cursor is opened name where it fetches 10 rows
Here logic is if first row then
call's stored function which has following functionalty
it compares fields such as address of outer most cursor i.e deu_process with all the address of the other rows i.e 400000 rows and return a number
if second row then
call's another stored function which has
compares other fields such as first name,last name
if third then other field
so on ....
up to 10
and then finally ends
so if i comment all the rules loop then it takes only one min to execute .If it validaes all of them if takes 14 minutes to execute .so there is problem in that 10 procedures to execute
So i found an approach to run all the rules simultaneously using dbms_job .But i face a problem that i can't uderstand how to send the input and out put parameter's to calling procedure.And these parameter's must be passed by variable from called procedure to calling procedure
Please suggest me what is the syntax of dbms_job with input and output parameters with variable's that must be passed as formal parameter's
Regarding DBMS_JOB.SUBMIT I am getting following error
Declare
x number:=1;
b number;
jobnumber number;
BEGIN
DBMS_JOB.SUBMIT(JOB => jobnumber,
WHAT => 'vamsi_proc1('||x||');',
NEXT_DATE => (sysdate+1/(86400)),
INTERVAL => null);
--dbms_output.put_line('value of b is '||b);
COMMIT;
END;
Declare
ERROR at line 1:
ORA-06550: line 1, column 107:
PLS-00103: Encountered the symbol ")" when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
The symbol "null" was substituted for ")" to continue.
ORA-06512: at "SYS.DBMS_JOB", line 79
ORA-06512: at "SYS.DBMS_JOB", line 136
ORA-06512: at line 5
create or replace procedure vamsi_proc1(v in out number) as
x number(4);
begin
--a:=1;
insert into emp_vamsi(select 677,ENAME,SAL,DEPTNO,MANAGER from emp where empno=v);
commit;
--a:=2;
--x:=a;
end;
using dbms_job.submit proc that call's functions which returns out and in parameters to calling procedure environment .I can't get this with out using data base table's.
If you have any method for this Plese suggest
And also please suggest me weather using job's is a good idea ,If not than suggest me what ever will the other approach.
Thank's and Regard's
vamsi krishna

Hi 
I have looked at all sql trace file , 
I found that there is no problem in sql statemens all of them are using proper indexes execpt the folllowing statement 
 
SELECT nvl(COUNT(ref_appln_no),0) 
FROM ci_cust_dedupe_mast 
WHERE flg_mnt_status='A' 
 
This statement executes only once for 1*3,77000*10 times 
The function that i had sent previously executes more than 4000000*20 times . 
I think all it takes is only for iterations that are caused 
 
I am also sending sql trace for reference
 
TKPROF: Release 9.2.0.4.0 - Production on Mon Aug 14 17:30:50 2006 
 
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved. 
 
Trace file: afhuat_ora_2204.trc 
Sort options: default 
 
******************************************************************************** 
count = number of times OCI procedure was executed 
cpu = cpu time in seconds executing 
elapsed = elapsed time in seconds executing 
disk = number of physical reads of buffers from disk 
query = number of buffers gotten for consistent read 
current = number of buffers gotten in current mode (usually for update) 
rows = number of rows processed by the fetch or execute call 
******************************************************************************** 
 
alter session set sql_trace=true 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 0 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 1 0.00 0.00 0 0 0 0 
 
Misses in library cache during parse: 0 
Misses in library cache during execute: 1 
Optimizer goal: CHOOSE 
Parsing user id: 61 
******************************************************************************** 
 
declare 
x varchar2(100); 
y varchar2(100); 
ap number; 
begin 
x:=to_char(sysdate,'dd-mon-rrrr hh:mi:ss'); 
ap:=ap_ci_dedupe_proc; 
y:=to_char(sysdate,'dd-mon-rrrr hh:mi:ss'); 
dbms_output.put_line(x||' '||ap); 
dbms_output.put_line(y||' '||ap); 
end; 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 820.23 0 0 0 1 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 2 0.00 820.23 0 0 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 
******************************************************************************** 
 
select user# 
from 
sys.user$ where name = 'OUTLN' 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.00 0 2 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.00 0 2 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
1 TABLE ACCESS BY INDEX ROWID USER$ (cr=2 r=0 w=0 time=31 us) 
1 INDEX UNIQUE SCAN I_USER1 (cr=1 r=0 w=0 time=18 us)(object id 44) 
 
******************************************************************************** 
 
SELECT * 
FROM ci_dedupe_rule_attr 
ORDER BY cod_rule_attr_id 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.06 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 21 0.00 0.01 1 3 0 20 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 23 0.00 0.07 1 3 0 20 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT COUNT(1) 
FROM ci_cust_dedupe_mast 
WHERE flg_process = 'N' 
AND 
AND 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.00 0 22 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.00 0 22 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT nvl(COUNT(ref_appln_no),0) 
FROM ci_cust_dedupe_mast 
WHERE flg_mnt_status='A' 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 1.68 3.03 18867 21183 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 1.68 3.03 18867 21183 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT ref_appln_no 
FROM ci_cust_dedupe_mast 
WHERE flg_process = 'N' 
AND 
AND 
AND 
ORDER BY ref_appln_no 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.09 18 43 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 6 0.00 0.09 18 43 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT 
FROM 
WHERE 
AND 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 377709 8.71 7.64 0 0 0 0 
Fetch 377709 18.18 60.19 19802 1510836 0 377709 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 755419 26.90 67.84 19802 1510836 0 377709 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT NVL(MAX(cod_serial_no),0) + 1 
FROM ci_dedupe_details_mast 
WHERE ref_appln_no = :b1 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.01 2 2 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.01 2 2 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT COUNT(1) 
FROM ci_dedupe_details_mast 
WHERE ref_appln_no = :b1 
AND 
AND flg_mnt_status = 'A' 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.00 0 3 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.00 0 3 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT ref_appln_no FROM 
( 
SELECT ref_appln_no 
FROM ci_cust_dedupe_mast 
WHERE 
AND 
ORDER BY ref_appln_no 
) 
WHERE ROWNUM <= :b2 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 77 0.01 0.00 0 0 0 0 
Fetch 377786 10.21 12.33 908 377865 0 377709 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 377864 10.23 12.33 908 377865 0 377709 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
SELECT cod_rule_id, cod_rule_score, nam_rule_func 
FROM ci_dedupe_rule_defn 
WHERE flg_valid = 'Y' 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 377708 5.50 4.03 0 0 0 0 
Fetch 4154788 62.79 54.04 16 4532496 0 3777080 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 4532497 68.29 58.07 16 4532496 0 3777080 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
select con#,obj#,rcon#,enabled,nvl(defer,0) 
from 
cdef$ where robj#=:1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 2 0.00 0.01 1 2 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 6 0.00 0.01 1 2 0 0 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
******************************************************************************** 
 
select con#,type#,condlength,intcols,robj#,rcon#,match#,refact,nvl(enabled,0), 
rowid,cols,nvl(defer,0),mtime,nvl(spare1,0) 
from 
cdef$ where obj#=:1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 2 0.00 0.01 2 4 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 6 0.00 0.01 2 4 0 0 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
******************************************************************************** 
 
select u.name,o.name, t.update$, t.insert$, t.delete$, t.enabled 
from 
obj$ o,user$ u,trigger$ t where t.baseobject=:1 and t.obj#=o.obj# and 
o.owner#=u.user# order by o.obj# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 3 0.00 0.00 0 0 0 0 
Execute 3 0.00 0.00 0 0 0 0 
Fetch 4 0.00 0.05 6 9 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 10 0.00 0.05 6 9 0 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
0 SORT ORDER BY (cr=1 r=1 w=0 time=4772 us) 
0 NESTED LOOPS (cr=1 r=1 w=0 time=4747 us) 
0 NESTED LOOPS (cr=1 r=1 w=0 time=4744 us) 
0 TABLE ACCESS BY INDEX ROWID TRIGGER$ (cr=1 r=1 w=0 time=4740 us) 
0 INDEX RANGE SCAN I_TRIGGER1 (cr=1 r=1 w=0 time=4736 us)(object id 130) 
0 TABLE ACCESS BY INDEX ROWID OBJ$ (cr=0 r=0 w=0 time=0 us) 
0 INDEX UNIQUE SCAN I_OBJ1 (cr=0 r=0 w=0 time=0 us)(object id 36) 
0 TABLE ACCESS CLUSTER USER$ (cr=0 r=0 w=0 time=0 us) 
0 INDEX UNIQUE SCAN I_USER# (cr=0 r=0 w=0 time=0 us)(object id 11) 
 
******************************************************************************** 
 
select o.owner#,o.name,o.namespace,o.remoteowner,o.linkname,o.subname, 
o.dataobj#,o.flags 
from 
obj$ o where o.obj#=:1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 3 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.02 5 9 0 3 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 8 0.00 0.02 5 9 0 3 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 3) 
******************************************************************************** 
 
select col#, grantee#, privilege#,max(mod(nvl(option$,0),2)) 
from 
objauth$ where obj#=:1 and col# is not null group by privilege#, col#, 
grantee# order by col#, grantee# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 3 0.00 0.00 0 0 0 0 
Execute 3 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.01 2 6 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 9 0.00 0.02 2 6 0 0 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
******************************************************************************** 
 
INSERT INTO ci_dedupe_details_mast 
VALUES 
( 
:b6, 
:b5, 
:b4, 
:b3, 
'Y', 
'N', 
'', 
0, 
SYSDATE, 
'A', 
' ', 
:b2, 
'SYSTEM', 
:b1, 
1 
) 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.01 3 3 0 0 
Execute 1 0.00 0.01 4 1 6 1 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 2 0.00 0.02 7 4 6 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
select obj#,type#,ctime,mtime,stime,status,dataobj#,flags,oid$, spare1, 
spare2 
from 
obj$ where owner#=:1 and name=:2 and namespace=:3 and remoteowner is null 
and linkname is null and subname is null 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.01 2 3 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.01 2 3 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
******************************************************************************** 
 
select audit$,options 
from 
procedure$ where obj#=:1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.01 3 3 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.01 3 3 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
1 TABLE ACCESS BY INDEX ROWID PROCEDURE$ (cr=3 r=3 w=0 time=14110 us) 
1 INDEX UNIQUE SCAN I_PROCEDURE1 (cr=2 r=2 w=0 time=13871 us)(object id 115) 
 
******************************************************************************** 
 
select owner#,name,namespace,remoteowner,linkname,p_timestamp,p_obj#, 
d_owner#, nvl(property,0),subname 
from 
dependency$,obj$ where d_obj#=:1 and p_obj#=obj#(+) order by order# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 4 0.00 0.07 8 12 0 3 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 6 0.00 0.07 8 12 0 3 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
3 SORT ORDER BY (cr=12 r=8 w=0 time=72867 us) 
3 NESTED LOOPS OUTER (cr=12 r=8 w=0 time=72813 us) 
3 TABLE ACCESS BY INDEX ROWID DEPENDENCY$ (cr=4 r=4 w=0 time=41297 us) 
3 INDEX RANGE SCAN I_DEPENDENCY1 (cr=3 r=3 w=0 time=25897 us)(object id 127) 
3 TABLE ACCESS BY INDEX ROWID OBJ$ (cr=8 r=4 w=0 time=31484 us) 
3 INDEX UNIQUE SCAN I_OBJ1 (cr=5 r=2 w=0 time=14872 us)(object id 36) 
 
******************************************************************************** 
 
select order#,columns,types 
from 
access$ where d_obj#=:1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 2 0.00 0.02 3 4 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 4 0.00 0.02 3 4 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
1 TABLE ACCESS BY INDEX ROWID ACCESS$ (cr=4 r=3 w=0 time=27026 us) 
1 INDEX RANGE SCAN I_ACCESS1 (cr=3 r=2 w=0 time=21717 us)(object id 129) 
 
******************************************************************************** 
 
select /*+ index(idl_sb4$ i_idl_sb41) +*/ piece#,length,piece 
from 
idl_sb4$ where obj#=:1 and part=:2 and version=:3 order by piece# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.02 3 7 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 7 0.00 0.02 3 7 0 1 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
0 TABLE ACCESS BY INDEX ROWID IDL_SB4$ (cr=2 r=2 w=0 time=19830 us) 
0 INDEX RANGE SCAN I_IDL_SB41 (cr=2 r=2 w=0 time=19826 us)(object id 123) 
 
******************************************************************************** 
 
select /*+ index(idl_ub1$ i_idl_ub11) +*/ piece#,length,piece 
from 
idl_ub1$ where obj#=:1 and part=:2 and version=:3 order by piece# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.03 3 9 0 2 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 7 0.00 0.03 3 9 0 2 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
0 TABLE ACCESS BY INDEX ROWID IDL_UB1$ (cr=2 r=2 w=0 time=21757 us) 
0 INDEX RANGE SCAN I_IDL_UB11 (cr=2 r=2 w=0 time=21753 us)(object id 120) 
 
******************************************************************************** 
 
select /*+ index(idl_char$ i_idl_char1) +*/ piece#,length,piece 
from 
idl_char$ where obj#=:1 and part=:2 and version=:3 order by piece# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 2 0.00 0.01 2 4 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 6 0.00 0.01 2 4 0 0 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
0 TABLE ACCESS BY INDEX ROWID IDL_CHAR$ (cr=2 r=2 w=0 time=19465 us) 
0 INDEX RANGE SCAN I_IDL_CHAR1 (cr=2 r=2 w=0 time=19461 us)(object id 121) 
 
******************************************************************************** 
 
select /*+ index(idl_ub2$ i_idl_ub21) +*/ piece#,length,piece 
from 
idl_ub2$ where obj#=:1 and part=:2 and version=:3 order by piece# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.00 0 0 0 0 
Fetch 2 0.00 0.01 2 4 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 6 0.00 0.01 2 4 0 0 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
0 TABLE ACCESS BY INDEX ROWID IDL_UB2$ (cr=2 r=2 w=0 time=15070 us) 
0 INDEX RANGE SCAN I_IDL_UB21 (cr=2 r=2 w=0 time=15066 us)(object id 122) 
 
******************************************************************************** 
 
select baseobject,type#,update$,insert$,delete$,refnewname,refoldname, 
whenclause,definition,enabled,property,sys_evts,nttrigcol,nttrigatt, 
refprtname,rowid 
from 
trigger$ where obj# =:1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.00 1 2 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.00 1 2 0 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
1 TABLE ACCESS BY INDEX ROWID TRIGGER$ (cr=2 r=1 w=0 time=9352 us) 
1 INDEX UNIQUE SCAN I_TRIGGER2 (cr=1 r=1 w=0 time=9340 us)(object id 131) 
 
******************************************************************************** 
 
select owner# 
from 
obj$ o where obj# = :1 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 1 0.00 0.00 0 3 0 1 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 3 0.00 0.00 0 3 0 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
1 TABLE ACCESS BY INDEX ROWID OBJ$ (cr=3 r=0 w=0 time=15 us) 
1 INDEX UNIQUE SCAN I_OBJ1 (cr=2 r=0 w=0 time=7 us)(object id 36) 
 
******************************************************************************** 
 
select tc.type#,tc.intcol#,tc.position#,c.type#, c.length,c.scale, 
c.precision#,c.charsetid,c.charsetform 
from 
triggercol$ tc,col$ c ,trigger$ tr where tc.obj#=:1 and c.obj#=:2 and 
tc.intcol#=c.intcol# and tr.obj# = tc.obj# and (bitand(tr.property,32) != 
32 or bitand(tc.type#,20) = 20) union select type#,intcol#,position#,69,0,0, 
0,0,0 from triggercol$ where obj#=:3 and intcol#=1001 union select tc.type#, 
tc.intcol#,tc.position#,121,0,0,0,0,0 from triggercol$ tc,trigger$ tr where 
tr.obj# = tc.obj# and bitand(tr.property,32) = 32 and tc.obj# = :4 and 
bitand(tc.type#,20) != 20 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 0 
Fetch 34 0.00 0.05 8 236 0 33 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 36 0.00 0.05 8 236 0 33 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
33 SORT UNIQUE (cr=236 r=8 w=0 time=54877 us) 
33 UNION-ALL (cr=236 r=8 w=0 time=54606 us) 
33 NESTED LOOPS (cr=197 r=8 w=0 time=53779 us) 
33 NESTED LOOPS (cr=162 r=8 w=0 time=53053 us) 
77 TABLE ACCESS CLUSTER COL$ (cr=83 r=6 w=0 time=40045 us) 
1 INDEX UNIQUE SCAN I_OBJ# (cr=2 r=2 w=0 time=13764 us)(object id 3) 
33 INDEX RANGE SCAN I_TRIGGERCOL2 (cr=79 r=2 w=0 time=12523 us)(object id 133) 
33 TABLE ACCESS BY INDEX ROWID TRIGGER$ (cr=35 r=0 w=0 time=466 us) 
33 INDEX UNIQUE SCAN I_TRIGGER2 (cr=2 r=0 w=0 time=152 us)(object id 131) 
0 INDEX RANGE SCAN I_TRIGGERCOL2 (cr=2 r=0 w=0 time=5 us)(object id 133) 
0 NESTED LOOPS (cr=37 r=0 w=0 time=574 us) 
33 INDEX RANGE SCAN I_TRIGGERCOL2 (cr=2 r=0 w=0 time=81 us)(object id 133) 
0 TABLE ACCESS BY INDEX ROWID TRIGGER$ (cr=35 r=0 w=0 time=350 us) 
33 INDEX UNIQUE SCAN I_TRIGGER2 (cr=2 r=0 w=0 time=139 us)(object id 131) 
 
******************************************************************************** 
 
select grantee#,privilege#,nvl(col#,0),max(mod(nvl(option$,0),2)) 
from 
objauth$ where obj#=:1 group by grantee#,privilege#,nvl(col#,0) order by 
grantee# 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 3 0.00 0.00 0 0 0 0 
Execute 3 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.00 0 6 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 9 0.00 0.00 0 6 0 0 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
******************************************************************************** 
 
UPDATE 
SET 
WHERE ref_appln_no = :b1 
AND flg_mnt_status = 'A' 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.16 9 8 17 1 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 2 0.00 0.16 9 8 17 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
select type#,blocks,extents,minexts,maxexts,extsize,extpct,user#,iniexts, 
NVL(lists,65535),NVL(groups,65535),cachehint,hwmincr, NVL(spare1,0) 
from 
seg$ where ts#=:1 and file#=:2 and block#=:3 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 3 0.00 0.00 0 0 0 0 
Execute 3 0.00 0.00 0 0 0 0 
Fetch 3 0.00 0.01 3 9 0 3 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 9 0.00 0.01 3 9 0 3 
 
Misses in library cache during parse: 0 
Optimizer goal: CHOOSE 
Parsing user id: SYS (recursive depth: 2) 
 
Rows Row Source Operation 
------- --------------------------------------------------- 
1 TABLE ACCESS CLUSTER SEG$ (cr=3 r=3 w=0 time=17332 us) 
1 INDEX UNIQUE SCAN I_FILE#_BLOCK# (cr=2 r=2 w=0 time=10258 us)(object id 9) 
 
******************************************************************************** 
 
INSERT INTO ci_dedupe_details 
VALUES 
( 
:b31, 
:b32, 
:b31, 
:b30, 
:b29, 
:b28, 
:b27, 
:b26, 
:b25, 
:b24, 
:b23, 
:b22, 
:b21, 
:b20, 
:b19, 
:b18, 
:b17, 
:b16, 
:b15, 
:b14, 
:b13, 
:b12, 
:b11, 
:b10, 
:b9, 
:b8, 
:b7, 
:b6, 
:b5, 
:b4, 
:b3, 
:b2, 
:b1, 
'N', 
0, 
'E' ) 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.01 0.03 4 1 5 1 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 2 0.01 0.03 4 1 5 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
select /*+ rule */ bucket_cnt, row_cnt, cache_cnt, null_cnt, timestamp#, 
sample_size, minimum, maximum, distcnt, lowval, hival, density, col#, 
spare1, spare2, avgcln 
from 
hist_head$ where obj#=:1 and intcol#=:2 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 36 0.00 0.00 0 0 0 0 
Fetch 36 0.00 0.02 3 108 0 36 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 73 0.00 0.02 3 108 0 36 
 
Misses in library cache during parse: 1 
Optimizer goal: RULE 
Parsing user id: SYS (recursive depth: 2) 
******************************************************************************** 
 
COMMIT 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 2 0.00 0.01 0 0 1 0 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 4 0.00 0.01 0 0 1 0 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: 61 (recursive depth: 1) 
******************************************************************************** 
 
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END; 
 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 1 0.00 0.00 0 0 0 0 
Execute 1 0.00 0.00 0 0 0 1 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 2 0.00 0.00 0 0 0 1 
 
Misses in library cache during parse: 1 
Optimizer goal: CHOOSE 
Parsing user id: 61 
 
 
 
******************************************************************************** 
 
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 2 0.00 0.00 0 0 0 0 
Execute 3 0.00 820.23 0 0 0 2 
Fetch 0 0.00 0.00 0 0 0 0 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 5 0.00 820.23 0 0 0 2 
 
Misses in library cache during parse: 1 
Misses in library cache during execute: 1 
 
 
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS 
 
call count cpu elapsed disk query current rows 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
Parse 49 0.00 0.10 3 3 0 0 
Execute 755577 14.25 11.90 17 10 29 3 
Fetch 4910422 92.89 130.18 39671 6442895 0 4532611 
------- ------ -------- ---------- ---------- ---------- ---------- ---------- 
total 5666048 107.14 142.19 39691 6442908 29 4532614 
 
Misses in library cache during parse: 11 
 
17 user SQL statements in session. 
35 internal SQL statements in session. 
52 SQL statements in session. 
******************************************************************************** 
Trace file: afhuat_ora_2204.trc 
Trace file compatibility: 9.00.01 
Sort options: default 
 
1 session in tracefile. 
17 user SQL statements in trace file. 
35 internal SQL statements in trace file. 
52 SQL statements in trace file. 
36 unique SQL statements in trace file. 
5666466 lines in trace file. 
Regards 
vamsi krishna

Substitute of ADD_JOB_EMAIL_NOTIFICATION procedure

Similar Messages

Maybe you are looking for