Subtotal in ALV without sort technique to maintain heirarchy of records.

Hello Abappers,
In my functionality, i want to perform subtotals of the expenditures of a particular SBU. So in the ALV under each Business Unit, there are various Expense types and under them various SBU's
Heirachy is as follows :
BU - > Expense Type - > SBU
So when i display all this in ALV,
column A is BU
column B is expense types under one BU
column C is SBU's under one expense type
column D is the amount expenditure of SBU
I want a subtotal of amounts spend under one expense type. i.e sum of all SBU expenditure and then total of all expenditure. Total i can get by do_sum in fieldcatalog.
But for the subtotal, i need to use sort criteria, but if i sort entire thing gets sorted and the heirarchy is lost.
Is there any other way of performing subtotal without sorting?
Regards.

hi.
i think before showing the itab in alv , u should also calculate the subtotals in it.and then sort it out and send to alv.

Similar Messages

Subtotal in alv after sort

i have six fields,
   based upon the sorting of all 5 fields, i should get the subtotal for sixth field in the alv list report(i have used func module alv_list_display').
How can I set the sorting sequence in IT_SORT?
and display the sub-total.

Hai
Go through the following Example Code
Refer to this similar thread.
alv Display :Total and subtotal
for sub totals you have to use
sort table.
sort-fieldname = 'VBELN'.
sort-tabname = 'ITAB'.
sort-up = 'X'.
sort-subtot = 'X'.
append sort to it_sort.
Or
Define SORT table and FIELDCATALOG table .
Data :i_field type slis_t_fieldcat_alv,
w_field like line of i_field,
i_sort type slis_t_sortinfo_alv,
w_sort like line of i_sort.
2.Grand Total
While buildingfieldcatalog,We have to set DO_SUM = 'X' for quantity field .
ex.
w_field-fieldname = 'MENGE'.
w_field-tabname = 'I_TAB'.
w_field-DO_SUM = 'X'.
append w_field to i_field.
clear w_field.
3.Subtotal
Whenever WERKS is changed Subtotal is displayed .
Build sort table .
Clear: w_sort,i_sort[].
w_sort-spos = 1.
w_sort-fieldname = 'WERKS'.
w_sort-up = 'X'.
w_sort-subtot = 'X'.
append w_sort to i_sort.
clear w_sort.
4.
Pass this I_SORT table thru REUSE_ALV_LIST_DISPLAY function module ..like fieldcatalog table.
Or
For sub totals you need to sort and pass the sort table to FM.
But for total you need to pass to field catalog like below
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.       "Display column total
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
Thanks & regards
Sreeni

SUBTOTAL IN ALV REPORT

hello freinds,
I am facing problem of subtotal in alv report.
I am explaining my problem.....................
In my report there are 8 columns...
in first colum there is 'Acount Number' field. I have to sort out it.and I have done it succesfully. Now in my seventh and eighth column there are fields 'PAYMENT GROSS AMOUNT' and ' IVA AMOUNT' respectively.
Now I have to do subtotal of these two columns (7th & 8th) according to first column value i.e Acount Number.
Please send me solution.
Thanks in Advance........

Hi,
try this code ,hope usefull to u, please reward point if usefull to u.
*& Report ZALV_SUBTOTAL
This program lists orders (VBAK) with sort and sub-total for *
'sold-to-party' (KUNNR) and 'Sales organization' (VKORG) *
REPORT ZALV_SUBTOTAL.
TABLES : vbak.
TYPE-POOLS: slis. " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg, " Sales organization
s_kunnr FOR vbak-kunnr, " Sold-to party
s_vbeln FOR vbak-vbeln. " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
 vkorg LIKE vbak-vkorg, " Sales organization
 kunnr LIKE vbak-kunnr, " Sold-to party
 vbeln LIKE vbak-vbeln, " Sales document
 netwr LIKE vbak-netwr, " Net Value of the Sales Order
 waerk LIKE vbak-waerk, " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
 Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
 FROM vbak
 UP TO p_max ROWS
 WHERE kunnr IN s_kunnr
 AND vbeln IN s_vbeln
 AND vkorg IN s_vkorg.
ENDFORM. " F_READ_DATA
 Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
 add 1 to ls_fieldcat-col_pos.
 ls_fieldcat-fieldname = &1.
 ls_fieldcat-ref_tabname = 'VBAK'.
 ls_fieldcat-do_sum = &2.
 ls_fieldcat-cfieldname = &3.
 append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
 add 1 to ls_sort-spos.
 ls_sort-fieldname = &1.
 ls_sort-up = 'X'.
 ls_sort-subtot = &2.
 append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
 ls_fieldcat TYPE slis_fieldcat_alv,
 lt_fieldcat TYPE slis_t_fieldcat_alv,
 lt_sort TYPE slis_t_sortinfo_alv,
 ls_sort TYPE slis_sortinfo_alv,
 ls_layout TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'. " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'. " Sort by kunnr and subtotal
m_sort 'VBELN' ''. " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 is_layout = ls_layout
 it_fieldcat = lt_fieldcat
 it_sort = lt_sort
 TABLES
 t_outtab = gt_vbak.
ENDFORM. " F_DISPLAY_DATA
END OF PROGRAM Z_DEMO_ALV_SORT **********************
Regards
fareedas

How to find out the total, subtotal in alv report

hi dears,
how to find out the total, subtotal in alv report?
pls tell me logic ,
i will be waiting for eply
regards
eswar

Hi,
ALV Grid List with sub-totals
REPORT z_demo_alv_sort.
* This program lists orders (VBAK) with sort and sub-total for *
* 'sold-to-party' (KUNNR) and 'Sales organization' (VKORG) *
TABLES : vbak.
TYPE-POOLS: slis. " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg, " Sales organization
s_kunnr FOR vbak-kunnr, " Sold-to party
s_vbeln FOR vbak-vbeln. " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
 vkorg LIKE vbak-vkorg, " Sales organization
 kunnr LIKE vbak-kunnr, " Sold-to party
 vbeln LIKE vbak-vbeln, " Sales document
 netwr LIKE vbak-netwr, " Net Value of the Sales Order
 waerk LIKE vbak-waerk, " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
* Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
 FROM vbak
 UP TO p_max ROWS
 WHERE kunnr IN s_kunnr
 AND vbeln IN s_vbeln
 AND vkorg IN s_vkorg.
ENDFORM. " F_READ_DATA
* Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
 add 1 to ls_fieldcat-col_pos.
 ls_fieldcat-fieldname = &1.
 ls_fieldcat-ref_tabname = 'VBAK'.
 ls_fieldcat-do_sum = &2.
 ls_fieldcat-cfieldname = &3.
 append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
 add 1 to ls_sort-spos.
 ls_sort-fieldname = &1.
 ls_sort-up = 'X'.
 ls_sort-subtot = &2.
 append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
 ls_fieldcat TYPE slis_fieldcat_alv,
 lt_fieldcat TYPE slis_t_fieldcat_alv,
 lt_sort TYPE slis_t_sortinfo_alv,
 ls_sort TYPE slis_sortinfo_alv,
 ls_layout TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'. " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'. " Sort by kunnr and subtotal
m_sort 'VBELN' ''. " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 is_layout = ls_layout
 it_fieldcat = lt_fieldcat
 it_sort = lt_sort
 TABLES
 t_outtab = gt_vbak.
ENDFORM. " F_DISPLAY_DATA
***************** END OF PROGRAM Z_DEMO_ALV_SORT **********************
Regards
Sudheer

Percentage Total/Subtotal in ALV Grid

Dear All,
I have to display an ALV report with percentage feilds. Everything is fine but the problem arises when the standard ALV sum functionality is used. It simply adds up all the percentage columns. Making do_sum = 'C' wont help either as it would simple give an average of all the percentage. My requirement is to show them through calculation. I have searched the web and saw some solutions with SUBTOTAL_TEXT nad some with OOP programming but i am not able to get this. Can anybody please help.
<REMOVED BY MODERATOR>
Thanks
MV
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 4:24 PM

hi manish,
try this program.
ALV Grid List with sub-totals
REPORT z_demo_alv_sort.
* This program lists orders (VBAK) with sort and sub-total for *
* 'sold-to-party' (KUNNR) and 'Sales organization' (VKORG) *
TABLES : vbak.
TYPE-POOLS: slis. " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg, " Sales organization
s_kunnr FOR vbak-kunnr, " Sold-to party
s_vbeln FOR vbak-vbeln. " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
 vkorg LIKE vbak-vkorg, " Sales organization
 kunnr LIKE vbak-kunnr, " Sold-to party
 vbeln LIKE vbak-vbeln, " Sales document
 netwr LIKE vbak-netwr, " Net Value of the Sales Order
 waerk LIKE vbak-waerk, " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
* Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
 FROM vbak
 UP TO p_max ROWS
 WHERE kunnr IN s_kunnr
 AND vbeln IN s_vbeln
 AND vkorg IN s_vkorg.
ENDFORM. " F_READ_DATA
* Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
 add 1 to ls_fieldcat-col_pos.
 ls_fieldcat-fieldname = &1.
 ls_fieldcat-ref_tabname = 'VBAK'.
 ls_fieldcat-do_sum = &2.
 ls_fieldcat-cfieldname = &3.
 append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
 add 1 to ls_sort-spos.
 ls_sort-fieldname = &1.
 ls_sort-up = 'X'.
 ls_sort-subtot = &2.
 append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
 ls_fieldcat TYPE slis_fieldcat_alv,
 lt_fieldcat TYPE slis_t_fieldcat_alv,
 lt_sort TYPE slis_t_sortinfo_alv,
 ls_sort TYPE slis_sortinfo_alv,
 ls_layout TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'. " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'. " Sort by kunnr and subtotal
m_sort 'VBELN' ''. " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 is_layout = ls_layout
 it_fieldcat = lt_fieldcat
 it_sort = lt_sort
 TABLES
 t_outtab = gt_vbak.
ENDFORM. " F_DISPLAY_DATA
***************** END OF PROGRAM Z_DEMO_ALV_SORT **********************
thanks
karthik
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 4:50 PM

Problem in Subtotal in ALV

Hi Experts,
I wanted to do the subtotal in ALV report. For subtotal which data type we need to take. Is it really affect with data type??
My problem is: I wanted to do the subtotal based on Purchase order number. I need to do the subtotal of field LV_VAR based on purchase order number. The field LV_VAR having TYPE packed decimal.
Do I need to change the data type of field LV_VAR for getting subtotal?
For implementing the Subtotal functionality in my alv report, I did following changes
1. Declared one sort catalog as
gs_sort-fieldname = 'EBELN'.
gs_sort-up = 'X'.
gs-sort-subtot = 'X'.
append gs_sort to gt_sort.
2. In fieldcatalog of field LV_VAR
i_fieldcatalog-fieldname = 'LV_VAR'.
i_fieldcatalog-tabname = 'ITAB'.
i_fieldcatalog-do_sum = 'X'.
append i_fieldcatalog.
Then in FM REUSE_ALV_GRID_DISPLAY, I had passed sort catalog as
it_sort = gt_sort[]
But I did not get the subtotal functionality.
Any suggestion pls?

Hi ,
I will give you one sample code which has a functionality of subtotal and grand total also .
And this code will help you in many aspects also.
*& Report ZSAND_SUBTOTAL *
REPORT ZSAND_SUBTOTAL LINE-COUNT 65 .
*& Report ZALV_LIST
TABLES : mseg.
TYPE-POOLS : slis.
DATA : BEGIN OF itab OCCURS 0,
 mblnr LIKE mseg-mblnr,
 matnr LIKE mseg-matnr,
 werks LIKE mseg-werks,
 menge LIKE mseg-menge,
 line_color(4) TYPE c,
 END OF itab.
DATA : BEGIN OF itab1 OCCURS 0,
 mblnr LIKE mseg-mblnr,
 matnr LIKE mseg-matnr,
 werks LIKE mseg-werks,
 menge LIKE mseg-menge,
 line_color(4) TYPE c,
 END OF itab1.
data: it_sortcat type slis_sortinfo_alv occurs 1,
 wa_sort like line of it_sortcat.
DATA: it_header TYPE slis_t_listheader,
 wa_header TYPE slis_listheader.
data: var1(1).
DATA var2.
data:mytabix like sy-tabix.
data:wtab1 like line of itab,
 wtab2 like line of itab.
DATA : t_fcat TYPE slis_t_fieldcat_alv,
t_eve TYPE slis_t_event,
t_subtot TYPE slis_t_sortinfo_alv,
subtot LIKE LINE OF t_subtot,
wa_fcat LIKE LINE OF t_fcat,
gd_layout TYPE slis_layout_alv.
DATA : gt_menge LIKE mseg-menge,
st_menge LIKE mseg-menge.
data:it_extab type SLIS_t_EXTAB,
 wa_extab like line of it_extab.
SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : doc FOR mseg-mblnr.
SELECTION-SCREEN : END OF BLOCK blk1.
START-OF-SELECTION.
PERFORM build_cat USING t_fcat.
PERFORM build_layout.
PERFORM build_eve.
perform fill_sort.
PERFORM get_data.
PERFORM display.
*& Form build_cat
*text
*-->TEMP_FCAT text
FORM build_cat USING temp_fcat TYPE slis_t_fieldcat_alv.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MBLNR'.
wa_fcat-seltext_m = 'Material Doc.'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-seltext_m = 'Material'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'WERKS'.
wa_fcat-seltext_m = 'Plant'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MENGE'.
wa_fcat-seltext_m = 'Quantity'.
wa_fcat-do_sum = 'Y'.
APPEND wa_fcat TO temp_fcat.
CLEAR wa_fcat.
ENDFORM. "build_cat
*& Form build_eve
*text
FORM build_eve.
DATA : wa_eve TYPE slis_alv_event.
data:mytabix type sy-tabix.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = t_eve
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc <> 0.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE t_eve into wa_eve WITH KEY name = slis_ev_top_of_page.
*INTO wa_eve.
IF sy-subrc = 0.
mytabix = sy-tabix.
MOVE 'TOP_OF_PAGE' TO wa_eve-form.
append wa_eve to t_eve.
*modify t_eve from wa_eve index mytabix transporting form.
ENDIF.
READ TABLE t_eve into wa_eve WITH KEY name = slis_ev_end_of_page.
*INTO wa_eve.
IF sy-subrc = 0.
mytabix = sy-tabix.
MOVE 'END_OF_PAGE' TO wa_eve-form.
append wa_eve to t_eve.
*modify t_eve from wa_eve index mytabix transporting form.
ENDIF.
ENDFORM. "build_eve
*& Form build_layout
*text
FORM build_layout.
*gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-info_fieldname = 'LINE_COLOR'.
gd_layout-subtotals_text = 'SUBTOTAL'.
*gd_layout-totals_text = 'TOTAL'.
gd_layout-EDIT = 'X'.
ENDFORM. " BUILD_LAYOUT
*& Form get_data
*text
FORM get_data.
SELECT mblnr matnr werks menge FROM mseg INTO CORRESPONDING FIELDS OF
TABLE itab
WHERE mblnr IN doc.
SORT itab BY mblnr.
sort itab by mblnr matnr.
read table itab into wtab1 index 1.
mytabix = 1.
loop at itab into wtab2 from 2.
if wtab1-mblnr = wtab2-mblnr and wtab1-matnr = wtab2-matnr.
wtab1-menge = wtab1-menge + wtab2-menge.
modify itab from wtab1 index mytabix.
else.
modify itab from wtab1 index mytabix.
clear wtab1.
mytabix = sy-tabix.
move wtab2 to wtab1.
endif.
clear wtab2.
endloop.
delete ADJACENT DUPLICATES from itab comparing mblnr matnr.
ENDFORM. "get_data
*& Form display
*text
FORM display.
wa_extab-fcode = '&ETA'.
append wa_extab to it_extab.
wa_header-typ = 'H'.
 wa_header-info = 'SANDY is Great'.
 append wa_header to it_header.
 clear wa_header.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = 'ZSAND_SUBTOTAL'
I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = 'USERCOMMAND'
 I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
 IS_LAYOUT = gd_layout
 IT_FIELDCAT = t_fcat
 IT_EXCLUDING = it_extab
IT_SPECIAL_GROUPS =
 IT_SORT = it_sortcat
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
 IT_EVENTS = t_eve[]
IT_EVENT_EXIT = 'BUILD_EVE'
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display
***& Form top_of_page
*text
FORM top_of_page.
if var1 is initial.
wa_header-typ = 'H'.
 wa_header-info = 'SANDY is Great'.
 append wa_header to it_header.
 clear wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
 IT_LIST_COMMENTARY = it_header
 I_LOGO = 'HR_LOGO'
I_END_OF_LIST_GRID =
 var1 = 'X'.
endif.
ENDFORM. "top_of_page
FORM end_of_page.
if var2 is initial.
wa_header-typ = 'H'.
 wa_header-info = 'SANDY is Great'.
 append wa_header to it_header.
 clear wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
 IT_LIST_COMMENTARY = it_header
 I_LOGO = 'HR_LOGO'
I_END_OF_LIST_GRID =
 var2 = 'X'.
endif.
ENDFORM. "top_of_page
*& Form fill_sort
 text
--> p1 text
<-- p2 text
form fill_sort .
wa_sort-spos = 1.
wa_sort-fieldname = 'MBLNR'.
wa_sort-SUBTOT = 'X'. "subtotals any totals column by this field
gd_sortcat-tabname
APPEND wa_sort TO it_sortcat.
wa_sort-spos = 2.
wa_sort-fieldname = 'MATNR'.
gd_sortcat-tabname
APPEND wa_sort TO it_sortcat.
endform. " fill_sort
FORM status USING rt_extab TYPE slis_t_extab.
set pf-status 'ZSTANDARD'.
endform.
form USERCOMMAND USING R_UCOMM type sy-ucomm
 rselfield type slis_selfield .
set parameter id 'MAT' field rselfield-value .
call transaction 'MM03' and skip first screen.
endform.
I hope this program will help you out.
Help children of U.N World Food Program by rewarding points and encourage others to answer your queries.

Adding row after subtotal in ALV

Hi Guys,
can we add one row after the subtotal in ALV.
Like the below...
field1 field2 field3 field4
Sub total. 120 121 125 130
Test 150
can you help me about the above...
Thanks,
Lingesh

Hi
If you use GROUPLEVEL_CHANGE you have to creare a form like this:
FORM GROUPLEVEL_CHANGE
 USING P_LINEINFO TYPE SLIS_LINEINFO
 LS_GROUPS TYPE KKBLO_GROUPLEVELS.
ENDFORM. "GROUPLEVEL_CHANGE
In the P_LINEINFO you have details of row and in the LS_GROUPS details of level of sorting.
For example I used it to re-write subtotal:
FORM GROUPLEVEL_CHANGE USING P_LINEINFO TYPE SLIS_LINEINFO
 LS_GROUPS TYPE KKBLO_GROUPLEVELS.
PERFORM WRITE_SUB_TOTAL USING LS_GROUPS.
ENDFORM. "GROUPLEVEL_CHANGE
FORM WRITE_SUB_TOTAL USING P_GROUPS TYPE KKBLO_GROUPLEVELS.
DATA: TOT_SALDO_A LIKE BSID-DMBTR,
 TOT_FATTURATO_A LIKE BSID-DMBTR,
 TOT_DSO_A LIKE BSID-DMBTR.
DATA: WA_GROUP TYPE KKBLO_GROUPLEVELS.
DATA: RUN_LEVEL TYPE I.
DATA: BEGIN OF T_LEVEL OCCURS 1,
 LEVEL TYPE I,
 INDEX_FROM TYPE I,
 INDEX_TO TYPE I,
 END OF T_LEVEL.
T_LEVEL-LEVEL = P_GROUPS-LEVEL.
T_LEVEL-INDEX_FROM = P_GROUPS-INDEX_FROM.
T_LEVEL-INDEX_TO = P_GROUPS-INDEX_TO.
APPEND T_LEVEL.
Check livel:
CALL FUNCTION 'ALV_GROUPLEVELS_GET'
 IMPORTING
 ET_GROUPS = GT_GROUP
 TABLES
 T_OUTTAB = <FS_OUTPUT>.
RUN_LEVEL = P_GROUPS-LEVEL + 1.
IF RUN_LEVEL <= LEVEL.
 DO.
 LOOP AT GT_GROUP INTO WA_GROUP
 WHERE INDEX_FROM => P_GROUPS-INDEX_FROM
 AND INDEX_TO <= P_GROUPS-INDEX_TO
 AND LEVEL = RUN_LEVEL.
 T_LEVEL-LEVEL = RUN_LEVEL.
 T_LEVEL-INDEX_FROM = WA_GROUP-INDEX_FROM.
 T_LEVEL-INDEX_TO = WA_GROUP-INDEX_TO.
 ENDLOOP.
 IF SY-SUBRC = 0.
 APPEND T_LEVEL.
 ENDIF.
 RUN_LEVEL = RUN_LEVEL + 1.
 IF RUN_LEVEL > LEVEL. EXIT. ENDIF.
 ENDDO.
ENDIF.
SORT T_LEVEL BY LEVEL DESCENDING.
LOOP AT T_LEVEL.
 TOT_SALDO_A = TOT_FATTURATO_A = 0.
 LOOP AT <FS_OUTPUT> INTO <FS_WA_OUT>
 FROM T_LEVEL-INDEX_FROM
 TO T_LEVEL-INDEX_TO.
 ASSIGN COMPONENT 'ZSALDO'
 OF STRUCTURE <FS_WA_OUT> TO <FS_SALDO>.
 ASSIGN COMPONENT 'ZFATTURATO'
 OF STRUCTURE <FS_WA_OUT> TO <FS_FATTURATO>.
 TOT_SALDO_A = TOT_SALDO_A + <FS_SALDO>.
 TOT_FATTURATO_A = TOT_FATTURATO_A + <FS_FATTURATO>.
 ENDLOOP.
 TOT_SALDO = TOT_SALDO + TOT_SALDO_A .
 TOT_FATTURATO = TOT_FATTURATO + TOT_FATTURATO_A.
 PERFORM CALCULATE_DSO USING TOT_FATTURATO_A
 TOT_SALDO_A TOT_DSO_A.
 PERFORM WRITE_TOT_DSO
 USING TOT_SALDO_A
 TOT_FATTURATO_A TOT_DSO_A
 T_LEVEL-LEVEL T_LEVEL-INDEX_FROM.
ENDLOOP.
ENDFORM. " WRITE_SUB_TOTAL
Max

How to use subtotal in ALV report

hi all,
I need to find subtotal say for Event_ID(type numc) and this should come in the ALV grid intial screen itself.
I have coded like
gs_sort1-spos       = '1'.
gs_sort1-fieldname = 'EVENT_ID'.
gs_sort1-up         = 'X'.
gs_sort1-subtot     = 'X'.
APPEND gs_sort1 TO gt_sort1.
and declare gt_sort1 in FM' REUSE_ALV_GRID_DISPLAY'.. but I am not getting the subtotal in the ALV screen
points will be rewarded
thanks in advance
it is urgent

Hi Jayasree,
Plerase check this program
REPORT z_demo_alv_sort.
* This program lists orders (VBAK) with sort and sub-total for        *
* 'sold-to-party' (KUNNR) and 'Sales organization' (VKORG)            *
TABLES : vbak.
TYPE-POOLS: slis.                      " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg,              " Sales organization
s_kunnr FOR vbak-kunnr,              " Sold-to party
s_vbeln FOR vbak-vbeln.              " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
    vkorg LIKE vbak-vkorg,             " Sales organization
    kunnr LIKE vbak-kunnr,             " Sold-to party
    vbeln LIKE vbak-vbeln,             " Sales document
    netwr LIKE vbak-netwr,             " Net Value of the Sales Order
    waerk LIKE vbak-waerk,             " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
*      Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
           FROM vbak
             UP TO p_max ROWS
          WHERE kunnr IN s_kunnr
            AND vbeln IN s_vbeln
            AND vkorg IN s_vkorg.
ENDFORM.                               " F_READ_DATA
*      Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
    add 1 to ls_fieldcat-col_pos.
    ls_fieldcat-fieldname   = &1.
    ls_fieldcat-ref_tabname = 'VBAK'.
    ls_fieldcat-do_sum      = &2.
    ls_fieldcat-cfieldname = &3.
    append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
    add 1 to ls_sort-spos.
    ls_sort-fieldname = &1.
    ls_sort-up        = 'X'.
    ls_sort-subtot    = &2.
    append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
    ls_fieldcat TYPE slis_fieldcat_alv,
    lt_fieldcat TYPE slis_t_fieldcat_alv,
    lt_sort     TYPE slis_t_sortinfo_alv,
    ls_sort     TYPE slis_sortinfo_alv,
    ls_layout   TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'.                  " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'.                  " Sort by kunnr and subtotal
m_sort 'VBELN' ''.                   " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            is_layout   = ls_layout
            it_fieldcat = lt_fieldcat
            it_sort     = lt_sort
       TABLES
            t_outtab    = gt_vbak.
ENDFORM.                               " F_DISPLAY_DATA
Hope this helps...
Best regards,
raam

How to do subtotal in alv?

Hi,
I have a problem to do the subtotal in alv.
The outlook of alv now is as following:
Specimen Adversary Amount
ZZZ 300100089 1050
ZZZ 300100089 -1050
90256243 300100000 193410
90256242 300100000 173250
90256241 300100000 173250
90256240 300100000 173250
90256239 300100000 173250
90256238 300100000 173250
90256237 300100000 173250
What I need to do it to sum up the amount for same "ADVERSARY"
The out-come image should be
Specimen Adversary Amount
ZZZ 300100089 1050
ZZZ 300100089 -1050
subtotal 0
90256243 300100000 193410
90256242 300100000 173250
90256241 300100000 173250
90256240 300100000 173250
90256239 300100000 173250
90256238 300100000 173250
90256237 300100000 173250
subtotal 1232910
Question:
How can I add the subtotal in alv?
Please help!!
The following is the original coding:
END-OF-SELECTION.
SORT t.
LOOP AT t.
AT NEW bukrs.
CLEAR anz_dl.
CLEAR htext-anzahl.
CLEAR htext-datei.
htext-text1 = ' records writen in file '.
CLEAR p_pfad.
CONCATENATE
i_pfad
'CU_CC'
t-bukrs
sy-datum+6(2)
sy-datum+4(2)
sy-datum(4)
sy-uzeit
'.txt'
INTO p_pfad.
CLEAR outtab.
REFRESH outtab.
REFRESH: gt_outalv. "INS MG020207
ENDAT.
IF t-shkzg = 'H'.
h_betrg = t-wrbtr * -1.
ELSE.
h_betrg = t-wrbtr.
h_dmbtr = t-dmbtr.
ENDIF.
s-filler1 = s-filler2 = s-filler3 = s-filler4 = s-filler5 = ';'.
s-filler6 = s-filler7 = s-filler8 = ';'.
s-filler9 = s-filler10 = s-filler11 = s-filler12 = s-filler13 = ';'.
s-filler14 = ';'.
s-belnr = t-belnr.
IF t-xblnr NE space. "WD041005a
s-xblnr = t-xblnr. "WD041005a
ELSE. "WD041005a
s-xblnr = t-belnr. "WD041005a
ENDIF. "WD041005a
WHILE s-xblnr(1) EQ '0'. "INS MG130606
SHIFT s-xblnr LEFT. "INS MG130606
ENDWHILE. "INS MG130606
WRITE t-kunnr TO s-kunnr NO-ZERO.
s-lifn2 = s-kunnr.
shift s-lifn2 RIGHT.
s-lifn2(1) = 'R'.
S-KUNNR = T-KUNNR+5(5).
s-bldat+2(1) = '/'.
s-bldat+5(1) = '/'.
s-bldat0(2) = t-bldat4(2).
s-bldat3(2) = t-bldat6(2).
s-bldat6(4) = t-bldat0(4).
s-budat+2(1) = '/'.
s-budat+5(1) = '/'.
s-budat0(2) = t-budat4(2).
s-budat3(2) = t-budat6(2).
s-budat6(4) = t-budat0(4).
s-netdt+2(1) = '/'.
s-netdt+5(1) = '/'.
s-netdt0(2) = t-netdt4(2).
s-netdt3(2) = t-netdt6(2).
s-netdt6(4) = t-netdt0(4).
s-waers = t-waers.
s-dmbtr = t-dmbtr.
s-sgtxt = t-sgtxt.
CLEAR s-twaer.
SELECT SINGLE waers INTO s-twaer
FROM t001
WHERE bukrs = t-bukrs.
IF h_betrg < 0.
hs_betrg+0(1) = '-'.
ELSE.
hs_betrg+0(1) = ' '.
ENDIF.
WRITE h_betrg CURRENCY t-waers TO hs_betrg+1 NO-GROUPING
NO-SIGN
LEFT-JUSTIFIED.
REPLACE ',' WITH '.' INTO hs_betrg.
WRITE hs_betrg TO s-betrg.
IF h_dmbtr < 0.
hs_betrg+0(1) = '-'.
ELSE.
hs_betrg+0(1) = ' '.
ENDIF.
WRITE h_dmbtr CURRENCY t-waers TO hs_betrg+1 NO-GROUPING
NO-SIGN
LEFT-JUSTIFIED.
REPLACE ',' WITH '.' INTO hs_betrg.
WRITE hs_betrg TO s-dmbtr.
s-compcode = t-bukrs. "fw070905
IF p_downl = 'X'.
MOVE s TO outtab-s.
APPEND outtab.
ADD 1 TO anz_dl.
ENDIF.
gs_outalv-belnr = s-belnr. "INS MG020207
*<<<< CR01 START ADD as_outalv-zuonr
gs_outalv-zuonr = s-zuonr. "CR01
*>>>> CR01 EDD ADD as_outalv-zuonr
gs_outalv-kunnr = s-kunnr. "INS MG020207
gs_outalv-bldat = s-bldat. "INS MG020207
gs_outalv-netdt = s-netdt. "INS MG020207
gs_outalv-betrg = s-betrg. "INS MG020207
gs_outalv-waers = s-waers. "INS MG020207
gs_outalv-compcode = s-compcode. "INS MG020207
gs_outalv-budat = s-budat. "INS MG020207
gs_outalv-sgtxt = s-sgtxt.
gs_outalv-kmmnt = s-kmmnt.
gs_outalv-vbeln = s-vbeln.
gs_outalv-xblnr = s-xblnr.
gs_outalv-lifn2 = s-lifn2.
gs_outalv-dmbtr = s-dmbtr.
gs_outalv-twaer = s-twaer.
APPEND gs_outalv TO gt_outalv. "INS MG020207
AT END OF bukrs.
WRITE anz_dl TO htext-anzahl.
WRITE p_pfad TO htext-datei.
CONDENSE htext.
IF p_downl = 'X'.
SKIP 2.
WRITE: / htext.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = p_pfad
filetype = 'ASC'
TABLES
data_tab = outtab
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc 0.
write: / 'Error creating File:', P_Pfad, sy-subrc.
MESSAGE e405 WITH text-002 p_pfad.
ENDIF.
ENDIF.
*<<<<< INS MG020207
IF p_alvd EQ 'X'.
PERFORM build_layout_data.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = 'GT_OUTALV'
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
i_callback_top_of_page = 'TOP-OF-PAGE'
TABLES
t_outtab = gt_outalv.
ENDIF.
*>>>>> INS MG020207
ENDAT.
ENDLOOP.

Check this code....it will help you...reward if useful.
REPORT ZPP473_VEHICLE_REVERSAL_REP NO STANDARD PAGE HEADING
 MESSAGE-ID ZPP.
TABLES:ZPP18_RT_CORR.
TYPE-POOLS:SLIS.
DATA:BEGIN OF WA_VEH_REV,
VEHNO TYPE ZPP18_RT_CORR-VEHNO,
MATNR TYPE ZPP18_RT_CORR-MATNR,
WERKS TYPE ZPP18_RT_CORR-WERKS,
MDV01 TYPE ZPP18_RT_CORR-MDV01,
ENGNO TYPE ZPP18_RT_CORR-ENGNO,
FRMNO TYPE ZPP18_RT_CORR-FRMNO,
ERFMG TYPE ZPP18_RT_CORR-ERFMG,
SHIFT TYPE ZPP18_RT_CORR-SHIFT,
ZUNAME TYPE ZPP18_RT_CORR-ZUNAME,
ZDATE TYPE ZPP18_RT_CORR-ZDATE,
MAKTX TYPE MAKT-MAKTX,
ZREASON_DES TYPE ZPP17_REASON_COD-ZREASON_DES,
*VTEXT TYPE T179T-VTEXT,
END OF WA_VEH_REV.
DATA:IT_VEH_REV LIKE STANDARD TABLE OF WA_VEH_REV.
DATA: ALVFLD TYPE SLIS_FIELDCAT_ALV,
 FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: WK_LAYOUT TYPE SLIS_LAYOUT_ALV,
 I_SORT TYPE SLIS_T_SORTINFO_ALV,
 W_SORT LIKE LINE OF I_SORT.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
SO_ZDATE FOR ZPP18_RT_CORR-ZDATE OBLIGATORY,
SO_WERKS FOR ZPP18_RT_CORR-WERKS,
SO_SHIFT FOR ZPP18_RT_CORR-SHIFT,
SO_MDV01 FOR ZPP18_RT_CORR-MDV01,
SO_MATNR FOR ZPP18_RT_CORR-MATNR,
SO_VEHNO FOR ZPP18_RT_CORR-VEHNO,
SO_ENGNO FOR ZPP18_RT_CORR-ENGNO,
SO_FRMNO FOR ZPP18_RT_CORR-FRMNO,
SO_UNAME FOR ZPP18_RT_CORR-ZUNAME.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
**GET REVERSAL,MATERIAL DESCRIPTIONS, REASON DESCRIPTIONS
SELECT ZPP18_RT_CORR~VEHNO
 ZPP18_RT_CORR~MATNR
 ZPP18_RT_CORR~WERKS
 ZPP18_RT_CORR~MDV01
 ZPP18_RT_CORR~ENGNO
 ZPP18_RT_CORR~FRMNO
 ZPP18_RT_CORR~ERFMG
 ZPP18_RT_CORR~SHIFT
 ZPP18_RT_CORR~ZUNAME
 ZPP18_RT_CORR~ZDATE
 MAKT~MAKTX
 ZPP17_REASON_COD~ZREASON_DES
INTO TABLE IT_VEH_REV FROM
ZPP18_RT_CORR INNER JOIN MAKT
ON ( ZPP18_RT_CORRMANDT = MAKTMANDT AND
ZPP18_RT_CORRMATNR = MAKTMATNR )
INNER JOIN ZPP17_REASON_COD
ON ( ZPP18_RT_CORRMANDT = ZPP17_REASON_CODMANDT AND
ZPP18_RT_CORRZREASON = ZPP17_REASON_CODZREASON )
CLIENT SPECIFIED
WHERE ZPP18_RT_CORR~MANDT = SY-MANDT
AND ZPP18_RT_CORR~ZDATE IN SO_ZDATE
AND ZPP18_RT_CORR~WERKS IN SO_WERKS
AND ZPP18_RT_CORR~SHIFT IN SO_SHIFT
AND ZPP18_RT_CORR~MATNR IN SO_MATNR
AND ZPP18_RT_CORR~MDV01 IN SO_MDV01
AND ZPP18_RT_CORR~VEHNO IN SO_VEHNO
AND ZPP18_RT_CORR~ENGNO IN SO_ENGNO
AND ZPP18_RT_CORR~FRMNO IN SO_FRMNO
AND ZPP18_RT_CORR~ZUNAME IN SO_UNAME
AND MAKT~SPRAS = SY-LANGU.
IF SY-SUBRC = 0.
 SORT IT_VEH_REV ASCENDING BY ZDATE SHIFT WERKS MDV01 MATNR.
ELSE.
 MESSAGE I961 WITH 'No Data Found...Try Again !!!'.
 STOP.
ENDIF.
**BUILD ALV DISPLAY.
DEFINE ALV_MACRO.
 ALVFLD-FIELDNAME = &1.
 ALVFLD-SELTEXT_M = &2.
 ALVFLD-COL_POS = &3.
 IF &1 = 'ERFMG'.
 ALVFLD-DO_SUM = 'X'.
 ENDIF.
 APPEND ALVFLD TO FIELDCAT.
 CLEAR ALVFLD.
END-OF-DEFINITION.
REFRESH FIELDCAT.
WK_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
ALV_MACRO 'ZDATE' 'Rev.Date' '1'.
ALV_MACRO 'SHIFT' 'Shift' '2'.
ALV_MACRO 'WERKS' 'Plant' '3'.
ALV_MACRO 'MDV01' 'Conveyor' '4'.
ALV_MACRO 'MATNR' 'Material.No' '5'.
ALV_MACRO 'MAKTX' 'Description' '6'.
ALV_MACRO 'VEHNO' 'Veh.No' '7'.
ALV_MACRO 'ENGNO' 'Eng.No' '8'.
ALV_MACRO 'FRMNO' 'Frame.No' '9'.
ALV_MACRO 'ERFMG' 'Qty' '10'. <----Do Sum Here
ALV_MACRO 'ZREASON_DES' 'Reason' '11'.
ALV_MACRO 'ZUNAME' 'User.Reversed' '12'.
REFRESH I_SORT.
W_SORT-SPOS = 1.
W_SORT-FIELDNAME = 'ZDATE'.
W_SORT-UP = 'X'.
APPEND W_SORT TO I_SORT.
CLEAR W_SORT.
W_SORT-SPOS = 6.
W_SORT-FIELDNAME = 'MAKTX'.
W_SORT-UP = 'X'.
W_SORT-SUBTOT = 'X'.
APPEND W_SORT TO I_SORT.
CLEAR W_SORT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_GRID_TITLE = 'Vehicle Reversal Report'
 IS_LAYOUT = WK_LAYOUT
 IT_FIELDCAT = FIELDCAT[]
 IT_SORT = I_SORT[]
 TABLES
 T_OUTTAB = IT_VEH_REV[]
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END-OF-SELECTION.

Subtotaling in ALV(urgent)

Hi experts,
can anyone tell how to achieve the subtotaling in ALV'S.any pseudo code .points will be awarded.
Regards,
nagaraj

Hello Nagaraj,
In the sort table use:
REFRESH IT_SORT.
CLEAR: G_S_SORT,G_S_SORT.
G_S_SORT-SPOS = 1.
G_S_SORT-FIELDNAME = 'EBELN'.
G_S_SORT-UP = 'X'.
G_S_SORT-DOWN = ' '.
 G_S_SORT-SUBTOT = 'X'.
G_S_SORT-EXPA = ' '.
APPEND G_S_SORT TO IT_SORT.
If useful reward.
Vasanth

ALV Total and Subtotal in ALV

Hi,
I want to display the Total and Subtotal in Alv in Webdynpro Abap, and i am getting this Error( Access via 'NULL' object reference not possible) and also i have checked the Cardinality also. Please get me a Good Solution.

I think your node( the node which is binded to data node of alv interface controller ) having collection cardinality of 1:1, if yes, then change it to 0:N,
i hope this will solve the issue.
If you still get the error, go to st22, open your error, go down that page (keep pressing pagedown button ), then you will find your code and there find this arrow >>>>> then let me know that code line.
Regards
Srinivas

ALV without colors

Hi All,
Is it possible to display ALV without colors ?
If yes pls help me....
Dilip

Hi Dilip,
Try this code,
REPORT ZTEST.
TYPE-POOLS : SLIS.
DATA: BEGIN OF IT_VBAK OCCURS 0,
 VBELN LIKE VBAK-VBELN,
 ERDAT LIKE VBAK-ERDAT,
 END OF IT_VBAK.
DATA : FLD_CAT TYPE SLIS_T_FIELDCAT_ALV,
FLD TYPE SLIS_FIELDCAT_ALV .
DATA:V_REPID LIKE SY-REPID.
START-OF-SELECTION.
V_REPID = SY-REPID.
SELECT VBELN ERDAT FROM VBAK INTO TABLE IT_VBAK.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 I_PROGRAM_NAME = V_REPID
 I_INTERNAL_TABNAME = 'IT_VBAK'
 I_STRUCTURE_NAME =
 I_INCLNAME = V_REPID
 CHANGING
 CT_FIELDCAT = FLD_CAT
 EXCEPTIONS
 INCONSISTENT_INTERFACE = 1
 PROGRAM_ERROR = 2
 OTHERS = 3 .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT FLD_CAT INTO FLD.
 CASE FLD-FIELDNAME.
 WHEN 'VBELN'.
 FLD-KEY = ' '.
 MODIFY FLD_CAT FROM FLD.
 ENDCASE.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = V_REPID
 IT_FIELDCAT = FLD_CAT
 TABLES
 T_OUTTAB = IT_VBAK
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Lakshman

Sorting technique used by oracle for "order by" clause.

Hi All,
it could be very help to me if you provide some information about sorting technique used by oracle engine for order by clause.
Issue i am facing :
Table : xx
Line Date
1 05-06-2013 00:00:00
2 05-06-2013 00:00:00
when we query above table using order by date, it is returning line 2 prior to line 1. we would like to know why it is returning line 2 first?
Regards,
Ram

>
it could be very help to me if you provide some information about sorting technique used by oracle engine for order by clause.
>
Well ok - but be warned that many people wind up being sorry they ask that question. Hopefully Hemant's answer is what you really wanted.
See 'Linguistic Sorting and String Searching' in the Oracle® Database Globalization Support Guide
http://docs.oracle.com/cd/B28359_01/server.111/b28298/ch5lingsort.htm
Sorting will be controlled by the settings of NLS_LANGUAGE, NLS_SORT and NLS_COMP.
Here is the doc page for NLS_SORT
http://docs.oracle.com/cd/B28359_01/server.111/b28298/ch3globenv.htm#i1008393
>
NLS_SORT specifies the type of sort for character data. It overrides the default value that is derived from NLS_LANGUAGE.
NLS_SORT contains either of the following values:
NLS_SORT = BINARY | sort_name
BINARY specifies a binary sort. sort_name specifies a linguistic sort sequence.
>
And the one for NLS_COMP
http://docs.oracle.com/cd/B28359_01/server.111/b28298/ch3globenv.htm#i1008458
>
The value of NLS_COMP affects the comparison behavior of SQL operations.
You can use NLS_COMP to avoid the cumbersome process of using the NLSSORT function in SQL statements when you want to perform a linguistic comparison instead of a binary comparison. When NLS_COMP is set to LINGUISTIC, SQL operations perform a linguistic comparison based on the value of NLS_SORT. A setting of ANSI is for backward compatibility; in general, you should set NLS_COMP to LINGUISTIC when you want to perform a linguistic comparison.

Need help in getting subtotal in ALV

Hi Experts
I've done subtotal in ALV. I'm getting below output. But i want net value subtotal should come by adding to its previous subtotal.
Ex : 4969 02.01.1997 CURA 5.500
 4970 03.01.1997 CURA 38.338 (32.838 + 5.500)
My code :
type-pools slis.
data : BEGIN OF ty_vbak OCCURS 0,
 VBELN like vbak-vbeln,
 erdat like vbak-erdat,
 ernam like vbak-ernam,
 netwr like vbak-netwr,
 END OF ty_vbak.
DATA : it_fcat type SLIS_T_FIELDCAT_ALV,
 WA_FCAT TYPE SLIS_FIELDCAT_ALV,
 IT_SORT TYPE SLIS_T_SORTINFO_ALV,
 WA_SORT TYPE SLIS_SORTINFO_ALV,
 G_VBELN TYPE VBAK-VBELN.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 I_PROGRAM_NAME = SY-REPID
 I_INTERNAL_TABNAME = 'TY_VBAK'
* I_STRUCTURE_NAME =
* I_CLIENT_NEVER_DISPLAY = 'X'
 I_INCLNAME = SY-REPID
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
 CHANGING
 CT_FIELDCAT = it_fcat.
SELECT-OPTIONS S_VBELN FOR G_VBELN.
SELECT VBELN ERDAT ernam NETWR
 FROM VBAK INTO TABLE ty_vbak WHERE VBELN IN S_VBELN.
* WA_FCAT-FIELDNAME = 'VBELN'.
* WA_FCAT-SELTEXT_M = 'Sales Document'.
* WA_FCAT-OUTPUTLEN = 20.
* APPEND WA_FCAT TO IT_FCAT.
* WA_FCAT-FIELDNAME = 'ERDAT'.
* WA_FCAT-SELTEXT_M = 'DATE'.
* APPEND WA_FCAT TO IT_FCAT.
* WA_FCAT-FIELDNAME = 'NETWR'.
* WA_FCAT-SELTEXT_M = 'NET PRICE'.
* WA_FCAT-DO_SUM = 'X'.
* WA_FCAT-OUTPUTLEN = 40.
* APPEND WA_FCAT TO IT_FCAT.
* CLEAR WA_FCAT.
READ TABLE IT_FCAT INTO WA_FCAT WITH KEY FIELDNAME = 'NETWR'.
WA_SORT-FIELDNAME = 'ERDAT'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
WA_FCAT-FIELDNAME = ' '.
WA_FCAT-DO_SUM = 'X'.
MODIFY IT_FCAT FROM WA_FCAT TRANSPORTING
 DO_SUM KEY WHERE FIELDNAME = 'NETWR'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
* I_CALLBACK_PROGRAM = ' '
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
* IS_LAYOUT =
 IT_FIELDCAT = IT_FCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
 IT_SORT = IT_SORT
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = ty_vbak
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.

Hi,
Please try the below Sample code once.
TYPE-POOLS : SLIS.
types : begin of ty_final,
 vbeln type vbak-vbeln,
 posnr type vbap-posnr,
 ernam type vbak-ernam,
 erdat type vbak-erdat,
 netwr type vbak-netwr,
 COL(4) TYPE C,
 end of ty_final.
data : lt_vbak type table of vbak,
 lt_vbap type table of vbap,
 wa_vbap type vbap,
 wa_vbak type vbak,
 lt_final type table of ty_final,
 wa_final type ty_final,
 LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
 WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
 L_NETWR TYPE VBAK-NETWR,
 INDEX TYPE SY-INDEX.
 select * from vbak into table lt_vbak up to 100 rows.
if lt_vbap is not initial.
 select * from vbap into table lt_vbap for all entries in lt_vbak where vbeln = lt_vbak-vbeln.
endif.
 LOOP AT LT_VBAP INTO WA_VBAP.
 INDEX = INDEX + 1.
 READ TABLE LT_VBAK INTO WA_VBAK WITH KEY VBELN = WA_VBAP-VBELN.
 WA_FINAL-VBELN = WA_VBAK-VBELN.
 WA_FINAL-POSNR = WA_VBAP-POSNR .
 WA_FINAL-ERNAM = WA_VBAK-ERNAM.
 WA_FINAL-ERDAT = WA_VBAK-ERDAT.
 WA_FINAL-NETWR = WA_VBAP-NETWR.
 APPEND WA_FINAL TO LT_FINAL.
 L_NETWR = L_NETWR + WA_FINAL-NETWR.
 AT END OF VBELN.
 WA_FINAL-VBELN = ' '.
 WA_FINAL-POSNR = ' ' .
 WA_FINAL-ERNAM = 'Sub Total'.
 WA_FINAL-ERDAT = ' '.
 WA_FINAL-NETWR = L_NETWR.
 WA_FINAL-COL = 'C310'.
 INDEX = INDEX + 1.
 INSERT WA_FINAL INTO LT_FINAL INDEX INDEX.
 CLEAR : WA_FINAL, WA_VBAK, WA_VBAP.
 ENDAT.
ENDLOOP.
*Build fieldcat
 PERFORM BUILDFIELDCAT USING : '1' 'VBELN' 'LT_FINAL' 'VBELN' ,
 '2' 'POSNR' 'LT_FINAL' 'POSNR' ,
 '3' 'ERNAM' 'LT_FINAL' 'ERNAM' ,
 '4' 'ERDAT' 'LT_FINAL' 'ERDAT' ,
 '5' 'NETWR' 'LT_FINAL' 'NETWR'.
* Layout Design
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
WA_LAYOUT-INFO_FIELDNAME = 'COL'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = SY-CPROG
 I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 IS_LAYOUT = WA_LAYOUT
 IT_FIELDCAT = LT_FIELDCAT
 I_SAVE = 'A'
 TABLES
 T_OUTTAB = LT_FINAL.
*& Form BUILDFIELDCAT
FORM BUILDFIELDCAT USING P_COL_POS
 P_FIELDNAME
 P_REF_TAB
 P_SEL_TXT. "#EC *
WA_FIELDCAT-COL_POS = P_COL_POS.
WA_FIELDCAT-FIELDNAME = P_FIELDNAME.
WA_FIELDCAT-SELTEXT_L = P_SEL_TXT .
APPEND WA_FIELDCAT TO LT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " BUILDFIELDCAT
Regards,
Srikanth

Multiple level of subtotal in alv

Hi Experts,
Can any one tell me how to get multiple level of subtotal in alv?
I am using function module to get the output.

Hi Surajit
can you explain ur requirement
Regards
Prabumanoharan

Subtotal in ALV without sort technique to maintain heirarchy of records.

Similar Messages

Maybe you are looking for