Suddenly Error -17306 in LV-Operator-Interface after 3 hours when trying to read a StationGlobal
Hello,
i´m using the example-labview-operator-interface with some modifications.
One of the changes is that i created a Thread (UserEcentCallback.vi) which reads a value from the StationGlobals and displays it on the OP.
This thread is running in a loop and executed every second. This worked fine for ~ 3hours and suddenly the attached error-message appeared.
What can i do to prevent this problem?
I´m using the default "TestStand Get Property Value.vi" to read the Globals.
Thanks for all tips.
Attachments:
error4.JPG 66 KB
Hi,
That seems a strange one, especially seeing the VI before it must have found the property ProjectParameter as it read State_Mode without problems.
I guessing ProjectParameter is still present in your StationGlobals after the error occurred!
As to what to do, you could do a Check to make sure the property exists before reading the data.
Regards
Ray
Regards
Ray Farmer
Similar Messages
-
Hi all,
I need to create service to access all unread mails of other mailbox's every time in Exchange server 2013, for that i trying to use Delegate access.
but i am not succeed. I am getting Error Every time : [The specified object was not found in the store]
error shows in FolderId in
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
List<DelegateUser> newDelegates = new List<DelegateUser>();
DelegateUser emailDelegate = new DelegateUser("[email protected]");
emailDelegate.Permissions.InboxFolderPermissionLevel = DelegateFolderPermissionLevel.Editor;
newDelegates.Add(emailDelegate);
Mailbox mailbox = new Mailbox("[email protected]");
Collection<DelegateUserResponse> response = service.AddDelegates(mailbox, MeetingRequestsDeliveryScope.DelegatesAndSendInformationToMe, newDelegates); var userMailbox = new Mailbox(useremail);
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
var itemView = new ItemView(20);
var userItems = service.FindItems(folderId, itemView);
i changed my code in many ways by adding new Delegate User with different folder permissions.
but i am getting same Error, Please help me.That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
Cheers
Glen -
Suddenly Error -17306 in LV-Operator-Interface after 3 hours when trying to read a StationGlobal
Hello,
i´m using the example-labview-operator-interface with some modifications.
One
of the changes is that i created a Thread (UserEcentCallback.vi) which
reads a value from the StationGlobals and displays it on the OP.
This
thread is running in a loop and executed every second. This worked fine
for ~ 3hours and suddenly the attached error-message appeared.
What can i do to prevent this problem?
I´m using the default "TestStand Get Property Value.vi" to read the Globals.
Thanks for all tips.
(Sorry for double posting, buut i dont know if this is a labview or teststand-problem)
Attachments:
error4.JPG 66 KBHi,
That seems a strange one, especially seeing the VI before it must have found the property ProjectParameter as it read State_Mode without problems.
I guessing ProjectParameter is still present in your StationGlobals after the error occurred!
As to what to do, you could do a Check to make sure the property exists before reading the data.
Regards
Ray
Regards
Ray Farmer -
Error message when trying to read ebook E_AUTH_BAD_DEVICE_KEY_OR_PKCS12
has anyone had this happen, error message when trying to read ebook E_AUTH_BAD_DEVICE_KEY_OR_PKCS12
deauthorize (shift-ctrl-d) and then restart ade. you will be prompted to re-authorize.
-
What are solutions to the "Unexpected error while attempting to bind. Operation cancelled." message when trying to bind and i alreeady cheack my DNS settings and everything
Has this worked before, or is this a new configuration?
On the server, launch Terminal.app from Applications > Utilities and post the output of the following harmless diagnostic command — and you'll need to enter an administrative password when requested:
sudo changeip -checkhostname
On the OS X (presumably) Mavericks client, please post the IP address(es) of the DNS server(s) you're referencing. These are available via the System Preferences > Network > Advanced > DNS settings.
To check the console logs, launch Console.app from Applications > Utilities on both the client and the server, and then attempt the binding, and then post a (short! no more than ~25 to 50 lines!) of any errors related to the binding error.
If you're not in a position to post configuration details here — which is perfectly reasonable, and entirely your prerogative — or if I'm getting too confusing or too technical with some of the questions here, which would be my error of course — then (assuming these systems are under warranty) I'd suggest contacting the folks at the local Apple Store and having a chat with the local Geniuses about this, or checking directly with the Apple Support folks via telephone. -
Error 7 occurred when trying to read a spreadsheet file in LabVIEW
Hi,
I got the message (in bold) below when I was trying to read a text file type. I also include a snippet of my block diagram.
Error 7 occurred at Open File+.vipen File
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or
the file path might be incorrectly formatted for the operating system.
For example, use \ as path separators on Windows, : on Mac OS X, and /
on Linux. Verify that the path is correct using the command prompt or
file explorer.
I really appreciate if someone can help me. Thanks.
Attachments:
read from spreadsheet.png 70 KBHi Ravens Fan,
Thanks again for your valuable input. I replaced the string manipulation functions with a path control. I think it works coz I can see the waveform data, rms values etc. And then you said if it works, do a Path to String on that...and I'm not exactly sure how to do that. I attached a snippet of the modified vi. you may refer the original vi snippet in my previous email.
I appreciate it if you could help me again.
Thanks.
Attachments:
read from spreadsheet2.png 283 KB -
Facing error when trying to read message from MQ through B2B
Hi,
I'm trying to read the messages from MQ through B2B.
I have created a listening channel in B2B console.
Also place the required jar files in the Domain_Dir/lib folder.For your reference the jar files are given below,
a. com.ibm.mqjms.jar
b. dhbcore.jar
c. com.ibm.mq.jar
d. com.ibm.mq.jmqi.jar
e. mqcontext.jar
g. com.ibm.mq.commonservices.jar
h. com.ibm.mq.headers.jar
i. com.ibm.mq.pcf.jar
But i'm encounter the below error while reading the MQ. Pls let me know if i'm missing something.
####<Oct 9, 2014 4:00:03 PM IST> <Error> <oracle.soa.b2b.engine> <ULCAKESBTD1P> <b2b-server> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
> <<anonymous>> <> <0000KZoSn1y5YbWzLwyGOA1KDaCI000002> <1412850603388> <BEA-000000> <oracle.tip.b2b.transport.TransportException: [JMS_CONN_INVALID] JMS connection error.
at oracle.tip.b2b.transport.TransportException.create(TransportException.java:93)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:199)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.<init>(JMSMonitor.java:181)
at oracle.tip.b2b.transport.basic.JMSReceiver.init(JMSReceiver.java:266)
at oracle.tip.b2b.transport.b2b.B2BTransport.init(B2BTransport.java:577)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:240)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: oracle.tip.b2b.transport.TransportException: [JMS_CONN_FAC_NOT_FOUND] JMS_CONN_FAC_NOT_FOUND
at oracle.tip.b2b.transport.TransportException.create(TransportException.java:78)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:208)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getQueueConnectionFactory(JMSConnectionFactoryFactory.java:85)
at oracle.tip.b2b.transport.basic.jms.JMSConnection.<init>(JMSConnection.java:136)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:195)
... 7 more
Caused by: java.lang.ClassNotFoundException: QMUL.PDT
at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:190)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:162)
... 10 more
oracle.tip.b2b.transport.TransportException: [JMS_CONN_INVALID] JMS connection error.
at oracle.tip.b2b.transport.TransportException.create(TransportException.java:93)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:199)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.<init>(JMSMonitor.java:181)
at oracle.tip.b2b.transport.basic.JMSReceiver.init(JMSReceiver.java:266)
at oracle.tip.b2b.transport.b2b.B2BTransport.init(B2BTransport.java:577)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:240)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused By: oracle.tip.b2b.transport.TransportException: [JMS_CONN_FAC_NOT_FOUND] JMS_CONN_FAC_NOT_FOUND
at oracle.tip.b2b.transport.TransportException.create(TransportException.java:78)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:208)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getQueueConnectionFactory(JMSConnectionFactoryFactory.java:85)
at oracle.tip.b2b.transport.basic.jms.JMSConnection.<init>(JMSConnection.java:136)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:195)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.<init>(JMSMonitor.java:181)
at oracle.tip.b2b.transport.basic.JMSReceiver.init(JMSReceiver.java:266)
at oracle.tip.b2b.transport.b2b.B2BTransport.init(B2BTransport.java:577)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:240)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused By: java.lang.ClassNotFoundException: QMUL.PDT
at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:190)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:162)
at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getQueueConnectionFactory(JMSConnectionFactoryFactory.java:85)
at oracle.tip.b2b.transport.basic.jms.JMSConnection.<init>(JMSConnection.java:136)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:195)
at oracle.tip.b2b.transport.basic.jms.JMSMonitor.<init>(JMSMonitor.java:181)
at oracle.tip.b2b.transport.basic.JMSReceiver.init(JMSReceiver.java:266)
at oracle.tip.b2b.transport.b2b.B2BTransport.init(B2BTransport.java:577)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:240)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
####<Oct 9, 2014 4:00:20 PM IST> <Warning> <oracle.adfinternal.view.faces.partition.FeatureUtils> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KZoSn1y5YbWzLwyGOA1KDaCI000002> <1412850620868> <ADF_FACES-30130> <Ignoring feature-dependency on feature "AdfDvtCommon". No such feature exists.>
####<Oct 9, 2014 4:00:21 PM IST> <Warning> <org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KZoSn1y5YbWzLwyGOA1KDaCI000002> <1412850621197> <BEA-000000> <Configurator services already initialized.>
####<Oct 9, 2014 4:00:30 PM IST> <Notice> <Log Management> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1412850630361> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
####<Oct 9, 2014 4:00:30 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <main> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac6> <1412850630614> <BEA-000365> <Server state changed to ADMIN>
####<Oct 9, 2014 4:00:30 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <main> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac6> <1412850630698> <BEA-000365> <Server state changed to RESUMING>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631051> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:214:4fff:feeb:478d:7003 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631051> <BEA-002613> <Channel "Default[1]" is now listening on 10.236.77.12:7003 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631052> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:214:4fff:feeb:478c:7003 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631053> <BEA-002613> <Channel "Default[4]" is now listening on 127.0.0.1:7003 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631053> <BEA-002613> <Channel "Default" is now listening on 192.168.107.97:7003 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631054> <BEA-002613> <Channel "Default[5]" is now listening on 0:0:0:0:0:0:0:1:7003 for protocols iiop, t3, ldap, snmp, http.>
####<Oct 9, 2014 4:00:31 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631055> <BEA-000332> <Started WebLogic Managed Server "b2b-server" for domain "b2b-domain" running in Development Mode>
####<Oct 9, 2014 4:00:32 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <main> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac6> <1412850632557> <BEA-000365> <Server state changed to RUNNING>
####<Oct 9, 2014 4:00:32 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <main> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac6> <1412850632559> <BEA-000360> <Server started in RUNNING mode>
####<Oct 9, 2014 4:00:38 PM IST> <Warning> <oracle.soa.services.notification> <ULCAKESBTD1P> <b2b-server> <TimerFactory> <<anonymous>> <> <0000KZoSn1y5YbWzLwyGOA1KDaCI000002> <1412850638612> <BEA-000000> <<.> Notification via email, voice, SMS or IM will not be sent. If you would like to enable them, please configure corresponding sdpmessaging driver. Then modify the accounts and set NotificationMode attribute to either NONE, EMAIL or ALL in workflow-notification-config.xml>
####<Oct 9, 2014 4:02:41 PM IST> <Warning> <Socket> <ULCAKESBTD1P> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a2e657fa9e6b5d11:789eb8cc:148f4403946:-8000-00000000000029c4> <1412850761335> <BEA-000449> <Closing socket as no data read from it on 192.168.96.66:29,963 during the configured idle timeout of 5 secs>
####<Oct 9, 2014 4:02:51 PM IST> <Warning> <Socket> <ULCAKESBTD1P> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a2e657fa9e6b5d11:789eb8cc:148f4403946:-8000-00000000000029d2> <1412850771337> <BEA-000449> <Closing socket as no data read from it on 192.168.96.66:29,970 during the configured idle timeout of 5 secs>
####<Oct 9, 2014 4:03:16 PM IST> <Warning> <Socket> <ULCAKESBTD1P> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a2e657fa9e6b5d11:789eb8cc:148f4403946:-8000-00000000000029f4> <1412850796335> <BEA-000449> <Closing socket as no data read from it on 192.168.96.66:29,984 during the configured idle timeout of 5 secs>
Thanks,
Ravindra.Hi Ravindra,
Which mode of connectivity are you trying (credential based / .bindings based)
MQ connectivity support is provided via JMS offering of Oracle B2B. This blog post will provide you the steps for the same - https://blogs.oracle.com/oracleb2bgurus/entry/b2b_communication_using_ibm_mq
Please ensure to provide the proper values for connection factory and other details in JMS configuration in B2B
HTH -
Error code 1004 keeps coming up on my iPhone 4 when trying to download apps and music through wifi
My iPhone 4 keeps coming up with error 1004 when trying to download apps and music via wifi
Tks heaps for that, had a look at Store and ITunes sections, not overly helpful unless I am missing something.
My issue is that on my computer she would update her iPhone with Software updates via iTunes.
I have gone and deleted her backups that were still sitting on there.
If I want to update my Apps on my iPhone when due her Apple ID and password request will come up as an option to use that account if I knew the password and it's synced from my Computer even though she has been gone 7 months now. Is it a syncing issue or is her Apple ID stored in my iTunes backups somehow and keeps coming back? Do I need to de-authorize her account from my Computer? -
Getting an error 33162 when trying to read analog input on FP
I am getting a error when trying to do a simple analog input read using Field Point. I have a FP-2000 network module and am trying to read channel 0 at FP-TB-10 @3 which has an AI-C420 analog input module in place. There is no definition for the error and I can read the signal from Field Point Explorer just fine.
I have downloaded the example continuous read vi from the web site and it does not work either. It seems that this should not be complicated but this is not the 1st problem I have had. I will take any suggestions. Thank you.Mike,
Error code 33162, "Can not connect to item on module," generally is the result of attempting to connect to an item that is not available at the first connection attempt. This is frequently the result of an ethernet network module being offline when you attempt to connect to it. Since you are able to connect from FieldPoint Explorer, I suspect something else is going on. The likeliest possibilities that I can think of are:
1) You have more than one ethernet Comm Resource in your IAK file and you have provided the name for the wrong resource (e.g. you may have had a different IP address and created a new Comm Resourcefor the new IP address, but left the old one in place and are using the wrong one).
2) Similar to #1 above, you changed the IP address in
the Comm Resource but did not save the change so there is no module at the IP address it is attempting to communicate with.
3) There is a misconfiguration in the IAK file and the FP-TB-10 shows a listing for a digital module at address 0 rather than an analog module.
4) The module is misaddressed. I have occasionally seen instances where the protective end cover was not installed on the last terminal base and a piece of metal shorted some of the pins causing the addressing to be incorrect. Since this method of failure would also show up in FieldPoint Explorer, I do not think it is likely the root cause of your problem.
5) You have booted the FP-20xx in Safe Mode (although FieldPoint Explorer will not work in this case so I do not think it is likely).
Note: If you had successfully connected and then lost the connection, the error code is 33163, "The connection to the module has been broken."
Regards,
Aaron -
Keep getting this error message when trying to load a cd of pictures from our newer MacMini onto an older MacBook. Suggestions?
What version of iPhoto on the Older MacBook?
What version of iPhoto on the newer Mini?
How did you make disk?
Regards
TD -
-251723760 CIP Error when trying to read and array of sgl from and AB ControlLogix PLC
I have the NI Ethernet/IP module to communicate with an Allen-Bradley ControlLogix PLC. I am doing both reading (only 13 values) and writing (over 200 values). I am using the basic ethernetip tag write.vi to do the writing. These program are in an executable running on a 'run-time' machine. I have the list of tagnames I am reading and writing to and have confirmed with the person who created the AB load that the array I am writing to on the AB side has more than enough addresses (it is an array of length 300). However I am only able to write 118 values to it. When trying to write 119 or more I get the error:
-251723760 CIP error - extended status may be available
I have confirmed with NI OPC Servers with an OPC quick client (running on my development PC) connected to the AB ControlLogix that the values I am writing to up to element 118 are getting through correctly, i.e. if I write 123.456 to sample_array[13] then I in fact see this same value at that location in the OPC quick client.
To be honest I am a little disappointed that the error message is so cryptic and gives no hints as to what troubleshooting paths are possible. I have tried various combinations of group/tag names with and w/o offsets, e.g. [3], but nothing has led me any further.Thanks for the quick response - here are screenshots of before (write OK - writing 118 values - all except last are 0) and after (error - when trying to write an array of length 119) as well as the simple test program I as using.
Attachments:
NI Ethernet_IP 3-20-2013 Troubleshooting.zip 90 KB -
Error -1967390704 when trying to read historical data from CITADEL
I am trying to read historical data for 8 tags in a 'for loop'. If I run the historical vi while my data collection vi is running, I get the error -1967390704 CIT_ReadTrace.vi error code 0x8abc010. I have installed the DSC6.1 fixes and also updated the logos version to 4.4. Is it generally a good practice to not access historical data while new data could still be written to CITADEL?? Is there a vi or anything that could check the versions of all the installed NI software to the latest versions that are available??
I had some major problems when I installed the latest updates. I unzipped to the wrong directory and had multiple copies of some labview files. It really made for some strange operation. Right now I am running labview 6.1 with feb26,2003 updates from the web, logos version 4.4.0.17. It sounds like your database may be corrupted. They also sent me a file to workaround a read issue with the historical vi's.
Attachments:
BenchReadHistTrend.llb 104 KB -
Getting error code -1967353908 when trying to read a modbus address
I'm using the Modbus I/O server in LabVIEW 2010 to communicate with a Kohler generator. A vendor was able to supply with the the Modbus address mapping so that I'd know what addresses correspond to what IO points. One of the addresses is 40126 which I create in the Modbus I/O server as 400126 since it requires six digit addressing. Well, that worked but only temporarily. Not too long after I begin trying to make sense of the values read, the shared variable begins showing error -1967353908. The description for this error is "The specified data item address is not an allowable address for the Modbus slave device. Refer to the documentation of the Modbus slave device for information about supported addresses."
What I don't understand is why it works one minute and stops working the next. Also, I know that the Modbus server itself is not erroring b/c in my VI there are other boolean bit addresses that continue to report good data. Can anyone assist in helping me figure this one out? Thanks.
Ryan R.Ryan,
This error may occur with certain Modbus slave devices, because the I/O actually queries for a range of addresses, some of which may not exist on the device. To remedy this issues, reduce the number of Holding Registers in the Advanced Settings of the IO Server to 1.
Let us know if you have further trouble!
Drew T.
NIC AE Specialist -
Garage band newbie here...Been trying to record using PreSonus as my interface..having nothing but problems when I try to bring up
garageband. Multible restarts did help at first but now I can get no sound and cant seem to load the drivers at all in output/input...any help with this problem?YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga. -
Error message: "The application "Numbers" is not open anymore." when trying to open or force quit.
MacBook Pro (15-inch, Late 2008) OS 10.10.1
iWork ‘08
Numbers 1.0.1
Error message: "The application "Numbers" is not open anymore."
I've tried to delete iWork & reload it, but still get the same message and can't open numbers. I've run disc utility (verify & repair disc and permissions).Jane,
iWork '09 is $19 on Amazon. I would jump on that option. You won't miss iWork'08.
Jerry
Maybe you are looking for
-
To send data from a Recordset (DI) to a matrix(grid) of UI.
Hello to all, I am creating a demo, a SQL execute with a Recordset, any problem until the moment, when I want to pass the data to one you GRID (matrix) I don't eat to make it. it grid it it is an object of UI and the recordset of DI as I can supple
-
Printing from a macbook pro to an HP psc 2355 printer
I need helping printing from a macbook pro to an hp psc 2355 printer. The printer is connected to a pc which runs Windows Vista. The pc is connected to a wireless router (so the PC has to be on to print). Hope this is simple!
-
Play WMV in browser not working.
Visitors get a download box to get the movie and it does not play in the browser like i wish it to do. I have tried both Firefox and Internet Explorer both have the same results. the download box appears. how may i have the movie play in the browser
-
Hi! One particular activity was set DLFL and in the Activity- assignment field it is asking for Business Area. The field has greyed out. It is not allowing to remove the deletion flag either.Your help in this regard shall be appreciated. I tried with
-
LMS 4.2.2 User Tracking - IP resolving
Hello, I have made a fresh install of LMS 4.2.2 and I have a problem with the user Tracking. My architecture : A pair of 4500-X running Version 03.03.00.SG 10 stack of 2960-S running IOS : 12.2.55.SE5 The 4500-X are routing cores. Everything is runn