Suggest me the tricky query  please

Hi
i want to write a sql query which shown as follows:
input inline:
a : prasanth
b : asuri
output should be:
prasanth asuri(combination of a and v variables)
that is too without pl/sql block.
please suggest me sql query;
thanks in advance
prasanth

Hi,
SELECT SYS_CONNECT_BY_PATH(name, ' ') "Path" FROM
(SELECT rownum ID ,rownum-1 PID,name FROM (
SELECT 'CHITTA' NAME FROM DUAL UNION SELECT 'RANJAN' FROM DUAL))
where id = (2) -- this should be max Rownum
START WITH pID=0
CONNECT BY PRIOR id = pid
or if it is a table
SELECT SYS_CONNECT_BY_PATH(dname, ' ') "Path" FROM
(SELECT rownum ID ,rownum-1 PID,dname FROM (select * from dept))
where id = (select max(rownum) from dept)
START WITH pID=0
CONNECT BY PRIOR id = pid
It is OK With you ..
Bye
Chitta

Similar Messages

  • In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String

    In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String , for executing the Stored Procedure with Current date as the input .

    Hi Srinath,
    The below blog might be useful
    http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/03/06/executing-stored-procedure-from-sender-adapter-in-sap-pi-71
    PI/XI: Sender JDBC adapter for Oracle stored procedures in 5 days
    regards,
    Harish

  • How to improve the performance of the attached query, Please help

    Hi,
    How to improve performance of the below query, Please help. also attached explain plan -
    SELECT Camp.Id,
    rCam.AccountKey,
    Camp.Id,
    CamBilling.Cpm,
    CamBilling.Cpc,
    CamBilling.FlatRate,
    Camp.CampaignKey,
    Camp.AccountKey,
    CamBilling.billoncontractedamount,
    (SUM(rCam.Impressions) * 0.001 + SUM(rCam.Clickthrus)) AS GR,
    rCam.AccountKey as AccountKey
    FROM Campaign Camp, rCamSit rCam, CamBilling, Site xSite
    WHERE Camp.AccountKey = rCam.AccountKey
    AND Camp.AvCampaignKey = rCam.AvCampaignKey
    AND Camp.AccountKey = CamBilling.AccountKey
    AND Camp.CampaignKey = CamBilling.CampaignKey
    AND rCam.AccountKey = xSite.AccountKey
    AND rCam.AvSiteKey = xSite.AvSiteKey
    AND rCam.RmWhen BETWEEN to_date('01-01-2009', 'DD-MM-YYYY') and
    to_date('01-01-2011', 'DD-MM-YYYY')
    GROUP By rCam.AccountKey,
    Camp.Id,
    CamBilling.Cpm,
    CamBilling.Cpc,
    CamBilling.FlatRate,
    Camp.CampaignKey,
    Camp.AccountKey,
    CamBilling.billoncontractedamount
    Explain Plan :-
    Description                    Object_owner          Object_name     Cost     Cardinality     Bytes     
    SELECT STATEMENT, GOAL = ALL_ROWS                              14     1     13
    SORT AGGREGATE                                                  1     13
    VIEW                         GEMINI_REPORTING               14     1     13
    HASH GROUP BY                                        14     1     103
    NESTED LOOPS                                        13     1     103
    HASH JOIN                                             12     1     85
    TABLE ACCESS BY INDEX ROWID     GEMINI_REPORTING     RCAMSIT          2     4     100
    NESTED LOOPS                                        9     5     325
    HASH JOIN                                        7     1     40
    SORT UNIQUE                                        2     1     18
    TABLE ACCESS BY INDEX ROWID     GEMINI_PRIMARY          SITE          2     1     18
    INDEX RANGE SCAN          GEMINI_PRIMARY          SITE_I0          1     1     
    TABLE ACCESS FULL          GEMINI_PRIMARY          SITE          3     27     594
    INDEX RANGE SCAN          GEMINI_REPORTING     RCAMSIT_I     1     1     5     
    TABLE ACCESS FULL     GEMINI_PRIMARY     CAMPAIGN                    3     127     2540
    TABLE ACCESS BY INDEX ROWID     GEMINI_PRIMARY          CAMBILLING     1     1     18
    INDEX UNIQUE SCAN     GEMINI_PRIMARY     CAMBILLING_U1                    0     1

    Hello,
    This has really nothing to do with the Oracle Forms product.
    Please, send the SQL or/and PL/SQL questions in the corresponding forums.
    Francois

  • Suggest the query to this tricky query please

    Hi people,
    I just got a query which is a brain tease for me (not all).
    that is
    sql> select * from mytab;
    sql> no name
    1 asuri
    1 prasanth
    2 brian
    2 lara
    the above is query is returned by the sql;
    here 1 and 2 are duplicated values;
    now output required is
    sql>no name
    1 asuri prasanth
    2 brain lara
    Is this possible with a single sql query;
    please tell me solution
    regards
    prasanth

    How do find that it should be brian lara not lara brian..
    But any way the following will do ...SQL> select * from mytab;
    A NAME
    1 asuri
    1 prasanth
    2 brian
    2 lara
    SQL> select a,name||' '||name2 name from
    2 (
    3 select a,name,lead(name) over (partition by a order by a) name2 from mytab)
    4 where name2 is not null;
    A NAME
    1 asuri prasanth
    2 brian lara
    The names by above query can be returned as 'lara brian' and 'prasanth asuri' as there is no way telling which one is a surname..

  • Can anyone please  suggest for the following query relating to OEDQ ?

    I have to process 10M  records through batch matching by Oracle EDQ.  There will be 10 file(.csv)  each size 1M. They will be placed landing area of EDQ one by one separately. Given, All 10 file should have same number of columns & same order of columns. I have to process them one by one sequentially through only single batch contact match job.
    Condition is : 
    Only one batch job will be executed 10 times to process them. At each iteration/operation, one file (.csv) will be taken as input in that job. As we know, only one source is present in  job. I have to create /run ShellScript which will be passing  one file to the single snapshot  via single datastore from the landing area of EDQ. Once the one input file  is passed and complete matching is done, Without changing anything, Is it possible to pass 2nd input file  to that snapshot via previously created datastore by that Shell-script.
    I mean, I want to pass one by one file  sequentially  via  single snapshot via single datastore to a batch job  using unix shellscript. 
    Is it feasible to consider in my project????
    Any suggestion will be highly appreciated. Thanks in advance.

    Hi Mike,
    Thanks for the quick response.
    Keeping in mind source will be changed sequentially/one after another but the target is constant & the same JOB will be executed each time.
    suppose, I have two file in the landing area of EDQ. These file are:  PersonData.csv  and goutam.csv
    PersonData.csv is used in current data store.
    File in the working area:    C:\Program Files\Datanomic\dnDirector\config\landingarea\PersonData.csv
    Snapshot is using  this datastore. I have right clicked on the snapshot. I have done setting externalize option enable.
    I am using the command:
    java -jar jmxtools.jar runopsjob -job "Testing for R3  source A" -project EDQ-CDS -runlabel Nov2014 -nowait -u dnadmin -p p4dqnvo2 localhost:9005
    This command is successfully executing batch job "Testing for R3  source A "   where source is PersonData.csv.
    Now, I  want to use the following command with externalize option to execute  the file goutam.csv as source  by the above job.
    I am using the below command:
    java -jar jmxtools.jar runopsjob -job "Testing for R3  source A" -project EDQ-CDS -runlabel Nov2014 -D externalized=goutam -nowait -u dnadmin -p p4dqnvo2 localhost:9005
    this command also executes the file PersonData.csv instead of goutam.csv file.  In the above command I have highlighted  externalize option with deep black color . please let me know how I write this externalize option in the command so that it should execute goutam.csv file.
    Meanwhile, I am googling to find solution.
    Regards,
    Goutam Samanta

  • Sophos virus detector has advised that I have a virus- unable to clean it up manually as suggested by the quarantine Manager, please advise

    I have a Mac (Mavericks) - Sophos virus detector has advised that I have a vrius - I opened Quarantine Manager -  advised to clean up manually.
    However, when unlocking the padlock to do the manually clean up - the " clean up" option was greyed out.
    Please advise how to get rid of the vrius - It is called Mal/frame-AH
    thank you
    Sue

    It's a Windows exploit, harmless on a Mac. Emptying your browser caches should remove it (if it is still there)

  • Suggestion to the administrators and please delete my account

    Not being able to change our e-mail address is exceptionally lame. E-mail addresses do change. Perhaps not in Oracle's networks, but in the real world they do.
    Please delete my account so that I may recreate it with my new e-mail address.
    Thanks...

    We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
    You cannot delete an account, you can only remove personal info from it and stop using it.
    You should be able to change your payment method and region/address on your account by logging into it via Settings > iTunes & App Store on your phone, or via the Store > View Account menu option on your computer's iTunes.
    If you currently have a South African credit card on your account then you will need to remove it, you can't use a credit card issued by another country's bank

  • How to improve performance of the attached query

    Hi,
    How to improve performance of the below query, Please help. also attached explain plan -
    SELECT Camp.Id,
    rCam.AccountKey,
    Camp.Id,
    CamBilling.Cpm,
    CamBilling.Cpc,
    CamBilling.FlatRate,
    Camp.CampaignKey,
    Camp.AccountKey,
    CamBilling.billoncontractedamount,
    (SUM(rCam.Impressions) * 0.001 + SUM(rCam.Clickthrus)) AS GR,
    rCam.AccountKey as AccountKey
    FROM Campaign Camp, rCamSit rCam, CamBilling, Site xSite
    WHERE Camp.AccountKey = rCam.AccountKey
    AND Camp.AvCampaignKey = rCam.AvCampaignKey
    AND Camp.AccountKey = CamBilling.AccountKey
    AND Camp.CampaignKey = CamBilling.CampaignKey
    AND rCam.AccountKey = xSite.AccountKey
    AND rCam.AvSiteKey = xSite.AvSiteKey
    AND rCam.RmWhen BETWEEN to_date('01-01-2009', 'DD-MM-YYYY') and
    to_date('01-01-2011', 'DD-MM-YYYY')
    GROUP By rCam.AccountKey,
    Camp.Id,
    CamBilling.Cpm,
    CamBilling.Cpc,
    CamBilling.FlatRate,
    Camp.CampaignKey,
    Camp.AccountKey,
    CamBilling.billoncontractedamount
    Explain Plan :-
    Description Object_owner Object_name Cost Cardinality Bytes
    SELECT STATEMENT, GOAL = ALL_ROWS 14 1 13
    SORT AGGREGATE 1 13
    VIEW GEMINI_REPORTING 14 1 13
    HASH GROUP BY 14 1 103
    NESTED LOOPS 13 1 103
    HASH JOIN 12 1 85
    TABLE ACCESS BY INDEX ROWID GEMINI_REPORTING RCAMSIT 2 4 100
    NESTED LOOPS 9 5 325
    HASH JOIN 7 1 40
    SORT UNIQUE 2 1 18
    TABLE ACCESS BY INDEX ROWID GEMINI_PRIMARY SITE 2 1 18
    INDEX RANGE SCAN GEMINI_PRIMARY SITE_I0 1 1
    TABLE ACCESS FULL GEMINI_PRIMARY SITE 3 27 594
    INDEX RANGE SCAN GEMINI_REPORTING RCAMSIT_I 1 1 5
    TABLE ACCESS FULL GEMINI_PRIMARY CAMPAIGN 3 127 2540
    TABLE ACCESS BY INDEX ROWID GEMINI_PRIMARY CAMBILLING 1 1 18
    INDEX UNIQUE SCAN GEMINI_PRIMARY CAMBILLING_U1 0 1

    duplicate thread..
    How to improve performance of attached query

  • Whats wrong with the sql query-- giving no rows selected

    i have a table audit_data with 4 columns , eff_m & end_m are declared as timestamp and the time stamp data is different for all the records
    Please advice as soon as possible as this is a production problem
    ORG_GRP_I grn_n ED_EFF_m (timestamp) ED_END_M OFV
    1 999 01-Jan-06 1 03-Aug-06 0 0
    1 999 28-Jul-06 0 04-Aug-06 1 0
    1 999 04-Aug-06 1 04-Aug-06 1 0
    1 999 04-Aug-06 0 6.08
    This query is giving no rows returned,even though there is data in database
    SELECT NVL(OFV,0)
    FROM audit_data ag
    WHERE ag.ORG_GRP_I = 1
    AND ag.GRN_N = 999
    AND (ag.ED_EFF_M,NVL(ag.ED_END_M,SYSDATE)) IN (SELECT MAX(ED_EFF_M),MAX(NVL(ED_END_M,SYSDATE))
    FROM audit_data ag2
    WHERE ag2.ORG_GRP_I= ag.org_grp_i
    AND ag2.grn_n=ag.grn_n
    AND To_Date(To_Char(ag2.ED_EFF_M,'MM/DD/YYYY'),'MM/DD/YYYY') <= TO_DATE(TO_CHAR('08/04/06','MM/DD/YYYY'),'MM/DD/YYYY')
    AND To_Date(To_Char(NVL(ag2.ED_END_M,SYSDATE),'MM/DD/YYYY'),'MM/DD/YYYY') >= TO_DATE(TO_CHAR('08/04/06','MM/DD/YYYY'),'MM/DD/YYYY'));
    This query is giving value 6.08, when made type conversions.
    what wrong with the above query.please advice
    SELECT NVL(OFV,0)
    FROM audit_data ag
    WHERE ag.ORG_GRP_I = 1
    AND ag.GRN_n = 999
    AND (to_date(to_char(ag.ED_EFF_M,'mm/dd/yyyy'),'mm/dd/yyyy'),NVL(to_date(to_char(ag.ED_END_M,'mm/dd/yyyy'),'mm/dd/yyyy'),SYSDATE)) IN
    (SELECT MAX(to_date(to_char(ED_EFF_M,'mm/dd/yyyy'),'mm/dd/yyyy')),MAX(NVL(ED_END_M,SYSDATE))
    FROM audit_data ag2
    WHERE ag2.ORG_GRP_I= ag.org_grp_i
    AND ag2.grn_n=ag.grn_n
    AND To_Date(To_Char(ag2.ED_EFF_M,'MM/DD/YYYY'),'MM/DD/YYYY') <= TO_date('08/04/2006','MM/DD/YYYY')
    AND To_Date(To_Char(NVL(ag2.ED_END_M,SYSDATE),'MM/DD/YYYY'),'MM/DD/YYYY') >= TO_DATE('08/04/2006','MM/DD/YYYY'));

    In the second query you convert a string to a date correctly using TO_DATE(string,date format)
    In the first query you try to make a char of something that already is a char, e.g. TO_CHAR('08/04/06','MM/DD/YYYY').
    The TO_CHAR functions expects either a number or a date as its first parameter. That's why it's giving you a ORA-01722.

  • How to read data from flatfile and insert into other relevant tables ? Please suggest me the query ?

    Hi to all,
    I have flat files in different location through FTP i need to fetch those files and load in the relavant table of the database.
    Please share me the query to do it ..

    You would need a ForEach Loop to iterate though the files. Initially the FTP task will pull the files from locations to a landing folder. Once thats done the ForEachLoop will iterate through files in the folder and will have a data flow task inside to transfer
    file data to tables.
    If you want a more secure option you can also use SFTP (Secured FTP) and can implement it using free WinSCP clinet. I've explained a method of doing it fo dynamic files here
    http://visakhm.blogspot.in/2012/12/implementing-dynamic-secure-ftp-process.html
    for iterating through files see this example
    http://visakhm.blogspot.in/2012/05/package-to-implement-daily-processing.html
    you may not need the validation step inside the loop in your case
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Tune the SQL Query need a Suggestion

    Hi,
    There is a view created which takes 17seconds to execute the query, When i split the query and execute each query takes .15 seconds to execute. Below it the query which i need to improve the performance of the code please need your suggestion in order to tweek so that time take for execution become less
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_1 "Product Name",
    TRIM (UPPER (serial_number_1)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_1 != 'NULL'
    AND Serial_Number_1 != 'NULL'
    AND C.Amid = A.Amid(+)
    UNION
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_2 "Product Name",
    TRIM (UPPER (serial_number_2)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_2 != 'NULL'
    AND serial_number_2 != 'NULL'
    AND C.Amid = A.Amid(+)
    UNION
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_3 "Product Name",
    TRIM (UPPER (serial_number_3)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_3 != 'NULL'
    AND serial_number_3 != 'NULL'
    AND C.Amid = A.Amid(+)
    UNION
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_4 "Product Name",
    TRIM (UPPER (serial_number_4)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_4 != 'NULL'
    AND serial_number_4 != 'NULL'
    AND C.Amid = A.Amid(+)
    UNION
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_5 "Product Name",
    TRIM (UPPER (serial_number_5)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_5 != 'NULL'
    AND serial_number_5 != 'NULL'
    AND C.Amid = A.Amid(+)
    UNION
    SELECT 'ERP' "Source",
    Imv.Bill_To "Distibutor",
    Imv.Ship_To "Reseller",
    Ship_To_City "Reseller City",
    Ship_To_State "Reseller State",
    Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'COUNTRY') "Reseller Country",
    Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'THEATER') "Reseller Theater",
    Cl.Company_Name "Customer Name",
    Cl.City "Customer City",
    Cl.State "Customer State",
    Edb2_Global.Country_Name_Theater(Cl.Country,'COUNTRY') "Customer Country",
    Edb2_Global.Country_Name_Theater(Cl.Country,'THEATER') "Customer Theater",
    Imv.So_Booked_Date "Sales Book Date",
    Imv.Ship_Date "Ship Date",
    Imv.Order_Number "Sales Order Number",
    Imv.Cust_Po_Number "PO Number",
    Cp.Item_Name "Product Name",
    Cp.Product_Serial_Number "Product Serial Number",
    TO_CHAR(Imv.contract_number)"Contract ID",
    Imv.Service_Description "Support Name",
    Imv.Service_Start_Date "Start Date",
    Imv.Service_End_Date "Expire Date",
    Imv.Header_Status "Header Status",
    Imv.Line_Status "Line Status",
    Imv.Line_Type "Line Type",
    Imv.Termination_Reason "Termination Reason",
    Cl.Location_Id "Location_id",
    cp.id "Product_id"
    FROM ib_support_contracts_mv imv,
    customer_products cp,
    customer_locations cl
    WHERE Upper (Trim (Imv.Serial_Number)) = Upper (Trim (Cp.Product_Serial_Number(+)))
    AND Cp.Location_Id = Cl.Location_Id(+)
    There is a union for each and every query, Please suggest how to tweek
    Thanks
    Sudhir

    Try
    select distinct a.*
    from (SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_1 "Product Name",
    TRIM (UPPER (serial_number_1)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_1 != 'NULL'
    AND Serial_Number_1 != 'NULL'
    AND C.Amid = A.Amid(+)
    union all
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_2 "Product Name",
    TRIM (UPPER (serial_number_2)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_2 != 'NULL'
    AND serial_number_2 != 'NULL'
    AND C.Amid = A.Amid(+)
    union all
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_3 "Product Name",
    TRIM (UPPER (serial_number_3)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_3 != 'NULL'
    AND serial_number_3 != 'NULL'
    AND C.Amid = A.Amid(+)
    union all
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_4 "Product Name",
    TRIM (UPPER (serial_number_4)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_4 != 'NULL'
    AND serial_number_4 != 'NULL'
    AND C.Amid = A.Amid(+)
    union all
    SELECT 'Parature' "Source",
    NULL "Distibutor",
    reseller_name "Reseller",
    NULL "Reseller City",
    NULL "Reseller State",
    A.Country "Reseller Country",
    DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
    NULL "Customer Name",
    NULL "Customer City",
    NULL "Customer State",
    NULL "Customer Country",
    NULL "Customer Theater",
    NULL "Sales Book Date",
    NULL "Ship Date",
    c.sales_order_number "Sales Order Number",
    C.Po_Number "PO Number",
    controller_model_number_5 "Product Name",
    TRIM (UPPER (serial_number_5)) "Product Serial Number",
    c.contract_id "Contract ID",
    product_name "Support Name",
    TO_DATE (c.contract_purchase_date) "Start Date",
    TO_DATE (c.contract_expiration_date) "Expire Date",
    NULL "Header Status",
    NULL "Line Status",
    NULL "Line Type",
    NULL "Termination Reason",
    NULL "Location_id",
    NULL "Product_id"
    FROM edb_assets c,
    edb_accounts a
    WHERE controller_model_number_5 != 'NULL'
    AND serial_number_5 != 'NULL'
    AND C.Amid = A.Amid(+)
    union all
    SELECT 'ERP' "Source",
    Imv.Bill_To "Distibutor",
    Imv.Ship_To "Reseller",
    Ship_To_City "Reseller City",
    Ship_To_State "Reseller State",
    Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'COUNTRY') "Reseller Country",
    Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'THEATER') "Reseller Theater",
    Cl.Company_Name "Customer Name",
    Cl.City "Customer City",
    Cl.State "Customer State",
    Edb2_Global.Country_Name_Theater(Cl.Country,'COUNTRY') "Customer Country",
    Edb2_Global.Country_Name_Theater(Cl.Country,'THEATER') "Customer Theater",
    Imv.So_Booked_Date "Sales Book Date",
    Imv.Ship_Date "Ship Date",
    Imv.Order_Number "Sales Order Number",
    Imv.Cust_Po_Number "PO Number",
    Cp.Item_Name "Product Name",
    Cp.Product_Serial_Number "Product Serial Number",
    TO_CHAR(Imv.contract_number)"Contract ID",
    Imv.Service_Description "Support Name",
    Imv.Service_Start_Date "Start Date",
    Imv.Service_End_Date "Expire Date",
    Imv.Header_Status "Header Status",
    Imv.Line_Status "Line Status",
    Imv.Line_Type "Line Type",
    Imv.Termination_Reason "Termination Reason",
    Cl.Location_Id "Location_id",
    cp.id "Product_id"
    FROM ib_support_contracts_mv imv,
    customer_products cp,
    customer_locations cl
    WHERE Upper (Trim (Imv.Serial_Number)) = Upper (Trim (Cp.Product_Serial_Number(+)))
    AND Cp.Location_Id = Cl.Location_Id(+)) a
    Edited by: HuaMin on May 9, 2012 2:58 PM

  • My itunes will not open in Windows Vista, I have tried everything suggested on the apple website, there is some type of plug-in issue..can someone please help me?

    Hello, 
    I need help! My itunes will not open in Windows Vista. I have tried everything suggested by the apple website. Even when I open itunes in safe mode, it still will not allow me to continue. I am assuming when it says something about Plug-ins that has something to do with the problem. Can anyone help me?

    Thanks King_Penguin for taking time to read and reply. 
    I just purchased this movie on Thursday, May 15, so just a few days ago.  I have never had any trouble whatsoever since I have been in Vietnam.  I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase. 
    Sorry, I don't quite understand what you mean by studios and different versions.  Could you please explain? 
    I checked my purchased list in my purchase history under my account and there are no hidden items. 

  • When i tried to update my apps in the app store, i coudn't update because of particular error is irritating me whenever i try to update..[There was an error in the app store please try again later.(20)] Any one suggest me to fix this error soon.

    When i tried to update my apps in the app store, i coudn't update because of particular error is irritating me whenever i try to update..[There was an error in the app store please try again later.(20)] Any one suggest me how to fix this error soon.

    Yea i deleted all the apps which was purchased earlier with old Apple id ..and nw i installed all apps with my new apple id...Tanq for helping guys (Linc Davis and Dah•veed ).

  • When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?

    When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?

    Hello, ksb2. 
    Thank you for visiting Apple Support Communities.
    We are investigating this issue. This article will be updated as more information becomes available.
    iCloud: iCloud Control Panel setup cannot be started
    http://support.apple.com/kb/TS5178
    Cheers,
    Jason H.

  • My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

    My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

    It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe.  Do not attempt to use the phone, but take it to Apple for evaluation.

Maybe you are looking for

  • Linked PDF files won't open in Preview

    I have a a few Table of Content PDF files linked to a large number of PDF files in subdirectories (the old AGES library system).  When I try to open the linked file in Preview i get an error saying that I don't have permission to open this file.  Ado

  • How to buy a 16 gb white iPhone 3gs from U.S to Brazil?

    Hi! i`m from brazil and i want an iphone so much, but here is so expensive!it's almost $950, there is any way I can buy from U.S with the same price of the apple store? Does anyone understand me? It`s very difficult to do this?? Please! I need help o

  • AIA Async delayed response pattern :RequestorABCS remains in suspended mode

    Hi All, I am trying to implement the Async delayed response pattern for one of my integration flows. After there is a fault on providerABCS it creates the responseEBM along with fault message in it and invokes the ResponseEBS. The ResponseEBS shows a

  • Add pdf file into NUMBERS?

    How do I simply add a small pdf file into Numbers. I'm thinking so I'll see a 'pdf' icon in the cell - click it - and the pdf file opens. I hope you can do this in NUMBERS! Can I? Thanks, Larry

  • Weblogic.system.weight

    Hi,           I have a question about the property : weblogic.system.weight...........           I have defined this in the per server properties file on the shared           drive, and I have a cluster of 2 servers.......however, this setting