Suggested number of print pages

Is there a limit on the number of print pages RH9 can publish? I know it's gone up from 100, but I thought I read 700-800 pages. I can't seem to get past about 350 pages.
Windows 7, RH9, Word 2010

There is no specific limit that I am aware of. It's more about the content and your machine. Lots of images might not help.
Generate to your local drive if you are not already doing that.
350 should be OK and sometimes one topic can cause issues. Is it stalling at the same point? Have you tried using two layouts each with one half? At worst you may have to have two layouts and then combine them back in Word but trying that might identify a rogue topic if one layout still gives grief.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

  • XSL-FO for Standard Purchase Order, doesn't print page number

    Hi,
    I worked on XSL-FO code to custom the PDF output for Standard PO. Everything works great: I added company logo (in a different position of the standard commented code <!-- Too easy just to uncomment... :-)--> ), i created new attribute sets to highlight some elements on the print, I added a footer with company details and document type and number (instead of placing this in the header, the costumer didn't like it where it was..)
    OK. BUT: the page number at the bottom on the right isn't printed anymore. For example: if the PO page is n.1 of 2 pages, it comes only '12' and not Page 1 of 2. So i tought not to use the original template (tihs one)
    <!-- Template for displaying the page numbers -->
    <!-- bug#3836856: Template for displaying the page numbers at right bottom of the page -->
    <xsl:template name="pageNumber">
         <xsl:variable name="po_page">
         <xsl:value-of select="$BOILER_PLATE_MESSAGES_OBJ[MESSAGE='PO_FO_PAGE'][1]/TEXT"/>
         </xsl:variable>
         <!-- Get the String before the PAGE_NUM token -->
         <xsl:variable name="string_before_page_num">
         <!-- <xsl:value-of select="substring-before($po_page,'&amp;PAGE_NUM')"/>-->
         <xsl:value-of select="substring-before($po_page,'Pag.;PAGE_NUM')"/>
         </xsl:variable>
         <!-- Get the String after the PAGE_NUM token -->
         <xsl:variable name="string_after_page_num">
         <!-- <xsl:value-of select="substring-after($po_page,'&amp;PAGE_NUM')"/>-->
         <xsl:value-of select="substring-after($po_page,'/ ;PAGE_NUM')"/>
         </xsl:variable> ......
    but inseriting a select just where I want the page num to be displayed (see code)
    <fo:block xsl:use-attribute-sets="test_style" >
    <xsl:value-of select="$BOILER_PLATE_MESSAGES_OBJ[MESSAGE='PO_FO_PAGE'][1]/TEXT"/>
                                                      </fo:block>
    but this gave me as result 'Page &PAGE_NUM of &END_PAGE'.
    Where did I do wrong?? It's like the PO_FO_PAGE message is not dinamically insered in the PDF. Hope I've been clear enough and somene can help me. Thaks in advance, Michele

    Hi Michele:
    I can check out for you how to print page number in XSL-FO (There is an O'Reilly) book, but I think I help you better by recommending a different strategy - Don't write XSL-FO stylesheets. While Purchasing does not support RTF templates you can still write RTF templates and convert them to FO using the XML Publisher Template Builder for Word.
    Download the matching Template Builder for Word (5.0) or XML Publisher Desktop 5.5 (includes the Template Builder) patch and then Create your template as an RTF template.
    You can then EXPORT the template as XSL-FO stylesheet and upload as to Purchasing AS LONG AS THE VERSION OF THE DESKTOP and E-Businees Suite XML Publisher MATCH.
    If you still want to write XSL stylesheet, you can just use the Template Builder to generate you the code and paste the code (e.g. for page numbers) into your stylesheet.
    By the way - Purchasing will support RTF templates in future versions...
    Hope that helps,
    Klaus

  • On Yosemite how do I get Pages to print the page number on every page, not just on alternate ones?

    I  only changed from Windows to an iMac earlier this year (now on Yosemite), but cannot get Pages to print the page number on every page;  it seems only to do it on alternate pages.

    Jeff,
    I do NOT understand your positive attitude. If someone has a problem with Numbers in Yosemite, you tell them to resurrect a pre-Yosemite version of Numbers.
    The VIEW LAYOUT command is basic and critical to Numbers; how could Apple over-look such an important function in Yosemite ... ???
    Joe

  • Number on First Printed Page

    Hi All,
    I Hope you all fine!!!
    Guys, need choice in TRIAL BALANCE report on field where can I assign a initial number for first page, like exist in DOCUMENT JOURNAL (see picture attached)...
    Anyone knows how can I modified the default layout TRIAL BALAANCE to solve this?

    Hi
    You can add the page no in your PLD or Crystal Report is possible .  It is not possible to do the modification in Standard SAP Business One as Mr. Kennedy says.
    With Regards
    Balaji Sampath

  • How can i define the number of pdf-pages that will be print on each page?

    Hey everyone,
    im currently working on a handout for my prensentation.
    That handout will be downloadable for everyone.
    So, here is the problem:
    I have 24 pages in pdf. I want them to fit on 4 printed pages.
    In order to have everyone exactly 6 pdf-pages each printed page,
    it'd be nice to have a pre-setting for that.
    I found some settings for duplex-print but thats not what i need.
    Thank You!
    Jo

    ne, das weiß ich. mir gehts darum wie ich das als standard-druckeinstellung speichern kann...

  • How can I find the printed page number in an ibook app?

    I want to go to printed page 129, I do not know what the corresponds to in my ibook.

    There isn't any correspondence. I seem to recall that Amazon added that feature to the Kindle app but I haven't checked lately.

  • Printing page numbers in an ALV report with multiple grids

    Hi,
    I have developed a report using OO ALV GRID. The output is having multiple grids navigated using a menu button appended to the standard tool bar
    (Ref report: BCALV_GRID_07). On navigation, we are able to display specific titles when each grid is displayed.
    When we print those individual pages (the grids), we are able to print the page numbers and the title for the first grid but when we display the next grid and print, we are unable to initialise the page number
    and print specific title. The page numbers continues from the last printing.
    I am looking at identifying the grid when the print event - PRINT_TOP_OF_PAGE is triggered so that a grid specific title can be printed and also page number initialised.
    Any suggestions is highly appreciated.
    Thanks.
    Mani.

    You cannot have one event for all the grids as you cannot identify for which grid the event has fired. You need to activate the event for each of the grid and handle the code independently.
    regards,
    Ravi
    Note - Please mark the helpful answers

  • How to print page numbers in adobe form

    Hi,
    Can anybody tell me how to print page numbers in adobe form.
    Thanks in advance
    Chaitanya

    Hi,
    Yes the field page n of m is used normally for printing page numbers. But it won't display the current page of total pages by itself. You have to set the run time property to n (current page ) and m (Total number of pages). Carefully select the # (current page ) and ## (Total number of pages). Hope this works for you.
    My requirement is to have the user control on current page. For Example:
    Example for a Invoice with 5 PO items (stands on 2 pages) :
    1st  page is the letter : no page number
    2nd page is the 1st page of the 1st copy of the invoice : we should read u201C1 / 2u201D
    3rd page is the 2nd page of the 1st copy of the invoice : we should read u201C2 / 2u201D
    4th page is the 1st page of the 2nd copy of the invoice : we should read u201C1 / 2u201D
    5th page is the 2nd page of the 2nd copy of the invoice : we should read u201C2 / 2u201D
    Presently i cam getting the current page number for page 4th as 3 / 2 and for 5th page 4 / 2. I could able to control the total number of pages from print program. But when i am printing the second copy (4th and 5th pages), I couldn't able to control the current page number. I need to initialize the Current page count (4th page ) as 1.
    I have used the follwing java scripting:
    this.rawValue = wv_pages - xfa.layout.page(this)
    where wv_pages is total no of pages calculated from print program.
    Please help me in this regard with some formcal or java scripting conditions.
    Thank You,
    Regards,
    Naresh.

  • How to print Column Labels on each print page of an ALV report

    Hi,
    I have an ALV report which is of 10 print pages.
    I need to print Column Labels on each print page.
    How it is possible.
    Plz write the solution
    Narendra

    Hi Narendra
    try this code.
    reward pts if help.
    Deepanker.
    *& Report  ZDEMO_ALVGRID_EDIT                                          *
    *& Example of a simple ALV Grid Report                                 *
    *& The basic ALV grid, Enhanced to display specific fields as          *
    *& editable depending on field value                                   *
    REPORT  ZDEMO_ALVGRID_EDIT                 .
    TABLES:     ekko.
    TYPE-POOLS: slis.                                 "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
      field_style  TYPE lvc_t_styl, "FOR DISABLE
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    *ALV data declarations
    DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE.
    DATA: it_fieldcat TYPE lvc_t_fcat,     "slis_t_fieldcat_alv WITH HEADER LINE,
          wa_fieldcat TYPE lvc_s_fcat,
          gd_tab_group TYPE slis_t_sp_group_alv,
          gd_layout    TYPE lvc_s_layo,     "slis_layout_alv,
          gd_repid     LIKE sy-repid.
    *Start-of-selection.
    START-OF-SELECTION.
      PERFORM data_retrieval.
      PERFORM set_specific_field_attributes.
      PERFORM build_fieldcatalog.
      PERFORM build_layout.
      PERFORM display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    FORM build_fieldcatalog.
      wa_fieldcat-fieldname   = 'EBELN'.
      wa_fieldcat-scrtext_m   = 'Purchase Order'.
      wa_fieldcat-col_pos     = 0.
      wa_fieldcat-outputlen   = 10.
      wa_fieldcat-emphasize   = 'X'.
      wa_fieldcat-key         = 'X'.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'EBELP'.
      wa_fieldcat-scrtext_m   = 'PO Item'.
      wa_fieldcat-col_pos     = 1.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'STATU'.
      wa_fieldcat-scrtext_m   = 'Status'.
      wa_fieldcat-col_pos     = 2.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'AEDAT'.
      wa_fieldcat-scrtext_m   = 'Item change date'.
      wa_fieldcat-col_pos     = 3.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'MATNR'.
      wa_fieldcat-scrtext_m   = 'Material Number'.
      wa_fieldcat-col_pos     = 4.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'MENGE'.
      wa_fieldcat-scrtext_m   = 'PO quantity'.
      wa_fieldcat-col_pos     = 5.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'MEINS'.
      wa_fieldcat-scrtext_m   = 'Order Unit'.
      wa_fieldcat-col_pos     = 6.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'NETPR'.
      wa_fieldcat-scrtext_m   = 'Net Price'.
      wa_fieldcat-edit        = 'X'. "sets whole column to be editable
      wa_fieldcat-col_pos     = 7.
      wa_fieldcat-outputlen   = 15.
      wa_fieldcat-datatype     = 'CURR'.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'PEINH'.
      wa_fieldcat-scrtext_m   = 'Price Unit'.
      wa_fieldcat-col_pos     = 8.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
    ENDFORM.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    FORM build_layout.
    Set layout field for field attributes(i.e. input/output)
      gd_layout-stylefname = 'FIELD_STYLE'.
      gd_layout-zebra             = 'X'.
    ENDFORM.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    FORM display_alv_report.
      gd_repid = sy-repid.
    call function 'REUSE_ALV_GRID_DISPLAY'
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
           EXPORTING
                i_callback_program      = gd_repid
               i_callback_user_command = 'USER_COMMAND'
                is_layout_lvc               = gd_layout
                it_fieldcat_lvc             = it_fieldcat
                i_save                  = 'X'
           TABLES
                t_outtab                = it_ekko
           EXCEPTIONS
                program_error           = 1
                OTHERS                  = 2.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
      SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
       UP TO 10 ROWS
        FROM ekpo
        INTO  CORRESPONDING FIELDS OF TABLE it_ekko.
    ENDFORM.                    " DATA_RETRIEVAL
    *&      Form  set_specific_field_attributes
          populate FIELD_STYLE table with specific field attributes
    form set_specific_field_attributes .
      DATA ls_stylerow TYPE lvc_s_styl .
      DATA lt_styletab TYPE lvc_t_styl .
    Populate style variable (FIELD_STYLE) with style properties
    The NETPR field/column has been set to editable in the fieldcatalog...
    The following code sets it to be disabled(display only) if 'NETPR'
    is gt than 10.
      LOOP AT it_ekko INTO wa_ekko.
        IF wa_ekko-netpr GT 10.
          ls_stylerow-fieldname = 'NETPR' .
          ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
                                                 "set field to disabled
          APPEND ls_stylerow  TO wa_ekko-field_style.
          MODIFY it_ekko FROM wa_ekko.
        ENDIF.
      ENDLOOP.
    endform.                    " set_specific_field_attributes
    pls reward pts is help,

  • Printing Page Numbers - From To

    Please can you help me.
    I am exporting a Crystal Report to PDF per customer through vb code.
    I need to print a maximum number of pages (that will fit in an envelope e.g. 20) and then continue printing his data into a second PDF where it left off.
    Therefore I am trying to print out the crystal report in my VB.NET code by specifying a "Page From" and a "Page To".  How can I do this??
    For example I want to be able to say Print out pages 1 to 20
    Then print out 21 to 40 but the page count in the 2nd report should say (1 to 20)
    Thanks
    Ric

    Don,
    Thanks for your help.
    Your solution to resetting page counts in the report might be part of a solution...
    First of all - How can I reset the page counts within a formula?
    However my problem is a little more complex...
    In my VB code, I output the Crystal Report as a PDF file.
    However in the example I gave, where the customer has 30 pages, I need to generate 2 PDF files.
    The first PDF will be called CUSTXYZ_1.PDF (contains pages 1 to 20).
    The second PDF will be called CUSTXYZ_2.PDF (contains pages 21 to 30 but numbered as 1 to 10).
    I still need to find a way to output one report as 2 PDFs with pages 1 to 20 in the first pdf
    followed by 21 to 30 in the 2nd PDF.
    Maybe in my vb code i need to find a way to say:
    Print Pages 1 to 20 in one PDF
    Then Print Pages 21 to 40 in the second PDF
    I am not sure how I can do that...
    Any more ideas??
    Ric

  • LASERJET 1160 PRINTER RUNS A BLANK PAGE BETWEEN EVERY PRINTED PAGE AFTER UPGRADING TO WINDOWS 8.1

    Laserjet 1160 printer runs a blank page between every printed page after upgrading to Windows 8.1

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How to allow domain users to customize  Adobe PDF  printer page size in Printer Preferences

    Hi
    I am able to customize  Adobe PDF  printer page size in Printer Preferences in admin login but not able to customize  Adobe PDF  printer page size in domian users login...
    can I have a solution to customize  Adobe PDF  printer page size in domin user login

    WOW! I was amazed to see that within minutes of posting my initial thread, I tried something that works.
    Apparently, the only way is will actually convert is if you select the regular Print option in the File tab. Then, change the Printer to Adobe PDF & the Paper Size to 11x17. It also worked for 36"x48" becuase I created a custom size named "Poster", so I changed the paper size to Poster & it worked!
    I hope this helps someone. I searched for an existing forum on this issue off & on for MONTHS before creating this thread. If anyone has any suggestions why the Adobe PDF tab /PDF Maker wouldn't work, I'd like to know.

  • How to print page numbers like 'Page 2 of 10' on an ALV report

    Hi,
    I've seen a few threads regarding this, but haven't seen any code that actually works. 
    What I'd like to do is print page x of y (i.e. Page 2 of 10) on an ALV report once the report is printed.
    Is this actually possible?  If so, what are the steps and coding required? 
    I greatly appreciate your help experts!
    Mark

    Hi Mark,
    I think there is no better way than calculate it before doing the output. If you do not have extra-new-page, the total number of pages may be calculated as the number of lines displayed divided by lines on one page - this will depend on the lines used for top-of-page and end-of-page. Also filters and subtotals could not be used.
    An other approach could be to read the current page number in end-of-list event and then scan the whole list using READ LIST and MODIFY LIST in each page top accordingly.
    Because it is decades ago I printed a list last time I will never have the chance to try.
    Regards,
    Clemens

  • How to print page numbers on physical pages conditionally?

    Hi,
    my report has a single logical page comprising of 3 reapeating frames , each getting printed on 3 different physical pages. I need to print page number at the bottom of the page in the case of two repeating frames while on the side of the page in the third case. How do I do this?
    TIA
    Ranjit

    i think u only need to say page break before on ur third repeating frame and ur problem is solve.
    repeating frame 1 and 2 on the firstpage getting page 1 and repeating 3 on page 2.
    cheers.

  • How to print page no/total pges in report programing?

    how to print page no/total pges in report programing?

    Hi
    This is an example:
    In TOP-OF-PAGE you can write:
    WRITE: SY-PAGNO, '/', '-----'.
    When the program has finished to print all data, run a routine like this:
    Declare a variable
    DATA: L_PAGE_COUNT(5) TYPE C,
          V_LINE TYPE I. "The line where page number is written
    * In my example I suppose the page number is always
    * written in the first row of the page.
    V_LINE = 1.
    *  Copy this code to the end of program
    *  Page count will be printed on each page here
      WRITE sy-pagno TO l_page_count LEFT-JUSTIFIED.
      DO sy-pagno TIMES.
        READ LINE V_LINE OF PAGE sy-index.
        REPLACE '-----' WITH l_page_count INTO sy-lisel.
        MODIFY CURRENT LINE.
        ADD 1 TO sy-index.
      ENDDO.
    Max

Maybe you are looking for