Suggested template workspace

I'm wondering if anyone can point me to a suggested template TestStand workspace. I'm starting a new task and want to have some type of organization. Am I correct, first of all, that I would want to start out with a workspace, then add a project to it? Would I ever have more than one project. If not, why wouldn't I just have the project as the top level. I'm starting my new task in TestStand 3.5
In a related question ...
I inherited a TestStand 3.1 workspace file (.tsw) but I'm looking at it in TestStand 3.5. It contains a config file (TS_Config) - in it are a number of .ini files, a .log file, and the file TS_Config.tpj
another .tpj file entitled TS_OI_FF_User.tpj - in it are three files (.exe, .ico, .uir)
Finally, another .tpj exists, that contains a num of .uir files, a .seq, a folder for CodeModules (containing a dll).
I have two questions about this...
(1) What is a .tpj file?
(2) When I right-click on the workspace, all I can insert is a project file (.tps), and from there I can only add folders or files. Is the folder concept pointing to the actual folder on my c-drive or is this like the LabVIEW folder which is not pointing to the actual folder?

In response to your questions:
(1) What is a .tpj file?
A TPJ file is a TestStand Project File. TestStand uses different hierarchical levels in order to organize files. The highest level is the Workspace. Workspaces contain Projects. Project can contain files or folders. These types of files help developers organize their files throughout development and later deploy their systems.
(2) When I right-click on the workspace, all I can insert is a project file (.tps), and from there I can only add folders or files. Is the folder concept pointing to the actual folder on my c-drive or is this like the LabVIEW folder which is not pointing to the actual folder?
The folder isn't an actually folder on your hard drive. This folder only lives inside the Project file and can contain files located in many different folder. Therefore, it is very similar to the LabVIEW Project folder.
Let me know if this answers your questions.
Regards,
Santiago D

Similar Messages

Technical Spec Template

Hi everyone,
Does anyone have a 'real life' template for an XI technical specification I.e. one that they have used (and understood) in the real world. I've got a copy of the suggested template from the Roadmap but quite frankly it looks more like a documentation exercise (one created after the development has been done) rather than a mechanism for conveying the technical design to the developer.
Functional spec template (XI oriented) would also be appreciated.
Would really appreciate if you could email proposed templates to [email protected]
Thanks in advance
Nigel

Hi narmada,
Below are the standards for Tech specs
1.1 Development Attributes
Program Name:
Title:
Application:
Development Class:
Message Class:
Program Type:
Execution Mode:
Schedule Frequency:
Variant:
1.2 Program Functionality
1.3 Output Fields
Output Label
Related SAP table-field (if any)
Length
Output Characteristics
1.4 Proposed Solutions
1.5 Solution to be implemented
1.6 Reasons of selection/rejection
1.7 Pseudo-Code / Flow Logic of the selected solution
1.8 Selection Screen
1.9 Database Tables Used
Table Name
Table Description
How the table is used in the program
1.10 External Files Used
1.10.1 External File Layout <file name>
1.11 Components External to Program Used
1.12 Error Conditions
1.13 Key Technical Test Conditions
1.14 Sample Test Data
1.15 Assumptions
1.16 Comments
regards,
amit m.

Predefinied content using room extensions...

Hi All,
We've been trying to create a new collaboration room template from scratch, including the use of predefined content. Here is what we tried to do (somewhat simplified):
- Created a default folder hierarchy with some initial content (room_extensions/cm_stores/TEMPLATES/<workspace>/documents/)
- Created several KM iViews which are supposed to point to a specific path in the above created default folder hierarchy.
- During room template creation a room extension (cmRoomExtensionSP2FP) called Documents has been created which specifies the template, workspace and workspace path. The latter parameter can be used in mapping the documents patch to the StartUri iView Parameter. However, here our problem starts. This way of working allows you to only map to the root of the created CM store. Thus, in our case, the iView will be pointing to cm_stores/documents/workspaces/documents (workspace name).
So, the question is how we can achieve access to a certain folder or document which isn't located in the root? Did we perhaps miss something? Any suggestions would be highly appreciated.
Regards,
Frodo

Hi Frodo,
I am trying to create a default folder hierarchy with some initial content, please help me how can i do this.
Thanks.
Marysol

Help needed on how to set up Global Nav in Dreamweaver so that changes need to be made only once and will be reflected throughout the site.

Hi,
I've created a site with global navigation across the top (drop down menus) and some global buttons on the left side. Is there a way to code this type of global navigation in Dreamweaver so that people making changes to the site need only make them once (not on every page!) and have them reflected throughout the site? I'm using Dreamweaver MX to create the site.
Thanks to this forum I know that Server Side Includes is a way to handle this but I'd like to use Dreamweaver if possible.
Thanks!

As Murray suggested, templates are the way to go (though not really recommended for a fairly large site) - here's a link to some help docs to help you get started.
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WScbb6b82af5544594822510a94ae8d65-7acda .html
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

Naming conventions / Naming conventions for Trading Partner Management

Hello Experts,
Can any one share the Naming conventions / Naming conventions document for Trading Partner Management ?
Thanks
Saurabh

Hey Saurabh,
We usually go with the name and description for partners ,
Below blog might help
ISA and GS segments mapping - Value mapping v/s Predefined TPM UDFs - II
Suggestions-
Template - TM_Description
Function Profiles - FP_Description
Partners - TP_Description or PartnerName
Agreement - TPA_Description
Code List - CL_Description
Property key - lower case, description separated by dot (.) ( eg. seg.sep)
TPM Export file - Config_description .tpm
Regards,
Pooja

Failed to load following objects error

--Thread moved from Forms
Hi all,
I am working on Form builder 10g and our Applications version is 12.1.3.I happen to develop a form by taking template.fmb from AU_TOP and worked on my requirement,everything works fine.Only thing missing is,when i open the form which i developed in applications i don't see Oracle logo,instead i get some other logo and some other functionalities are missing.
My observation:
when i open the .err file while compiling with frcmp_batch command i see the below errors.
FRM-18108: Failed to load the following objects.
Source Module:APPSTAND
Source Object: STANDARD_PC_AND_VA
Source Module:APPSTAND
Source Object: STANDARD_TOOLBAR
Source Module:APPSTAND
Source Object: STANDARD_CALENDAR
Compiling package specification APP_CUSTOM...
   No compilation errors.For the above things,i added Template.fmb & APPSTAND.fmb to the forms_path but still i am getting the same errors and i won't see my form with oracle logo.
So,somehow i did a hunch and find the solution myself..
instead of using Template.fmb i used APPSTAND.fmb which is working fine for me.However,my doubt is in every single tutorial i saw they mentioned to use Template.fmb while developing the form from scratch.
Can anyone explain me why APPSTAND.fmb is working for me instead of Template.fmb
Any help is appreciated,
Thanks in advance!!

Thanks all for your replies..I followed your suggestions,i saw the forms_path under registry editor.The path which is over there points to all the required pll's and .fmb files.There are like 1000 objects.So,now coming back to developing the form
1.Using TEMPLATE.fmb(err file)
FRM-18108: Failed to load the following objects.
Source Module:APPSTAND
Source Object: STANDARD_PC_AND_VA
Source Module:APPSTAND
Source Object: STANDARD_TOOLBAR
Source Module:APPSTAND
Source Object: STANDARD_CALENDAR
Compiling package specification APP_CUSTOM...
   No compilation errors.
Compiling package specification APP_CUSTOM...
   No compilation errors.
Compiling package body APP_CUSTOM...
   No compilation errors.
Compiling WHEN-WINDOW-RESIZED trigger on form...
   No compilation errors.
Compiling FOLDER_ACTION trigger on form...
   No compilation errors.
Compiling FOLDER_RETURN_ACTION trigger on form...
   No compilation errors.
Created form file RHCCUSTALLOWANCEDET.fmxWhat's missing here when i open the form in applications is Oracle Logo and some standard functionalities.
2.Using APPSTAND.fmb (err file)
Compiling package specification APP_CUSTOM...
   No compilation errors.
Compiling package specification APP_CUSTOM...
   No compilation errors.
Compiling package body APP_CUSTOM...
   No compilation errors.
Compiling EXPORT trigger on form...
   No compilation errors.
Compiling CLOSE_THIS_WINDOW trigger on form...
   No compilation errors.
Compiling WHEN-FORM-NAVIGATE trigger on form...
   No compilation errors.
Created form file RHCCUSTALLOWANCEDET.fmxIn this case,everything works normal.
As per your suggestions,TEMPLATE.fmb should work for me not APPSTAND.So,where am i doing wrong?
@Srini:Yes,everything is as per the doc which you suggested
@Hussein:Pls see the above explanation
Kindly note that the above error report is while compilation using frmcmp_batch command and not in the Form Builder.
My Observation:
In the Object groups section,when using TEMPLATE.fmb STANDARD_PC_AND_VA,STANDARD_TOOLBAR,STANDARD_CALENDAR are missing.But when i use APPSTAND.fmb these object groups are present.
Can i copy paste these object groups or doing like that damages my Applications?
Edited by: sandy on Dec 21, 2011 11:29 AM

Can't install eclipse plugins

Hey guys.
I've just installed arch since yesterday. pacmanning & configuring xorg and a DE (xfce went pretty smooth), also installing a jre and eclipse went nice.
But now, i want to install many plugins for eclipse. (EMF, subclipse, phpeclipse,...)
So i add the urls, i select the ones i want, i accept the licences, i choose mirrors, the files download, i click "install all" when the warning prompts me that the plugins are unsigned.
But then it fails, no matter which plugin, the problem is always pretty similar:
Unable to complete action for feature "Eclipse Modeling Framework (EMF) Documentation" due to errors.
Unable to create file "/opt/eclipse/plugins/org.eclipse.emf.doc_2.2.1.v200609210005/META-INF/MANIFEST955702245598.MF".
[/opt/eclipse/plugins/org.eclipse.emf.doc_2.2.1.v200609210005/META-INF/MANIFEST955702245598.MF (No such file or directory)]
Unable to create file "/opt/eclipse/plugins/org.eclipse.emf.doc_2.2.1.v200609210005/META-INF/MANIFEST955702245598.MF".
[/opt/eclipse/plugins/org.eclipse.emf.doc_2.2.1.v200609210005/META-INF/MANIFEST955702245598.MF (No such file or directory)]
when trying subclipse, i the error said something like "permission denied when writing opt/eclipse/plugins/org.eclipse.sublipse......TMP"
i run eclipse as normal user (dieter) in an x session as normal user (dieter)
[root@arch /]# ls -alh opt/
total 24K
drwxr-xr-x 6 root root 4.0K Apr 12 22:25 .
drwxr-xr-x 18 root root 4.0K Apr 12 19:53 ..
drwxr-xr-x 5 root root 4.0K Apr 12 22:03 eclipse
drwxr-xr-x 9 root root 4.0K Apr 12 22:25 java
drwxr-xr-x 3 root root 4.0K Apr 12 22:25 mozilla
drwxr-xr-x 10 root root 4.0K Aug 27 2005 xfce4
[root@arch eclipse]# ls -alh opt/eclipse
total 416K
drwxr-xr-x 5 root root 4.0K Apr 12 22:03 .
drwxr-xr-x 6 root root 4.0K Apr 12 22:25 ..
-rw-r--r-- 1 root root 59 Oct 8 2006 .eclipseproduct
-rw-r--r-- 1 root root 12K Oct 8 2006 about.html
drwxr-xr-x 2 root root 4.0K Apr 12 22:02 configuration
-rwxr-xr-x 1 root root 29K Oct 8 2006 eclipse
-rw-r--r-- 1 root root 25 Oct 8 2006 eclipse.ini
-rw-r--r-- 1 root root 17K Oct 8 2006 epl-v10.html
drwxr-xr-x 11 root root 4.0K Apr 12 22:02 features
-rw-r--r-- 1 root root 8.9K Oct 8 2006 icon.xpm
-rwxr-xr-x 1 root root 260K Oct 8 2006 libcairo-swt.so
-rw-r--r-- 1 root root 6.4K Oct 8 2006 notice.html
drwxr-xr-x 24 root root 8.0K Apr 12 22:03 plugins
-rw-r--r-- 1 root root 33K Oct 8 2006 startup.jar

okay, it worked.. sort off..
i had to do those commands on /opt/eclipse, not just on /opt/eclipse/plugins, because some data had to be written in other subdirectories then just plugins.
But now my problem is: i'm in an x-session as user dieter, i start eclipse, so it runs as user dieter, i install plugins, i'm prompted if i want to restart ecliipse, i choose yes.
After that: eclipse prompts me for what my workspace should be, it suggests: /root/workspace?? And when checking out the "new software" thing, most of my url's for plugins are gone?? It's like eclipse is running as user root, instead of user dieter? (since it doesn't use my settings, but those of user root?) Even when starting a new x-session and launching eclipse again, it keeps on behaving like this :?
However it's not running as root, here's a piece of ps aux
dieter 3270 0.0 1.5 9648 1748 tty1 S 15:12 0:00 /opt/eclipse/eclipse
dieter 3271 11.6 65.5 527120 72080 tty1 Sl 15:12 0:45 /opt/java/bin/java -Xms40m -Xmx256m -jar /opt/eclipse/startup.jar -os linux -ws gtk -arch x
so why does it behave so funny, and how do i fix it?

Regarding Bridge CS5 Keyword transfer

Hi all,
I am using an iMAC, running 10.7.2.
I am getting a new iMAC and would like to know how to find and transfer the Metadata/Keywords from one system to another?
Many thanks,
HD

how to find and transfer the Metadata/Keywords from one system to another?
You can use the little icons for wing menu (top right in both panels) and choose export, save it to a proper place you can copy to the new iMac and choose import on your new machine.
By default the user library in OSX Lion is hidden but is easy to retrieve it (do a google search if you haven't done already so).
In the user library are all your customized settings.
username/library/application support/ Adobe.
inhere:
Bridge CS5 folder containing keyword list, output module user templates, workspaces and specified batch rename settings
XMP folder containing your metadata templates.
Also be sure to have saved your PS custom settings (actions, tools, brushes etc.)
In the same given path as before there is folder called Adobe Photoshop CS5 and this contains the folder presets, that should have your custom saved settings in it.

Lab Manager 3 reports - SQL Queries - looking for some help

Hi Everyone
Our management has asked for metrics on the use of Lab Manager so I started looking around and noticed that none of the 3rd party tools support Lab Manager. I started to poke around the SQL database and managed to extract some info however my SQL knowledge is very limited. I am wondering if anyone out there has written their own queries or can help me sort some things out.
I thought I would start a community thread as i'm sure I am not the only one out there looking to do this.
This first query gives you the usernames and deploys in order
SELECT *
FROM Jobs
WHERE (starttime > '02/01/2007') AND (object NOT LIKE 'VirtualRouter%') AND (operation LIKE 'JOB_Deploy') AND (object_type_full = 'Virtual Machine') and (status <> 3)
This query gives you the daily deployments per organization
SELECT convert(char(10), starttime, 101) as MonthYear, count(operation) as Deployments, bucket_name AS Organization
FROM Jobs
WHERE (operation LIKE 'JOB_Deploy')AND starttime BETWEEN '12/01/2006' AND '12/01/2009' AND (status <>3)
GROUP BY convert(char(10), starttime, 101),bucket_name
ORDER BY MonthYear
This last query shows total deployments listed by username (someone helped me with this)
SELECT U.username, COUNT(J.job_id) AS Deploys
FROM Jobs J INNER JOIN
Usr U ON J.user_id = U.user_id
WHERE (J.object_type_full = 'Virtual Machine') AND (J.operation = 'JOB_Deploy') AND (starttime BETWEEN '12/01/2006' AND '12/01/2009')
GROUP BY U.username
I would like to know how to get some of the following:
Top 10 Users (Query 3 lists the total deployments per user but i don't know how to have it display this)
number of images created monthly (VM Templates / Workspace Configurations)
number of images captured to the library monthly
Biggest VMs
Number of logins daily (to Lab Manager)
Top 10 images checked out
Images not used in x days
Any help would be greatly appreciated

Troubleshooting Queries for Lab Manager 4
I always had the need to map the VM IDs in vSphere Client and public IPs to the actual user and organisation. Also, LUN and ESX relations I need from time to time.
SQL file to show all deployed VMs in all configurations
use LabManager
go
select
right('000000' + convert(varchar,bvs.dir_id),6) + '-' + left(bvs.name,15) as "Name in VCeneter",
left(bko.name,12) as "Organization",
left(bkw.name,8) as "Workspace",
left(us.fullname,20) as "User",
left(cfg.name,25) as "Configuration",
dir.chain_length as "Chain Length",
left(ds.display_name,15) as "LUN",
left(ms.display_name,26) as "ESX Server",
rii.ip_addr as "Internal IP",
rie.ip_addr as "External IP",
left(bvs.vm_tools_version,7) as "VM Tools",
bvs.vcpu_count "CPU Count",
left(bvs.mem,5) as "Memeory",
convert(varchar(19), bvs.date_created, 120) as "Created",
convert(varchar(19), dvs.date_deployed, 120) as "Deloyed"
from BucketVirtualServer bvs
inner join Bucket bko on bko.bucket_id=bvs.OrganizationBucketId
inner join Bucket bkw on bkw.bucket_id=bvs.bucket_id
inner join ConfigurationView cfg on bvs.sg_id=cfg.sg_id
inner join Usr us on us.user_id=bvs.user_id
inner join FsDir dir on dir.dir_id=bvs.dir_id
inner join Datastore ds on ds.datastore_id=dir.datastore_id
inner join NetworkInterface ni on bvs.vs_id=ni.vs_id
inner join ReservedIPAddress rii on rii.address_id=ni.ip_address_id
left join ReservedIPAddress rie on rie.address_id=ni.ext_address_id
inner join DeployedVirtualServer dvs on dvs.vs_id=bvs.vs_id
inner join ManagedServer ms on ms.ms_id=dvs.ms_id
where bvs.is_vrouter=0
order by bvs.dir_id
go
Batch file
osql -S localhost\LABMANAGER -E -i vmlist.sql -o vmlist.txt -w 1024 -n
start notepad vmlist.txt
SQL file to show all VMs in all configurations
use LabManager
go
select
right('000000' + convert(varchar,bvs.dir_id),6) + '-' + left(bvs.name,15) as "Name in VCeneter",
left(bko.name,12) as "Organization",
left(bkw.name,8) as "Workspace",
left(us.fullname,20) as "User",
left(cfg.name,25) as "Configuration",
dir.chain_length as "Chain Length",
left(ds.display_name,15) as "LUN",
left(ms.display_name,26) as "ESX Server",
rii.ip_addr as "Internal IP",
rie.ip_addr as "External IP",
left(bvs.vm_tools_version,7) as "VM Tools",
bvs.vcpu_count "CPU Count",
left(bvs.mem,5) as "Memeory",
convert(varchar(19), bvs.date_created, 120) as "Created",
convert(varchar(19), dvs.date_deployed, 120) as "Deloyed"
from BucketVirtualServer bvs
inner join Bucket bko on bko.bucket_id=bvs.OrganizationBucketId
inner join Bucket bkw on bkw.bucket_id=bvs.bucket_id
inner join ConfigurationView cfg on bvs.sg_id=cfg.sg_id
inner join Usr us on us.user_id=bvs.user_id
inner join FsDir dir on dir.dir_id=bvs.dir_id
inner join Datastore ds on ds.datastore_id=dir.datastore_id
inner join NetworkInterface ni on bvs.vs_id=ni.vs_id
inner join ReservedIPAddress rii on rii.address_id=ni.ip_address_id
left join ReservedIPAddress rie on rie.address_id=ni.ext_address_id
left join DeployedVirtualServer dvs on dvs.vs_id=bvs.vs_id
left join ManagedServer ms on ms.ms_id=dvs.ms_id
/* where bvs.is_vrouter=0 */
order by bvs.dir_id
go
Batch file
osql -S localhost\LABMANAGER -E -i vmlist_all.sql -o vmlist_all.txt -w 1024 -n
start notepad vmlist_all.txt

Uploading Hi Res image

I am looking for a way to allow users to upload a hi re image to my ftp site so I can retrieve it and produce marketing material.
Can anybody point me in the right direction.
What tools would work best?
We are also looking at working with a word press site.
Basically I need a e-commerce site that allows users to upload Hi Res..any suggestions, templates??
Thanks
Everett

Talk to your server hosting company about what you're planning to do. Ask them it it's OK for the public to upload files to your server. Many shared hosting plans prohibit this for obvious security reasons. Also your server's configuration settings probably contain file size limits. This would need to be increased by your host to accommodate HiRes image files.
File Upload Form with PHP scripts
http://www.w3schools.com/php/php_file_upload.asp
Nancy O.

Settlement of judgement....little help here....

The one baddie I have left on my credit report is a judgement that was entered against me in 2010. I disputed it recently to see if it would be removed. Of course it wasn't. It was only updated to "Pending". Until now it said "filed". I'm not sure of the meaning of that exactly, but it's kinda whatever at this point. I went to the courthouse a few days ago (I never went to court when served), and though I honestly don't remember it, apparently I signed a "consent judgement" and sent it to the lawyer where I agreed to make payments. My idiotic irresponsible self made a few payments, and then stopped. I never heard from them again. I'm not dumb enough (now) to think that it's just gone away. Now I want to make some moves to at least get this behind me so I can be rid of it in two years. The amount of the judgement is $2045. I, of course, don't have that just lying around. I want to attempt to negotiate a settlement, but I have never done that and I am rather clueless where to start. I thought about offering $700. I could pay that pretty easily at this point. In doing this, I assume I would first write them a letter CMRRR and outline my offer and see if they bite then wait on their response. Is that a good move, or is that like waking the beast? I'm scared to wait it out because if they renew it I'm screwed for another 7 years. On top of that, I make this right. I'm in Alabama, if that makes a difference. Also, does anyone have a suggested template for a letter of this nature? Thanks!

So I should contact the creditor (Asset Acceptance) as opposed to their attorney that represented them? I assume any communication should be done via mail, yes? What would be a suggested amount to start negotiations? My original balance was $2045. I thought about starting at 30%. Its just an arbitrary number I decided on, but felt like a good starting point.

I am using the big date calendar template and when I submit it to apple for printing I lose the name of two months. These names are not text boxes. I see the names when I send it in but something happens during the transmission to apple. It was suggested

I am using the big date calendar template in iPhoto. I am on Lion 10.7.2, macbook air. The names of the months are on each calendar page but something happens when I send the data to Apple. The names are part of the template. They are not text boxes. I lose two names on the calendar after it is sent to Apple. Apple suggested I make a pdf file of my calendar before sending it in and check to make sure every name shows. I did this with a calendar I just sent in. The calendar was correct. All names of the months were showing. After sending the data two month names disappeard because when it arrived by mail, it was incorrect. Apple looked at my calendar via a pdf file and it was incorrect. This is second time this has happened. I called Apple and they had me delete several folders in the Library folder, some preferences and do a complete reinstall of iPhoto. I have not yet remade the defective calendar. I am wondering if anyone else has had this problem?
kathy

Control-click on the background of the view all pages window and select "Preview Calendar" from the contextual menu.
You can also save the pdf as a file to compare to the printed calendar. If the two names are visible in the pdf file then the printed copy should show them. Contact Apple for a refund. Apple Print Products - Apple Store (U.S.)

Process Workspace-11.1.1.6.0 template customization

On our project, we want to access BPM workflows using WebCenter Process Spaces, since we want to use the collaboration capabilities of WebCenter.
This is approximately (unfortunately, I cannot attach a screenshot to a thread) how a space created using the Process Workspace-11.1.1.6.0 template looks like right now in our environment:
http://docs.oracle.com/cd/E23943_01/user.1111/e15175/bpmug_pp_cust_ws.htm#BACIGJEC
but we would like it to look like the Process Tracking tab in the BPM Workspace:
http://docs.oracle.com/cd/E23943_01/user.1111/e15175/bpmug_ws_mng_proc_insts.htm#BEIFBJHC
that is, we want the user to be able to click on an instance and see the audit trail just below, without having to open another window.
Is it possible to take the Process Tracking tab from BPM Workspace and include it in the Process Workspace-11.1.1.6.0 template? What are the steps?
Regards
Juan Algaba Colera
PD: I have two screenshots from our development environment. I can email it to anyone who is willing to help us out with this.
Edited by: Juan Algaba Colera on Oct 23, 2012 4:02 AM

Better check all the documents in the link I posted above, but the most basic advice from the Doc 583878.1 is:
Increase timeout settings for web sessions on the HFM site
In normal scenarios, increasing the session timeout might result in performance issues; as more "dead" sessions are kept open much longer, more processing power is wasted on them. To have long session timeouts is also (generally) considered bad practice from a security point of view.
Note that these timeouts are only enforced on idle sessions, i.e. when the user will not "click anything" for that amount of time. For this reason, they rarely need to be set to anything higher than 120 minutes.
The following instructions change the idle timeout from default 20 minutes to 30 minutes in Microsoft Internet Information Services 6 (IIS):
1.Go to Start > All Programs > Administrative Tools > Internet Information Services (IIS) Manager.
2.Expand the server node <ServerName> (local computer).
3.Right click on the application pool node.
4.Select Properties.
5.Select the Performance tab.
6.Change the Idle timeout value from 20 to 30 minutes.
7.Click Apply.
8.Click OK.
9.Expand the node Web Sites.
10.Right click on the 'HFM' web site.
11.Go to Properties > Home Directory tab > Configuration button > Options tab.
12.Change the Enable session state > Session timeout value from 20 to 30 minutes.
13.Click OK.
14.Click OK.
15.Test that the timeout is now the new value.

Calling a stored workspace procedure/function in page template

I have an unusual puzzle. I am trying to find a way to call a stored procedure or function in a page template; ie, through HTML/javascript.
I maintain a website with several dozen applications and I currently have the page templates in all of these applications subscribed to one master template, so that changes can be made in one place and implemented across all the applications. So far, the only content I can display on every page in every application through page template subscription is static content; dynamic content (ie content generated based on data in the database) is implemented page-by-page (or application-by-application).
I'm wondering if there is a way to call stored procedures/functions from the page template to create dynamic content (based on the :APP_USER identity, for example). htmldb_Get() doesn't seem to be helpful, because as far as I can tell it only calls on-demand application processes, not workspace procedures/functions.
Is there any way at all that a workspace procedure/function can be called directly from the page template (eg with a javascript function of some kind)? Again, I am trying to avoid having to use any application/page-level apex entities (items, processes, etc) so that I can just put the javascript or whatever in the page template and refresh all the applications in my workspace.
Thanks in advance!
Jonathan Cole
PS - I am currently using v3.1

Just to add the owner in output :
SCOTT@demo102> ed
Wrote file afiedt.buf
1 select owner, table_name, ltrim(max(sys_connect_by_path(column_name,','))
2                     keep (dense_rank last order by position),',') as PKcolumns
3 from
4 (select a.owner, a.table_name, b.column_name, b.position
5   from all_tables a, all_cons_columns b, all_constraints c
6   where a.owner=b.owner
7   and   a.table_name=b.table_name
8   and   b.owner=c.owner
9   and   b.constraint_name=c.constraint_name
10   and   c.constraint_type='P'
11   and   a.table_name in ('SDO_COORD_AXES','EMP'))
12 group by owner, table_name
13 connect by prior owner = owner and prior table_name = table_name and prior position = position - 1
14* start with position = 1
SCOTT@demo102> /
OWNER                          TABLE_NAME                      PKCOLUMNS
MDSYS                          SDO_COORD_AXES                  COORD_SYS_ID,ORDER
SCOTT                          EMP                             EMPNO
SCOTT@demo102> Nicolas.

Creating Dimension using template in Analytical workspace manager

Hi,
I am rajan, I am working with Oracle's Analytical workspace manager Release 2.
I am trying to create the dimension using the templates from the file. it throws the following error,
The following errors have occurred when loading contents:
Closed Connection
Note : I am referring the tutorial in the following URL,
http://st-curriculum.oracle.com/obe/db/10g/r2/prod/bidw/awm/awm_otn.htm and also i have downloaded the awm.zip file from the same URL and imported into my desktop.
Right now, I am working based on this tutorial only.
Kindly,help me to resolve this issue.
Thanks
Rajan

Francisco,
Query DBA_REGISTRY to verify the status of "OLAP Analytic Workspace" component.
Also, wait for the script to finish and check the status of the objects then.
Thanks,
Hussein

Suggested template workspace

Similar Messages

Maybe you are looking for