Sum quantity field with 5 key fields

How to sum quantity field with 5 key fields

try this out.
loop at <itab>.
     at new <field>.
       sum.
    endat.
endloop.

Similar Messages

  • Error with quantity field:Datasource Creation Using Function Module method

    Problem with DATASOURCE Creation using Function Module method :
    I have created a datasource ZSTANDARD_COST_PRICE using Function Module method . The datasource creation is successfull when I remove the quantity field from the Z table . If I dont remove the quantity field from my Z table it gives an error as "Units Field WAERS for field STPRS of datasource ZSTANDARD_COST_PRICE is hidden". I am not able to remove this error . Please someone guide.
    Let me know if my explanation is not clear enough.
    Thanks in advance,
    Neha.
    Z table definition is as below :
    MATNR MATNR CHAR 18 0 Material Number
    BWKEY BWKEY CHAR 4 0 Valuation area
    LFGJA LFGJA NUMC 4 0 Fiscal Year of Current Period
    STPRS STPRS CURR 11 2 Standard Price   " Here the currency field is WAERS and table T001
    PEINH PEINH DEC 5 0 Price Unit
    VJSTP VJSTP CURR 11 2 Standard price in previous year
    VJPEI VJPEI DEC 5 0 Price unit of previous year.
    Edited by: Neha Rathi on Jan 30, 2009 3:03 PM

    Hi,
    You should add it as one of the main fields as you have added other fields and not as the currency fields...that is..it should be part of the data source and you should be able to see it in RSO2...
    Also if added as i said then it will come as new field in the data source...you can either let it be there...or hide it..
    also if you want to populate it then you will have to write the code for this fields as well.
    Thanks
    Ajeet

  • Runtime error in Dynamic internal table with AMOUNT and Quantity Fields..

    Dear friends,
    I am attempting write a dymanic Select Statement (with joins).
    And the sleect query looks like this..
      SELECT (LT_SEL_LIST)
      INTO CORRESPONDING FIELDS OF
      TABLE <DYN_TABLE>
      FROM (LT_FROM_LIST)
      WHERE (LT_WHERE3).
    Here the into table is a dynamically created internal table..
    which is created by ...this
    CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
        EXPORTING
          IT_FIELDCATALOG = IT_OUTPUT2[]
        IMPORTING
          EP_TABLE        = DY_TABLE.
    the it_output2 contains the the fieldcatlog information of dynamically given fields :-
    like:-
           TABNAME
           FIELDNAME
           DATATYPE
           LENG
           INTTYPE
           ROLLNAME
           DECIMALS
           REFTABLE
           REFFIELD
    i mean the internal table is constructed with reference to all the bove metadata.
    Problem:- This query run fine with all the fields Except AMOUNT AND QUANTITY fields....
    When the selection list contain VBAK-NETWR or MSEG-MENGE..It throws a runtime error.
    "The data read during a SLECT access couldnt be inserted into the target field,either conversion is not supported for
    the target field's type or the target field is too short."
    after this I even tried to construct the dynamic table with CFILEDNAME and QFIELDNAME in the Fieldcatalog.
    so now my fieldcatlog looks like this:---
    LOOP AT IT_DD03L..
      IF IT_DD03L-DATATYPE = 'CURR'.
           TABLEFIELD-CFIELDNAME = IT_DD03L-FIELDNAME .
           ENDIF.
       IF IT_FIELDCAT3-DATATYPE = 'QUAN'.
           TABLEFIELD-QFIELDNAME = IT_DD03L-FIELDNAME .
      ENDIF.
           TABLEFIELD-TABNAME     = IT_DD03L-TABNAME.
           TABLEFIELD-FIELDNAME   = IT_DD03L-FIELDNAME.
           TABLEFIELD-DATATYPE    = IT_DD03L-DATATYPE.
           TABLEFIELD-INTLEN      = IT_DD03L-LENG.
           TABLEFIELD-INTTYPE     = IT_DD03L-INTTYPE .
           TABLEFIELD-ROLLNAME    = IT_DD03L-ROLLNAME.
           TABLEFIELD-DECIMALS    = IT_DD03L-DECIMALS.
           TABLEFIELD-REF_TABLE   = IT_DD03L-REFTABLE.
           TABLEFIELD-REF_FIELD   = IT_DD03L-REFFIELD.
    APPEND TABLEFIELD.
    CLEAR TABLEFIELD.
    ENDLOOP.
    Note:- this is a test code so ignore performance issues...
    Please help me with some code ...to avoid the Runtime erorr.
    Thanks,
    jeevan.

    Hi Jeevan,
    Why are moving only few fields from DD03L table to your field catalog? Why don't you use move-corresponding? The following code works for me in ECC6.0.
    data: it_dd03l type table of dd03l initial size 0,
          ls_dd03l type dd03l,
          lt_fldcat TYPE lvc_t_fcat,
          ls_fldcat TYPE lvc_s_fcat,
          ls_where(72) TYPE c,
          lt_where LIKE TABLE OF ls_where,
          lt_fld LIKE TABLE OF ls_where,
          lt_data_dy TYPE REF TO data.
    field-symbols: <ft_data> TYPE STANDARD TABLE.
    select * into table it_dd03l from dd03l
        where tabname = 'VBAK'
          and ( fieldname = 'VBELN' or fieldname = 'NETWR' ).
    check sy-subrc eq 0.
    loop at it_dd03l into ls_dd03l.
      move-corresponding ls_dd03l to ls_fldcat.
      append ls_fldcat to lt_fldcat.
      move ls_dd03l-fieldname to ls_where.
      append ls_where to lt_fld.
      if ls_dd03l-fieldname = 'VBELN'.
        clear ls_where.
        concatenate ls_dd03l-fieldname ' <> ''''' into ls_where.
        append ls_where to lt_where.
      endif.
    endloop.
    check not lt_fldcat is initial.
    CALL METHOD cl_alv_table_create=>create_dynamic_table
          EXPORTING
            it_fieldcatalog           = lt_fldcat
          IMPORTING
            ep_table                  = lt_data_dy
          EXCEPTIONS
            generate_subpool_dir_full = 1
            OTHERS                    = 2.
        IF sy-subrc <> 0.
          RAISE no_configuration_data.
        ENDIF.
        ASSIGN lt_data_dy->*  TO <ft_data>.
    check sy-subrc eq 0.
    select (lt_fld) from VBAK into corresponding fields of table
        <ft_data>
        where (lt_where).
    Thanks
    Bala

  • Multiple entries in a Z table with same key fields

    Hi
    I do have a ZTABLE, with 3 key fields defined earlier. It consists of around 1 lakh records. Later onwards, two of the non keyfields have been made to key fields.
    This table is being populated with records at the time of saving a ztransaction.
    But some times, the system is updating the same records, some times twice, sometimes thrice, etc. I got to know that all fields (both key fields and non-key fields) of the record are same. That is, records are being updated in to the database table n number of times may be depending of some false logic in the program.
    If I tried to enter the same using SM30, it is showing me an error message stating that the record is already existing.
    What can be the reson?

    Hi,
    It seems there is some kind of data inconsistency..try to get all the records and then delete the duplicate entries through program....Now once u r done , from now onwards there won't be any duplicate entiers.,also before updating table use filters to avoid the duplication..
    Regards,
    Nagaraj

  • Sender file adapter Adapter with out Key field

    Hi All
                 i do have have a requirment ,Sender file adapter , for FCC but file is  with out Key field
    HEADER>
    <DATA1>
    <DATA2>
    <DATA3>
    <HEADER>              file structure
    <ITEM>
    <ITEM1>
    <ITEM2>
    <ITEM3>
    <ITEM
    and the file si
    '10001,20081902,US
    10,soda,1
    30,soda,4
    40,soda,5
    10002,20081902,US
    10,steel,1
    30,steel,4
    40,steel,5
    , and i need to identify the Header and Item using there lenght only , please anyone as idea abt this help me

    Why to post the same question TWICE... in 30 min ? you don't like the answers ?
    File content Conversion Issuse for a Sender File Adapter

  • Can we create table maintence generator with out key field

    Hi,
    I have created a ztable in that client is the primary key as I don't want any other field as primary key.
    For this  i have created table maintenace generator but when i open it in sm30 blnak screen is coming.
    Here my question is can we create a table maintenace generator with out key field other than MANDT.
    If it's possible please let me know.
    Regards
    hari

    >
    Mathews Joseph wrote:
    > I agree to the above points , but you can try one thing.
    >
    > When you create the table maintenance screen , from SE11 you assign a function group.
    >
    > Double click on the function group and you can go to the main program and open that in SE80, take screen generated and try manually adjusting the screen and putting the non key field details...
    >
    > Not sure this will work , but may be you can give it a try.
    >
    > Mathews
    But the table could hold at most a single record (per client). The design is lacking.
    Rob

  • Problem with currency and quantity field

    Hi,
    I have done a couple of BDC and watched that if some currency or quantity field is there and i want to run the BDC the particular currency/quantity field will not populate the value inspite of i have declared the same table field that it refers to in the screen in the internal table.
        But, if i declare a character string in the internal field having same length as the screen field it will populate at run time. Why so?
    Regards
    Sandeep

    Hi,
    Even i have experienced the same problem many a times and use a character string as a work around to solve it.
    I guess one reason for it is for the currency and quantity fields, the actual defined length and the output length are different with output length being 3 or 4 bytes greater than that of actual lenght and also the fact that these fields are always right justified. hence some bytes of the field is getting truncated which the system does not allow and discards the whole value.
    regards,
    Mahesh

  • JPA - How to map relation with NON-KEY field.

    Hello.
    Problem with mapping is NullPointerException when calling EntityManager em.createNativeQuery:
    Table1 (Bm_Treeassoc):
    MY_ID (Primary Key)
    BOOKMARKID (-> MY_ID in Table2)
    Text
    Table2 (Bm_Bookmark):
    MY_ID ( Primary Key)
    Text
    //CLASS BmTreeassoc
    @OneToMany(targetEntity=BmBookmark.class, mappedBy="treeMaster", cascade = CascadeType.ALL, fetch = FetchType.LAZY)
         private BmTreeassoc treeMaster = null ;
    //CLASS BmBookmark
    @ManyToOne(targetEntity=BmTreeassoc.class, fetch = FetchType.LAZY, cascade = CascadeType.ALL, optional = true)
         @JoinColumn(name="MY_ID", referencedColumnName="BOOKMARKID", unique=true)     
         private ArrayList<BmBookmark> bookmarks = new ArrayList<BmBookmark>() ;
    This Leads to the exception.
    Mapping form MY_ID to MY_ID instead BOOKMARKID will not throw the exception,
    so I assume I have a problem with the KEY Field?
    Any ideas?
    Kind regards
    Frank

    OK,
    after reflecting (after maniacally trying for days).
    Here is the answer by myself:
    I do not use the mapping stuff at all no more.
    I solved my join by using a view:
    CREATE VIEW SAPDEMO.VTree
         AS SELECT t.TreeID, b.MY_ID, b.CLIENTID, b.Nickname, u.URL
         FROM SAPDEMO.BM_TreeAssoc as t
              JOIN SAPDEMO.BM_BOOKMARK as B ON t.BookmarkID = b.MY_ID
              JOIN SAPDEMO.BM_URL as U ON b.URL = u.MY_ID
    Create the entity and then do a:
    select * from VTREE where clientid=1 and treeid=446
    Works great, simple, fast.

  • Problem with the quantity field

    hi every one
    i am facing a problem with the quantity field (vbap-kwmeng)
    as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
    among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
    once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
    problem is input of length of quantity is 15 and the output length is 19
    so when i am pressing save
    say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
    how can i capture the original changed value.
    vamsi

    what about define two fields in  you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
    you can test it,mybe some one has one better idea.

  • Quantity field to string with units ?

    Hello All,
           i'm moving quantity field to a string .
    But I want to move with reference unit also.
          DATA: lv_del_qty TYPE string.
          CLEAR lv_del_qty.
          lv_del_qty = itab->del_quantity.
    I want the unit referece also.
    How to do this ?
    Regards,
    Deepu.K

    Hi Deepu,
    If you want to add the quantity fiels to a string then go for the concatenation of othe reference Unit and the quantity.
    <b>Syntax is</b> .
          DATA: lv_del_qty TYPE string.
          CLEAR lv_del_qty.
    Concatenate  itab-quantity itab-refence_unit into lv_del_qty.
    Write:/ lv_del_qty.
    <b>Output</b> will be  1222USD.
    loop at itab into wa_itab.
       concatenate itab-quantity itab-currency into v_string separated by space.
       modify itab from wa_itab.
    endloop.

  • I did force shutdown on my MacBook Pro (2006 year, 15.4"), so, when I tried to boot, it shows apple logo (as usual) and shuts down. When I booting MacBook with Option key pressed it shows lock icon and field for password. Please help me.

    I did force shutdown on my MacBook Pro (2006 year, 15.4"), so, when I tried to boot, it shows apple logo (as usual) and shuts down. When I booting MacBook with Option key pressed it shows lock icon and field for password. Please help me.

    Wait for advice on repairing a damaged filesystem.  Forceshutdown stops processs in mid-stream and leaves some parts not-valid.
    Do not proceed until you get that avice.

  • Problem with  the quantity field in bdc?

    Hi,
    i have to populate a quantity field in bdc .
    for ex 123.00. but the bdc accepting only in the form of 123,00.
    How can I do this .
    I tried by changing the user profile, but went in vain.
    Suggest me how to convert ?
    Thanks.

    Hi,
    Create a variable of TYPE CHAR.Write your quantity field value into this variable and pass this variable to the BDC. This is the way of passing quantity fields to BDC.
    DATA: V_AMOUNT(22) TYPE C.
    WRITE ITAB-DMBTR INTO V_AMOUNT.
    Pass this V_AMOUNT to BDC flow.
    Hope this helps.
    ashish

  • Problem with quantity field in BDC

    hi experts,
                   i am trying to upload  data from internal table to SAP using BDC, but while uploading quantity fields it is giving error as "Input fields is longer than screen field", Is there any method to upload quantity fields to SAP.
                     thanks in adancae,

    Hi,
    Before passing the value to perform bdc_field, convert that value to char type
    For eg.
    DATA :        v_val(10)               TYPE c,
      v_val = wa_operation-std_value_01. CONDENSE v_val.
      CONCATENATE 'PLPOD-VGW01(' n_linecount1 ')' INTO v_para.
      PERFORM f_bdc_field       USING v_para           v_val.
    FORM f_bdc_field  USING fnam fval.
      CLEAR wa_bdctab.
      wa_bdctab-fnam = fnam.
      wa_bdctab-fval = fval.
      APPEND wa_bdctab TO it_bdctab.
    ENDFORM.                    " f_bdc_field
    check this it would be useful.

  • Mapping of period with total quantity field

    Hi All,
    I haVe Total quantity field MEG001,MEG002,MEG003..............MEG012 from table COSP.
    I have parameter on selection screen as period(perio) from table mbewh
    No my requirement is if the period is 00 then field MEG001
    if period is 01 then MEG002
    period11...........MEG011
    period 12............MEG012
    Please let me know if any solution.
    Regards,
    oorvi

    Hi,
    You could try like this,
    parameter: p_period type (your period field).
    data: len type i,
             var type string.
    len = p_period + 1.
    concatenate 'MEG' len into var.
    select single ( var )
    from COSP
    into temp
    where (any conditions)
    Vikranth

  • How to deal with table.Field/sum(table.Field) BIEE

    Ｉ　ｈａｖｅ　ａ　ｑｕｅｓｔｉｏｎ　ｗｉｔｈ　ｔｈｉｓ　table.Field/sum(table.Field)，　
    ａｎｄ　ａｎｏｔｈｅｒ　ｃａｓｅ　ｉｓ：　ｏｎｅ　ｆｉｅｌｄ　ｏｆ　ｔａｂｌｅ　／ａｎｏｔｈｅｒ　ｆｉｅｌｄ　ｏｆ　ａ　ｔａｂｌｅ，　ｂｕｔ　ｔｈｅｓｅ　ｔｗｏ　ｔａｂｌｅｓ　ｎｏｔ　ｄｉｒｅｃｔｌｙ　ｒｅｌａｔｉｏｎ，　ｓｕｃｈ　ａｓ：　ｏｎｅ　ｄａｙ　ｓａｌｅｓ（ｏｎｅ　ｔａｂｌｅ）／ｔｈｅ　ｌａｓｔ　ｄａｙ　ｓａｌｅｓ（ａｎｏｔｈｅｒ　ｔａｂｌｅ）

    The way to go is hierarchical field names, as it has been said.
    What would give you more flexibility, would be to give your element page's fields logical names. This would lead to building blocks, which can be freely combined. Any logic within the building blocks would not change at all, and logic going beyond a block would be straightforward to set up.
    Hope this can help.
    Max Wyss.

Maybe you are looking for