SUM the COUNT RESULTS from 2 Tables

If I have 2 seperate queries how can I sum the results of them
select count(*) from tableA;
select count(*) from tableB;
MAXIMO@tarml > select count(*) from tableA;
COUNT(*)
500
MAXIMO@tarml > select count(*) from tableB;
COUNT(*)
600
MAXIMO@tarml > I want a query that gets me the 1100?
I know people in here will know a simple solution that I can not find on the web?
Thanks in advance again as always...
Miller

You should have read your given link more closely: You would have found
select ( select count(*) from Table1 )
     + ( select count(*) from Table2 )
          as total_rows
from my_one_row_table --<---   replace with dual

Similar Messages

How to sum the count results?

Hi,
I have this query:
SELECT SUM (cnt) FROM
select max(timestamp), min(timestamp), count(1) as cnt from table1
union
select max(timestamp2), min(timestamp2), count(1) from table2
It display sum of all count results. But how to display each result from query and sum result at the end?
Best.

OK, thanks, that helps a lot. Though if you could put {noformat}{noformat} before and after your code snippets that would help further.
So you basically want a total at the end:WITH test_data AS (
SELECT 1 col1, TO_DATE('16-AUG-08', 'DD-MON-YY') max_ts, TO_DATE('16-AUG-08', 'DD-MON-YY') min_ts, 1000 cnt FROM DUAL UNION ALL
SELECT 1, TO_DATE('31-OCT-08', 'DD-MON-YY'), TO_DATE('31-OCT-08', 'DD-MON-YY'), 1000 FROM DUAL UNION ALL
SELECT 1, TO_DATE('10-FEB-09', 'DD-MON-YY'), TO_DATE('01-JAN-01', 'DD-MON-YY'),422 FROM DUAL UNION ALL
SELECT 1, TO_DATE('20-FEB-09', 'DD-MON-YY'), TO_DATE('20-FEB-09', 'DD-MON-YY'),1000 FROM DUAL UNION ALL
SELECT 1, TO_DATE('20-FEB-09', 'DD-MON-YY'), TO_DATE('20-FEB-09', 'DD-MON-YY'),14825 FROM DUAL UNION ALL
SELECT 1, TO_DATE('27-FEB-09', 'DD-MON-YY'), TO_DATE('27-FEB-09', 'DD-MON-YY'),1000 FROM DUAL UNION ALL
SELECT 1, TO_DATE('28-FEB-09', 'DD-MON-YY'), TO_DATE('26-FEB-09', 'DD-MON-YY'),1000 FROM DUAL UNION ALL
SELECT 1, TO_DATE('01-MAR-09', 'DD-MON-YY'), TO_DATE('01-MAR-09', 'DD-MON-YY'),1000 FROM DUAL UNION ALL
SELECT 1, TO_DATE('05-MAR-09', 'DD-MON-YY'), TO_DATE('16-AUG-08', 'DD-MON-YY'), 5150 FROM DUAL UNION ALL
SELECT 1, TO_DATE('27-APR-09', 'DD-MON-YY'), TO_DATE('30-OCT-08', 'DD-MON-YY'),8733 FROM DUAL UNION ALL
SELECT 1, TO_DATE('27-APR-09', 'DD-MON-YY'), TO_DATE('20-FEB-09', 'DD-MON-YY'),10000 FROM DUAL)
-- end test data
SELECT col1, max_ts, min_ts, sum(cnt) total_cnt
FROM test_data
GROUP BY ROLLUP((col1, max_ts, min_ts));
1 16-AUG-08 16-AUG-08 1000
1 31-OCT-08 31-OCT-08 1000
1 10-FEB-09 01-JAN-01 422
1 20-FEB-09 20-FEB-09 15825
1 27-FEB-09 27-FEB-09 1000
1 28-FEB-09 26-FEB-09 1000
1 01-MAR-09 01-MAR-09 1000
1 05-MAR-09 16-AUG-08 5150
1 27-APR-09 30-OCT-08 8733
1 27-APR-09 20-FEB-09 10000
45130
11 rows selected.

How to sum the column in a table seperated by sign.

How to sum the column in a table separate by sign.
For Example:
A B
10 MOHAN
-15 KUMAR
-25 MARCH
50 MAY

SELECT SUM(CASE SIGN(A) WHEN 1 THEN A ELSE NULL END) SUM_POSTIIVE,
SUM(CASE SIGN(A) WHEN -1 THEN A ELSE NULL END) SUM_NEGATIIVE
FROM tbl
/SY.

How can i get the count vaule from GPIB?

I want to get the count waule from GPIB ,but I find that the vaule I get from GPIB now is the trace vaule ,
so I ask How can i get it.

The count of what? What kind of instrument are you using?

Copy the inspection result from one lot to multiples lots!!

Hi SAP expert,
I want to copy the inspection result from one lot to multiples lots, currently i know how to setup the copy to another lot(SAML Response from SAP ID Service ) , but i dont know to do to multiples lot.
¿Someone can help me?
Thank you

First you have to customizing the functionality of Copy of Inspection Results using the following path, where you have to entry the inspection types, plant .etc., where you want to have the functionality.
SPRO -> Quality Management -> Quality Inspection -> Make Settings for Copy of Inspection Results
Then when you are in Record Result screen you select Menu -> Edit -> Copy Inspection Results ,
then a pop-up window is displayed and you filled in with the inspection lot which has the results and then another pop-up window is displayed to select the characteristics that you want to copy.
A.P.

Delete the reporting results from the workbook

Hi,
How telete the reporting results from the workbook via the BEX menu functionality

That functionality is not available in the Bex 7 Analyzer, just in the Bex 3.x functionality. To delete workbook results, we simply select the rows of data (but NOT the titles) and delete the rows in excel. Then save the workbook.
If you delete the titles you will delete the analysis grid, and you will have to recreate it.
You can also change the variable values, click "Cancel" and the workbook then shows no results for any query related field. However, this includes the navigation panes and text elements, which produces a rather blank looking workbook.

Know anything about an E-Book credit: specifically, "The credit results from the Settlements reached with publishers Hachette, HarperCollins, Simon

Know anything about an E-book class action credit? specifically... "The credit results from the Settlements reached with publishers Hachette, HarperCollins, Simon & Schuster, Macmillan, and Penguin in antitrust lawsuits filed by State Attorneys General and Class Plaintiffs about the price of electronic books ("E-books"). Apple Inc. is not a party in these settlements."

The information supplied by 8802 is correct.
For those who have not received the e-mail from E-Book AG Settlement Administrator, here is something to check.
The e-mail I have associated with my iBookd (iTunes) account has a "Moderate" spam blocker on it.
My son called and asked if I had received my credit, as he had. He advised he found it in his "Known spam" file.
I checked my account and it was not in the spam folder, why it should have been is beyond me. For the heck of it I checked the "Known spam" file. There it was, received on 26th. Thank goodness I didn't have the account set to automatically delete known spam, or it would have been gone. If I hadn't have checked it would have been purged automatically in 15 days.
There is no logical reason for this e-mail to have been considered as "Known spam", but there it was.
Possibly Apple wanted to comply with notifying those affected in the case, but was hoping many wouldn't find the authorization for rebate in time. Something to consider.

Error when tranfering the planning results from SCM to R/3

hi,
While defining distribution definition i am getting follwing warning message " Location 1000 originates from source syst. T90CLNT800 and distr. to targ syst R/3CLNT800**
while transfering the result from SCM to R/3 it got stuck in the queue. there i able to see T90CLNT800 not the new one( R/3CLNT800) which defined in publication. also i deleted all the distribution definition belongs to T90CLNT800.
Initially i worked with T90CLNT800 and connected it to APO.Created data in this client and ciffed it to APO.
Afterwords, i created client R/3CLNT800 and now using with APO system.
how to solve this issue.
regards
Thennarasu

Hi,
I understand that this problem is in Dev system.
First do the initial tranfer of the master data and transaction data and take a fresh run in APO. But before doing this delete APO transaction data.
If this doesn't work then follow as given bellow.
If you change the logical system you have to run BDLS to convert the logical system in the database tables.
Do this in the R/3, then do the initial tranfer of the master and transaction data and take a fresh run in APO.
Regards,
Kishore Reddy

How to get the count property from the oData response

Hi,
I have a fullscreen view in my Fiori app where we call a oData service through table.bindItems() inside the controller.
The binding of items works fine but we have a situation when we need to display the total number of items (for e.g. 515) on the UI. We do not get this information from the VDM, so we plan to use the length property of the getList() method to determine the total number of items. But because of growing feature of the table it only reads 100 items at a time and the length property returns only 100. I have attached the listener attachRequestCompleted() for the model so that once the bindItems() request is complete i can get the length property. But my problem is that i want the total count.
I saw in the debug that when this table.bindItems() gets called it makes a oData service call and in the response i can see that there is a count property available which has the total number of items (515 for my e.g.) but how do i read this count property from the response inside my controller (probably inside my attachRequestCompleted)?? I would really appreciate any help in this regard. Thanks.
Kind Regards,
Ashish
Tags edited by: Michael Appleby

HI Chandra,
Thanks for your suggestions.
But i think in my case we do not want to get the complete list. We still want to get only 100 items initially and then if the user would scroll down he/she would see more items. But we already need to know the total number of items for the purpose of showing a message to the user. For e.g. Total issues (515), but the table would initially show only 100 and then another 100 after scroll. So setting the size litmit to max would not help.
And to be able to use the $count you mentioned, we have to still make another oData service call which we do not want.
But as i mentioned there is already a property named "__count" in the response of the bindItems() method call and i see that it has correct count but not sure how to retrieve it inside the controller. Thanks.
Regards,
Ashish

How do I reorder the form results from a non-BC form in Muse?

I have a problem with Muse, in that the emails that get delivered from filled-in forms have various fields in the wrong order and not the order that the fields appear in the actual form.
How do I ensure the form results emails maintain the order of the fields in the form?
For example, on the www.actconstruction.com Subcontractors form, several of the fields are wildly out of order. Here's a screen capture of the form results email:
Here's the form as it appears on the site. You can see the fields are in completely different order to the results emai:
So, how do I make sure the fields follow a particular order that I want them to (i.e. in the order I placed them in the form itself)?
The form can be seen at www.actconstruction.com/contact-us.html. This shows the actual order of information. The form results email should follow the order exactly as shown on the web site.
I've had complaints from clients about this and need to handle it immediately. Please have someone get back to me with a figure-out.
Many thanks,
Len Williams
727-466-6888

I have a problem with Muse, in that the emails that get delivered from filled-in forms have various fields in the wrong order and not the order that the fields appear in the actual form.
How do I ensure the form results emails maintain the order of the fields in the form?
For example, on the www.actconstruction.com Subcontractors form, several of the fields are wildly out of order. Here's a screen capture of the form results email:
Here's the form as it appears on the site. You can see the fields are in completely different order to the results emai:
So, how do I make sure the fields follow a particular order that I want them to (i.e. in the order I placed them in the form itself)?
The form can be seen at www.actconstruction.com/contact-us.html. This shows the actual order of information. The form results email should follow the order exactly as shown on the web site.
I've had complaints from clients about this and need to handle it immediately. Please have someone get back to me with a figure-out.
Many thanks,
Len Williams
727-466-6888

How to read the field value from Table Control

Hello Experts,
I am creating my first Table Control Screen. Basically I have to create a screen (102) with a table control which has 2 fields: A_QTY, B_QTY and 2 Buttons: SAVE, EXIT.
When Clicked on 'SAVE' the data (MATNR) from a previous screen (101) and the data (A_QTY, B_QTY) from the new screen (102) should be saved into a Z-table.
Internal table t_data has 3 fields.
MATNR
A_QTY
B_QTY.
Table Control TC_RACK was declared like this:
controls tc_rack type tableview using screen 0102.
I/0 Fields:
A_QTY type ZQTY.
B_QTY type ZQTY.
The screen Flow Logic:
process before output.
module status_0102.
loop at t_data into w_data with control tc_rack.
endloop.
process after input.
module exit_0102 at exit-command.
loop at tc_rack.
endloop.
module user_command_0102.
module status_0102output.
set pf-status 'STATUS_102'.
set titlebar 'TITLE_102'.
describe table t_rack lines tc_rack-lines.
endmodule.                 "status_0102 output
process after input.
module user_command_0615 input.
case ok_code.
   when 'SAVE_RK'.
   when others.
endcase.
endmodule.                 "user_command_0102 input
Now for eg, when the users enter values for A_QTY and B_QTY like this:
A_QTY     B_QTY
1000         2000
3000         4000
How can I read these values and pass them to T_DATA so that I can save it into Z-table?
I greatly appreciate your help.
I've gone through some previously posted threads and could not understand because my knowledge in this area is preliminary.
Thanks a lot.
Could you please let me know
Edited by: dev a on Jan 13, 2010 2:46 PM

Hi dev a
You should use
DATA: lv_name(30) TYPE c.
FIELD-SYMBOLS: <QTY> type ZQTY.
GET CURSOR FIELD lv_name.   "Get the field name in table control
check sy-subrc = 0.
assign (lv_name) to <QTY>. "Here you get the value in <QTY>
check sy-subrc = 0.
Also use <your table control>-current_line to get the table index uo're currently on.
Hint: Do not use GET CURSOR LINE if you want to get table index since this gives you the line relative to dialog screen
Good luck
Dean Q.
Edited by: Dean Q on Jan 13, 2010 11:11 PM

NO Links or Associations created with the "Business Components From Tables"

Hello,
I have a strange problem. I'm working on a Fusion Web Applicaiton. In the Model project, I try to create some Business Components from Tables with the help of the provided wizard.
I select one of my IDE Connections, and I choose two of my tables as Entity Objects (*PATIENTS* and COUNTRIES - more details about them bellow), and also as Updatable View Objects. For Read-Only View Objects I select some other tables, afterwards I choose to create a default Application Module, and I press Finish without creating a Business Diagram. Everything works perfectly except of the fact that the wizzard has created everything but the Links and the Associations between my tables.
To be more precise, COUNTRIES is a simple table, only two columns - ID and NAME, and PATIENTS has some columns like ID, NAME, ADDRESS, DATE_OF_ADMISSION, COUNTRY_ID, where COUNTRY_ID is a foreign key to the COUNTRIES table. Both columns, PATIENTS.COUNTRY_ID and COUNTRIES.ID are NUMBERs. I was expectig the wizard to create a Link and a Association for this foreign key constraint I have between this two tables.
On the other hand, following one of the tutorials I've found, *"Developing RIA Web Applications with Oracle ADF"*, I've noticed that when I was creating Business Components from Tables based on the HR schema, all the Links and Associations were created as they were expected. I've also tried to create the same Business Components from Tables in my own project, and all the Links and Associations were in place. Somehow, it's not working for my particular schema (the one that contains PATIENTS and COUNTRIES).
Is there something I do wrong? I've made sure that all the FK constraints are enabled, alive and kicking. From my point of view, the tables are working and behavig as they should, but I can't understand why that feature of automatically creating the Links and Associations works on the HR schema but not on mine.
Please help!
Bogdan.
PS: I am using Oracle JDeveloper Studio Edition Version 11.1.1.1.0, Oracle SQL Developer Version 1.5.5, and Oracle 10g Express Edition installed on localhost.

Hello John,
Of course I can post the scripts.
The schema name is "TEST". But you should know that there are some extra columns in the PATIENTS table, I've not mentioned before. As you can tell from the scripts bellow, the PATIENTS table has the following columns: ID (number), NAME (varchar2), COUNTRY (number), GENDER (number), ADMISSIONDATE (date), DIAGNOSTIC (number), FIRSTNAME (varchar2), SALARY (number). There are actually 3 FK constraints, I've only mentioned one for the simplifying the example. The first FK constraint is towards COUNTRIES, the second one is towards GENDERS, and the final one is towards DIAGNOSTICS. All this 3 tables have only two columns (ID as number, and GENDER as varchar2). I will post the scripts for all.
Here is the output of the Export DDL to Clipboard from SQL Developer for the COUNTRIES table:
CREATE TABLE "TEST"."COUNTRIES"
(     "ID" NUMBER NOT NULL ENABLE,
     "NAME" VARCHAR2(1000 BYTE) NOT NULL ENABLE,
     CONSTRAINT "COUNTRIES_UK1" UNIQUE ("NAME")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
     CONSTRAINT "COUNTRIES_PK" PRIMARY KEY ("ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."COUNTRIES_PK" ON "TEST"."COUNTRIES" ("ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."COUNTRIES_UK1" ON "TEST"."COUNTRIES" ("NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE OR REPLACE TRIGGER "TEST"."COUNTRIES_TRG"
BEFORE INSERT ON COUNTRIES
FOR EACH ROW
BEGIN
SELECT COUNTRIES_SEQ.NEXTVAL INTO :NEW.ID FROM DUAL;
END;
ALTER TRIGGER "TEST"."COUNTRIES_TRG" ENABLE;
Here is the same output for the GENDERS table:
CREATE TABLE "TEST"."GENDERS"
(     "ID" NUMBER NOT NULL ENABLE,
     "NAME" VARCHAR2(50 BYTE) NOT NULL ENABLE,
     CONSTRAINT "GENDERS_PK" PRIMARY KEY ("ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
     CONSTRAINT "GENDERS_UK1" UNIQUE ("NAME")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."GENDERS_PK" ON "TEST"."GENDERS" ("ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."GENDERS_UK1" ON "TEST"."GENDERS" ("NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE OR REPLACE TRIGGER "TEST"."GENDERS_TRG"
BEFORE INSERT ON GENDERS
FOR EACH ROW
BEGIN
SELECT GENDERS_SEQ.NEXTVAL INTO :NEW.ID FROM DUAL;
END;
ALTER TRIGGER "TEST"."GENDERS_TRG" ENABLE;
Here is the same output for the DIAGNOSTICS table:
CREATE TABLE "TEST"."DIAGNOSTICS"
(     "ID" NUMBER NOT NULL ENABLE,
     "NAME" VARCHAR2(1000 BYTE) NOT NULL ENABLE,
     CONSTRAINT "DIAGNOSTICS_PK" PRIMARY KEY ("ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
     CONSTRAINT "DIAGNOSTICS_UK1" UNIQUE ("NAME")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."DIAGNOSTICS_PK" ON "TEST"."DIAGNOSTICS" ("ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."DIAGNOSTICS_UK1" ON "TEST"."DIAGNOSTICS" ("NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE OR REPLACE TRIGGER "TEST"."DIAGNOSTICS_TRG"
BEFORE INSERT ON DIAGNOSTICS
FOR EACH ROW
BEGIN
SELECT DIAGNOSTICS_SEQ.NEXTVAL INTO :NEW.ID FROM DUAL;
END;
ALTER TRIGGER "TEST"."DIAGNOSTICS_TRG" ENABLE;
And finally, here is the same output for the PATIENTS table:
CREATE TABLE "TEST"."PATIENTS"
(     "ID" NUMBER NOT NULL ENABLE,
     "NAME" VARCHAR2(1000 BYTE) NOT NULL ENABLE,
     "COUNTRY" NUMBER,
     "GENDER" NUMBER,
     "ADMISSIONDATE" DATE,
     "DIAGNOSTIC" NUMBER,
     "FIRSTNAME" VARCHAR2(1000 BYTE),
     "SALARY" NUMBER,
     CONSTRAINT "PATIENTS_PK" PRIMARY KEY ("ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
     CONSTRAINT "PATIENTS_UK1" UNIQUE ("NAME", "ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
     CONSTRAINT "PATIENTS_GENDERS_FK1" FOREIGN KEY ("GENDER")
     REFERENCES "TEST"."GENDERS" ("ID") ENABLE,
     CONSTRAINT "PATIENTS_DIAGNOSTICS_FK1" FOREIGN KEY ("DIAGNOSTIC")
     REFERENCES "TEST"."DIAGNOSTICS" ("ID") ENABLE,
     CONSTRAINT "PATIENTS_COUNTRIES_FK1" FOREIGN KEY ("COUNTRY")
     REFERENCES "TEST"."COUNTRIES" ("ID") ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE INDEX "TEST"."PATIENTS_INDEX1" ON "TEST"."PATIENTS" ("NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."PATIENTS_PK" ON "TEST"."PATIENTS" ("ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."PATIENTS_UK1" ON "TEST"."PATIENTS" ("NAME", "ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE OR REPLACE TRIGGER "TEST"."PATIENTS_TRG"
BEFORE INSERT ON PATIENTS
FOR EACH ROW
BEGIN
SELECT PATIENTS_SEQ.NEXTVAL INTO :NEW.ID FROM DUAL;
END;
ALTER TRIGGER "TEST"."PATIENTS_TRG" ENABLE;
If a complete DB dump would be more helpful, please let me know. I am willing to provide any details.
Thanks for your support.

How can I make the Counter move from inside text box to inside Footer?

I am tweaking a page. At this point, I cannot move the Counter and the Email Me icon from the bottom of the text box to inside the footer like someone here said he does.
Why do the Counter and the Email Me icon resist being moved?
I am in Graphics mode. I never had this problem before.
— Lorna in Southern California

Lorna,
I'm not sure why you can't move it down into the
footer — by inside the text box, do you mean the page
"content" or "body" section, or did you somehow get
the icons into a text box? I know that you can
"force" a text box into the footer (or header) by
selecting it, then dragging it while holding the
command (Apple) key down at the same time.
Hope this helps.
Bob
Bob,
When I say Text box maybe I am not using the right word. I am referring to that entire space on the page which is dedicated to receiving documents or images. If you have a lot of pictures or words, then that text box/space has to be lengthened to accomodate.
I am saying that the two icons -- Counter and Email Me -- are sitting (or were sitting. It's morning now and honestly, I can't recall from last night!) at the very bottom of the text box/space.
I made a Footer (55 pixels) specially to accomodate the Counter and Email icons. The problem, as stated, was/is that those icons would not budge from where they were sitting.
— Lorna in Southern California

How to save the selected records from Table control in dialog programming

Hiiiiiiii Every1
Actually the problem is like this:-
I have to select some records from table control and then want to save the selected records in DB table.
Example
I have some rows having inforamtion bout employees...
Now what i want is that when i click on 'SAVE' button then these selected rows should be moved into DB table.
Sachin Dhingra

see below example, I have added INSERT option after DELETE option.
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA cols LIKE LINE OF flights-cols.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
TABLES demo_conn.
SELECT * FROM spfli INTO TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'TOGGLE'.
      LOOP AT flights-cols INTO cols WHERE index GT 2.
        IF cols-screen-input = '0'.
          cols-screen-input = '1'.
        ELSEIF cols-screen-input = '1'.
          cols-screen-input = '0'.
        ENDIF.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDLOOP.
    WHEN 'SORT_UP'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'SORT_DOWN'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'DELETE'.
      READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          DELETE itab.
        ENDLOOP.
      ENDIF.
    WHEN 'INSERT'.
      READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          itab1 = itab.
          modify itab1.
        ENDLOOP.
      ENDIF.
      if not itab1 is initial.
        INSERT dbtab FROM TABLE itab1.
      endif.
ENDCASE.
ENDMODULE.

Searching paragraphs using automator and deleting the search results from the original body of text

How do I search paragraphs of a text document using automator and then have the search results deleted from the text document after those search results are exported to a textedit document?

How do I search paragraphs of a text document using automator and then have the search results deleted from the text document after those search results are exported to a textedit document?

SUM the COUNT RESULTS from 2 Tables

Similar Messages

Maybe you are looking for