Summary listing embedded in report detail

Post Author: scourge
CA Forum: Crystal Reports
I have a CR9 report that is a Job Traveller. It has a header area with the Job Information, currently below that is the 'detail' information, which is each operation listed, with barcode and other detail information below. Embedded in the detail of the report is a subreport that is used to pick up notes from the ERP system and print them on the Traveller.
A a request has been made to print some summary data between the header and the detail of the report. What is needed is to print a line for each operation along with the description of the operation and some 'clear' area for the user to make notes in. Then this would be followed up by the actual existing detail of the report, the same operation numbers listed in order with the same detail.
I do not know how to make this work. I already have one sub-report and CR only allows one in a report. How can I do what I want to do with this? Any ideas would be greatly appreciated.
thanks
scourge

Yes, you can suppress tha printing of the detail frame with a user parameter if they requested such. The suppressing PL/SQL code could go in format trigger property returning a false if it needs to be hidden/suppressed.
good luck,
Srinivas

Similar Messages

I Need interactive report to list the purchase orders details for a vendor

I Need interactive report to list the purchase orders details for a vendor that has interactive drill down options to give the detail of vendor from vendor master.

Hi
see this sample report
this is Customer wise sales orders
just make similar report just using LFA1, EKKO and EKPO tables instead of KNA1,VBAK,VBAP
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Regards
Anji

Require details or list of seeded reports and import programs in fusion HCM

Hello All,
Kindly provide me the list of seeded reports and Import programs available in Oracle Fusion HCM .
Regards,
S Rao

Please raise a SR

RG1 summary of Finished goods-report.

Hi Folks,
RG1 summary of Finished goods-report.
The closing balance for a particular material number during the month Jan 2007 is showing 1.00 but the opening balance for the same material number during the month February 2007 is showing 0.00 but not 1.00.
I mean to say the closing balance in January 2007 is not carrying forward into the month Feb 2007.May I know how to go ahead with this problem.
What is the concept of UPDATE RULES of the table.?
The previous developer has developed the following report.
REPORT zxxx MESSAGE-ID z_apd.
*& Includes *
INCLUDE <icon>.
*& Tables *
TABLES : j_1irg1,
j_2irg1bal,
z2irg1bal,
ser03,
objk.
*& Selection Screen *
SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS : p_exgrp TYPE j_1irg1-exgrp OBLIGATORY,
p_stdate LIKE sy-datum OBLIGATORY,
p_endate LIKE sy-datum OBLIGATORY.
SELECT-OPTIONS s_chapid FOR j_1irg1-chapid .
SELECTION-SCREEN : END OF BLOCK blk1.
*& Data Declaration *
Internal Tables
DATA : it_display TYPE TABLE OF zj1irg1,
it_final TYPE TABLE OF zj1irg1,
it_alv TYPE TABLE OF zj1irg1,
Work Areas
wa_display TYPE zj1irg1,
wa_alv TYPE zj1irg1,
it_display1 TYPE TABLE OF zj1irg1,
wa_display1 TYPE zj1irg1,
wa_alv1 TYPE zj1irg1.
DATA: BEGIN OF it_itab OCCURS 0.
INCLUDE STRUCTURE zj1irg1.
DATA: END OF it_itab.
DATA : BEGIN OF itab1 OCCURS 0,
matnr LIKE j_1irg1-matnr,
END OF itab1.
DATA : BEGIN OF itab2 OCCURS 0,
cpudt LIKE j_1irg1-cpudt,
END OF itab2.
DATA : BEGIN OF itab3 OCCURS 0.
INCLUDE STRUCTURE j_1irg1.
DATA: END OF itab3.
DATA : itab4 LIKE j_1irg1 OCCURS 0 WITH HEADER LINE,
itab5 LIKE j_1irg1 OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF itab6 OCCURS 0.
INCLUDE STRUCTURE j_1irg1.
DATA : sernr LIKE objk-sernr.
DATA: END OF itab6.
DATA : BEGIN OF itab61 OCCURS 0.
INCLUDE STRUCTURE j_1irg1.
DATA: sernr LIKE objk-sernr.
DATA: END OF itab61.
DATA : itab7 LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE,
it_bal LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE,
it_bal1 LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE.
DATA: qty_menge LIKE j_1irg1-menge,
iss_menge LIKE j_1irg1-menge,
tot_menge LIKE j_1irg1-menge,
op_menge LIKE j_1irg1-menge,
matnr LIKE j_1irg1-matnr,
exgrp LIKE j_1irg1-exgrp ,
cpudt LIKE j_1irg1-cpudt.
*for checcking lines of itab
DATA: n1 TYPE i.
Others
DATA : v_bwart TYPE mseg-bwart,
v_index TYPE i,
v_index1 TYPE i,
count(4) TYPE n VALUE '0',
neg TYPE char1 VALUE '-',
menge TYPE char16,
count_1 TYPE i,
count_2 TYPE i,
count_3 TYPE i,
count12(4) TYPE n VALUE '0',
count13(4) TYPE n VALUE '0'.
*Ranges
RANGES: v_bwart1 FOR mseg-bwart.
For ALV Display
DATA : gs_variant TYPE disvariant,
gs_layout TYPE lvc_s_layo,
c_stk TYPE scrfname VALUE 'ZRG1',
custom_container TYPE REF TO cl_gui_custom_container.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA : grid1 TYPE REF TO cl_gui_alv_grid,
event_receiver TYPE REF TO lcl_event_receiver,
ok_code TYPE sy-ucomm,
it_fieldcatalog TYPE lvc_t_fcat,
wafieldcatlog TYPE LINE OF lvc_t_fcat,
lt_rows TYPE lvc_t_row,
wa_rows TYPE LINE OF lvc_t_row.
*& Start of Selection *
START-OF-SELECTION.
IMPORT s_chapid FROM MEMORY ID 'SCHAPID'.
PERFORM get_data.
IF it_display[] IS INITIAL.
No Details Available
MESSAGE i017(z_apd) WITH text-005.
STOP.
ELSE.
Display the Details on the Screen
sort it_display by matnr.
*sort it_display by cpudt RISINDR RISINDI matnr.
LOOP AT it_display INTO wa_display.
ON CHANGE OF wa_display-matnr.
*insert
*Check record exits
SELECT SINGLE * FROM z2irg1bal
WHERE
exgrp = exgrp AND
matnr = matnr AND
form = 'P' AND
cb_finish = tot_menge AND
datum = cpudt.
*If record does not exists
*Update balance Table.
IF count12 GE 1.
IF sy-subrc NE 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
INSERT z2irg1bal ."values wa_display.
COMMIT WORK.
ENDIF.
Start of Insertion
IF sy-subrc EQ 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
UPDATE z2irg1bal SET cb_finish = z2irg1bal-cb_finish
WHERE exgrp = z2irg1bal-exgrp AND
datum = z2irg1bal-datum AND
matnr = z2irg1bal-matnr AND
form = 'P'.
ENDIF.
End of Insertion.
ENDIF.
CLEAR: qty_menge,
iss_menge,
tot_menge,
count,
matnr,
cpudt,
exgrp.
ENDON.
loop at itab6.
AT NEW matnr.
v_index = 1.
count = count + 1 .
ENDAT.
IF v_index = 1.
CLEAR v_index.
*INsert for adding start
IF wa_display-risind = 'R'.
*wa_display-OP_FINISH = wa_display-OP_FINISH +
wa_display-CB_FINISH +
wa_display-MENGE.
wa_display-op_finish = wa_display-menge.
qty_menge = wa_display-op_finish.
IF wa_display-status = space.
tot_menge = tot_menge + qty_menge + wa_display-cb_finish .
ELSE.
tot_menge = tot_menge - qty_menge + wa_display-cb_finish.
ENDIF.
*tot_menge = op_menge.
op_menge = tot_menge.
ELSE.
*Qty Issued
wa_display-op_bond = wa_display-op_finish - wa_display-menge.
IF wa_display-op_bond LT 0.
iss_menge = wa_display-op_bond.
iss_menge = ABS( iss_menge ).
*Start of modification
tot_MENGE = tot_MENGE - iss_MENGE ."
IF count LE 1.
tot_menge = wa_display-cb_finish - iss_menge ."
ELSE.
tot_menge = tot_menge - iss_menge ."
ENDIF.
*End of modification
op_menge = tot_menge.
ENDIF.
ENDIF.
*wa_display-MENGE_FINI = wa_display-OP_FINISH - wa_display-OP_BOND.
*tot_MENGE = tot_MENGE + qty_MENGE - iss_MENGE .
wa_display-menge_fini = tot_menge.
**matnr for insert
matnr = wa_display-matnr.
*excise group
exgrp = wa_display-exgrp.
*Date
cpudt = wa_display-cpudt.
*Opening Balance
*Insert start
*if count le 1.
if wa_display-RISIND = 'R'.
wa_display-CB_FINISH = wa_display-CB_FINISH + qty_MENGE.
else.
wa_display-CB_FINISH = wa_display-CB_FINISH - iss_MENGE.
endif.
*endif.
*Insert End
IF count GT 1.
IF wa_display-risind = 'R'.
wa_display-cb_finish = tot_menge - qty_menge.
ELSE.
wa_display-cb_finish = tot_menge + iss_menge.
ENDIF.
ENDIF.
*check it_display-SERIALNO = wa_display-SERIALNO.
MODIFY it_display FROM wa_display.
*INsert for adding end
*move-corresponding wa_display to it_itab.
*append it_itab.
*check it_itab-SERIALNO = wa_display-SERIALNO.
*if sy-subrc = 0.
*endif.
*Insert to update closng to balance to Rg1bal table
*start
count12 = count12 + 1.
*for last record
AT LAST.
*Check record exits
SELECT SINGLE * FROM z2irg1bal
WHERE
exgrp = exgrp AND
matnr = matnr AND
form = 'P' AND
cb_finish = tot_menge AND
datum = cpudt.
*If record does not exists
*Update balance Table.
IF count12 GE 1.
IF sy-subrc NE 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
INSERT z2irg1bal ."values wa_display.
COMMIT WORK.
Start of Insertion
IF sy-subrc EQ 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
UPDATE z2irg1bal SET cb_finish = z2irg1bal-cb_finish
WHERE exgrp = z2irg1bal-exgrp AND
datum = z2irg1bal-datum AND
matnr = z2irg1bal-matnr AND
form = 'P'.
ENDIF.
End of Insertion
ENDIF.
ENDIF.
ENDAT.
*Insert to update closng to balance to Rg1bal table
*end
MOVE-CORRESPONDING wa_display TO wa_alv.
APPEND wa_alv TO it_alv.
append itab6 to it_alv.
ENDIF.
ENDLOOP.
loop at it_alv into wa_alv.
wa_alv-exgrp = wa_alv-exgrp.
wa_alv-SYEAR = wa_alv-syear.
wa_alv-SERIALNO = wa_alv-SERIALNO.
endloop.
EXPORT it_alv TO MEMORY ID 'ABCD'.
call screen 100.
ENDIF.
*& End of Selection *
END-OF-SELECTION.
*& Class Definition *
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm,
handle_double_click
FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column.
PRIVATE SECTION.
ENDCLASS. "lcl_event_receiver DEFINITION
*& Class Implementation *
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Local Variables
DATA: ls_toolbar TYPE stb_button.
append a separator to normal toolbar
CLEAR ls_toolbar.
MOVE 3 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
append an icon to to show printing
CLEAR ls_toolbar.
MOVE 'PRINT' TO ls_toolbar-function.
MOVE icon_print TO ls_toolbar-icon.
MOVE 'Print Receipts' TO ls_toolbar-quickinfo.
MOVE ' Print' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD. " Handle_toolbar
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'PRINT'.
REFRESH : lt_rows , it_final.
CALL METHOD grid1->get_selected_rows
IMPORTING
et_index_rows = lt_rows.
CALL METHOD cl_gui_cfw=>flush.
LOOP AT lt_rows INTO wa_rows.
READ TABLE it_alv INDEX wa_rows-index INTO wa_alv.
LOOP AT it_display INTO wa_display
WHERE mblnr = wa_alv-mblnr.
APPEND wa_display TO it_final.
ENDLOOP.
ENDLOOP.
perform display_form.
ENDCASE.
ENDMETHOD. "handle_user_command
METHOD handle_double_click.
IF e_column = 'MBLNR'.
READ TABLE it_alv INDEX e_row-index INTO wa_alv.
IF sy-subrc = 0.
REFRESH it_final.
LOOP AT it_display INTO wa_display
WHERE mblnr = wa_alv-mblnr.
APPEND wa_display TO it_final.
ENDLOOP.
PERFORM call_migo.
ENDIF.
ENDIF.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
*& Form get_data
text
--> p1 text
<-- p2 text
FORM get_data .
*Select only for matnr and chapid from table
SELECT matnr FROM j_1irg1
APPENDING CORRESPONDING FIELDS OF TABLE itab1
WHERE exgrp = p_exgrp
AND
WERKS = P_WERKS
and
MATNR in s_MATNR
and
CPUDT in s_CPUDT.
cpudt BETWEEN p_stdate AND p_endate
AND
*Chapid
chapid IN s_chapid
ORDER BY matnr.
SORT itab1 BY matnr. " for performance
DELETE ADJACENT DUPLICATES FROM itab1 COMPARING matnr .
SELECT cpudt FROM j_1irg1
APPENDING CORRESPONDING FIELDS OF TABLE itab2
WHERE exgrp = p_exgrp
AND
cpudt BETWEEN p_stdate AND p_endate
AND
*Chapid
chapid IN s_chapid
ORDER BY cpudt.
SORT itab2 BY cpudt. " for Performance
DELETE ADJACENT DUPLICATES FROM itab2 COMPARING cpudt .
LOOP AT itab1.
LOOP AT itab2.
*on change of itab1-matnr or itab2-cpudt.
*select * from J_1IRG1
CLEAR itab3.
SELECT * FROM j_1irg1
*into itab3
APPENDING CORRESPONDING FIELDS OF TABLE itab3
WHERE matnr = itab1-matnr
AND
cpudt = itab2-cpudt.
*count = count + 1.
IF sy-subrc EQ 0.
LOOP AT itab3.
*count = count + 1.
*READ TABLE itab3 INDEX count."1.
IF itab3-risind = 'R'.
MOVE-CORRESPONDING itab3 TO itab4.
APPEND itab4.
DELETE itab3.
MOVE-CORRESPONDING itab4 TO itab6.
APPEND itab6.
CLEAR itab4.
ELSE.
MOVE-CORRESPONDING itab3 TO itab5.
APPEND itab5.
DELETE itab3.
MOVE-CORRESPONDING itab5 TO itab6.
APPEND itab6.
CLEAR itab5.
ENDIF.
ENDLOOP.
ENDIF.
*endon.
ENDLOOP.
ENDLOOP.
SELECT * FROM z2irg1bal
APPENDING CORRESPONDING FIELDS OF TABLE itab7
WHERE exgrp = p_exgrp
AND
datum LE p_stdate
ORDER BY datum.
SORT itab7 BY datum.
DELETE ADJACENT DUPLICATES FROM itab7 COMPARING datum .
*insert Start
LOOP AT itab6.
DELETE itab7 WHERE matnr NE itab6-matnr.
ENDLOOP.
*insert End
*insert Start
LOOP AT itab6.
CLEAR itab61. REFRESH itab61.
CLEAR wa_display.
MOVE-CORRESPONDING itab6 TO wa_display.
EQPT Serno
count13 = 1.
SELECT SINGLE obknr FROM ser03 INTO ser03-obknr WHERE
mblnr EQ itab6-mblnr
AND mjahr EQ itab6-mjahr.
IF sy-subrc EQ 0.
SELECT sernr FROM objk INTO CORRESPONDING
FIELDS OF TABLE itab61 WHERE
obknr EQ ser03-obknr.
DESCRIBE TABLE itab61 LINES n1.
*do N1 times.
LOOP AT itab61.
IF count13 EQ 1.
wa_display-sernr = itab61-sernr.
ENDIF.
IF count13 EQ 2.
wa_display-sernr1 = itab61-sernr.
ENDIF.
IF count13 EQ 3.
wa_display-sernr2 = itab61-sernr.
ENDIF.
IF count13 EQ 4.
wa_display-sernr3 = itab61-sernr.
ENDIF.
IF count13 EQ 5.
wa_display-sernr4 = itab61-sernr.
ENDIF.
IF count13 EQ 6.
wa_display-sernr5 = itab61-sernr.
ENDIF.
IF count13 EQ 7.
wa_display-sernr6 = itab61-sernr.
ENDIF.
if count13 eq 8.
objk-SERNR8 = objk-SERNR.
endif.
if count13 eq 9.
objk-SERNR9 = objk-SERNR.
endif.
count13 = count13 + 1.
endselect.
ENDLOOP.
*enddo.
ENDIF.
endif.
*End of Modification Eqpt Serial No
MOVE-CORRESPONDING itab6 TO wa_display.
SELECT * FROM z2irg1bal
APPENDING CORRESPONDING FIELDS OF TABLE it_bal1
WHERE matnr = itab6-matnr
AND datum LE p_stdate
AND exgrp = itab6-exgrp.
SORT it_bal1 DESCENDING .
READ TABLE it_bal1 INDEX 1.
ON CHANGE OF itab6-matnr .
wa_display-cb_finish = it_bal1-cb_finish.
ENDON.
AT LAST ."matnr.
wa_display-cb_finish = it_bal1-cb_finish.
ENDAT.
APPEND wa_display TO it_display .
CLEAR wa_display-cb_finish.
CLEAR it_bal1. REFRESH it_bal1.
ENDLOOP.
SELECT * FROM j_1irg1
APPENDING CORRESPONDING FIELDS OF TABLE it_itab
WHERE exgrp = p_exgrp
AND
cpudt BETWEEN p_stdate AND p_endate.
DESCRIBE TABLE it_itab[] LINES count_1.
count_3 = count_1 + 1.
DESCRIBE TABLE it_display[] LINES count_2.
IF it_display IS NOT INITIAL.
DELETE it_display FROM count_3 TO count_2.
ENDIF.
*start of insertion
DELETE it_display WHERE status = 'C'.
LOOP AT it_display INTO wa_display.
CLEAR wa_display-cb_finish.
MODIFY it_display FROM wa_display.
ON CHANGE OF wa_display-matnr .
SELECT * FROM z2irg1bal
INTO CORRESPONDING FIELDS OF TABLE it_bal1
WHERE matnr = wa_display-matnr
AND datum LE p_stdate
AND exgrp = wa_display-exgrp.
IF sy-subrc = 0.
SORT it_bal1 DESCENDING .
READ TABLE it_bal1 INDEX 1.
wa_display-cb_finish = it_bal1-cb_finish.
MODIFY it_display FROM wa_display.
ENDIF.
ENDON.
ENDLOOP.
*End of insertion
ENDFORM. " get_data
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ZRG1'.
SET TITLEBAR 'ZRG1'.
DATA: lt_exclude TYPE ui_functions.
IF custom_container IS INITIAL.
Create the Custom Container
CREATE OBJECT custom_container
EXPORTING
container_name = c_stk.
Create an instance of alv control
CREATE OBJECT grid1
EXPORTING
i_parent = custom_container.
Layout Settings
gs_layout-sel_mode = 'A'. " Multiple Lines
MOVE 'RG1 Register' TO gs_layout-grid_title.
Prepare the Field Catalog
PERFORM prepare_catalog.
To Exclude the PRINT Button from the Standard toolbar of ALV
PERFORM exclude_tb_functions CHANGING lt_exclude.
Display the List for ALV Display
CALL METHOD grid1->set_table_for_first_display
EXPORTING
it_toolbar_excluding = lt_exclude
is_layout = gs_layout
CHANGING
it_fieldcatalog = it_fieldcatalog[]
it_outtab = it_alv[].
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_user_command FOR grid1.
SET HANDLER event_receiver->handle_toolbar FOR grid1.
SET HANDLER event_receiver->handle_double_click FOR grid1.
CALL METHOD grid1->set_toolbar_interactive.
ENDIF.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid1.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form exclude_tb_functions
text
<--P_LT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
Local Varaibles
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_print.
APPEND ls_exclude TO pt_exclude.
ENDFORM. " exclude_tb_functions
*& Form prepare_catalog
text
--> p1 text
<-- p2 text
FORM prepare_catalog .
DATA : v_index TYPE i.
*Entry Date
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CPUDT'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'RG1 Entry Date'.
wafieldcatlog-reptext = 'RG1 Entry Date'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Serial No
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERIALNO'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'RG1 serial number'.
wafieldcatlog-reptext = 'RG1 serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CHAPID'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Chapter ID'.
wafieldcatlog-reptext = 'Chapter ID'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MBLNR'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Number of Material Document'.
wafieldcatlog-reptext = 'Number of Material Document'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Item
v_index = v_index + 1.
wafieldcatlog-fieldname = 'ZEILE'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Item in Material Document'.
wafieldcatlog-reptext = 'Item in Material Document'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'BWART'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Movement Type'.
wafieldcatlog-reptext = 'Movement Type'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MENGE'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Quantity'.
wafieldcatlog-reptext = 'Quantity'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
wafieldcatlog-DO_SUM = 'X'.
append wafieldcatlog to it_fieldcatalog.
clear wafieldcatlog-reptext.
clear wafieldcatlog-key.
*Base Unit of Measure
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MEINS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Base Unit of Measure'.
wafieldcatlog-reptext = 'Base Unit of Measure'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
wafieldcatlog-do_sum = 'X'.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'RISIND'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Goods Movement Direction'.
wafieldcatlog-reptext = 'Goods Movement Direction'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Material Number
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MATNR'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Material Number'.
wafieldcatlog-reptext = 'Material Number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*CB_FINISH
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CB_FINISH'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Opening Balance'.
wafieldcatlog-reptext = 'Opening Balance'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*materail manufactured
v_index = v_index + 1.
wafieldcatlog-fieldname = 'OP_FINISH'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Qty Manufactured'.
wafieldcatlog-reptext = 'Qty Manufactured'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Material Issued
v_index = v_index + 1.
wafieldcatlog-fieldname = 'OP_BOND'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Qty Issue'.
wafieldcatlog-reptext = 'Qty Issue'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Total
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MENGE_FINI'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Closing Balance'.
wafieldcatlog-reptext = 'Closing Balance'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Material Description
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MAKTX'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Material Description'.
wafieldcatlog-reptext = 'Material Description'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Storage Location
v_index = v_index + 1.
wafieldcatlog-fieldname = 'LGORT'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Storage Location'.
wafieldcatlog-reptext = 'Storage Location'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Goods Movement Direction
v_index = v_index + 1.
wafieldcatlog-fieldname = 'RISIND'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Goods Movement Direction'.
wafieldcatlog-reptext = 'Goods Movement Direction'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Reference Document 1
v_index = v_index + 1.
wafieldcatlog-fieldname = 'RDOC1'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Reference Document 1'.
wafieldcatlog-reptext = 'Reference Document 1'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Excise Duty Base Amount
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXBAS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Excise Duty Base Amount'.
wafieldcatlog-reptext = 'Excise Duty Base Amount'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Basic Excise Duty
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXBED'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Basic Excise Duty'.
wafieldcatlog-reptext = 'Basic Excise Duty'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Additional Excise Duty
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXAED'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Additional Excise Duty'.
wafieldcatlog-reptext = 'Additional Excise Duty'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Special Excise Duty
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXSED'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Special Excise Duty'.
wafieldcatlog-reptext = 'Special Excise Duty'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Cess amount
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CESS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Cess amount'.
wafieldcatlog-reptext = 'Cess amount'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*ECS Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'ECS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'ECS Value'.
wafieldcatlog-reptext = 'ECS Value'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
**Register Entry Status
v_index = v_index + 1.
wafieldcatlog-fieldname = 'STATUS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Register Entry Status'.
wafieldcatlog-reptext = 'Register Entry Status'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
append wafieldcatlog to it_fieldcatalog.
clear wafieldcatlog-reptext.
clear wafieldcatlog-key.
*EQPT Serno 1 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 2 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR1'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 3 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR2'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 4 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR3'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 5 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR4'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 6 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR5'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 7 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR6'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
ENDFORM. " prepare_catalog
*& Module USER_COMMAND_0100 INPUT
text
MODULE user_command_0100 INPUT.
IF ok_code = 'EXIT'.
CALL METHOD grid1->free.
CALL METHOD cl_gui_cfw=>flush.
leave program .
LEAVE TO SCREEN 0.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form call_migo
text
--> p1 text
<-- p2 text
FORM call_migo .
CALL FUNCTION 'MIGO_DIALOG' "n547170
EXPORTING "n547170
i_action = 'A04' "n547170
i_refdoc = 'R02' "n547170
i_notree = 'X' "n547170
i_no_auth_check = ' ' "n547170
i_deadend = 'X' "n547170
i_skip_first_screen = 'X' "n547170
i_okcode = 'OK_GO' "n547170
i_mblnr = wa_alv-mblnr "n547170
i_mjahr = wa_alv-mjahr . "n547170
ENDFORM. " call_migo

T.Code: MB5B
Regards,
Rajesh Banka
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

Hiding the summary list on workflow

Hi
Does anyone know how to hide the summary list that appears at the end of the workflow. My workflow is pickup up all details from the invoice and I dont' want to also show the summary list as it has duplicate content.
thanks
deb

Hey doodlefish008,
I don't see how this would be possible unless you use Embedded CSS to target an ID and hide it. However, most email providers do not support this so it's not recommened and pointless really.
I'll leave this forum thread open for further and alternative suggestions input from our community.
Cheers.

No Data in Reports Details in Custom date range

Hello, iTunes U Public Site Manager Admins.
As the iTunes U Public Site Manager admin, I've been trying to access our institution's iTunes U Reports Details for a couple of days. (I send a monthly report of usage to our course/collection contributors.) When I custom the date range, under Details, there is zero entry; "No data available in table" message is shown.
This feature had been working well since Apple iTunes U added this enhancement on August 13, 2013. The report Details showed the exact stats for Browse, Subscribe, Download, Stream, and Enclosure for each course/collection in the custom date range.
Now under "Details", the data is shown only when the date range is Last 30 Days. It shows no data in custom date range when the Calendar is used to select a Start Date and End Date.
Has anyone else noticed this problem?
Thanks.
Q. Wang

Erik.
I used your suggestion and it worked very well. This is how I did it.
Export the range of data that includes Feb. 1-Feb. 28, 2014 as .tsv file.
Open that file in Excel.
Add a blank column next to the Date column. Use function =Month() to just extract the month into the new column. Fill down the whole column. Then copy and paste special (value) into the same column (I have over 26,000 rows of data in the file.) Converting to Value will allow for the next step of PivotTable.
Create a PivotTable for the 26,000 rows of data. Use Month as the Report filter, iTunes_ID as the Row Labels, Select Browse, Subscribe, etc. as the Sum Values. (The result is a summary table with about 200 rows.)
I then do a Vlookup to my premade Master file to add Category (course, collection, resources) and Instructor Name to each of the 200 rows.
That will do it for my monthly report.
Thanks for your tip again. I did not know the .tsv file would have DATE for each item.
Sincerely,
Q. Wang

Project Summary and Base Calendar Reports Error Message when Saving to Desktop from Server

We have a user that gets the following popup when she attempts to save file from the Server to her desktop:
"The Project Summary and Base Calendar reports cannot be opened, renamed, or deleted". The popup includes a red circle with a white "X" and an "OK" button. The OK button must be clicked 27 times
before the file will eventually save to the desktop.
I have been able to replicate this error when I try to save her file to my desktop, as well.
I can see from the Organizer that the Project Summary and Base Calendar reports are part of the Global, but not part of the file-specific reports while on the Server. This is true for other schedules in our enterprise, so I am not sure why this is
occurring. After performing the save and clicking "OK" 27 times, there is exactly 27 reports listed for this file in the Organizer, but the Project Summary and Base Calendar reports are the only two that did not transfer with the file.
What is going on here and why is it happening for just this file? It feels like we are getting into a contention issue between the local Global.MPT and the Enterprise Global.
We are on Project Server v2010 SP2.

Thanks for your feedback Chris!
When you open the organizer, check that you don't have for the project in question any enterprise object on the project side.
Have you installed the
latest PS2010 CU? A more radical way for reparing a file is to export it as an XML file and save/publish it back on Project Server as an MPP file. But the project UID will change thus it will cause trouble
in case you have timesheets. You could also try to delete the project and restore it (assuming you have the daily backup in place).
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj

Embedding Crystal Reports with parameters in web page

Hi,
I have created a sample report file and configured it with a parameter field. On embedding this report file in the web page, as expected I am prompted to enter value for the parameter. After entering value and clicking OK, CrystalReportViewerServlet delegates the call to the custom JDBC connector implementation which is the data provider. However, the web page doesnu2019t show the retrieved resultset but shows a page with some text like this:
{"update":{"children":[{"children":[
{"args":{"curPage":1,"numPages":"1"},"cons":"bobj.crv.newSelectPageControl"},{"args":{"searchText":""},"cons":"bobj.crv.newSearchTextControl"}
],"cons":"bobj.crv.newToolbar"},{"args":{"displayDrilldownTab":true,"initTabIdx":0},"children":[{"args":{"isMainReport":true,"label":"Main Report","viewStateId":"1"},"children":[{"args":{"content":"\r\n
On debugging I could see, that the parameter value from the prompt is correctly passed from the CrystalReportViewerServlet to the custom Connector (i.e., the sql query is updated with the parameter value) and the connector fetches the data also.
I also tried embedding another .rpt file with few parameter fields configured (where user input values are just passed to the details section of the report for display). However on running this web page also I get the same error.
Report files with no parameter fields configured are working fine when embedded in web page.
Any thoughts would be appreciated.
Regards,
Ria

I would take a look at running our simple [sample application |http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/307224d2-3d11-2c10-fe86-d87bab901bee&overridelayout=true]that views reports to see if you have the issue there.

List of Customized Reports /transaction

Hi All,
We have to get the list of customized reports/transactions which have not been used since 3 months.
Please let me know the way to sort this issue.
Regards,
Prashant

One way is to get the list of transactions/reports used from ST03N and then you can determine which all customized ones were not used.
You can get this from ST03N >> select the day/week/month by double clicking
In the bottom Analysis view, select the transaction profile >> standard.
There you will get the details of transactions used. So, i guess from here, you will be able to get find out which were not used.
Regards,
Jazz

List of discoverer reports

Dear All
Is there any query from which i can find list of discoverer reports and with mention of who all has access to it.
Regards
Musaddaq

Hello,
i you have you workbooks in your EUL (because older version allow to save it on the filesystem), you can query the eul for that.
For Example:
http://www.club-oracle.com/articles/details-of-discoverer-report-by-sql-query-317/
I think with that base you should be able to query what you need.
regards
Peter

What is difference between interactive list and interactive reports?

what is difference between interactive list and interactive reports?

hi check this..
interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
report .
start-of-selection.
write:/ 'this is the source list'.
at line-selection .
if sy-lsind = 1 .
write:/ ' this is the 1st list'.
elseif.
if sy-lsind = 2 .
write:/ ' this is the 2 list'.
if sy-lsind = 3 .
write:/ ' this is the 3 list'.
if sy-lsind = 4 .
write:/ ' this is the 4 list'.
if sy-lsind = 5 .
write:/ ' this is the 5 list'.
if sy-lsind = 6 .
write:/ ' this is the 6 list'.
if sy-lsind = 7 .
write:/ ' this is the 7 list'.
if sy-lsind = 8.
write:/ ' this is the 8 list'.
if sy-lsind = 9 .
write:/ ' this is the 9 list'.
if sy-lsind = 10 .
write:/ ' this is the 10 list'.
endif.
regards,
venkat

Aging report - detailed needs invoice project code

Dear All,
Would it be possible for us to have project code (on A/R invoice header) on Aging report - detailed print layout? I found all fields in Aging report - detailed PLD are sys var. Is there a way for us to figure out which sys var is for project code of the invoice? Thanks a lot.
Regards,
Yuka

Unfortunately you can't, you have to recreate it using crystal. In all SAP std reports you only able to show/print what it already shows.

List of Standard Reports in Purchasing and Inventory

Pls send me list of Standard reports for Purchasing and inventory.
Thanks-Manju

This is duplicate thread (NO POINTS required)
Hello Manjula,
Go to transaction code SAP1, this will show all the reports functional area-wise.
For purchasing reports : Go to Material management --> Purchasing
For Inventory management reports : Go to Material management --> Inventory management
Hope this helps
Regards
Arif Mansuri

How to embedded oracle report data in email body from forms?

Hi,
I am working on oracle forms and report 10g and i am new to this. I want to knw How to embedded oracle report data in email body ?
Regards
Shruti

I have uploaded a sample . This might help
http://www.alexyscorp.com/send_report_email.zip

Summary listing embedded in report detail

Similar Messages

Maybe you are looking for