Sun DS 6.3 Reject same login as password in a password policy

Hi,
It is possible to create a password policy to avoid setting the same user login as the password ? I have been looking at the [administration documentation|http://docs.sun.com/app/docs/doc/820-2763/fhkrj?a=view] for password policies but it seems this isn't possible.
It can be done somehow ?
Thanks.

if you set :
pwd-strong-check-enabled : on
pwd-strong-check-require-charset: any-three
it will require numbers & uppers etc... so therefore password=username wont be allowed anyway.

Similar Messages

  • Why can't I use the same login and password for apps and cloud

    I try to go on to face time and it asks for my login and password which works
    ok with the App Store but is not recognised when using face time or I cloud

    You can, if logged in using the same Apple ID for all.

  • Grace login in password policy

    Hi,
    Anyone knows if grace logins will be implemented in the next version of directory server?
    Rgds,

    Yes, grace logins are implemented in Directory Server 6 (which has a new password policy based on IETF internet-draft).
    Regards,
    Ludovic

  • Creating a login and password in the forms

    I have been trying to create a username and password to access the database that I have created using Form Builder. This is the code that I have created....the syntax is correct but its not performing the task i.e direct the user to a different form
    DECLARE
    LOGINNAME VARCHAR2(20);
    PASWORD VARCHAR2(20);
    BEGIN
    IF LOGINNAME = 'CSR' AND PASWORD = 'CURRIE'
    THEN
    CALL_FORM ('C:\ClothingCloseout\Menu.fmx');
    ELSIF
    LOGINNAME = 'MGMT' AND PASWORD = 'SANDRA'
    THEN
    CALL_FORM ('C:\ClothingCloseout\Menu.fmx');
    END IF;
    END;
    I also tried using the same login and password through which I get connected to teh database but that does not work either....Thanks for the help!!!

    Hi Ashley,
    The compilation is successful because there are no syntax errors. When the code is executed depends on where you have put this code (On-Logon trigger, etc).
    In this situation, it looks like the 'code' has not been executed YET because the event has not been triggered OR it has successfully gone through ie - the IF test for loginname and pasword was not satisfied. Therefore, the call_form was never performed. (Your code does not prompt the user to input 'Loginname' and 'Pasword'). In this case, loginname and pasword are NULLs.
    Regards,
    John

  • Workspace- login and password

    Hi
    I am having problems logging onto workspace and reporting studio..I have got 9.3.1 version installed on my laptop..Shared services is working properly..
    I had been using the same "admin" and "password" for all of them..But, now a days, when I try to log on to workspace using the same login and password, it pops up a message reading "invalid user id or invalid password". can any one pls help me sort this problem...
    Thanks

    You might want to try bouncing Shared Services and Workspace.
    I occassionally have trouble with my VM if I don't shut down properly.
    Regards,
    Cameron Lackpour

  • While send/receive email, I have received an error message "Sending of password d"? However with same login details, I am able to login with other application.

    While send/receive email, I have received an error message "Sending of password d"?
    However with same login details, I am able to login with other application.
    I have changed password still the issue remains as it is.

    https://support.mozilla.org/en-US/kb/cannot-send-messages

  • When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    You can take some of the steps here, #4, #5 or even trying a #18
    Step by Step to fix your Mac
    but I suspect your going to first have to create a data recovery drive
    Create a data recovery, undelete boot drive
    to get your data off the machine,
    then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
    Step by Step to fix your Mac

  • I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

    I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

    I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

  • Different Character sets (Codepages) in the same Login

    Hi,
    I need to enter different character sets (Russian and English) in the same login and save the different characters to SAP database tables.
    The codepage for Russian is different from English codepage. I have Russian codepage language settings on both Windows and SAP. Can anybody let me know how to proceed with this.
    Any pointers on this would be really helpful.
    Thanks and Regards,
    Sirisha

    Hi,
    I need to enter different character sets (Russian and English) in the same login and save the different characters to SAP database tables.
    The codepage for Russian is different from English codepage. I have Russian codepage language settings on both Windows and SAP. Can anybody let me know how to proceed with this.
    Any pointers on this would be really helpful.
    Thanks and Regards,
    Sirisha

  • Oracle express hang up when two or three users are using the same login.

    For developer purposes, we installed the last version of XE, and we are trying to run a small client-server application, but using the same user: login and password in two different remote PC's. The database is installed in an PC dual core with Windows XP SP2 the other PC´s are in the same local area network. The application works fine when the first (doesn't matter wich PC) but when the second or third user tries to connect the database the access from the others crashes.
    Is there a security issue or user limitation in XE to avoid the same login in several remote PC´s.? Have I change a parameter?

    You're right I found "alert_xe.log".
    I don't understand all the messages, but I notice: the "Warning: inbound connection time out". and "LICENSE_MAX_SESSION = 0 LICENSE_SESSIONS_WARNING = 0"
    I copied part of the alert_xe.log as following:
    Fri Feb 08 20:30:51 2008
    WARNING: inbound connection timed out (ORA-3136)
    Fri Feb 08 20:32:27 2008
    Memory Notification: Library Cache Object loaded into SGA
    Heap size 2208K exceeds notification threshold (2048K)
    KGL object name :XDB.XDbD/PLZ01TcHgNAgAIIegtw==
    Fri Feb 08 20:32:58 2008
    WARNING: inbound connection timed out (ORA-3136)
    Fri Feb 08 20:38:19 2008
    WARNING: inbound connection timed out (ORA-3136)
    Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
    Fri Feb 08 20:39:28 2008
    ORACLE V10.2.0.1.0 - Production vsnsta=0
    vsnsql=14 vsnxtr=3
    Windows XP Version V5.1 Service Pack 2
    CPU : 2 - type 586
    Process Affinity : 0x00000000
    Memory (Avail/Total): Ph:758M/1014M, Ph+PgF:2289M/2444M, VA:1944M/2047M
    Fri Feb 08 20:39:28 2008
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Picked latch-free SCN scheme 2
    Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =24
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.1.0.
    System parameters with non-default values:
    processes = 200
    sessions = 225
    __shared_pool_size = 79691776
    __large_pool_size = 8388608
    __java_pool_size = 4194304
    __streams_pool_size = 0
    spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
    sga_target = 268435456
    control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
    __db_cache_size = 171966464
    compatible = 10.2.0.1.0
    db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
    db_recovery_file_dest_size= 10737418240
    undo_management = AUTO
    undo_tablespace = UNDO
    remote_login_passwordfile= EXCLUSIVE
    dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
    shared_servers = 4
    job_queue_processes = 4
    audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
    background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
    user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
    core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
    db_name = XE
    open_cursors = 300

  • My apple tv will not authenticate my nba league pass login--I am in the United States and the same login/pw works for my iPad, but not for apple tv.

    My NBA League Pass login cannot be authenticated -- I am in the United States and the same league pass name and password are working for my iPad, but not for my apple tv.

    I have this same issue and am becoming quite upset. NBA has absolutely no contact information to call and resolve this issue. I just spent $139.99 and cannot connect to Apple TV, while the same login works just fine on my iMac and iPad. When I signed up, the information provided indicated that I could view live games on Apple TV. What the ****?

  • 802.1x multiple sessions with same LOGIN+MAC on single-host port

    We have 802.1x with radius server.
    c2960 configured to allow only one device per port with no Mac-Bypass and no critical auth.
    From time to time user seems to get multiple authentications on single port with single mac-address.
    So we get several sessions on port with the same login, mac (but different session-id).
    Command "dot1x re-auth int" doesn't clear those sessions. Neither do "force-unauthorized" or "shut/noshut". Only thing that helps is reboot switch.
    Happens with different users.
    Anybody seen this issue?
    IOS 12.2(46)SE

    Sure. Tried to make it short.
    Config for 802.1x-aaa:
    aaa new-model
    aaa group server radius default
      server X.X.X.X auth-port 12345 acct-port 12346
    aaa authentication login default group radius enable
    aaa authentication dot1x default group radius
    aaa authorization exec default group radius if-authenticated
    aaa authorization network default local group radius
    aaa authorization reverse-access default group radius
    aaa accounting suppress null-username
    aaa accounting update periodic 1
    aaa accounting dot1x default start-stop group radius
    aaa accounting exec default start-stop group radius
    aaa accounting network default start-stop group radius
    aaa accounting system default start-stop group radius
    aaa session-id common
    dot1x system-auth-control
    interface FastEthernet0/48
    switchport access vlan 1398
    switchport mode access
    dot1x pae authenticator
    dot1x port-control auto
    dot1x violation-mode shutdown
    spanning-tree portfast
    spanning-tree link-type point-to-point
    radius-server attribute 44 include-in-access-req
    radius-server attribute 44 extend-with-addr
    radius-server attribute 188 format non-standard
    radius-server attribute 218 mandatory
    radius-server attribute 32 include-in-accounting-req format %i %h %d
    radius-server attribute 55 include-in-acct-req
    radius-server attribute list att
    attribute 30-31,44
    radius-server host X.X.X.X auth-port 12345 acct-port 12346 key keykeykey
    radius-server vsa send accounting
    sh dot1x int fa 0/48 det
    Dot1x Info for FastEthernet0/48
    PAE                       = AUTHENTICATOR
    PortControl               = AUTO
    ControlDirection          = Both
    HostMode                  = SINGLE_HOST
    Violation Mode            = SHUTDOWN
    ReAuthentication          = Disabled
    QuietPeriod               = 60
    ServerTimeout             = 0
    SuppTimeout               = 30
    ReAuthPeriod              = 3600 (Locally configured)
    ReAuthMax                 = 2
    MaxReq                    = 2
    TxPeriod                  = 30
    RateLimitPeriod           = 0
    Dot1x Authenticator Client List Empty
    Port Status               = UNAUTHORIZED
    And right now, while port is UNAUTHORIZED we have 2 sessions as follows:
    sh aaa user all
    Unique id 34974 is currently in use.
    Accounting:
      log=0x208241
      Events recorded :
        CALL START
        ATTR REPLACE
        NET UP
        INTERIM START
        VPDN NET UP
      update method(s) :
        PERIODIC
      update interval = 60
      Outstanding Stop Records : 0
      Dynamic attribute list:
        0244DC34 0 00000001 connect-progress(44) 4 Auth Open
        0244DC48 0 00000001 pre-session-time(272) 4 0(0)
        0244DC5C 0 00000001 elapsed_time(339) 4 4828941(49AF0D)
        0244DC70 0 00000001 input-giga-words(111) 4 2(2)
        0244DC84 0 00000001 output-giga-words(250) 4 8(8)
        024A8C10 0 00000001 bytes_in(112) 4 119041621(7186E55)
        024A8C24 0 00000001 bytes_out(252) 4 3588031221(D5DD02F5)
        024A8C38 0 00000001 pre-bytes-in(268) 4 7373(1CCD)
        024A8C4C 0 00000001 pre-bytes-out(269) 4 8204(200C)
        024A8C60 0 00000001 paks_in(113) 4 45940138(2BCFDAA)
        024A8CB0 0 00000001 paks_out(253) 4 46979788(2CCDACC)
        024A8CC4 0 00000001 pre-paks-in(270) 4 68(44)
        024A8CD8 0 00000001 pre-paks-out(271) 4 61(3D)
      No data for type EXEC
      No data for type CONN
      NET: Username=(n/a)
        Session Id=000088AD Unique Id=0000889E
        Start Sent=0 Stop Only=N
        stop_has_been_sent=N
        Method List=0
        Attribute list:
          024CAA00 0 00000001 session-id(336) 4 34989(88AD)
          024CAA14 0 00000001 start_time(342) 4 Jan 23 2012 16:22:08
      No data for type CMD
      No data for type SYSTEM
      No data for type RM CALL
      No data for type RM VPDN
      No data for type AUTH PROXY
      8: Username=157102
        Session Id=000088AD Unique Id=0000889E
        Start Sent=1 Stop Only=N
        stop_has_been_sent=N
        Method List=226B3E4 : Name = default
        Attribute list:
          0244DB94 0 00000001 session-id(336) 4 34989(88AD)
          0244DBA8 0 00000001 start_time(342) 4 Jan 23 2012 16:22:08
          0244DBBC 0 00000009 audit-session-id(599) 24 0AC5010200001C45A5C67429
      No data for type IPSEC-TUNNEL
      No data for type RESOURCE
      No data for type 11
      No data for type 12
      No data for type CALL
      No data for type VPDN-TUNNEL
      No data for type VPDN-TUNNEL-LINK
    Debg: No data available
    Radi: 2032FD8
    Interface:
      TTY Num = -1
      Stop Received = 0
      Byte/Packet Counts till Call Start:
        Start Bytes In = 993512241     Start Bytes Out = 3867828098
        Start Paks  In = 23586320      Start Paks  Out = 28511581
      Byte/Packet Counts till Service Up:
        Pre Bytes In = 993519614     Pre Bytes Out = 3867836302
        Pre Paks  In = 23586388      Pre Paks  Out = 28511642
      Cumulative Byte/Packet Counts :
        Bytes In = 1112561235    Bytes Out = 3160900227
        Paks  In = 69526526      Paks  Out = 75491430
      StartTime = 16:22:08 GMT+5 Jan 23 2012
      AuthenTime = 16:22:08 GMT+5 Jan 23 2012
      Component = DOT1X
    Authen: service=8021X type=EAP method=RADIUS
    Kerb: No data available
    Meth: No data available
    PreA: No data available
    General:
      Unique Id = 0000889E
      Session Id = 000088AD
      Attribute List:
        024A8C10 0 00000001 port-type(174) 4 Ethernet
        024A8C24 0 00000009 interface(170) 16 FastEthernet0/48
        024A8C38 0 00000009 dnis(50) 17 00-18-B9-F5-5B-30
        024A8C4C 0 00000009 clid(37) 17 48-5B-39-EA-26-7C
    PerU: No data available
    Unique id 34976 is currently in use.
    Accounting:
      log=0x10000208241
      Events recorded :
        CALL START
        ATTR REPLACE
        NET UP
        INTERIM START
        VPDN NET UP
        SESSION INFO
      update method(s) :
        PERIODIC
      update interval = 60
      Outstanding Stop Records : 0
      Dynamic attribute list:
        024CAA00 0 00000001 connect-progress(44) 4 Auth Open
        024CAA14 0 00000001 pre-session-time(272) 4 2(2)
        024CAA28 0 00000001 elapsed_time(339) 4 4828961(49AF21)
        024CAA3C 0 00000001 input-giga-words(111) 4 2(2)
        024CAA50 0 00000001 output-giga-words(250) 4 8(8)
        024CAAA0 0 00000001 bytes_in(112) 4 119021816(71820F8)
        024CAAB4 0 00000001 bytes_out(252) 4 3588011179(D5DCB4AB)
        024CAAC8 0 00000001 pre-bytes-in(268) 4 6219(184B)
        024CAADC 0 00000001 pre-bytes-out(269) 4 7005(1B5D)
        024CAAF0 0 00000001 paks_in(113) 4 45939933(2BCFCDD)
        0244DB94 0 00000001 paks_out(253) 4 46979618(2CCDA22)
        0244DBA8 0 00000001 pre-paks-in(270) 4 59(3B)
        0244DBBC 0 00000001 pre-paks-out(271) 4 51(33)
      No data for type EXEC
      No data for type CONN
      NET: Username=(n/a)
        Session Id=000088AF Unique Id=000088A0
        Start Sent=0 Stop Only=N
        stop_has_been_sent=N
        Method List=0
        Attribute list:
          024A8C10 0 00000001 session-id(336) 4 34991(88AF)
          024A8C24 0 00000001 start_time(342) 4 Jan 23 2012 16:22:18
      No data for type CMD
      No data for type SYSTEM
      No data for type RM CALL
      No data for type RM VPDN
      No data for type AUTH PROXY
      8: Username=157102
        Session Id=000088AF Unique Id=000088A0
        Start Sent=1 Stop Only=N
        stop_has_been_sent=N
        Method List=226B3E4 : Name = default
        Attribute list:
          024CAA00 0 00000001 session-id(336) 4 34991(88AF)
          024CAA14 0 00000001 start_time(342) 4 Jan 23 2012 16:22:18
          024CAA28 0 00000009 audit-session-id(599) 24 0AC5010200001C49A5C6990F
      No data for type IPSEC-TUNNEL
      No data for type RESOURCE
      No data for type 11
      No data for type 12
      No data for type CALL
      No data for type VPDN-TUNNEL
      No data for type VPDN-TUNNEL-LINK
    Debg: No data available
    Radi: 2032F58
    Interface:
      TTY Num = -1
      Stop Received = 0
      Byte/Packet Counts till Call Start:
        Start Bytes In = 993533200     Start Bytes Out = 3867849339
        Start Paks  In = 23586534      Start Paks  Out = 28511761
      Byte/Packet Counts till Service Up:
        Pre Bytes In = 993539419     Pre Bytes Out = 3867856344
        Pre Paks  In = 23586593      Pre Paks  Out = 28511812
      Cumulative Byte/Packet Counts :
        Bytes In = 1112561235    Bytes Out = 3160900227
        Paks  In = 69526526      Paks  Out = 75491430
      StartTime = 16:22:18 GMT+5 Jan 23 2012
      AuthenTime = 16:22:19 GMT+5 Jan 23 2012
      Component = DOT1X
    Authen: service=8021X type=EAP method=RADIUS
    Kerb: No data available
    Meth: No data available
    PreA: No data available
    General:
      Unique Id = 000088A0
      Session Id = 000088AF
      Attribute List:
        0244DB94 0 00000001 port-type(174) 4 Ethernet
        0244DBA8 0 00000009 interface(170) 16 FastEthernet0/48
        0244DBBC 0 00000009 dnis(50) 17 00-18-B9-F5-5B-30
        0244DBD0 0 00000009 clid(37) 17 48-5B-39-EA-26-7C
    PerU: No data available
    PS. Have no command "show authentication"

  • Purchase Order created from different client machine with same login ID

    Hi,
    Purchase Order created from different machine using same Login ID. How to trace IP address of that Machines.
    Thanks
    Hemanth

    Hi;
    Please review:
    Re: sql to get Machine IP
    Regard
    Helios

  • Bypass login and password in Sun Server

    We have a Sun Microsystem Server Sunfire V210 that we want to get to the OS.  It is requiring for us to enter a login and password, which we cannot find.  Any suggestions out there in bypassing the login and password or obtaining a bootable media to bypass?

    Hi,
    Try this document:
    What to Do If You Forgot the Root Password - System Administration Guide: Advanced Administration

  • Error same login (novell client and VO)

    We have some problem about as below:
    We use Windows XP SP2 and install the Novell Client on them. Log on to the Novell NetWare 6.5 SP6 server already and we would like to use Virtual Office (1.6.2) by using browser (IE6, IE7, Firefox). We can authenticate when browse to Virtual Office.. they look like smoothly but we could not authenticate when we click the file button (NetStorage). It will show the authenticate form Username and Password. We couldnt use the same login name for authenticating this form (same = login on novell client and login on VO>>file)BUT.. if we use another user for authenticate the NetStorage on Virtual Office by using browser.IT CANWHY?????
    What happen about our Virtual Office or NetStorage on NW6.5SP6?
    Please recommend us for solving this problem and thanks.

    Is it possible that you are using concurrent login limitations for your users? That could prevent you from using a web based login if you are already consume a workstation based login.

Maybe you are looking for

  • Error while selecting plant in SC

    I am getting an strange error : No authorization for plant I have checked in pposa_bbp the user has the plant assigned in " Extended attributes " in location the location is replicated in BBP_locmap, If I use any other location than default it gives

  • Display pdf files in IE8

    I'd like to make IE8 by default to open pdf files instead of in Acrobat 9 window. Why do my pdf files open in Acrobat 9 window, even though i checked Display pdf in web browser? (it makes no difference if checked or unchecked anyway) thnx

  • Horizontal Menu Bar Sub Menus Go Across and Not Down

    How do I make the submenus for my horizontal menu drop down instead of going across the page in IE? It works fine in every other browser.

  • Datepicker on custom popup page close the popup page when date is selected

    Hi I have created a custom popup page according to the "How-To": Build Custom Popup Pages in Oracle Application Express. http://www.oracle.com/technology/products/database/application_express/howtos/how_to_create_custom_popups.html I have changed one

  • I want to create a interaractive reporting in that i want to create 3 repor

    I want to create a interaractive reporting in that i want to create 3 reporrs...I created one interactive report,,after than can I use at-line selection again or else plz help me in thsi reg ..