Sun menagement center 3.0 help

OS: Solaris 9 9/04
when i start to install sun menagement center 3.0
the installation quits with this message !!
Sun Management Center requires complete installation of Solaris_JDK-1.4 or above.
Please follow the following steps before Sun Management Center installation.
1. Install supported JDK version.
2. set JAVA_HOME to directory where JDK is installed.
3. export JAVA_HOME
i downloaded and install the 1.5 jdk but when i type the command java -version the out put is !!!!! java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
I also set the JAVA_HOME but proble is same.
Any suggestions from anybady?
Regards
Asif

It's best to use SunMC 3.5 at this point if your just getting started. The SunMC 3.5 Install and Config guide is the best document on setting up the environment. It's available on docs.sun.com.
SunMC is born from the SyMON product offering from within Sun and has nothig to do with the Solaris Management Console.
Take Care,
Mike

Similar Messages

How to integrate Solaris x86 server on Sun Management Center ?

Hello people,
I want to integrate a Solaris x86 server on Sun Management Center platform.
If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
/opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
I supose that in this directory, SunMC will install sparc binary files
At this point, I can't follow the installation and abort it.
Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
Thanks

Hi
From the Unix prompt enter oemapp console(for v9.x). If you are using earlier versions it is oemapp console (for starting the console) and oemapp dbastudio(for starting dba studio)
For starting OMS enter: oemctrl start oms.
Hope this helps
sarath

3rd party MIBs in Sun Management Center

Hello:
I have just installed a Sun Mangement Center 3.5 environment.
Also configured some SNMP object, some as proxy monytoring and other just as SNMP ping.
Now I have to configure some SNMP objects for which I have SNMPv2 MIBS and I dont know how to do it.
The Installation manual talks about configuring a legacy agent as a subagent.......is that the way to go?
I,ve read the instructions but there are some things I can�t understand.
The SNMP object is configured to transmit to the SMC server and to 1162 port.
The MIB file is on the SMC server machine is called sylantro.my and just placed it in /opt/SUNWsymon/sylantro/ directory, should this file reside in another directory?
How should I fill the info in subagent-registry-d.x?
sa2 = {
     type     = legacy
     persist     = false
     snmpPort = "1162"
     errorAction = restart
     startCommand     = "/usr/lib/snmp/mibiisa -p %port"
     stopCommand     = "kill -9 %pid"
     pollInterval = 60
     pollHoldoff = 60
     oidTrees = 1.3.6.1.4.1
     snmpVersion = SNMPv2
     securityLevel = noauth
     securityName =public
Questions:
is the name sa2 in the example arbitrary? or is related to the MIB file?
startCommand which command should I use to start????? I only have a MIB file, or should I use mibiisa command? if so, where is the MIB file related to the subagent-registry-d.x file?
oidTrees is this data in the MIB file? I found some documents that expresed 1.3.6.1.4.1.3945 I found that 3945 in the MIB, but the previous numbers do not.
snmpVersion is SNMPv2 ok?
securityLevel is ok to place noauth here? when setup for SMC was done I typed something for seed and also the default public string
How sould this SNMP object be configured in SMC to be able to monitor that object?
Ok this is all, thanks for any help.
here is an extrac from the sylantro.my MIB file
-- FILENAME :: sylsnmpsrv.my
-- VERSION :: $Id$
-- MODULE :: N/A
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DESCRIPTION ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-- Defines the server MIB.
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-- Completed Engineer DESCRIPTION
-- ========= ======== ====================
-- Oct/08/99 jml Created
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SYLANTRO-SERVER-MIB1 DEFINITIONS ::= BEGIN
--IMPORTS
-- MODULE-IDENTITY, OBJECT-TYPE, Integer32
-- FROM SNMPv2-SMI
-- DisplayString
-- FROM SNMPv2-TC;
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32, Counter32
FROM SNMPv2-SMI
enterprises
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC;
sylantroSystems OBJECT IDENTIFIER ::= { enterprises 3945 }
sylSnmpMib OBJECT IDENTIFIER ::= { sylantroSystems 1 }
sylSnmpMibServers OBJECT IDENTIFIER ::= { sylSnmpMib 2 }
sylantroServerV1 MODULE-IDENTITY
LAST-UPDATED "9908170000Z"
ORGANIZATION "Sylantro Systems"

Hi cva01,
If you'd like to poll your device for all its data and see it all inside SunMC then you'd have to use the SDK that comes with SunMC and the "Module Builder" module to import the MIB (or do it by hand). If it's something you'll need to use a lot of my company can build Sylantro monitoring from that MIB for you.
If you only want traps that come from the device, we'll be releasing an Event Gateway module soon that allows a SunMC Agent to decode and log (and alarm on) SNMP traps.
The subagent example you found shows how to have SunMC forward specific data acquisition requests through itself to another SNMP Agent. i.e. if there's another SNMP process on the same system as the SunMC Agent and you'd prefer to only have to poll a single process instead of two.
Regards,
[email protected]

How to integrate a Solaris x86 server on Sun Management Center ?

Hello people,
I want to integrate a Solaris x86 server on Sun Management Center platform.
If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
/opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
I supose that in this directory, SunMC will install sparc binary files
At this point, I can't follow the installation and abort it.
Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
Thanks

Hi Hisham,
hishooooo wrote:
Dear Gents,
I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
could you guide please?If you still have a copy of your SunMC media around, the same ["es-inst"|http://docs.sun.com/app/docs/doc/820-2215/command-line-1?l=en&a=view] program you use to install Solaris Agents should work on Linux as well. It autodetects OS type and will install Solaris packages or RPMs as appropriate.
Regards,
[email protected]
http://www.HalcyonInc.com

Sun Management Center and Reduced Core Installs

hey all,
I just discovered the Sun Management Center and the tool looks great for the servers I need to manage. However due to security reasons all our servers are installed as Reduced Network Core installs where we then add the minimal extra packages.
At the moment I am still testing everything but I am a bit stuck here and I believe that I might be missing some packages. I can get the server to find the agent but there I cannot load any of the modules. Sniffing the traffic does seem to show that the info is sent ( a list of names I recognise as module names) but the console does not show anything and reports an error unable to load module info.
Is there a full package list that is required to run the management center server and client? The agent runs fine on my desktop but that is a full install.
I already noticed the command ping is required, but am unsure about snmp daemons. What other packages will i need to install? The manual doesn't really give any information on that and seems to start from a full install

Never mind,
The problem was in the firewall who was defragmenting packets. Once I disabled that feature the server worked fine.
Seems just ping is enough to get the installer working.

Sun Download Center Maintenance

The Sun Download Center will be unavailable Wednesday, July 21, from 4:00 � 6:30 PM (PDT) due to scheduled maintenance. Downloading releases and updates of Sun Java Studio products will not be possible during this time.

The update center for Java Studio Creator continues to fail... the error in the IDE log is:
java.io.IOException: Server returned HTTP response code: 500 for URL: http://www
a.sun.com/services/qmds/query/metaCreator/catalog.xml?idev=4.26.1&auv=&lc=en&ibr
=creator&osname=Linux&osarch=i386&osversion=2.4.20-31.9smp&sn=<SERIAL NUMBER REMOVED FOR SECURITY REASONS>
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnecti
on.java:791)
at org.apache.xerces.impl.XMLEntityManager.setupCurrentEntity(Unknown Source)
at org.apache.xerces.impl.XMLVersionDetector.determineDocVersion(Unknown Sour
ce)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
[catch] at org.openide.xml.XMLUtil.parse(Unknown Source)
at org.netbeans.modules.autoupdate.XMLUpdates.parseDocument(Unknown Source)
at org.netbeans.modules.autoupdate.XMLUpdates.access$500(Unknown Source)
at org.netbeans.modules.autoupdate.XMLUpdates$2.run(Unknown Source)
at org.openide.util.Task.run(Unknown Source)
at org.openide.util.RequestProcessor$Task.run(Unknown Source)
at org.openide.util.RequestProcessor$Processor.run(Unknown Source)
Any ideas?

Welcome to this forum on "Core J2EE Patterns" by the Sun Java Center

Welcome to this forum on Core J2EE Patterns by the Sun Java Center!
CONTEXT:
This forum is intended for discussing the patterns from the Sun Java Center J2EE Pattern Catalog and other topics discussed in our book, Core J2EE Patterns.
We, the authors of the book, welcome you to this forum.
WHO WE ARE:
We are Enterprise Java Architects from the Sun Java Center (SJC), which is the Java consulting organization of Sun Microsystems. We are a world-wide group of architects focusing on all consulting related to Java technologies.
Visit our web-site for more information on SJC:
http://www.sun.com/service/sunps/jdc/index.html
BACKGROUND:
Over the last few years, we at SJC have worked with our customers in architecting, designing, and implementing solutions on the J2EE platform. We have worked on documenting the J2EE patterns for over two years and released the patterns for public review in Beta form via the Java Developer Connection in May, 2001.
The beta version of the patterns is available online as The Sun Java Center J2EE Pattern Catalog at:
http://developer.java.sun.com/developer/technicalArticles/J2EE/patterns/
Subsequent to the release, we received great feedback and comments from hundreds of reviewers. We then worked towards incorporating the feedback into the pattern documentation. One of the common comments was about the lack of code examples in the online documentation. The latest pattern documentation provides many code examples and incorporates all the feedback received so far.
BOOK INFORMATION:
Core J2EE Patterns, the book, was released at JavaOne 2001 during June 4-9, and will be available in stores around the end of June 2001.
The book includes the complete updated Sun Java Center J2EE Pattern Catalog with 15 patterns covering these J2EE technologies: Java Server Pages (JSP), Servlets, Enterprise JavaBeans (EJB), and Java Message Service (JMS). In addition to the J2EE Pattern Catalog, the book also provides other chapters that discuss design considerations,
bad practices, and J2EE Refactorings. Example code is included for all patterns and strategies.
If you wish to view the complete table of contents or order the book, please visit one of the following online bookstores:
Fatbrain.com: http://www1.fatbrain.com/asp/bookinfo/bookinfo.asp?theisbn=0130648841
Amazon.com: http://www.amazon.com/exec/obidos/ASIN/0130648841
COMMUNITY:
The online community for discussing the patterns included in our book Core J2EE Patterns has grown over the past year, since our first presentation at JavaOne 2000. This community is supported by our LISTSERV and is available for public participation at:
http://archives.java.sun.com/j2eepatterns-interest.html
You can view the past discussions on this list at the above URL.
FORUM LOGISTICS:
John and Dan are on the east coast and Deepak is on the west coast. We will be tuned into the forum and answering the messages periodically between June 19 and June 25, 2001. If you want to discuss the J2EE Patterns after June 25, you are invited to join the aforementioned J2EE Patterns Interest list.
FORUM DISCLAIMER:
All responses to questions posed in this News Group are given on an "as is" basis. We believe the solutions or explanations given here are correct, but do not guarantee that responses will be complete, without error and/or work for all platforms and system configurations.
The forum is now open! Let the discussion begin...
John Crupi - Chief Java Architect
Dan Malks - Enterprise Java Architect
Deepak Alur - Enterprise Java Architect
---Authors of Core J2EE Patterns

Rajakannan,
There are numerous ways to implement a templating mechanism in support of the composite view pattern, included in the catalog as a presentation-tier pattern.
The goal is to avoid simply having monolithic views with all the formatting code embedded directly withing the view. If we have common subviews that are shared across several or more views then we end up with a copy-and-paste type of reuse...undesirable. So, modularity is one issue. Another major force when considering the Composite View pattern is that we may want to manage the layout of our pages and the content of our pages separately. We may have some logical regions defined, such as a search panel and main body, and a subview that plugs into those logical regions that map to a physical page (ie: x.jsp and y.jsp). We may then want to vary one independent of the other...ie: we may want to modify the layout of the page w/o changing the content and we may want to vary the content w/o touching the layout.
There are a number of implementation strategies that can be used to implement the Composite View pattern, ranging from relatively simple to much more sophisticated. We describe each in our book and include source code examples.
The example in the book that allows for supporting all the issues described above is implemented using the "Custom Tag View Management Strategy" and uses a tag library written by David Geary, that supports the Composite View pattern. The library is also included in David's new book, Adv. JavaServer Pages, Prentice Hall, 2001.
Again, it's simply one implementation and, as you mention, there are many different ways to implement this strategy.
Thanks for your question,
Dan

HT4061 I am living in Pakistan, Lahore. I have purchased an Apple Iphone 5S online from apple store. I am facing water damage problem and there is no apple store here in Pakistan, How can I repair my phone from apple service center? Please help me

I am living in Pakistan, Lahore. I have purchased an Apple Iphone 5S online from apple store. I am facing water damage problem and there is no apple store here in Pakistan, How can I repair my phone from apple service center? Please help me

Take it to an authorized service center or Apple Store in the country where the phone originated. Apple does not sell iPhones in Pakistan, nor will they ship them to Pakistan.

Solstice enterprise agent and Sun Mgmt Center

Is anyone familiar with a way to convert a sub-agent developed with Solstice Enterprise Agent and APIs into a Sun Management Center sub-agent? I have a MIB as well as source code for the stubbed code generated by mibcodegen. ... Not sure if this is totally useless at this point and I have to start from scratch.

The MIB files are located under /var/snmp/mib , as for the OID i can't remember.. but if i remember i can check some old documents which i should have somewhere (unless someone else manages to answer first ;-)
As to the snmpwalk problem, ensure that you have the latest patches, i recall there being a snmpwalk <-> EA bug. It might have been in Solaris 9, but it might also have been in an earlier release.
Anyway, the latest Enterprise Agent patches are always good for security reasons.

Hello i have a problem with a game on game center can you help me?

hello i have a problem with a game on game center can you help me?

Perhaps, but you will need to provide a little more detail.

Sun Management Center - how to install the SMC agent on linux

Dear Gents,
I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
could you guide please?
appreciate your support and cooperation
Best Regards
Hisham

Hi Hisham,
hishooooo wrote:
Dear Gents,
I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
could you guide please?If you still have a copy of your SunMC media around, the same ["es-inst"|http://docs.sun.com/app/docs/doc/820-2215/command-line-1?l=en&a=view] program you use to install Solaris Agents should work on Linux as well. It autodetects OS type and will install Solaris packages or RPMs as appropriate.
Regards,
[email protected]
http://www.HalcyonInc.com

HT4759 Game Center games iCloud help

I have my games in Game Center but don't know how to download it from there and I have a new IPad so tried downloading through iCloud but can't seem to be able to get into it help please

Hey there Sanchezmoya!
I have a couple of articles here that may help you with this question. If you need to re-download the actual apps for the games you are wishing to play, you can find those in the past purchases of your Apple ID:
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
If you have a backup you can restore from (if you had an iPad previously), then you can see this article for information on how to restore from your previous backup and access your game saves:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Take care, and thanks for visiting the Apple Support Communities.
-Braden

JavaEditorKit sun.tools.java.Constants jar help

I found a good article on JavaEditorKit using JEditorPane.
Problem is this article uses sun.tools.java.Constants. I could not find a jar that would provide the functionality.
I was able to see api for sun.tools.java.Constants.
I need someone to help me in getting the approriate jar.
Thanks & Regards
Ajay Kalidindi

Hi,
I saw that too thinking it would be a good way to learn about a simple editor in Java.
I got it working only after upgrading the code to Java 2 (ie com.java to javax) and extracting out all of sun.tools.java package from tool.jar out of my jdk. It looked ok but I think this is way too old example to be using now days.
I think that the sun.tools.java package has been protected from developers use so it wouldn't help you
develope anything anyway, however http://www.jext.org uses a similiar idea to do its' syntax highlighting
it might worth checking out.
regards
David

Quality Center/Solman configuration help

Hi. We're having some issues with our Quality Center/SolMan integration. We had it set up and working, and now "something" changed but we're not sure what, and our QC guru quit a few weeks back
We seem to be having authorization issues, but we're not sure where the config issue is. We have a user trying to push data from the Solman instance to Quality Center - when we look in the QC App server log, we see this.
com.hp.erp.ei.service.sm.base.exceptions.AuthorizationException: User is not authorized to perform the action PushBlueprintAction
the user is an admin on the QC system, the ID that was initially configured in Solman to handle the transfer also 'seems' to have the correct permissions. Where do we need to start looking to solve this?
What other information can I provide to help this out?
Thanks!
Bernie.

Hi Bernie Krause
1. Please check this back group communication user is not get deleted:
SAP_QC_INTERFACE Authorization for background communication user
2. check this also:
SAP Quality Center by HP
See IMG activity: Information and
SAP_QC_BY_HP_ADMIN Full authorization to configure, send and receive
data to/from Quality Center; needs to be assigned
additionally with respective role for Implementation
3 Did you check the Security guide under the communication channel
Solution Manager to Quality Center by HP uses following protocol SOAP
For more accurate details go to : https://websmp207.sap-ag.de/securityguide
you should be fine...
Regards,
Santosh Asuthkar

Eclipse: Ant: sun-appserv-deploy, not working, help please.

Hello,
Trying to use Eclipse: Ant to deploy using the build.xml to localhost. I have the following target in my Ant build.xml file, but it's not picking up the <sun-appserv-deploy> tag.
I have the following file is the Ant classpath:
C:\Sun\studio5u1_se\appserver7\lib\ant\lib\jakarta-ant-1.4.1-optional.jar.
I'm not asking for Eclipse configuration or Ant help, but what .jar file(s) do I need and where do they have to be for Ant to recognize the <sun-appserv-deploy> tag?

The sun-appserv-deploy tasks are defined in the sun-appserv-ant.jar (which I think is in C:\Sun\studio5u1_se\appserver7\lib on your machine).
Check the ant documentation for instructions on integrating tasks into your environment.
vbk

Sun menagement center 3.0 help

Similar Messages

Maybe you are looking for