Sun ONE Web Server 6.0 AND jre 1.6
I am using Sun ONE Web Server 6.0 Service Pack 11. Can I upgrade my JRE version to 1.6? Currently I am using 1.5. Your response will be much appreciated?
I am using external JRE. I have already installed it.
When I type java -version on /usr/iplanet/servers/bin/https/jre/bin, I am getting Java(TM) SE Runtime Environment (build 1.6.0_16-b01). My question is, will it cause any issues when I run my application? Has sun specified like JRE 1.6 should be used on Sun ONE Web Server 6.1 onwards only?
Similar Messages
-
Sun ONE Web Server 6.1SP5 and Communications Express Error
I post this to the wrong forum i think i am getting this error after running the config-uwc.
Sun ONE Web Server 6.1SP5 B06/23/2005 22:22
info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.5.0_04] from [Sun Microsystems Inc.]
config: for host 0.0.0.0 trying to GET /, name-trans-passthrough reports: init-passthrough has not been called
info: WEB0100: Loading web module in virtual server [https-proxy1.mrc.ac.za] at [da]
info: WEB0100: Loading web module in virtual server [https-proxy1.mrc.ac.za] at [uwc]
info: WEB0110: Ignoring invalid property [allowLinking] = [true]
info: WEB0100: Loading web module in virtual server [https-proxy1.mrc.ac.za] at [search]
warning: CORE3283: stderr: Exception in thread "Thread-1" java.lang.NoClassDefFoundError: org/mozilla/jss/crypto/KeyGenAlgorithm
warning: CORE3283: stderr: at java.lang.Class.forName0(Native Method)
warning: CORE3283: stderr: at java.lang.Class.forName(Class.java:164)
warning: CORE3283: stderr: at com.iplanet.services.util.Crypt.createInstance(Crypt.java:133)
warning: CORE3283: stderr: at com.iplanet.services.util.Crypt.<clinit>(Crypt.java:103)
warning: CORE3283: stderr: at com.iplanet.services.ldap.LDAPUser.getPasswd(LDAPUser.java:117)
warning: CORE3283: stderr: at com.iplanet.services.ldap.ServerInstance.getPasswd(ServerInstance.java:128)
warning: CORE3283: stderr: at com.sun.identity.security.ServerInstanceAction.run(ServerInstanceAction.java:92)
warning: CORE3283: stderr: at java.security.AccessController.doPrivileged(Native Method)
warning: CORE3283: stderr: at com.iplanet.am.util.AdminUtils.<clinit>(AdminUtils.java:82)
warning: CORE3283: stderr: at com.sun.identity.security.AdminDNAction.run(AdminDNAction.java:86)
warning: CORE3283: stderr: at java.security.AccessController.doPrivileged(Native Method)
warning: CORE3283: stderr: at com.sun.identity.authentication.internal.server.SMSAuthModule.initialize(SMSAuthModule.java:129)
warning: CORE3283: stderr: at com.sun.identity.authentication.internal.LoginContext.login(LoginContext.java:122)
warning: CORE3283: stderr: at com.sun.identity.authentication.internal.AuthLoginThread.run(AuthLoginThread.java:82)I reran the access manager configuration and deployed it to the web server and now the webserver starts up successfully. I think my problem was that the file I was using initially wasn't properly setup for my enviroment.
Carinus -
Sun ONE Web Server 6.1 and Beans
Hello,
I am learning JSP and I have a new install of Sun ONE Web Server Enterprise Edition 6.1. I have a some java code (a class) I would like to use in my JSP page via <jsp:useBean...>.
Where do I put my .java (or compiled .class) file?
For example: UserData.class
Thanks,
MichaelThanks for the reply.
Under my <appdir> I created a WEB-INF and classes directries. I copied my .class file to it but still get the message in the Sun One 6.1 error log:
C:\Sun\WebServer6.1\https-titan\ClassCache\https-titan\default-webapp\_jsps\_apps\_bean1\_SaveName_jsp.java:66: package user does not exist
user = (user.UserData) java.beans.Beans.instantiate(this.getClass().getClassLoader(), "user.UserData");
^
I am so new - what else can you recommend?
Thanks again,
Michael -
Sun ONE Web Server 6.1 and p6spy integration
Has anyone successfully integrated p6spy with Sun ONE Web Server on a Windows platform? If so, any help would be greatly appreciated.
Y follow your steps (they seem correct for me too) and I get:
warning: CORE3283: stderr: Warning: Could not set property setStringmatcher due
to InvoicationTargetException
warning: CORE3283: stderr: Warning: Error registering factory [com.p6spy.engine
.logging.P6LogFactory]
warning: CORE3283: stderr: Caused By: java.lang.ClassCastException
warning: CORE3283: stderr: com.p6spy.engine.spy.P6DriverNotFoundError: Error reg
istering factory [com.p6spy.engine.logging.P6LogFactory]
warning: CORE3283: stderr: Caused By: java.lang.ClassCastException
warning: CORE3283: stderr: at com.p6spy.engine.spy.P6SpyDriverCore.initMeth
od(P6SpyDriverCore.java:289)
warning: CORE3283: stderr: at com.p6spy.engine.spy.P6SpyDriver.initMethod(P
6SpyDriver.java:78)
warning: CORE3283: stderr: at com.p6spy.engine.spy.P6SpyDriver.<clinit>(P6S
pyDriver.java:74)
warning: CORE3283: stderr: at java.lang.Class.forName0(Native Method) -
Hi, all
I would like to ask what are the differences between Sun ONE Web Server 6.1 and apache 2 on the features/functions matter.
Compare with apache, what things do the SUN ONE Web can done.?
What things do the SUN ONE Web Server cannot done?
I just want to compare their functions/features.
Thank you for your help.I don't know of a comprehensive comparison between the two, and I don't know enough about Apache Httpd to give a fair comparison. However, here are some highlights.
- Functionality: Besides from a few things that can be done with Apache Httpd and mod_rewrite but cannot be done in WS6.1, almost everything else worth doing can be done with WS6.1.
- Performance and stability: WS6.1 has the advantage here. Look at the latest SPECWeb2005 results submitted by sun (http://www.spec.org/web2005/results/web2005.html).
If you have specific features/functions that you want to list, we can offer better comparisons. -
IPlanet migration failure for Sun One Web server 6.1SP6
Recently we downloaded the Sun One Web server 6.1SP6 and we are having problem trying to upgrade our current version. We have been able to install the package and get the admin console running but we can not migrate the current instances across to the new version. We can successfully choose an instance to migrate however once we click the migrate button, absolutely nothing happens in the browser and nothing can be seen in any error logs and truss indicates a read of a pipe going nowhere, after which the cgi stub terminates.
We are migrating from
iPlanet-WebServer-Enterprise/6.0SP5 B10/31/2002 16:22
to
CORE1116: Sun ONE Web Server 6.1SP6 B05/07/2006 12:33well, it is good that you have considered to upgrade considering 6.0 Sp5 has been EOL'ed for some time now.
here is the url that describes migrating to 6.1 from 6.0
http://docs.sfbay/app/docs/doc/819-6514/6n8h9dr61?a=view
now, if you are still having issues with migration using GUI, you can provide us the admin server error logs or call Sun tech support (if you have support contract) to help you with this. -
Sun One Web Server 6.1 Eclipse Plugin?
I have Eclipse 3.1 with WST tools and Visual Editor plug-in installed. I am a
noob to this IDE and web solution. I want ot use Sun One Web Server for my web
application testing and implementation. I want my Dynamic Web Application
projects to build and use the Sun One Web Server I have installed and running on
my machine. The only server options I see are some Generic WebLogic servers and
JBOSS or Tomcat/Jakarta servers. How do I get the Sun One Web Server to show up
as an option when building a web application in Eclipse using WST?I am look for the same like you did quite ago but I need free Eclipse Plugin for Sun One Web Server 7/8 and let me have ref if you could.
-
NetBeans and Sun ONE Web Server 6.1
I have a JSP / Beans / Servlet Web application working in Tomcat on my local machine, a Macintosh laptop. I used NetBeans to create it all, and everything works fine there. I have tried to upload everything to another computer (Solaris based) which is running Sun ONE Web Server 6.1, but am having problems.
I uploaded the WAR file that NetBeans created, and uploaded the 'web' directory that NetBeans created. I can access HTML files from that web folder, but when I ask it to go to the first page, index.jsp, it has a problem with the beans. In my JSP file I do:
<jsp:useBean id="db" class="drc.database" scope="session" />
It seems to be having problems loading that class. What do I need to do? Here is the error code:
[04/Aug/2005:17:15:36] fine (15708): for host 129.147.40.215 trying to GET /index.jsp, ntrans-j2ee reports: mapped uri "/index.jsp" in context "" to resource "jsp"
[04/Aug/2005:17:15:36] fine (15708): for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: context = StandardEngine[null].StandardHost[drc].StandardContext[]
[04/Aug/2005:17:15:36] fine (15708): for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: contextPath =
[04/Aug/2005:17:15:36] fine (15708): for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: wrapper = StandardEngine[null].StandardHost[drc].StandardContext[].StandardWrapper[jsp]
[04/Aug/2005:17:15:36] fine (15708): for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: servletPath = /index.jsp
[04/Aug/2005:17:15:36] fine (15708): for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: pathInfo = null
[04/Aug/2005:17:15:36] info (15708): for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: WEB2798: [] ServletContext.log(): JspEngine --> /index.jsp
[04/Aug/2005:17:15:36] info (15708): for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: WEB2798: [] ServletContext.log(): ServletPath: /index.jsp
[04/Aug/2005:17:15:36] info (15708): for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: WEB2798: [] ServletContext.log(): PathInfo: null
[04/Aug/2005:17:15:36] fine (15708): for host 0.0.0.0 trying to GET /index.jsp, ntrans-j2ee reports: mapped uri "/index.jsp" in context "" to resource "jsp"
[04/Aug/2005:17:15:36] info (15708): for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: WEB2798: [] ServletContext.log(): RealPath: /www/html/drc/index.jsp
[04/Aug/2005:17:15:36] info (15708): for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: WEB2798: [] ServletContext.log(): RequestURI: /index.jsp
[04/Aug/2005:17:15:36] info (15708): for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: WEB2798: [] ServletContext.log(): QueryString: null
[04/Aug/2005:17:15:36] failure (15708): for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: StandardWrapperValve[jsp]: WEB2792: Servlet.service() for servlet jsp threw exception
org.apache.jasper.JasperException: WEB4000: Unable to compile class for JSPWEB4124:
An error occurred at line: 3 in the JSP file: /index.jsp
WEB4126: Generated servlet error:
/opt/SUNWwbsvr/https-kesin.Central.Sun.COM/ClassCache/drc/default-webapp/_jsps/_index_jsp.java:66: package drc does not exist
drc.database db = null;
^
WEB4124:
An error occurred at line: 3 in the JSP file: /index.jsp
WEB4126: Generated servlet error:
/opt/SUNWwbsvr/https-kesin.Central.Sun.COM/ClassCache/drc/default-webapp/_jsps/_index_jsp.java:69: package drc does not exist
db= (drc.database)
^
WEB4124:
An error occurred at line: 3 in the JSP file: /index.jsp
WEB4126: Generated servlet error:
/opt/SUNWwbsvr/https-kesin.Central.Sun.COM/ClassCache/drc/default-webapp/_jsps/_index_jsp.java:74: package drc does not exist
db = (drc.database) java.beans.Beans.instantiate(this.getClass().getClassLoader(), "drc.database");
^
3 errors
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:312)
at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.loadJSP(JspServlet.java:764)
at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.access$000(JspServlet.java:624)
at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:412)
at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:363)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:578)it is certifying / authenticating that the secured
web site is owned by the genune party and the
transactions with the party is doing through a
encrypted format.
Am i correct up to this???Correct, that is what SSL/certificates are for.
>
Then my dowt is that
Is it possible to make my server SSL enabled with
h out using any certificate ????( the documents you
are given is telling about certificates)No it is not possible - the whole idea behind SSL communication is that it is based on TRUSTED secure communication. If a client can not check validity of server's certificate it is not trusted any more.
It might not seem to be the case when you create a self-signed certificate, but it really is so. In case of a self signed certificate you(i.e your browser) trust yourself with whatever you do with your application on your webserver.
After all can I install some certificates lateron ??
If you really need SSL with your webserver you have to either create a self signed certificate, see this: http://sial.org/howto/openssl/self-signed/
or request a test certificate from www.verisign.com or www.thawtee.com -
Disable PUT and DELETE HTTP methods in Sun ONE Web Server 6.1
Hello ,
i want disable PUT and DELETE methods in SunOne 6.1 , i don't find the solution ...
Thnaks to help me .
telnet www.mywebsite.com 80
Trying 145.248.193.13...
Connected to www.mywebsite.com.
Escape character is '^]'.
OPTIONS * HTTP/1.0
HTTP/1.1 200 OK
Server: Sun-ONE-Web-Server/6.1
Date: Wed, 18 Jan 2006 08:07:41 GMT
Content-length: 0
Allow: HEAD, GET, PUT, POST, DELETE, TRACE, OPTIONS, MOVE, INDEX, MKDIR, RMDIR
Connection: closeare you sure that it isn't a vulnerability ? if i understand you , OPTIONS * HTTP/1.0 list all the possible methods but they are not actived ?
i have test with OPTIONS / HTTP/1.0 , is that the those possible methods : HEAD , GET ??
thanks
telnet www.mywebsite.com 80
Trying 145.248.193.13...
Connected to www.mywebsite.com.
Escape character is '^]'.
OPTIONS / HTTP/1.0
HTTP/1.1 200 OK
Server: Sun-ONE-Web-Server/6.1
Date: Wed, 18 Jan 2006 11:11:07 GMT
Content-length: 0
Allow: HEAD, GET
Connection: close -
Help for Installing PHP and Sun One Web Server
Hi
I tried to install PHP 5.1.4 and Sun One Web Server 6.1. I am not able to complete this and got stuck. All the available materials in net seems to flow above my head.
It will be very helpful if someone could let me know the step by step configuration a bit brief for the same.
Thanks in advance
Kathirvel BalakrishnanHi Craig
I am following these steps,
1st step : Installing PHP on the WindowsNT server (NT users only)
Copy the php files on your server
Get the php zip file
Copy the php files under a directory (for example : d:php4)
(be careful don't use c:Program Filesphp because of the space between Program and Files
copy php4ts.dll to c:winnt and msvcrt.dll if you don't already have it on your system
Edit php.ini-dist
rename php.ini-dist to php.ini
Edit php.ini : Indicate in which directory you have copied youre php files. (extension_dir = d:php4extensions ; directory in which the loadable extensions (modules) reside.)
copy php.ini in winnt directory (php.ini is parsed in my config)
Matthias Kramer told me that he had to move php.ini to <path-to-netscape-server>/https-servername/config for it to be parsed
Make a file association under Windows NT
In a DOS Window, type assoc .php=PHPScript
ftype PHPScript=d:php4php.exe %1 %*
Test the 1st step
Create a C:test.php file with a single line like <? echo("Nothing to write"); ?>
Create a C:test.bat file with 2 lines test.php
pause
double-clic on test.bat
If you see something like X-Powered-By: PHP/4.0.3
Content-type: text/html
Nothing to write
then the NT association works!!
2nd step : Configuring Netscape Enterprise Server or iPlanet for PHP4 with nsapi (NT & UNIX)
Unix users only
Compile PHP as follows: ./configure --with-nsapi=/usr/local/netscape/server4 --enable-libgcc
make
make install
Add LD_LIBRARY_PATH=<libdir> to your Netscape server startup script
where <libdir> is the full path to the directory where libstdc++.so.2.10.0 is located (usually /usr/local/lib)
Add a mime-type to the Netscape Server
In the Netscape Administration console chose Preferences|Mime Types
Add a new type called magnus-internal/x-httpd-php for exts=php
Click here for screenshot
Stop your Web Server
Make a copy of obj.conf located in: <path-to-netscape-server>/https-servername/config
Modify obj.conf
There are several section in obj.conf
At the end of the Init section of obj.conf (necessarely after mime type init),
place this two lines For NT users
Init fn="load-modules" funcs="php4_init,php4_close,php4_execute,php4_auth_trans" shlib="d:/php4/sapi/php4nsapi.dll"
Init fn="php4_init" errorString="Failed to initialise PHP!"
For Unix users
Init fn="load-modules" funcs="php4_init,php4_close,php4_execute,php4_auth_trans" shlib="/usr/local/netscape/server4/bin/libphp4.so"
Init fn="php4_init" errorString="Failed to initialise PHP!"
In The < Object name="default" > section,
place this line (necessarely after all 'ObjectType' and before all 'AddLog' lines) Service fn="php4_execute" type="magnus-internal/x-httpd-php"
Add a new object called x-httpd-php <Object name="x-httpd-php">
ObjectType fn="force-type" type="magnus-internal/x-httpd-php"
Service fn=php4_execute
</Object>
Restart your Web Server
Test the 2nd step
Put the test.php file in the document root of your server
Then type http://server/test.php
If you can see "nothing to write" in your browser then it works!
AS mentioned in step 1,
I am not getting the PHP message.
I am installing it in my laptop, it has no IP, is that has to do something with this.
Please guide me from here.
Thanks in advance
Kathirvel -
Error message upgrading Sun One Web Server
We currently use Sun One Web Server SP 4. I have a RSA Cleartrust Agent to install that specifies SP 5. I downloaded SP 7. When I try to install it I receive the following message - "A previous release of the Web Server has been detected in the server root. Please select a different server root." I tried stoppping all the services, then installing, same result. The documentation says to run the install, it would detect the previous version and install. Do I have to uninstall the previous version? I do not want to do that. Thanks in advance.
Jimadmin.inf
[General]
Name=Administration Services
Components=admin,admin-client
Checked=TRUE
Description=Server Administration Services used by system administrators to manage all iPlanet Servers.
[admin]
DefaultAcceptLanguage=en
Vendor=Sun | Netscape Alliance
Name=iPlanet Administration Server
NickName=admin
Description=Provides services to other server products.
Dependencies=base/5.1
Version=5.1
Revision=
Compatible=4.0
Security=domestic
BuildNumber=2002.158.2342
Registration=FALSE
Checked=TRUE
IsAdmin=TRUE
UseLDAP=TRUE
BackupFiles=/admin-serv/config/adm.conf
Mandatory=FALSE
#install files for admin
System32Archive=
Archive=admin.z
#plugin dll section
PlugIn=insadm.dll
ReadInf=ADM_ReadComponentInf
PreInstall=ADM_PreInstall
AskOptions=ADM_AskOptions
GetSummary=ADM_GetSummary
WriteGlobalCache=ADM_WriteGlobalCache
WriteLocalCache=ADM_WriteLocalCache
ReadGlobalCache=ADM_ReadGlobalCache
ReadLocalCache=ADM_ReadLocalCache
PostInstall=ADM_PostInstall
PostUnInstall=ADM_PostUnInstall
PreUnInstall=ADM_PreUnInstall
[admin-client]
Dependencies=base-client/5.1
Name=Management Console
Description=Used by system administrators to manage other server products.
Version=5.1
Compatible=4.0
BuildNumber=2002.158.2342
IsMCC=TRUE
Checked=TRUE
Mandatory=FALSE
Security=domestic
#install files admin-client component
Archive=console.z
#plugin dll section
PlugIn=insadm.dll
PreInstall=CON_PreInstall
PostInstall=CON_PostInstall
PostUnInstall=CON_PostUnInstall
PreUnInstall=CON_PreUnInstall
WebServer.inf
[General]
Name=iPlanet Web Server, Enterprise Edition
Plugin=WebServer\WebServer.dll
Description=iPlanet Web Server, Enterprise Edition
Checked=True
Components=NESCore,JRE,Java,Search,SNMP,I18N,CleanUp
[NESCore]
Vendor=Sun Netscape Alliance
Name=Server Core
Description=iPlanet Web Server Core
Nickname=nescore
Version=6.0
BuildNumber=2
Compatible=4.0
Dependencies=svrcore/4.2
DefaultAcceptLanguage=en
Expires=0
Registration=FALSE
Security=domestic
Checked=TRUE
Mandatory=TRUE
IsAdmin=FALSE
UseLdap=FALSE
SourcePath=WebServer
Archive=nescore.zip
System32Archive=nescore32.zip
Plugin=WebServer\WebServer.dll
PreInstall=SvrCore_PreInstall
AskOptions=SvrCore_AskOptions
WriteGlobalCache=SvrCore_ReadGlobalCache
ReadGlobalCache=SvrCore_ReadGlobalCache
ReadLocalCache=SvrCore_ReadLocalCache
WriteLocalCache=SvrCore_WriteLocalCache
GetSummary=SvrCore_GetSummary
PostInstall=SvrCore_PostInstall
PostUnInstall=SvrCore_PostUninstall
[JRE]
Name=Java Runtime Environment
Description=Java Runtime Environment
Nickname=JRE
Version=1.1
BuildNumber=2
Compatible=1.1
Expires=0
Registration=FALSE
Security=domestic
Checked=TRUE
Mandatory=True
SourcePath=WebServer
Archive=jre.zip
PlugIn=WebServer\WebServer.dll
PreInstall=JVM_PreInstall
AskOptions=JVM_AskOptions
GetSummary=JVM_GetSummary
PostInstall=JVM_PostInstall
[Java]
Name=Java and Servlets
Description=iPlanet Web Server Java and Servlets Support
Nickname=java
Version=6.0
BuildNumber=2
Compatible=4.0
Expires=0
Registration=FALSE
Security=domestic
Checked=TRUE
Mandatory=True
SourcePath=WebServer
Archive=java.zip
PlugIn=WebServer\WebServer.dll
PreInstall=Java_PreInstall
GetSummary=Java_GetSummary
WriteLocalCache=Java_WriteLocalCache
ReadLocalCache=Java_ReadLocalCache
PostInstall=Java_PostInstall
[Search]
Name=Search and Indexing
Description=iPlanet Web Server Search and Indexing Support
Nickname=search
Version=6.0
BuildNumber=1
Compatible=4.0
Expires=0
Registration=False
Security=domestic
Checked=True
Mandatory=False
SourcePath=WebServer
Archive=search.zip,searchdata.zip
PlugIn=WebServer\WebServer.dll
PreInstall=WebPub_PreInstall
WriteLocalCache=WebPub_WriteLocalCache
PostInstall=WebPub_PostInstall
[SNMP]
Name=SNMP
Description=iPlanet Web Server SNMP Support
Nickname=snmp
Version=6.0
BuildNumber=1
Compatible=4.0
Expires=0
Registration=False
Security=domestic
Checked=True
Mandatory=False
SourcePath=WebServer
Archive=snmp.zip
PlugIn=WebServer\WebServer.dll
PreInstall=SNMP_PreInstall
PostInstall=SNMP_PostInstall
[I18N]
Nickname=i18n
Name=I18N Support
Version=6.0
Compatible=4.0
Expires=0
Checked=True
Mandatory=True
Visible=False
SourcePath=WebServer
Archive=i18n-core.zip
UseLDAP=False
Description=iPlanet Web Server Internationalization Support
Registration=FALSE
Plugin=WebServer\WebServer.dll
PreInstall=I18N_PreInstall
AskOptions=I18N_AskOptions
WriteLocalCache=I18N_WriteLocalCache
GetSummary=I18N_GetSummary
PostInstall=I18N_PostInstall
defLang=en,ja
en=�p��
ja=���{��
[CleanUp]
Name=Upgrade Files
Description=iPlanet Web Server Upgrade Files
Nickname=cleanup
Version=6.0
Compatible=4.0
Expires=0
Registration=False
Security=domestic
Checked=True
Mandatory=True
Visible=False
SourcePath=WebServer
Archive=nescore.zip
PlugIn=WebServer\WebServer.dll
PreInstall=Cleanup_PreInstall
AskOptions=Cleanup_AskOptions
GetSummary=Cleanup_GetSummary
WriteLocalCache=Cleanup_WriteLocalCache
PostInstall=Cleanup_PostInstall -
We have a web page with 2 frame set (fa, and fb)
fb has a table with a cell containing div of another table xx.
We face the case where the result in the table xx is not completely displayed due to server crash.
Each time this page is serviced the server crash with the following exception in server was shown from the errors log:
Server crash detected (signal SIGBUS)
Crash occurred in function JVM_FillInStackTrace from module /usr/j2se/jre/lib/sparc/client/libjvm.so
Occasionally the server crash with the following exception:
Server crash detected (signal SIGSEGV)
Crash occurred in function JVM_NewArray from module /usr/j2se/jre/lib/sparc/client/libjvm.so
We were not able to simulate this problem in another instance in �dev� box.
We were also not able to simulate this problem in another instance in same �final� box.
The following was googled for JVM_NewArray :
bug id : 4839641 <http://developer.java.sun.com/developer/bugParade/bugs/4839641.html>
bug id : 4720694 <http://developer.java.sun.com/developer/bugParade/bugs/4720694.html>
The web service is in �final� box using the following:
- Sun one web server 6.0 sp9.
-SunFire 880
-OS: Solaris 9
- Using the Java HotSpot(TM) Client VM v1.4.1_01a from Sun Microsystems Inc.
-JSP
-Java
Would this problem we are facing be a sunone server issue or JVM issue?
Or would there be other issues?It sure sounds like a JVM bug. I think you should try
using either a) the JVM shipped with Web Server 6.0
SPx (as this is the JVM version that's received the
most testing with Web Server 6.0 SPx) or b) the
latest 1.4-series JVM (as this will include bug fixes
made since 1.4.1_01a).Thanks for the prompt reply.
Would have to upgrade the JVM then.
Will get back again if the upgrade of the JVM solves this issue. -
Sun one web server 6.0 sp9. Crash occurred in function JVM_NewArray
We have a web page with 2 frame set (fa, and fb)
fb has a table with a cell containing div of another table xx.
We face the case where the result in the table xx is not completely displayed due to server crash.
Each time this page is serviced the server crash with the following exception in server was shown from the errors log:
Server crash detected (signal SIGBUS)
Crash occurred in function JVM_FillInStackTrace from module /usr/j2se/jre/lib/sparc/client/libjvm.so
Occasionally the server crash with the following exception:
Server crash detected (signal SIGSEGV)
Crash occurred in function JVM_NewArray from module /usr/j2se/jre/lib/sparc/client/libjvm.so
We were not able to simulate this problem in another instance in �dev� box.
We were also not able to simulate this problem in another instance in same �final� box.
The following was googled for JVM_NewArray :
bug id : 4839641 <http://developer.java.sun.com/developer/bugParade/bugs/4839641.html>
bug id : 4720694 <http://developer.java.sun.com/developer/bugParade/bugs/4720694.html>
The web service is in �final� box using the following:
- Sun one web server 6.0 sp9.
-SunFire 880
-OS: Solaris 9
- Using the Java HotSpot(TM) Client VM v1.4.1_01a from Sun Microsystems Inc.
-JSP
-Java
Would this problem we are facing be a sunone server issue or JVM issue?
Or would there be other issues?It sure sounds like a JVM bug. I think you should try
using either a) the JVM shipped with Web Server 6.0
SPx (as this is the JVM version that's received the
most testing with Web Server 6.0 SPx) or b) the
latest 1.4-series JVM (as this will include bug fixes
made since 1.4.1_01a).Thanks for the prompt reply.
Would have to upgrade the JVM then.
Will get back again if the upgrade of the JVM solves this issue. -
Cant start Sun ONE Web Server 6.1SP10
Hi,
Running SP8 have no issues. But when I upgrade to SP10, my webserver wont start. Here are the details.
Sun ONE Web Server 6.1SP10 B09/04/2008 10:26
failure: CORE3170: Configuration initialization failed: Error running init function load-modules: dlopen of /opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so failed (A file or directory in the path name does not exist.)
Launching browser....
The file mention is even there.
# ls -lt /opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so
-rwxr-xr-x 1 root system 306414 Jun 14 2007 /opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so
Appreciate all your inputs. Thanks.I just now installed Web Server 6.1 sp10 on AIX 5.2 machine works fine both with JDK 1.5 and 1.6 :
First I ran with JDK 1.5 (version shown below)
#java -version
java version "1.5.0"
Java(TM) 2 Runtime Environment, Standard Edition (build pap32dev-20080315 (SR7))
IBM J9 VM (build 2.3, J2RE 1.5.0 IBM J9 2.3
AIX ppc-32 j9vmap3223-20080315 (JIT enabled)
J9VM - 20080314_17962_bHdSMr
JIT - 20080130_0718ifx2_r8
GC - 200802_08)
JCL - 20080314and then changed in https-<instance>/config/server.xml, "javahome" to point to JDK 1.6 :
<JAVA javahome="/comps/jdk/16/aix/" serverclasspath=...>The exact version of JDK 6 I used is shown below :
#/comps/jdk/16/aix/jre/bin/java -version
java version "1.6.0"
Java(TM) SE Runtime Environment (build pap3260sr2-20080818_01(SR2))
IBM J9 VM (build 2.4, J2RE 1.6.0 IBM J9 2.4
AIX ppc-32 jvmap3260-20080816_22093 (JIT enabled, AOT enabled)
J9VM - 20080816_022093_bHdSMr
JIT - r9_20080721_1330ifx2
GC - 20080724_AA)
JCL - 20080808_02h4. oslevels
# oslevel -q;
Known Maintenance Levels
5.2.0.0
# oslevel -r
5200-02
# oslevel -r -q
Known Recommended Maintenance Levels
5200-10
5200-09
5200-08
5200-07
5200-06
5200-05
5200-04
5200-03
5200-02
5200-01
5200-00h4. How I built JDK
* Go to [http://www.ibm.com/developerworks/java/jdk/aix/service.html|http://www.ibm.com/developerworks/java/jdk/aix/service.html]
* Click on "Fix Info" link from Java 5.0 32 bit [http://www.ibm.com/developerworks/java/jdk/aix/j532/fixinfo.html|http://www.ibm.com/developerworks/java/jdk/aix/j532/fixinfo.html]
* Click on SR7 link [http://www-912.ibm.com/eserver/support/fixes/fixcentral/pseriespkgoptions/apar?fixes=IZ18002|http://www-912.ibm.com/eserver/support/fixes/fixcentral/pseriespkgoptions/apar?fixes=IZ18002] and download the JDK.
* You may have to create a soft links for sh (most probably only for Web Server 7 onwards)
# cd java-home
# ln -s bin sh
# cd jre
# ln -s bin sh* You may have to fix soft links in your JDK (especially links which point to /usr/java5/jre/bin) if your JDK is not installed on your local machine and you have copied that directory to another machine : for instance <JAVA-HOME>/bin/java should point to ../jre/bin/java rather than /usr/java5/jre/bin
* Due to [http://www.ibm.com/developerworks/forums/thread.jspa?threadID=179363&tstart=30|http://www.ibm.com/developerworks/forums/thread.jspa?threadID=179363&tstart=30], you may have to download security policies (jre/lib/security/US_export_policy.jar and jre/lib/security/local_policy.jar)
o Go to [http://www.ibm.com/developerworks/java/jdk/security/50/#sdkpol|http://www.ibm.com/developerworks/java/jdk/security/50/#sdkpol]
o Click on "IBM SDK Policy files" link i.e. [https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?source=jcesdk|https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?source=jcesdk]
o Downloaded "Unrestricted JCE Policy files for SDK 1.4" from that location (after login) [http://www6.software.ibm.com/.../unrestrict142.zip|http://www6.software.ibm.com/.../unrestrict142.zip]
o Unzip unrestrict142.zip file and replace the two jars (US_export_policy.jar and local_policy.jar) in appropriate places in JDK.
Same steps for JDK 6. -
Error while running Application on Sun One Web Server 6.1
Can some one please explain me how can I run application on sun one web server 6.1 ?
It is deployed .war file successfully. It only loads default.jsp and then fives following error:
1) Package netscape.ldap not found in import.
I imported this package to my java file.
Thanks,We need to deploy the application by next week end. any suggestions please
Maybe you are looking for
-
In Finder, you can right click a folder and open in new tab. Is there a way to open in new window?
-
Brazil Boleto Barcodes - Single Barcode for multiple vendor invoices
Hi All, I have the following two questions in Brazil Boleto process. 1) The vendor is giving a single boleto bar code for multiple invoices. However when we are entering the barcode in the Bank reference field, the last digits are getting changed as
-
How do i change the size of my movie?
hi i have adobe premiere pro cc and i created a new project, i want to make a movie for my friend. but it gives me a thin screen (to edit), as if i was filmilng on an iPhone, and i want it to be wide! how do i change it? i hope you understood what i
-
How to convert Oracle Data into Java Date
Hi there, in JDev 3.2 oracle.jbo.domain.Date was derived from oracle.sql.DATE, which has a timestampValue() method to get a java.sql.Timestamp. In Jdev 9.0.3 Date is not!! derived from oracle.sql.DATE, so my previous implementation fails. So, How can
-
Hello, This is something that is really driving me up the wall, if you create a table with say 12 columns and you want the first 4 to be say 100 pixels and rest to be 35. If you select the first 4 and set them too 100 pixels then select the rest and