Sun server - file not found warning message - send-file reports: HTTP4142
(File not found)
[25/Sep/2012:17:37:34] warning ( 9732): for host 127.0.0.1 trying to GET /vt/css/body_ie8.css, send-file reports: HTTP4142: can't find C:/Program Files/Sun/WebServer7/https-AC7440R877W6X.com/web-app/AC7440R877W6X.com/vt/css/body_ie8.css.
sun server is trying to find file body_ie8.css which is not exist. now i m testing application in ie8 so getting error like this. If i run same application in ie6 i will get body_ie6.css. if i create dummy files with these name i wont get any error message.
another sample error message
warning (14280): for host 127.0.0.1 trying to GET /vt/css/icefaces_ie.css, send-file reports: HTTP4142: can't find C:/Program Files/Sun/WebServer7/https-AC7440R877W6X.com/web-app/AC7440R877W6X.com/vt/css/icefaces_ie.css (File not found).
I m running JSF framework icefaces implememntation
Hi:
After some days and several test I discover the solution.
I'm using Unicodes in the messages text (like \u00e9, \u00e1) and due to a typing mistake, in just a word the sequence \u00es appears instead of \u00e9.
It seems \u00es is not a valid Unicode code and that was the cause of this particular error.
I think this kind of message error must change depending which web server is used.
As i said, i'm using the embedded oc4j server.
Bye.
Similar Messages
-
Deployment utility gives file not found warning, but build completes succesfully.
When running the deployment utility, I am able to analyze source files successfully; no problems there. When I go to build, all appears to go well until I click the popup that has the message: "The build is finished." After closing the popup, I get the following warning:
"Warning: This problem will cause an error when building a deployable image or an installer. The following file(s) were not found:"
It's followed by a list of dozens of files. However, I verified that all files are included in the search directories.
I installed the deployment as-is and it seems to run ok; it finds the files it's supposed to. However, I'm going to have a hard time selling this procedure off to QA if the deployment shows a 'file not found' message.
My question is: why do I get the 'file not found' warning during the deployment build process, yet the 'analyze source file' step finishes ok and the deployed files work ok?These files are all relative and are part of the workspace. I did find a
workaround to the problem.
In the search directories selection box, the top-level entry is "Current
sequence file" with subdir search enabled. The next entry is the workspace
directory with subdir search enabled; all files are in subdirs of the
workspace directory. The remaining entries are unchecked or not
user-defined (ie.: other NI directories on my computer). In order for the
deployment to work, I had to enable the third entry on the list: "Initial
directory" along with subdir enabled. However, the initial directory is
the same as the workspace directory (since I opened teststand by
double-clicking on my .tsw file). What I don't understand is why should it
matter that I have initial directory on the path if it's the same as the
entry before it? -
Help opening file - file not found error message
When I try to open an excel file that shows up in the finder, excel opens but then I get a "file not found" error message.
Any ideas what is going on?Hi Ceeblee,
SOLVED
How ?? This is a forum for sharing solving problems. So even you solved your own issue it would be helpful for others who read your topic to know how you solved. This could be helpful for future problems for other users.
Thanks ...
Dimaxum -
I keep getting this message when I try to view my coldfusion
page in my web browser. How do I fix this? I've tried saving it
somewhere else and recreating the file but I still get the message.
Here is the message:
The web site you are accessing has experienced an unexpected
error.
Please contact the website administrator.
The following information is meant for the website developer
for debugging purposes.
Error Occurred While Processing Request
File not found: /reviews.cfm
Resources:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1;
.NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30;
InfoPath.2; Windows-Media-Player/10.00.00.3990)
Remote Address 127.0.0.1
Referrer
Date/Time 06-Mar-08 12:31 PM
Stack Trace (click to expand)
coldfusion.runtime.TemplateNotFoundException: File not found:
/reviews.cfm
at coldfusion.filter.PathFilter.invoke(PathFilter.java:89)
at
coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:74)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:175)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at
coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at
coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:284)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Debugging Information ColdFusion Server Developer
8,0,0,176276
Template /reviews.cfm
Time Stamp 06-Mar-08 12:31 PM
Locale English (US)
User Agent Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1;
.NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30;
InfoPath.2; Windows-Media-Player/10.00.00.3990)
Remote IP 127.0.0.1
Host Name localhost
Execution Time
No top level page was found.
Exceptions
12:31:43.043 - coldfusion.runtime.TemplateNotFoundException -
in : line -1
File not found: /reviews.cfm
Scope Variables
CGI Variables:
AUTH_PASSWORD=
AUTH_TYPE=
AUTH_USER=
CERT_COOKIE=
CERT_FLAGS=
CERT_ISSUER=
CERT_KEYSIZE=
CERT_SECRETKEYSIZE=
CERT_SERIALNUMBER=
CERT_SERVER_ISSUER=
CERT_SERVER_SUBJECT=
CERT_SUBJECT=
CF_TEMPLATE_PATH=C:\ColdFusion8\wwwroot\reviews.cfm
CONTENT_LENGTH=
CONTENT_TYPE=
CONTEXT_PATH=
GATEWAY_INTERFACE=
HTTPS=
HTTPS_KEYSIZE=
HTTPS_SECRETKEYSIZE=
HTTPS_SERVER_ISSUER=
HTTPS_SERVER_SUBJECT=
HTTP_ACCEPT=*/*
HTTP_ACCEPT_ENCODING=gzip, deflate
HTTP_ACCEPT_LANGUAGE=en-us
HTTP_CONNECTION=Keep-Alive
HTTP_COOKIE=
HTTP_HOST=localhost:8500
HTTP_REFERER=
HTTP_USER_AGENT=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT
5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30;
InfoPath.2; Windows-Media-Player/10.00.00.3990)
PATH_INFO=
PATH_TRANSLATED=C:\ColdFusion8\wwwroot\reviews.cfm
QUERY_STRING=
REMOTE_ADDR=127.0.0.1
REMOTE_HOST=localhost
REMOTE_USER=
REQUEST_METHOD=GET
SCRIPT_NAME=/reviews.cfm
SERVER_NAME=localhost
SERVER_PORT=8500
SERVER_PORT_SECURE=0
SERVER_PROTOCOL=HTTP/1.1
SERVER_SOFTWARE=
WEB_SERVER_API=
Debug Rendering Time: 62 msNo CFINCLUDE, unless I'm not seeing it. Here's my code:
<!--- Get ratings --->
<cfquery datasource="PFB" name="Ratings">
SELECT *
FROM Ratings
ORDER BY RatingID
</cfquery>
<!----get ages----->
<cfquery datasource="PFB" name="Age">
SELECT *
FROM Age
ORDER BY AgeID
</cfquery>
<html>
<body>
<cfform action="insertnewreview.cfm">
<table>
<tr>
<td>Age:</td>
<td> <select name="AgeID">
<cfoutput query="age">
<option
value="#AgeID#">#Age#</option></cfoutput>
</select>
</td>
</tr>
<tr>
<td><cfoutput
query="question">#Question#</cfoutput></td>
<td><select name="RatingID">
<cfoutput query="ratings"><option
value="#RatingID#">#Rating#</option>
</cfoutput></select></td>
</tr>
</table>
</cfform>
</body>
</html> -
"File Not Found" on copy/paste files!
I had one big "real instrument" file that I decided to split into several smaller files. To do this, I would copy a section, paste it into a new file I had created, saved the new file, and then delete the original.
Now, when I try to open them, only a few will actually play. The others say "Audio File 'Recording#04.aif' not found,'" the Recording# varying with the tracks. It gives me the option to either "skip" or "search," the latter leading to a message that says the same thing, only this time with an exclamation point at the end. I then click "continue," which brings me to the file with a purple track section the same length as the music that used to be there, only now saying "file not found" and without any music on it.
Is there any way to retrieve these files?? It happens with 7 of the 10 files I did this with.I dont have the latest version of GB. I have whatever version is on a 2010 macbook pro.
That would be some version of GarageBand '11, but did you ever run Software update, to be sure to have the latest GarageBand '11 version compatible with your 2010 MacBook? You can check the version number of any Mac application from the "About" panel. In the main menu bar click the name of the application in the upper left corner of the screen and select the menu entry "About ...". This will show the version number.
GB doesnt crash....the files just seem to go missing.
How much free disk space do you have? Running out of disk space could explain what you are seeing.
Do you have the latest driver for your audio interface installed?
Check the manufacturer's page: http://tascam.com/product/us-144mkii/downloads/
I can find crash logs....but the tracks are useless....i cant edit them or anything.
Do you mean you found the audio files in the "Media" folder, when you open the package? Then try to copy the audio files out of the package, and drag the copy back to the guitar track. Do they play?
Should i upgrade to the latest operating system and the latest version of gb??? Any help would be very much appreciated. 2010 macbook pro.
Upgrading to a different system and the newest GarageBand 10 will not help, if we do not know, what is causing the problems on your Mac. Run software update to make sure,you are running the latest update of your current GarageBand version. -
"File Not Found" When opening a file in illustrator CS3
I having issues where when I click on a file it launches illustrator but then I get prompted with file not found. I then open illustrator and browse to the file and am to open it....any ideas? This one has me stumped.
I think I found the problem. I am using Illustrator CS5 (15.0.02) running on MacOS (10.7.5).
In my script, Folder.selectDialog function was returning "file:///Users/alex/Apps/temp", when I selected the temp folder from the dialog box. I want the function to return "/Users/alex/Apps/temp". If I hardcode the path (as shown below), the javascript runs fine.
// Select the source folder.
//sourceFolder = Folder.selectDialog( 'Select the folder with Illustrator files', '~' );
sourceFolder = Folder("/Users/alex/Apps/temp"); -
File not found error when checking file into SCC
I am attempting to setup the built in source code control features in Labview 7.0. I set up the master directory and my working directory. I copied the project I was working on into my working directory and opened the top level V.I.. I was able to successfully add it to the SCC. Then I was able to check it out and modify it. However when I check it back in I get the following error:
Error 7 occurred at Invoke Node in Version Control CIN.vi->SCC Enter Change Comments.vi->Builtin SCC Checkin.vi->Builtin SCC Checkin GUI.vi->Check In.vi
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use
\ as path separators on Windows, : on Mac OS, and / on UNIX.
NI-488: Non-existent board.
The path for my master directory is C:\temp\TestSCC and the path for the working directory is C:\temp\LVWD. I am able to undo check out, but I cannot check it back in with out getting this error.
I am using Windows 2000 5.00.125
Can anyone help?
JoshThere are some strange things that occur with the SCC. See the following posting and the comment from NI which suggests to clear the revision history.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000FEE20000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=Error+7+SCC&USEARCHCONTEXT_QUESTION_S=0
If the link doesn't work search on terms Error 7 and SCC it will be one of the first ones.
See also DevZone article titled: "LabVIEW 6.1 Source Code Control Doesn't Recognize Local Changes when Revision History is Used"
I found that the same thing still ccurred in LabVIEW 7. Not sure about LabVIEW 7.1 -
File not found error when Downloading Crystal Reports 2008
Hi,
I am trying to download a trial version of Crystal Reports 2008. I get the error "file not found" both times when I downloaded the zip file and opened it first from the Free trial link and next from the Diamond community page link. Can anyone help pls. ? Thanks ACNew location to download: http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
-
Linked PSD files not found when opening .ai files via shared folder
My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro so that I can get someone to help me on a big job. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.
The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files. Any ideas?
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6If you are rebooting the computer holding down T to share via firewire, that is your problem. that mounts the other computer as a hardrive and probably messes up the filepath.
Turn on sharing via Ethernet or wireless
Connecting two computers using Ethernet
You can use an Ethernet cable to connect two Mac computers and share files or play network games.
To connect two computers using Ethernet:
Connect a standard Ethernet cable from the Ethernet port on one computer to the Ethernet port on the other. You don’t need to use an Ethernet crossover cable.
If your computer doesn’t have an Ethernet port, try using a USB-to-Ethernet adapter.
On each computer, choose Apple menu > System Preferences and click Sharing. Note the computer name for each computer.
In the Finder on one of the computers, choose Go > “Connect to Server,” and then click Browse.
Double-click the other computer in the window and enter your password, if necessary.
If you manually configured the TCP/IP settings for the Ethernet service on the computer you are connecting to, you may need to enter that computer’s TCP/IP address in the “Connect to Server” dialog.
To see or set the TCP/IP address, choose Apple menu > System Preferences, click Network, and select Ethernet in the list. -
Could not load file/URL (file not found) error for JNLP file
I am completely baffled in trying to figure out why I am getting the following error for some JNLP files but not others:
Error: could not load file/URL specified: C:\Users\tom\AppData\Local\Temp\javaws2
java.io.FileNotFoundException: C:\Users\tom\AppData\Local\Temp\javaws2 (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(Unknown Source)
at java.io.FileInputStream.<init>(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)I have Googled around this forum and elsewhere, and have seen reports that this error is IE-specific, and seems to have something to do with no-cache headers being sent, or with the client browser's cache being full or turned off (which is not my case). I saw the information in the JavaWS FAQ, which recommended turning off security constraints for the JNLP's URI. I tried that, and it didn't help. One of the very baffling things is that I have created several variations of the JNLP file, with varying combinations of jars and property resources, and some combinations always work while other combinations never work. Here's an example:
<jnlp spec="1.0+" codebase="$$codebase">
<information>
<title>demo app</title>
<description>illustrates weird bug</description>
</information>
<resources>
<j2se version="1.5+"/>
<jar href="randomFile.jar"/>
<property name="xxx" value="xxxx"/>
<property name="swing.metalTheme" value="steel"/>
</resources>
</jnlp>The above file always fails with the error shown at the top of this message. However, if I remove either of the two properties, it works fine. And I have created other variations with lots of properties, some of which work. All of these variations are in the same directory in the war file, served by the exact same servlet (a slightly modified version of the jnlp.sample.servlet.JnlpDownloadServlet provided with JDK 1.6.0_3). Assuming that a no-cache header is the problem, what on earth could be causing some JNLP files to always be served with a no-cache header, while others are never served with a no-cache header?
On a related note, any recommended debugging techniques for seeing what headers are being transmitted? I tried adding a simple check for a "debug=true" parameter in the servlet that causes it to set the content type to "text/plain" instead of JNLP, and that allows me to see (rather than execute) the JNLP XML that's being returned, but it doesn't show me the HTTP headers that are being sent back. If any caching headers are being set, I think it must be being set by the servlet container itself, as it's nothing being set in the servlet code that I can see. So I don't see any way on the server side Java code to output or log the actual HTTP response (or is there?). Any tips in that regard much appreciated.
Edited by: TomC125468 on Aug 19, 2009 1:35 PMHi Luca-Sanna,
Thanks for the response. Re browsers, yes, it fails in IE but it succeeds in Firefox. The info on the JavaWS FAQ and other places all seem to indicate that it's an IE issue concerning handling of the cache-control headers.
I should check in my webserver forum (Sun WebServer 7) to see about logging options. Sniffing on the client side is not possible, as my app is required to use HTTPS exclusively, and unfortunately that also precludes a telnet GET request. -
"Audio File "Recording#27.aif" not found" Error Message- Please HELP!
Hi Everyone-
I was opening a podcast today to finish editing it and I got this error message, "Audio File "Recording#27.aif" Not Found" - and, naturally, when I opened the project, half of a phone interview was missing (or, rather, it shows up as purple balloons but each one says "File Not Found" inside). This file is the audio from the interviewer (the interviewee file is totally fine, as are all others in the podcast). When I load the project it asks if I want to search for this missing file, but when I click yes it says that it can't be found.
How can I find this file? What happened to it? Thank you for any ideas, suggestions, etc. For reference, I'm using GarageBand 3.0.4 on a MacBook Intel Core Duo 2Ghz and Mac OS X 10.4.11no, GB wouldn't delete anything on it's own. it only deletes files for which you've deleted the entire region from the timeline and then saved
if the file is not within the projects, i'm afraid it's gone, and i can't think of any way that could happen by itself B-(>
Well i guess I should warn others that copying and pasting is very dangerous stuff! I had two podcasts- in podcast #1 GB saved the interview file as "Recording#27.aif" and in podcast #2 GB saved a little intro clip under the same name. When I pasted the intro clip from podcast #2 into podcast #1 my interview disappeared. I didn't delete it- I was never asked about it, I didn't delete the region from the timeline, etc. I have to assume that since they had the same name, GB thought I no longer needed the "Recording#27" from podcast #1 and now I can't find it anywhere! If anyone has any suggestions as to how I could find this file I would be very appreciative. -
After System Copy warning file not found
Hi experts,
I got warning in my db2diag.log after performing system copy. My current SID is Q01 and previous one is P01.
2010-08-05-15.01.07.680835+420 E719728A497 LEVEL: Warning (OS)
PID : 1703936 TID : 1 PROC : R3trans
INSTANCE: db2q01 NODE : 000
FUNCTION: DB2 UDB, oper system services, sqloqualifydir, probe:30
MESSAGE : ZRC=0x860F000A=-2045837302=SQLO_FNEX "File not found."
DIA8411C A file "" could not be found.
CALLED : OS, -, unspecified_system_function
OSERR : ENOENT (2) "No such file or directory"
DATA #1 : File name, 15 bytes
/db2/P01/db2p01
Somehow after performing tp, R3trans. Db2diag.log show warning in accessing old path SID /db2/P01/db2p01.
I know it just warning but I wondering if this warning could lead to another error.
Any input will be appreciated.
Many thanks,
Aswin
Edited by: aswin cahyadi on Aug 5, 2010 10:14 AMHello Aswin,
As it seems to be the R3trans process that is linked to the warning message, please check the path definitions in your transport profiles. Check the directory, transport tool etc in STMS. Checck for any mention of the old sid.
Regards,
Paul -
File not found error 43 message. What is this?
I transferred a project to a friends logic and everything transferred fine except for the fact that every time we start the tune we get the notification: File not found, result code = -43. After we click through the first error code window another pops up and it says: Fade update failed, (error -43).
It is no big problem except for the fact that these come up every time we hit play. Then after we click through the error messages the song works perfectly.
Any ideas?
ThanksHi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS -
error 13.11 Source file not found verify that the file exsist
Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
File not found error after log on to ADF application
Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.
Maybe you are looking for
-
Open pdf file with the client's Reader, not in a browser, HOW ?
Hi All, I have a web application written in VB in wich an user can request to open a pdf file stored on the server. I'm looking for a script that will force the requested pdf to be opened in client's Reader and not in a browser's Reader plugin, Than
-
Is it possible to disable panel stretch/"scaling" on a ThinkPad X200?
A few months ago, I was enlightened by a thread about how to disable panel stretching and enable the execute disable feature on my N200 laptop (these were features I'd been missing for years) by means of SymCmos. Now that I have an X200, I was impres
-
No internal cam working on Maverick 10.9 Update
Hello all, hope someone can help, updated my 2011 Macbook air to 10.9 today and the internal cam no longer works, when I open Facetime or photo booth it says there is no connected cameras, went into the settings under camera and it says camera not fo
-
Hi, I have some DBA eperience from another platform...but i need to aquire Oracle DBA skills asap...i am currently running XE on XP/pro at home. my research tells me that XE is missing some of the features i need to prepare for the OCA exam, like EM.
-
Update unavailable with this apple id on 1 month new mac?
Hello, I brought a mac mini md387 just last month in september 2014, from apple authorised reseller in quest mall, kolkata, india. It came with OS X mavericks, keynote 6.2 and many free software, when I asked them that If I will get free updates they