Support for Topics in XI JMS Adapter

Hello Everyone,
I am trying to configure Topics instead of queues for JMS Adapter and I am not able to exchange messages with Topics. However, when I change Topics with Queues in JMS configuration file on XI 2.0, the scenario works okay.
Can anyone let me know if JMS adapter for XI 2.0 or XI 3.0 supports topics. If yes, then what changes should I make in order to exchange messages with Topics via JMS adapter.
Thanks,

Hi Lalit,
No support for JMS topics in SAP XI 2.0 nor XI 3.0.
I don't know why it isn't supported. Maybe SAP wants to avoid the hassle of configuring durable subscribers. And customers forgetting to remove durable subscriptions whereby message pile up until the JMS broker runs out of disk space.
Kind regards, Guy Crets

Similar Messages

Unable to deploy JMS adapter

hi
i have an problem when I finish to create an JMS adapter, JDEV display an message error
unable to get deployment file
i don't khow why??

Hi
its an error when i finished to create an JMS adapter, i was refereced to the topic of the JMS adapter
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/adptr_jms.htm#BABCCBFB
i realised all step for creating an JMS adapter but when i "clicked" finish he give me this error so JMS adapter doesnt create.
thanks

IDOC-XI-JMS Adapter

Hi
I have to build interface for scenario IDOC-XI-JMS adapter and legacy syetem is MQ-series. All the jar files has been deployed which is the pre-requisite to use JMS adapter.
Can anyone tell me if I should send data in file or as message.
Also if you can tell me the steps to build this interface. Please refer to some relevant blogs but would appriciate if you can explain me steps.
Points will be rewarded for the appropirate replies.
Regards

Hi,
>IDOC-XI-JMS adapter
Sender Side IDOC Adapter, Hence No Need Sender Agreement, Import the IDOC in XI System , Declare the Data Type for the Receiver side..Message Type..Message Interface as Ingoung..Do Message Mapping..Interface Mapping..In Configuratio Receiver JMS Adapter. Mention the Driver Information,User ID & Password and go ahead and test it
Regards
Agasthuri Doss

EndSeparator in JMS adapter

Hi,
Has anybody used end separtor for each record in JMS adapter?
I would appreciate, if anybody provides any information.
Thank you,
Jag.

Jagdish,
Have you tried with xml.endSeparator = 'nl'. I think it will work.
Kindly refer the below doc for reference.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Best Regards,
raj.

JMS Adapter Classpath

Folks...
I am having problems with a conflicting Java .class file existing on WebAS and in a WebLogic driver I deployed for use with the JMS adapter. I am looking for a problem solving approach for this issue.
I am able to post a message to WebLogic using a JMS receiver adapter, but the adapter immediately invalidates with a ClassCast exception once the message has been posted. After intensive debugging of the Java code in the driver I have discovered that this due to a conflict with WebAS due to a .class file with the exact same name. Specifically Request.class. WebAS has a Request.class and the WebLogic driver contains a Request.class, hence the ClassCast exception.
What I am hoping is that there is a way to isolate the classpath for the adapter so that I can prioritize the .jar file before the standard SAP .jars. This way the adapter will find the WebLogic Request.class file before the SAP Request.class.
If someone has a different way to approach this problem I am all ears. As usual many thanks for reading this note. -Jonathan

Folks... In case anyone is interested. The full path for the Request and Response objects in WebAS are
\usr\sap\RKK\JC01\j2ee\cluster\server0\apps\sap.com\tc~uddi\servlet_jsp\uddi\root\WEB-INF\classes\com\sap\uddi\interfaces
\usr\sap\RKK\JC01\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.netweaver.bc.uwl\private\classes\com\sap\netweaver\bc\uwl\core\push
They appear to be related to UDDI and UWL. So this afternoon I am going to try and delete them to see if the problem is corrected. If anyone has information on what these class files do then that would be helpful as well. I know that WebAS comes out of the box with services that are not always used by every usage type. It may be that these files are not needed by XI.
Thanks

JMS adapter could not receive message from Tibco EMS topic

I'm trying to consume message from tibco EMS topic using Oracle SOA JMS adapter. Can anyone please let me know the steps to do this. Appreciate your help.
Thanks,
SB

Increase Log level for cube.activation to debug and check the logs by stopping & starting the activation agent(I mean Retire and activate the process) .. It should give a clue on what's happening..

JMS Adapter Supports below message

Hi Frnds,
I am working on one scenario i have to read and write RFH2 Message from MQ,we decided to use jms adapter.
JMS Adapter supports below Message to put in MQ,
<Data>
     <MQRFH2>
          <usr>
               <TransactionType>GL_Update</TransactionType>
               <Environment>LIVE</Environment>
               <SourceScheme>EANCM</SourceScheme>
               <SourceApplicationId>5051150003606</SourceApplicationId>
               <DestScheme>EANCM</DestScheme>
               <DestinationRouting>5051150003330</DestinationRouting>
               <OriginalRouting/>
               <MessageRecordCount>1</MessageRecordCount>
               <BusinessTransactionId>20090405193001</BusinessTransactionId>
               <ParentBusTID/>
               <ParentBusId/>
               <EECode>Y</EECode>
          </usr>
          <mcd>
               <Msd>xml</Msd>
          </mcd>
     </MQRFH2>
     <Message>
          <GL_Update>
               <header>
                    <SourceEAN>5051150003606</SourceEAN>
                    <DestinationEAN>5051150003330</DestinationEAN>
               </header>
               <detail>
                    <AuthorisedUser/>
                    <HeaderText/>
                    <HeaderReference/>
                    <PostingItem>
                         <ProfitCentre>7027101000</ProfitCentre>
                         <CostCentre/>
                         <AccountCode>0001413150</AccountCode>
                         <GlobalBusinessIdentifier>AU10</GlobalBusinessIdentifier>
                         <MonetaryAmount>0000000100.00</MonetaryAmount>
                         <GlobalCurrencyCode>AUD</GlobalCurrencyCode>
                         <RunDate>20080725</RunDate>
                         <Description>IV006270M000000000000000000001</Description>
                         <WorkBreakdownStructureElement/>
                         <BudgetRequest/>
                         <TransactionType/>
                         <TransactionNumber/>
                         <PostingKey>50</PostingKey>
                         <SalesTax>
                              <SalesTaxCode/>
                              <SalesTaxAmount/>
                         </SalesTax>
                         <PersonnelNumber/>
                         <Assignment/>
                         <CalculateTaxBase/>
                         <BaselineDate/>
                         <PaymentTerms/>
                         <MedicalReference/>
                    </PostingItem>
                    <PostingItem>
                         <ProfitCentre/>
                         <CostCentre/>
                         <SalesTax>
                              <SalesTaxCode>P3</SalesTaxCode>
                         </SalesTax>
                    </PostingItem>
                    <PostingItem>
                         <ProfitCentre>7022001001</ProfitCentre>
                         <CostCentre/>
                         <AccountCode>0001701001</AccountCode>
                    </PostingItem>
               </detail>
               <trailer>
                    <thisDocumentGenerationDateTime>20090405T072928Z</thisDocumentGenerationDateTime>
                    <thisDocumentIdentifier>20090405T072928Z</thisDocumentIdentifier>
               </trailer>
          </GL_Update>
     </Message>
</Data>
please help me on this
it possible to achieve using JMS adapter or not?? what is the alternative solution ??
Regards,
raj

Hi RSR,
JMS is the better way to connect sonic MQ.below iam attaching you few points while using JMS.
1.for the JMS adapter an external driver is needed (java archive)
2.this archive is provided by the respective provider of the queuing system
3.the driver has to be deployed via SDM , see XI configuration guide for details
4.Routing rules and sender has to be specified as for any other channel in the directory
    object model
5.the message header information is determined from the appropriate sender
   agreement for the communication channel
6.the communication channel defined must be used in exactly one sender agreement
7.at least the interface name and the sender service must be qualified in the
    sender agreement ,other fields are optional
Depending on the transport protocol selected, specify the following :
8.For Sonic MQ JMS Provider :
·        Java class QueueConnectionFactory
·        Java class queue
·        IP address or server name
·        Server port
·        JMS queue
9.JNDI JMS Provider Lookup
·        JNDI name of QueueConnectionFactory
·        JNDI name of JMS queue
·        Name of JNDI Initial Context Factory
·        Address of JNDI server
·        JNDI users
·        JNDI password with confirmation
10.
For WebSphereMQ (MQ Series) JMS Provider
·        Java class QueueConnectionFactory
·        Java class queue
·        IP address or server name
·        Queue manager name
·        Channel name
·        JMS queue
·        Character set for non-ASCll names
·        Transport/network protocol
·        Target client
11.
JMS Provider Administered Objects via File
   File name of serialized object QueueConnectionFactory
   File name of serialized object Queue
With Rgds,
MF.Haq

JMS adapter settings for response to dynamic queue

Hello,
We are sending a message through JMS to SAP in a synchronous manner (client waiting for the reply after sending the request). The SAP is receiving and processing the message.
We configured the JMS Sender & Receiver channel as per solution given in SDN for the quetion. ( (2.8) Does the JMS Adapter support the JMSReplyTo feature? )
1. In Sender communication channel, checked the "JMS Message ReplyTo Destination" attribute of 'Adapter specific message attributes'
2. In Receiver communication channel, added the "JMS.Message.DynamicDestination" parameter and value 'true' (without quotes for both strings) in "Set JMS Additional Parameters" table
3. Added the "JMSReplyTo" header syntax in input xml message as below:
                    a. Message : <?xml version="1.0" encoding="UTF-8"?>
                             <ns0:getEmployeeInfo xmlns:ns0="namespace">
                             <employeeId>0000001</employeeId>
                             </ns0:getEmployeeInfo>
                    b. Destination = com.someDestination
                    c. JMSReplyTo= com.someReplyQueue
We have selected Transport protocol option "Access JMS Provider Generically"
But it is not able to send the reply to replyTo destination of the message.
Wondering if there is anything in the JMS Adapter setting like reply to Destination (technical term DCJMSReplyTo) which can be set to reply queue of the message (to a dynamic destination).
Please let me know in case anybody knows about the same.
Thanks & Regards,
Jayashri Rade

Refer: http://docs.oracle.com/cd/B14099_19/integrate.1012/b25307/adptr_jms.htm
•The JMS API specifies three types of acknowledgments that can be sent by the JMS publisher:
◦DUPS_OK_ACKNOWLEDGE, for consumers that are not concerned about duplicate messages
◦AUTO_ACKNOWLEDGE, in which the session automatically acknowledges the receipt of a message
◦CLIENT_ACKNOWLEDGE, in which the client acknowledges the message by calling the message's acknowledge method

Language support in JMS adapter with Oracle JDev 10.1.3.1

Hi,
I' using JDeveloper 10.1.3.1 with Oracle SOA Suite - ESB 10.1.3.1 in the following scenario:
1) Use Database adapter with "on insert" condition to read Student record with Chinese name (Unicode format) - ESB process
2) Use JMS adapter to push this data into "DemoTopic" as string - ESB process
3) Use Message Driven Bean's (EJB 3.0) "onMessage" method to fetch the data from JMS topic - J2EE app
4) Use JDBC executeUpdate to update this Chinese name into another database table - J2EE app
5) Finally, verify the updated Chinese name in ADF application - J2EE app
Prerequisites
1) The database charset on both sides of the flow is UTF8
2) The ADF application JSF page encoding is UTF8
3) The SOA Suite is installed on DB repository (UTF8 charset)
Result
1) The flow from Step 1-5 works.
2) But, the println of the JMS message (holding the Chinese name) gives "????" when checked with Wordpad (Unicode readable word processor)
3) Junk characters are inserted into the database
Please let me know where I'm going wrong. Also, let me know if I need to configure/set the character encoding in OC4J, or the JMS adapter and how.

Hi all,
This is been resolved by using the AL32UTF8 character set in the database. JMS adapter by default supports UTF-8. No setting/configuration needs to be done.

JMS Adapter TOPIC

Hi,
Is there any technote available for JMS Adapter like that of DB Adapter. I am not able to consume a message from TOPIC when another BPEL Process produces the message in the TOPIC.
Any help in this direction.
Thanks
Rgds,
Nagarajan K.

I looked at the documentation, but my wsdl and bpel.xml look okay. Here's the error that I'm getting when I deploy. Are there any docs on configuring an MQ adapter?
The process domain encountered the following errors while loading the process "M
QReceive" (revision "1.1"): Could not initialize activation agent.
BPEL container could not initialize activation agent class "oracle.tip.adapter.f
w.agent.jca.JCAActivationAgent". The reason is AdapterFrameworkImpl::endpointAct
ivation - Endpoint Activation Error.
The Resource Adapter JMSAdapter was unable to activate the endpoint :{} due to t
he following reason: java.lang.Exception: No jca:operation defined/found!
Please correct the reported issue and redeploy the BPEL process.
Please ensure that the activation class "oracle.tip.adapter.fw.agent.jca.JCAActi
vationAgent" is configured correctly in the bpel deployment descriptor (bpel.xml
)

Distributed topic - JMS adapter consuming duplicate messages

We have distributed topic thats consumed by a composite (JMSadpter in mediator).
We see for every one message sent the composite consumes the message twice. (With forwarding policy set to partitioned)
Is this an expected behavior? and how do we make the consumer (JMS adapter) consume only once per message
Thanks
Vijay

From the documentation (provided here: http://download.oracle.com/docs/cd/E21764_01/integration.1111/e10231/adptr_jms.htm)
The JMS API specifies three types of acknowledgments that can be sent by the JMS publisher:
- DUPS_OK_ACKNOWLEDGE, for consumers that are not concerned about duplicate messages
- AUTO_ACKNOWLEDGE, in which the session automatically acknowledges the receipt of a message
- CLIENT_ACKNOWLEDGE, in which the client acknowledges the message by calling the message's acknowledge method
Could you check in the weblogic-ra.xml what acknowledge mode has been configured:
<property>
<name>AcknowledgeMode</name>
<value>AUTO_ACKNOWLEDGE</value>
</property>
...Note that when DUPS_OK_ACKNOWLEDGE is used it can happen that a message is consumed more than once.
Are you also sure that the message is not produced twice?
Seminar on Cloud Computing - http://middlewaremagic.com/weblogic/?p=7387

JMS Adapter: Dynamic DestinationName for third party queue

Hello everbody!
Is there a way to make the "DestinationName" of the JMS Adapter for a third party JMS provider dynamic somehow? Like using a jndi lookup for the queue name instead for hardcoding it into the wsdl?
Thanks a lot.

Hi all,
Can any one guide me in the following requirements:
Hello,
can any one please help me in this issue:
1) JMS Name and Description
2) Parameter Values for Provider Context Factory, Connection Factory, and Default Provider URL.
Please note that the Agile PLM system fills in the fields with server-specific defaults but we must validate they are accurate.
3) User Name and Password to access the queue
1.1) JMS Name : its an queue name
Description : Queue/ Topic with JNDI name
2.1) Context factory :
what is it?
how to create it and where to create.
2.2)connection factory: connection factory name and JNDI.
2.3) how to get the Default URL from web-logic.
3.2) User name/ password : xxxxxxxxx/abcd00000. this can be set from security realms by creating the user and and assigning that user to the queue and policies.
can any one clarify my doubts in it.
Anil

Platforms supported by JMS adapter

Hi ,
Can anybody tell which platform/OS the JMS adapter supports ?
Regards,
Tarang

Tarang,
There is nothing to do compatibility support for JMS adapter. The one and only thing is the JMS provider like MQ-Series , Sonic MQ etc.. needs to be anlayzed for Platform/OS compatibility.
Best regards,
raj.

Configuring JMS adapter for a BPEL process which puts a msg in a Q of MQ

Hi,
I am trying to develop a BPEL process which picks up a message from a Q in Websphere MQ and puts that message in another Q of MQ after processing that.
I have updated the oc4j-ra.xml with the following inputs:
<connector-factory location="eis/MQSeries/Queue" connector-name="Jms Adapter">
          <config-property name="connectionFactoryLocation" value="com.ibm.mq.jms.MQQueueConnectionFactory"/>
          <config-property name="factoryProperties" value="QueueManager=TestManager;TransportType=1;Hostname=machine's ip address;Port=1414;Channel=channel name for connecting to client"/>
          <config-property name="acknowledgeMode" value="AUTO_ACKNOWLEDGE"/>
          <config-property name="isTopic" value="false"/>
          <config-property name="isTransacted" value="true"/>
          <config-property name="username" value="admin"/>
          <config-property name="password" value="welcome"/>
     </connector-factory>
But while testing the BPEL process, I get the error:
<remoteFault>
<part name="code" >
<code>null</code>
</part>
<part name="summary" >
<summary>file:/D:/OraBPELPM_2/integration/orabpel/domains/default/tmp/.bpel_MQMessaging_1.0.jar/Outbound.wsdl [ Produce_Message_ptt::Produce_Message(SourceEmployee) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: Adapter Framework unable to create outbound JCA connection. file:/D:/OraBPELPM_2/integration/orabpel/domains/default/tmp/.bpel_MQMessaging_1.0.jar/Outbound.wsdl [ Produce_Message_ptt::Produce_Message(SourceEmployee) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-12141 ERRJMS_CONN_FAC_NOT_FOUND. Unable to instantiate connection factory. JMS adapter was unable to look up the connection factor com.ibm.mq.jms.MQQueueConnectionFactory neither through JNDI nor instantiate it as a Java class Please examine the log file to determine the problem. ; nested exception is: ORABPEL-12511 Adapter Framework unable to create outbound JCA connection. file:/D:/OraBPELPM_2/integration/orabpel/domains/default/tmp/.bpel_MQMessaging_1.0.jar/Outbound.wsdl [ Produce_Message_ptt::Produce_Message(SourceEmployee) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-12141 ERRJMS_CONN_FAC_NOT_FOUND. Unable to instantiate connection factory. JMS adapter was unable to look up the connection factor com.ibm.mq.jms.MQQueueConnectionFactory neither through JNDI nor instantiate it as a Java class Please examine the log file to determine the problem. Please examine the log file for any reasons. Enable DEBUG logging in the BPEL Console. </summary>
</part>
<part name="detail" >
<detail>null</detail>
</part>
</remoteFault>
Can anyone tell me what has gone wrong in setting the connection factory for the Q or what else I have to configure to sort out this problem?
Thanks,
Jayatu

I am experiencing the exact same issue while configuring for Tibco EMS!!!
I have also checked the oc4j-xa.xml file etc and I am also unable to find any guidance on the steps required from XML config files through to adapter wizard entries!

Sender JMS adapter configuration for IBM MQSeries

Dear All,
i am doing a IBM MQSeries 5.2.x Message ->sender JMS adapter -> XI server -> receiver RFC adapter -> R/3.
i have deployed the JMS adapter with the required jar files of IBM MQSeries 5.2.x in XI server.
in Sender JMS adapter configuration for IBM MQSeries 5.2.x, i have put following data:
1. Transport Protocol: Websphere MQ - is it okay?
in JMS provider settings:
2. in channel name - what should be there?
3. Transport Network protocol should be TCP/IP or WebsphereMQ - how to decide this thing.
4. JMS Complaint - whether WebsphereMQ or JMS API.
in JMS Settings:
5. JMS Queue user - is this IBM MQSeries 5.2.x Queue User or someother user?
6. JMS Message Selector - what data to take here.
So if anybody has connected IBM MQSeries 5.2.x to XI via JMS adapter, please answer my above queries.
Regards,
Rajeev Gupta

Hi Swaroop,
you can send me those documents at my gmail-id : [email protected]
Hi All,
one more question - to connect XI server to IBM MQSeries via JMS adapter in ID, do we need to have a MQSeries Client installed on XI server - or - just by configuring JMS adapter, we can send messages from IBM MQSeries to XI server without any MQSeries client on XI server?
Why Channel name is required in JMS configuration data?
Thanks,
Rajeev Gupta

Support for Topics in XI JMS Adapter

Similar Messages

Maybe you are looking for