Support Webinar - Troubleshooting Search Database Anomalies - Recorded

Hello,
This webinar was completed and recorded on 5/27 and is now available for download and viewing.
What tools and methods are available to help troubleshoot issues with the search index?
What is the benefit of using Search Repair and Search Update vs. Search Rebuild?
What methodology does Technical Support use to understand and resolve issues with discrepancies between search index and the database?
These are just some of the topics covered in this entry in the series of Technical Support Brown Bag Webinars for WCI. Our demonstration focuses on areas where WCI Support sees the largest numbers of customer questions become support incidents in an effort to help avoid the need to create an incident to resolve issues in the customer environment. In this webinar we demonstrate the most recent version of WCI (10.3.0.1) but the information applies to previous versions as well.
If you would like to view this 1 hour webinar click the link here to download and view:
https://oracleaw.webex.com/oracleaw/lsr.php?AT=dw&SP=MC&rID=56494767&rKey=99a5997008e7d549

Hello BeeJenkins,
Is this problem still occurring in your environment? What service pack do you have applied to Fast Search for SharePoint 2010? I have seen prior that similar
issues can occur with certain excel spreadsheets due to corruption. Performing iterative testing of removing one page from the document at a time including the default page, and re-feeding the document, can narrow down the problem content to the specific
page. Did you happen to try that step? Other items I might suggest to be verified on all Fast servers include making sure that we have the correct antivirus exceptions configured (http://technet.microsoft.com/en-us/library/ff381239.aspx,)and
TCP & IP Task offloading (http://support.microsoft.com/kb/2570111)
disabled including at the NIC adapter and Teaming configuration (if you are teaming NICs.) Let us know your findings.
Thanks!
Rob Vazzana | Sr Support Escalation Engineer | US Customer Service & Support
Customer Service & Support
Microsoft| Services

Similar Messages

Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
 May 14 2014 18:34:29
 Copyright (c) Microsoft Corporation
 Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

LiveCycle Designer 8-scripting search Access DB records

Hi
I am new to LiveCycle Designer 8 having it included with Acrobat Pro 8. I have been trying to set up a basic form that can interact with an Access 2007 DB. Following the help guide, online tutorials, I have been able to set up the data connection, figure out how to establish a "trusted environment" and added several buttons as a test. Using JS, the next, previous, update, first and last buttons work, populating the form fields with the sample DB data and updating the DB (update). Can't get the add new record button to work even though the JS scripting is precisely that shown in the same tutorials for the other buttons. If I delete the text in the on screen cells in the .pdf form, enter new text, click add, all that I added disappears. Checking the DB, nothing has been added. Same difficulty with deleting a record, and the current opened record does not delete.
Reading a posting suggesting setting up an SQL query instead, leaving of any auto-incrementing item (like ID), and using the JS scripting for the button (don't yet know how to use SQL for next, previous, update, etc.), still couldn't get the add new or delete to work. Tried every combo of no user name, no password to user name, password blank, etc. No success.
The other needed capability for the test form is the ability to search the DB records, for example by name or ID, for example by the user entering a name or ID in a text input box, clicking a "search" button and the record (if it exists) displaying in the other cells. Then, once found, it could be updated or deleted. One tutorial aims to populate a drop down list box with the data from a specific DB column. It doesn't use JS, rather FormCalc (which kept generating error messages, when I tested it out))and is far too complex for my limited novice skills. If I could display a drop down list box with all of the names and ID's in a DB, the user could choose one and once the record would populate the cells, they could update or delete it.
So, I'm stuck. Can't get the add new or delete to work and can't figure out how to set up a search to identify records for update or delete. I've read and read anything I can find online, in the Adobe knowledge base, forum, blog postings, trying out many ideas without any success.
I am hoping someone can help with some suggestions, sample scripts, hopefully understandable by a beginner.
Any help would be appreciated.
Kind Regards,
Stephen
[email protected]

Here are some good blog entries
http://forms.stefcameron.com/2006/09/18/connecting-a-form-to-a-database/
http://forms.stefcameron.com/2006/09/29/selecting-specific-database-records/
I also did a tech talk for the Acrobat Users Group where we talked about Database connectivity. Here is a link to that webinar for the replay
http://adobechats.adobe.acrobat.com/p69655795/
Paul

Unable to process support message in solution database

Dear Expert ,
In service desk when i trying to save any support message in solution database .Its through error.
Error when processing your request
What has happened?
The URL http://solman.tryecare.com:8000/sap/bc/webdynpro/sap/wd_sdk_sdb_create_entry/ was not called due to an error.
Note
The following error text was processed in the system FCS : The ABAP/4 Open SQL array insert results in duplicate database records. records in the data base.
The error occurred on the application server solman_FCS_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: ISMV_POST_SYMP of program SAPLISMV
Function: ISMV_GENERATE_SYMPTOM of program SAPLISMV
Form: GENERATE_SYMPTOM of program SAPLISMB
Form: POST_SYMPTOM of program SAPLISMB
Form: %_PROCESS_P_O_C of program SAPMSSY0
Form: %_COMMIT of program SAPMSSY0
Method: CREATE_SDB_SYM_SOL of program CL_SDK_SDB_NOTIFICATION=======CP
Method: SAVE_WORK of program /1BCWDY/87Q4WT7CHMIIT1OWR9O3==CP
Method: IF_COMPONENTCONTROLLER~SAVE_WORK of program /1BCWDY/87Q4WT7CHMIIT1OWR9O3==CP
Method: ONACTIONBTN_SAVE of program /1BCWDY/87Q4WT7CHMIIT1OWR9O3==CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system FCS in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server solman_FCS_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 2 in transaction ST11 on the application server solman_FCS_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Regards
Ashok

Dear Ashok,
Concerning the described error, Please review the following SAP notes :
1124452 - Dump in ISMV_POST_SYMP during problem/solution-creation
1002299 - Missing Customizing data in SAF, Part II
I hope that the notes resolve your issue.
Regards
Amit

*New Dates For* Upcoming Support Webinars & Info About Support

Dear Oracle Primavera Customers:
As of November 2009, the Oracle Primavera software support team has completed the migration and integration to Oracle Global Customer Support. This is an exciting time for the support organization, as we will now utilize and leverage the same tools and resources. Additionally, our clients will have one centralized location when contacting the support organization. We are sending this message to provide a brief reminder of how you can contact Oracle Support and where to go if you have questions.
Contacting Support
Please use your Oracle Support Identifier (SI) to contact Oracle Support either via the My Oracle Support portal or by telephone:
- [My Oracle Support |https://support.oracle.com/CSP/ui/flash.html]
- [Global Support Phone Numbers|http://www.oracle.com/support/contact.html]
Support Identifiers were sent to directly supported customers in October 2009. If you misplaced your SI or never received one, please call the [Oracle Support hotline|http://www.oracle.com/support/contact.html] .
If you contact Oracle Support by telephone, please note that Oracle's Customer Care team will take the call. The Customer Care team handles initial logging of all issues received by telephone, local language support and translation, exception handling, and handling of all non-technical questions and issues. The Customer Care team is available to handle all questions related to a customer's Support Identifier (SI) and can walk through the My Oracle Support registration process and logging of a new Service Request (SR), if needed.
Technical Service Requests logged by customers either directly via My Oracle Support or via the Customer Care team will be automatically routed to the appropriate Primavera Support Engineer for technical issue triage, analysis, and resolution. Once your request is assigned to an Engineer, you can speak directly to the Engineer regarding the status of your request by calling the [Oracle Support hotline |http://www.oracle.com/support/contact.html] and entering your service request number. Doing so will transfer your call directly to the Engineer working on your request.
Need Help?
•Please plan to attend one of our upcoming live Support webinars. This webinar will review the information you need to work effectively with Oracle Global Customer Support. Below are the details for both the conference call and web conference for the webinars in late March and on April 1, 2010.
[Primavera Webinar Conference Call Dial In Information |https://strtc.oracle.com/imtapp/app/imtdocvw.jsp?did=10274761&docToken=ZGlkPTEwMjc0NzYxJm1JRD02NDk3NDYyJmlzQ29udmVydGVkPXRydWUmaXNBcmNoaXZlPWZhbHNl]
Pass code for the web conference and conference call is Primavera
Web conference link is below each session date/time
Tuesday, March 30, 2010 11AM US Eastern Time
[https://strtc.oracle.com/imtapp/app/sch_mtg_details.uix?mID=6497462]
Wednesday, March 31, 2010 2PM US Eastern Time
[https://strtc.oracle.com/imtapp/app/sch_mtg_details.uix?mID=6497477]
Thursday, April 1, 2010 11AM US Eastern Time
[https://strtc.oracle.com/imtapp/app/sch_mtg_details.uix?mID=6497485]
- For questions about your Support Identifier (SI), issues with My Oracle Support and/or questions about how to use My Oracle Support, please contact Oracle Support Customer Care by calling the [Oracle Support Hotline|http://www.oracle.com/support/contact.html] .
- For questions about Oracle support processes, systems, the support model and/or training on My Oracle Support, please visit the [Primavera Welcome Center on My Oracle Support|https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=888813.1] .
We look forward to speaking with you at an upcoming Support webinar and assisting you with your continued success with Oracle Primavera applications.
Regards,
Oracle Primavera Customer Support

CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

Maximum number of user mailboxes supported by single Exchange Database in 2007 / 2010 & 2013 ?

What is the Maximum number of user mailboxes supported by single Exchange Database in 2007 / 2010 & 2013 ?
Aditya Mediratta

Agree with Keith, there is no MB # limit, however there are practical concerns such as DB size and how that effects recoverability as well as performance. In terms of extremes we had one major educational customer that had 35K Mailboxes in
a single database so you can utilize a ridiculous # of mailboxes in a DB if desired. IMO you are better off to keep the # of mailboxes to a reasonable level, i.e. no more than 250-500 mailboxes per DB
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope

Walk thru all database table records until match is found then delete

I have a database connected form. It has a scipt that checks to see if that forms data has already been submitted by searching thru the records for the formID number. I want the records to be deleted if found and then add new records incase the form data has been changed. I can make this work once by using the script below. Is there a short way to make it continue searching and deleting all the records that start with that form ID number instead having to copy this script 12 times (maximum number of records allowed).
var oFile = Subform1.FileName.formattedValue;
var bFound = false;
while(!oDB.isEOF()){
if(xfa.record.DataConnection2.FileName.value == oFile){
bFound = true;
break;
oDB.next();
if(bFound){
oDB.delete();
oDB.update();

types : begin of ty_jtab,
       f1(10) type c,
       end of ty_jtab.
data : jtab type standard table of ty_jtab with header line,
       itab type standard table of ty_jtab with header line.
data : wa_jtab type ty_jtab,
       wa_itab type ty_jtab.
*populate itab for say db
itab-f1 = '1000'. append itab.
itab-f1 = '2000'. append itab.
itab-f1 = '3000'. append itab.
*populate jtab
jtab-f1 = '1000'. append jtab.
jtab-f1 = '4000'. append jtab.
jtab-f1 = '8000'. append jtab.
jtab-f1 = '9000'. append jtab.
sort itab by f1.
sort jtab by f1.
clear: itab, wa_itab.
loop at itab into wa_itab.
read table jtab into wa_jtab with key f1 = wa_itab-f1
                                         binary search.
if sy-subrc ne 0.
    delete itab from wa_itab.
    if sy-subrc ne 0.
      write :/ 'fail', wa_itab-f1.
    endif.
endif.
endloop.
*o/p is two times fail which shows the assumption.
br,
vijay

Bug in the search database of Javahelp

Hi all,
in this project I am importing from Framemaker and generating Javahelp output. The Javahelp does not work when there are non-ASCII characters in the topic filenames (such as accents or umlauts). Therefore I have to adjust the file naming in the imort settings to "<$filename_no_ext>-<n>". As a result I get topics with numbered filenames and all seems well.
BUT with this setting the Javahelp displays the totally cryptic filenames of the topics as search results. Why does Robohelp not create a search database with the topic titles as search results?
How do you handle Javahelp projects for non-english languages?
Robert

I have the same problem. I have a registered domain name which contains a "-" character. Its not possible to set it correctly because it is filtered out. A "-" is an valid part of a domain name so why it is filtered? I have tried to edit the bootpd.plist file, but its getting overidden after a few seconds.
Could anyone help? A fix is absolutely necessary, without it I have to change the search domain on all client computers.

Pagination support for non-Oracle databases?

Hi,
I just read this thread (Pagination Support on pagination support. Is there any way to get pagination with non-Oracle databases? We are using an IBM iSeries / AS/400 DB2 database right now, and we're planning to use some local lightweight database in the near future as well (probably Cloudscape/Derby or "IBM Everyplace database".)
We currently use code like this:
String sql = "SELECT art FROM Artikel art" +
 /* dynamically generated where statement is added here */
 + "ORDER BY art.artikelNummer";
Query q = em.createQuery(sql);
q.setFirstResult(firstResult);
q.setMaxResults(maxResults);If I look in the TopLink logs, I see queries like this:
SELECT ARTNR, ARALT, ARAFJ, ARXII, ARAVJ, ARXIV, ARANJ, AHGCD, ARNVJ, ARCRJ, ARARK, ARFKJ, ARTNK, ARGP1, ASGCD, ARGP2, ARPR1, ARGP3, ARPR2, AREX1, ARPR3, AREX2, ARPR4, AREX3, ARASA, ARINA, ASSCD, ARIA1, ARBAN, ARIN1, ARBAV, ARIA2, ARBAK, ARIN2, ARCES, ARIA3, ARCDT, ARIN3, ARCRE, ARIA4, ARCWK, ARIN4, ARHBH, ARIA5, ARDFA, ARIN5, ARDFG, ARIA6, ARDOS, ARIN6, AREPW, ARINN, ARFOD, ARIAS, ARFOE, ARINS, ARFOF, ARNAB, ARFOI, ARNIB, ARFON, ARNIA, ARFOS, ARNN1, ARFTA, ARNA2, ARVIV, ARNO2, ARGAP, ARNN3, ARGPT, ARNA4, ARGPD, ARNO4, ARGPA, ARNN5, ARGPO, ARNA6, ARHIS, ARNN6, ARISP, ARNIO, ARKHM, ARNNS, MAGCD, AROVJ, MTGCD, ARPL1, ARMXM, ARPL2, MRKCD, ARPL3, ARMVR, ARVKJ, ARMIM, ARV12, ARMDT, ARVVJ, ARMTE, AR#VR, ARMTU, ARZLS, ARMTM, ARIAT, ARMWK, ARAVS, MPCCD, ARNVS, ARBTW, ARFJS, ARXI2, ARG2S, ARXI3, ARE1S, ARXI4, ARE3S, ARXI6, ARIB1, ARXI1, ARIB2, ARXI5, ARIB3, AROPI, ARIB4, ARPRV, ARIB5, SZGCD, ARIB6, ARSPC, ARINO, ARSMF, ARIOS, VEAAN, ARNIS, ARSYN, ARNO1, ARVR1, ARNA3, ARV1S, ARNN4, ARVR2, ARNO5, ARV2S, ARNIN, ARVR3, ARNOS, ARV3S, ARP1S, ARTFA, ARP3S, ARTFG, ARS12, ARUVC, ARZLD, ARUCW, ARAJS, ARBKV, ARCJS, ARVVI, ARG3S, ARVVP, ARINB, VPOCD, ARIO2, VPECD, ARIO4, ARVIH, ARIO6, ARVHG, ARNBS, ARVRW, ARNN2, ARVPR, ARNA5, ARVVR, ARNAS, ARVVS, ARP2S, ARVV1, ARSVV, ARZK1, ARNJS, ARNA1, ARNO3, ARIO1, ARNO6, ARIO5, AROJS, ARE2S, ARVJS, ARIBS, ARIAD, ARIO3, ARG1S FROM ART WHERE ((((ARUVC = 'N') AND (ARHIS = 'N')) AND (ASGCD = 7)) AND (AHGCD = 15)) ORDER BY ARTNR ASC
(Yeah, I know we have too much columns in the table...)
So, no pagination in the query. As you can see, we have a mechanism in place to dynamically generate a where clause. This is because the user can set filters. The problem is, if our user sets a filter that causes the result set to be significantly smaller, the performance is way better than when he sets no filter at all. We suppose this is because the whole result set is sent to TopLink, regardless of the values of firstResult and maxResults.
We are using TopLink Essentials 2.1-10, by the way.
Message was edited by:
Bart Kummel

Hi all,
I'm trying to subclass <tt>DatabasePlatform</tt> to add pagination support for the AS/400 DB2 database of my customer. To be fair, it is not going very well so far.
The first problem is, the query Chris found by googling (Re: Pagination support for non-Oracle databases?), does not work for AS/400s version of DB2. In fact, although it is called "DB2", the database on the AS/400 system is a whole other database than the "normal" DB2 database that runs on Windows and *nix. The AS/400 DB2 simply does not have a "ROW_NEXT" function.
Another option would be to use the row_number() over() mehtod. But, as can be read here, this function is only available from version V5R4 of OS/400. And guess what? We're stuck on V5R3 at this client. (We cannot upgrade, because there's an application in use that's written in Delphi and IBM dropped the Delphi binding from V5R4...)
So I pretty much ran out of options. On the mailing list I linked to above, someone mentions the option to make a sort of stored procedure that generates a row count number. An example of how to do this can be found here. I implemented it, and ended up with this code:
package com.myclientsname.persistence;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import org.eclipse.persistence.expressions.ExpressionBuilder;
import org.eclipse.persistence.internal.databaseaccess.DatabaseCall;
import org.eclipse.persistence.internal.expressions.ExpressionSQLPrinter;
import org.eclipse.persistence.internal.expressions.SQLSelectStatement;
import org.eclipse.persistence.internal.sessions.AbstractSession;
import org.eclipse.persistence.logging.SessionLog;
import org.eclipse.persistence.platform.database.DatabasePlatform;
import org.eclipse.persistence.sessions.SessionProfiler;
public class AS400Platform extends DatabasePlatform {
 private static final long serialVersionUID = 0L;
 public AS400Platform(){
 super();
 super.setShouldBindAllParameters(false);
 public void printSQLSelectStatement(DatabaseCall call, ExpressionSQLPrinter printer, SQLSelectStatement statement) {
 int max = 0;
 int firstRow = 0;
 if (statement.getQuery()!=null){
 max = statement.getQuery().getMaxRows();
 firstRow = statement.getQuery().getFirstResult();
 if ( !(max>0) && !(firstRow>0) ){
 super.printSQLSelectStatement(call, printer,statement);
 return;
 } else {
 statement.setUseUniqueFieldAliases(true);
 ExpressionBuilder builder = new ExpressionBuilder();
 statement.addField(builder.getField("COUNTER() AS CNTR"));
 printer.printString("SELECT * FROM (");
 call.setFields(statement.printSQL(printer));
 printer.printString(") AS R WHERE R.CNTR >= ");
 printer.printParameter(DatabaseCall.FIRSTRESULT_FIELD);
 if ( max > 0 ){
 // Use of binding parameters is not allowed here, so use
 // String concatenation instead...
 printer.printString(" FETCH FIRST " + max + " ROWS ONLY");
 call.setIgnoreFirstRowMaxResultsSettings(true);
 public boolean wasFailureCommunicationBased(SQLException exception, Connection connection, AbstractSession sessionForProfile){
 if (connection == null || this.pingSQL == null){
 //Without a connection we are unable to determine what caused the error so return false.
 //The only case where connection will be null should be External Connection Pooling so
 //returning false is ok as there is no connection management requirement
 //If there is no ping sql then we can not perform the ping.
 return false;
 PreparedStatement statement = null;
 try{
 sessionForProfile.startOperationProfile(SessionProfiler.ConnectionPing);
 if (sessionForProfile.shouldLog(SessionLog.FINE, SessionLog.SQL)) {// Avoid printing if no logging required.
 sessionForProfile.log(SessionLog.FINE, SessionLog.SQL, getPingSQL(), (Object[])null, null, false);
 statement = connection.prepareStatement(getPingSQL());
 ResultSet result = statement.executeQuery();
 result.close();
 statement.close();
 }catch (SQLException ex){
 try{
 // Had to add this check because of NullPointerExceptions
 // (maybe a bug?)
 if(statement != null){
 //try to close statement again in case the query or result.close() caused an exception.
 statement.close();
 } catch (SQLException exception2) {
 //ignore;
 return true;
 }finally{
 sessionForProfile.endOperationProfile(SessionProfiler.ConnectionPing);
 return false;
}(As you can see, I had to override the <tt>wasFailureCommunicationBased()</tt> method as well, due to some unexpected NPE's. (A bug, perhaps?))
This code does work. However, the performance is not very well. The first page comes relatively fast, but as you browse further in the table, each page comes slower. I assume this is because the counter() method has to be evaluated for each row in the table.
I have to get the performance better and constant. Does anyone have an idea how to optimize this further?
Best regards,
Bart Kummel

LOve Firefox but it's annoying that if I'm using a search engine (I use lots of subscription legal search databases), when I press the back button all the data I entered in the search boxes has disappeared. I'm sure Firefox didn't use to do that?

Love Firefox but it's annoying that if I'm using a search engine (I use lots of subscription legal search databases), when I press the back button all the data I entered in the search boxes has disappeared. I'm sure Firefox didn't use to do that?

Please do the following. 
#Click the Firefox button, go to '''Options '''| '''Options''' | '''Privacy'''. 
#In the dropdown menu at the top, change it to "'''Use custom settings for history'''" 
#Checkmark the option: "'''Remember Search and Form history'''". 
#Remove the checkmark from: "'''Clear history when Firefox closes'''".

SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!

I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day!

How to search Database in JSP using LIKE

hi can anyone tell me is there any other syntax for Query when we use LIKE to search database in which suppose
String para = request.getParameter("name");
Select name,surname From user where name LIKE '"+para+"';

hi,
which database are you using, some require you to put % sign with like
e.g. select xyz from table abc where xyz like '%"+para+"%'

BO XI3.1: Support for Greenplum/PostGres Database

Is Support for GreenPlum /Postgres database schedule for next service pack of BO XI3.1?
With Postgres database - we have support only in Crystal and not in BO according to supported platform guide.
Could you please advise whether we have scheduled the support for GreenPlum/Postgres database for BOXI 3.1 - in the next release of BOXI 3.1 SP2 ?
Information from customer :
- for Postgres database with ODBC drivers are working ok.
- whether GreenPlum database is going to be supported in the next service pack
- whether Postgres JDBC drivers could be used to Connect to GreenPlum Database instead of Postgres ODBC Drivers.
Could you please advise on this database support as requested by customer ?
Regards,
Ganesh

Hi, I've experienced using Greenplum database and odbc PostsgreSQl
For BOE 3.1, you can create Webi, but not applicable with dashboard part. Where it cannot recognized the Postgre driver.
Currently i'm trying to use another driver from DataDirect.
Thats all for now.

How do I index a new search database?

I want to create a robot and run it against a URL and build an index( RDs), on my own defined search database. But only the default database get's indexed.
How do I point my Robot to my new defined search database?
Also I would like to be able to index a file system (a directory that contains only XML files). I have already created my filter specifying to allow any file with the extension .xml. but it doesn't seem to work? What do I need to do?
Thanks.

I think I understand what you are trying to do. I assume that you have created a new database from the admin console, and now you want to use the robot to index that database?
If that's the case you should be able to specify the database to populate, when defining a site for the robot to crawl. The option to set the database to populate is right at the bottom of the screen of the site editor, after the filter definitions and the advanced option.
Hope this helps.

When is Siri final version out and will it support UK business search?

When is Siri final version out and will it support UK business search?

Sorry, but we're all just fellow users here and have no information as to what Siri will offer in any given country at any point.
Regards.

Support Webinar - Troubleshooting Search Database Anomalies - Recorded

Similar Messages

Maybe you are looking for