Suppressing a prior Year Month Column on Cross Tab Report

I have two cross tab report in the footer that compares orders booked against what was shipped by month. I need to suppress the columns (Month) for the prior year but keep the Totals.
I have a pdf of the report

Try to add a formula as a column in the crosstab instead of a field. Create a formula like this
if year()=year(currentdate)-1 then
year()
else
month()
This works only for two years of data, means you need to have the record selection formula like this
year()>=year(currentdate)-1 and year()=year(currentdate)
Regards,
Raghavendra

Similar Messages

How to count number of columns in cross-tab report

I have created a cross-tab report and have managed to get the data out as below:
             Jan     Feb     Mar....(display of months will auto expand) Avg/Mo Total
UserA     4          3        4                                                                         11
UserB     6          1        1                                                                          8
UserC     5          5        5                                                                         15
Total       15        9        10                                                                        33
I want to insert a calculated column (Avg/Mo) into the cross-tab report based on the formula: Total/Number of Months. I used this calculation formula for Avg.Mo column:
(GridValueAt(CurrentRowIndex, CurrentColumnIndex+1, CurrentSummaryIndex)/GetNumColumns)
However, I get the wrong average since GetNumColumns count the total number of columns including the column of Avg/Mo and Total.
How do i get the number of columns, excluding the Avg/Mo calculated column and Total column?
PS: I can't use hardcode since the number of months/columns will auto expand the months progress...
Edited by: jutamind on May 26, 2010 9:27 AM

ok managed to solve this by slightly changing the formula:
GridValueAt(CurrentRowIndex, CurrentColumnIndex+1, CurrentSummaryIndex)/(GetNumColumns-2)

Dynamically color to each column in Cross-tab report

Hello All,
I am a newbie in Crystal report,from last few weeks, i am working on cross tab crystal report.i have a requirement to show color dynamically for each column.i am adding an attachment how i want it. i tried dynamic coloring using object field formula but it is showing red color to all data.i want red color data when in 2nd cross tab report data is beyond upper or lower limit in first cross tab table. it will be very helpful if somebody will give me any clue on this.... i read so many articles now it seem like impossible for me..:(
i am using visual studio 2010 and sap crystal report version 13.0.0.99 for visual studio 2010.

Hello Manish,
I have attached a sample report that does this. You will need to remove the .txt extension from the attached file to open it as an .rpt file.
Please right click on one of the value fields of the first cross tab in the report > Format Field > Common > Suppress if Duplicated conditional formula.
The nested formula is as follows;
numbervar array l;
numbervar array u;
numbervar x:=CurrentColumnIndex;
if GridRowColumnValue ('@limit') = 'lower limit' then
(redim preserve l[x];
l[x]:= tonumber(CurrentFieldValue))
else if GridRowColumnValue ('@limit') = 'upper limit' then
(redim preserve u[x];
u[x]:= tonumber(CurrentFieldValue));
false
So it assigns each lower and upper limit value for each client (in the sample it is country) to an array using the cross tabs column index to index the array and it ends in False as we don't actually want it to suppress if duplicated. This nested formula is just used to generate the arrays of upper and lower values.
In the second cross tab if you again right click on one of the value fields > Format Field > Font > Color you will see the following conditional formula;
numbervar array l;
numbervar array u;
numbervar x;
if not(tonumber(CurrentFieldValue) in l[CurrentColumnIndex] to u[CurrentColumnIndex]) then
crred
else
crblack
So this compaes the current field value to range generated by the 2 arrays and assigns a color based on whether or not it is in the range.
Regards,
Graham

How to Add new column in cross tab reports

I am using crystal reports 10
I created cross tab report for monthly sales. I need to add one more column in that report
ex:
Month   Customer    Part1 Part2    Part3
Jan         A               10       12         15
Jan         B                20      0           10
Jan         C               0         3           5
Feb        A               5         10          8
Feb        D               55        23        33
In above data Parts are no limit, thatswhy i am taking cross tab report.
I am taking Month and Customer name as Rows,
Part Codes as Colums,
Quantiry as Total fields in cross tab Report.
Here month field is storing as Transaction date in database, I am calculating by month
I am getting upto this.
User needs add one more field is Invoice no
Month   Customer    Part1 Part2    Part3        Invoice no
Jan         A               10       12         15          B1,B2,B3,B4
Jan         B                20      0           10         B12,B30
Jan         C               0         3           5           B6
Feb        A               5         10          8           B35,B40
Feb        D               55        23        33          B25,B56
How to add invoice nos by group wise(By customer and By month)
Thank you.
Raja shekar Reddy K.
Edited by: Raja shekhar Reddy on Apr 16, 2009 5:10 PM

Dear Amogh,
Thanks for u'r Replay.
If i use new crosstab for Invoice no each invoice number can display like seperate columns.
But I need Invoice no in single column with seperate with "," or "/".
Thanks & regards,
Raja Shekar Reddy K.

Limiting Columns in Cross Tab reports

Plz tell me how to limit columns in Cross Tab.I have many columns which go on and even are not visible for Scroll and neither in another page
Plz help.

Check if http://winrichman.blogspot.com/2009/05/cross-tab-by-limiting-number-of-colums.html is helpful

More than one summary column in cross tab reports

Hi,
I have a cross tab report. The summary column is SUM. I want to add another summary column next to SUM which will be AVG(Average) column.
Any ideas?
Please see the attached image.
Thanks,

hi Anurag,
my fault...i should have looked closer at your data.
here's the easy way of showing two sets of summaries at the end of a crosstab, without having duplicate columns.
1) copy your existing cross-tab and paste it to the right of your current cross-tab.
2) now go to the cross-tab expert of the new cross-tab and remove the fields from the Column dialogue
3) change the summary to an Average
4) exit the cross-tab expert and go to the Section Expert for the section where both cross-tabs are...ensure that you check Relative Positions
preview the report. now you'll have to move the 2nd cross-tab a bit so that it aligns properly with the first one.
as a sample, see the attached report. extract the contents and change the .txt extension to .rpt.
-jamie

Hide Column in Cross Tab Report

Hi guys,
I have an issue with the Cross Tab in CR2008.
I'm using 2 columns to calculate an other column, but these 2 columns should not be displayed in the report.
I tried to suppress the column but it still shows a white space.
I tried to change the column width, but it cant get it smaller then 0,113.
Can anyone tell me how to set the column width smaller using a formula or how to suppress the whole column.
Thanks in advance.
William

Hi William,
Instead of using all 3 columns in the crosstab, just drop your main columnn on.
In the Design window, not the Crosstab Experrt, right-click the summary field and select Format Field.
In the Common Tab, open the formula for Display String.
Now you can take the value of your summary using the CurrentFieldValue and make your total. You may need to summarize the supporting numbers to calculate properly but it should work here properly.
I've used this for things like running totals and repeating values between rows.
NOTE: This formula only returns a string so make sure you format your final value as a string.
Good luck,
Brian

Cross tab report-dyanamic columns for months and quarterly sum

Hi all,
I work on report creation in BI Publisher.I need to display values in a cross tab report in a way that it shows data for 3 months and then a column for its quarterly sum.
For ex:-
Market --Jan Feb Mar Q1_sum Apr May Jun Q2_sum ---------------like wise for n months
Market1 100 --80 --30 -- 210 --10 -- 80 --90 --210
Market2 120 --90 --40 --250 --100 --70 --30 --200
Market3 130 --70 --60 --260 --140 -- 0 --40 --180 ('--' just to maintain indentation)
The values of number of months( date range) and the names of market are derived dyanamically .
The code from my sql query presently shows months-range (Jan ,feb,mar..), Quarterly sum to be displayed, Market names etc as child elements in multiple occurences main Query set.
<Main Query>
<Market>abc</Market>
<Region>abc</Region>
<Months-Range>abc</Months-Range>
<Quarterly_sum>abc</Quarterly_sum>
<Main Query>
<Main Query>
</Main Query>
Please guide me on code in rtf template for the same.
Thanks
Edited by: user9061488 on Jul 13, 2010 1:32 AM
Edited by: user9061488 on Jul 13, 2010 3:48 AM

Hi,
Do u have time dim in your metadata??
If not,
Create a time dimension year,quater,month,day
http://lh4.ggpht.com/_rhCtHYLiamQ/S7PQvxYBbzI/AAAAAAABZXI/ef_Ur9AmyUo/s800/04_year_quarter_bmm.jpg
After that in fact table by using the (ago/todate) function ....pull the respective columns to pivot table columns section(date column) and measures col in measures section and enable the grand total in columns section so that it will show grand total for every quarter
thanks,
saichand.v

Cross tab report's -one column display total counts of previous financial year, one column current financial year

Hi
I'm using CR XI. I'm attempting to create a cross-tab report where:
           Added       Total
AF         12            23
F            15           30
CO         18           50
Where AF etc is the categoty of items, Added is the total count of previous finanical year(e.g. 1 July 2006 to 30 June 2007), Total is the total account of current finanical year.
The count is based on created_date field(e.g. ITD.DTE -- ITD is the table, DTE is the field).
Although I can at the moment only display the value correctly in "Added" column, if I tried to display the Total column, the two columns always have the same value.
How could I achieve the above desired results by using fomula? I would appreciate it very much if anyone could help me with this?
Thanks in advance
JS

Create 2 formulas, 1 for the previous year and 1 for current, similar to the following;
1) if date({Orders.Order Date}) in date(2003,07,01) to date(2004,06,30) then 1 else 0
2) if date({Orders.Order Date}) in date(2004,07,01) to date(2005,06,30) then 1 else 0
Add both of these formulas as the summarized fields in the crosstab

Re: Suppression Code in Cross tab Report

Hi All,
I am working with a cross tab report which has location descriptions as rows and dates as columns and the revenues as the summarized field.
Now I have over 7 locations without revenues and I need only 3 of them for suppose 'LOC X' 'LOC Y' 'LOC Z' to be suppressed.
How can i Suppress only those 3 locations.
Can any one help me with code please.
Thanks In Advance,
Nani

Nani
Can you use the "Suppress empty Rows" from the Customize Style tab in the CrossTab Expert?
Also, if your datasource is a Stored Procedure, you can filter them out there.
Edited by: Marty Reyes on Jan 3, 2011 10:52 PM

Sorting by date in columns cross tab report.

Hi all,
I am working on a cross tab report in BI Publisher in which columns are generated dynamically in a pivot table depicting months as Jan 09 , Feb 09.... but data type is char.When displayed in pdf, columns are generated sorted alphabetically.
How can I have them sorted by date in final pdf?
or
How can I stop the columns being sorted in pivot table at template level?
Thanks.
Edited by: user9061488 on Jul 21, 2010 1:13 AM

You need to get a extra column in the query just for sorting purpose, which will have month number in it or YYYYMMDD. format, so that , it can be used in only for sorting.
with JAN 09, FEB 09 , we can do it, but it will be little complex

Multiple columns in Cross Tab

Hello All,
Can anyone suggest me how can i create a cross tab report that has multiple fields in columns and multiple fields in summary?
I have 10 formulae for the columns and 10 for the summary. But if I add more than one in columns or it gives some extended report which i want to avaoid. How can i get a normal cross tab report.
Thanks
Robinn

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Unable to get cells for the columns which have no data in cross-tab report

Hi friends,
I am developing a cross-tab report.
Let's take an example to explain the problem.
Here is the XML file i am using
<?xml version="1.0" ?>
- 
- <MODULE1>
- <LIST_G_SCHEMECODE>
- <G_SCHEMECODE>
<SCHEMECODE>171091</SCHEMECODE>
<AMOUNT>0</AMOUNT>
<ASSET_TYPE>Govt Guarantee</ASSET_TYPE>
<MARGIN>0</MARGIN>
<AMOUNT_SECURED>0</AMOUNT_SECURED>
<VALUE_OF_SECURITY>0</VALUE_OF_SECURITY>
</G_SCHEMECODE>
- <G_SCHEMECODE>
<SCHEMECODE>171091</SCHEMECODE>
<AMOUNT>0</AMOUNT>
<ASSET_TYPE>Loans To Govt</ASSET_TYPE>
<MARGIN>0</MARGIN>
<AMOUNT_SECURED>0</AMOUNT_SECURED>
<VALUE_OF_SECURITY>0</VALUE_OF_SECURITY>
</G_SCHEMECODE>
- <G_SCHEMECODE>
<SCHEMECODE>171093</SCHEMECODE>
<AMOUNT>0</AMOUNT>
<ASSET_TYPE>Govt Guarantee</ASSET_TYPE>
<MARGIN>120</MARGIN>
<AMOUNT_SECURED>0</AMOUNT_SECURED>
<VALUE_OF_SECURITY>0</VALUE_OF_SECURITY>
</G_SCHEMECODE>
- <G_SCHEMECODE>
<SCHEMECODE>171093</SCHEMECODE>
<AMOUNT>0</AMOUNT>
<ASSET_TYPE>Loans To Govt</ASSET_TYPE>
<MARGIN>0</MARGIN>
<AMOUNT_SECURED>0</AMOUNT_SECURED>
<VALUE_OF_SECURITY>0</VALUE_OF_SECURITY>
</G_SCHEMECODE>
- <G_SCHEMECODE>
<SCHEMECODE>*171095*</SCHEMECODE>
<AMOUNT>0</AMOUNT>
<ASSET_TYPE>Govt Guarantee</ASSET_TYPE>
<MARGIN>100</MARGIN>
<AMOUNT_SECURED>0</AMOUNT_SECURED>
<VALUE_OF_SECURITY>0</VALUE_OF_SECURITY>
</G_SCHEMECODE>
</LIST_G_SCHEMECODE>
</MODULE1>Now I want SCHEMECODE in rows and ASSET_TYPE in columns.
And the each ASSET_TYPE column is to be divided into 2 sub-columns (MARGIN,AMOUNT_SECURED).
I am able to achevie this.
The problem is that ,for the schemecode 171095, since there is no data for ASSET_TYPE "Loans To Govt",no cells are generated for this SCHEMECODE and ASSET TYPE.
But the requirement is to generate blank cells.
If needed i will send the template at xml files also.

try this, there must be simpler one i guess...
1. take a form field, and make its type as number. Paste the below one <?xdoxslt:set_variable($_XDOCTX,'v1',2)?>
2. now take a table with as below,
A l B |
C l D1 l D2 l E1 l E2 l
observe that i. A, C are in one column
ii. cell B is on top of D1, D2
iii. we have no cell on top of E1 and E2 cells
iv. 'l' represents the wall of the cell :)
A: <?horizontal-break-table:1?> SCHEMECODE
B: <?for-each-group@column:G_SCHEMECODE;ASSET_TYPE?> <?ASSET_TYPE?> <?end for-each?>
C: <?for-each-group:G_SCHEMECODE;SCHEMECODE?> <?xdoxslt:set_variable($_XDOCTX,'v1',2)?> <?SCHEMECODE?>
D1: <?for-each-group@cell:current-group();ASSET_TYPE?> <?MARGIN?> <?xdoxslt:set_variable($_XDOCTX,'v1',xdoxslt:get_variable($_XDOCTX,'v1')-1)?>
D2: <?AMOUNT_SECURED?> <?end for-each?> <?end for-each?>
E1: <?for-each@column:xdoxslt:foreach_number($_XDOCTX,1,xdoxslt:get_variable($_XDOCTX,'v1'),1)?>
E2: <?END FOR-EACH?>
3. If you are confused gimme your email id, i will pass the template. But you should add credits to me.. :)

Sub-Summarizing columns in Cross Tab

Post Author: valkyriexp
CA Forum: General
Hi,
I'm fairly new in using CR, I wonder if anyone could help me.
I have a cross tab report of projects in rows, activities in columns and hours in table, i need to insert few new columns that have the sum of hours of the selected activities. Is that possible without breaking the report into sub-reports?
some thing like
                  Act1         Act2      Sum1&2     Act3      Act4      Act5      Sum3&4&5   .....
Proj1             1             1              2              4            2           1              7
Proj2             2             1             3               1            0           0              1
thanks for the help

Post Author: valkyriexp
CA Forum: General
After spending half a day i was able add a new field to each column to does the job, small piece of macro is doing the summation, now i have the problem to set the width of empty fields to zero, can anyone help?
WhileReadingRecords;global NumberVar sumnum;global StringVar OutStr;
if {jobs.acts}="Act1" or {jobs.acts}="Act3" then     sumnum:={jobs.hour}else if {jobs.acts}="Act2" or {jobs.acts}="Act4" or {jobs.acts}="Act5" or ... then    sumnum:=sumnum+{jobs.hour}else    sumnum:=0;
if {jobs.acts}="Act2" or {jobs.acts}="Act5" then    OutStr:=cstr(sumnum);else    OutStr:="";
the result would be like the following table, now i need to set the width of empty fields to zero:
                  Act1         Act2             Act3      Act4      Act5        .....
Proj1             1            1      2           4            2          1     7
Proj2             2            1      3           1            0          0     1

Add ratio column in Cross Tab

Hi Expert!
I am young of Crystal Report. I have some problems with using cross tab report.
Rows: hour/Floor, Columns: Floor, Summarized Field: Sales
I want to show the result as below:
hour/Floor_____________ Floor1___________Floor2__________Total________Ratio
7h-10h _____________ $500 ___________ $1000 __________$ 1500______75%
10h-13h_______________$200 ___________$300___________$500________ 25%
Total__________________$700___________$1300__________ $2000________100%
I want to add Ratio to show on the right after Total Column.
Can I do like this or not? Or Is there another way to do that with the same result?
Regards,

This post looks remarkedly like [Add Column to Cross-tab in Crystal Report|Add Column to Cross-tab in Crystal Report;
Please see it for my replies.
Debi

Suppressing a prior Year Month Column on Cross Tab Report

Similar Messages

Maybe you are looking for