SUS not starting

SUS not starting.
GUI says "Can not connect to Apple"
Log says "We failed to check in with Apple"
Server is bypassing proxy and allowed through firewall. All server software updates ran fine. I can connect to the internet.
I have tried everything to my knowledge. I have re-installed twice with no luck.
Has anyone ran into this issue.
Thanks

Jeff..
Use Lion Recovery

Similar Messages

Server does not start using Sun Java SE 1.5.0_07

The application server launched with startserv using Sun Java SE 1.5.0_07 , seems to hang (uyner SuSE Linx 10.1), it does not start, and stays forever in startserv. performing a kill -3 for the precess we have:
"process reaper" daemon prio=1 tid=0x08459ab8 nid=0x1bc8 runnable [0xa8c01000..0xa8c01e50]
at java.lang.UNIXProcess.waitForProcessExit(Native Method)
at java.lang.UNIXProcess.access$900(UNIXProcess.java:20)
at java.lang.UNIXProcess$1$1.run(UNIXProcess.java:132)
"Low Memory Detector" daemon prio=1 tid=0x080c7720 nid=0x1bc6 runnable [0x00000000..0x00000000]
"CompilerThread0" daemon prio=1 tid=0x080c6178 nid=0x1bc5 waiting on condition [0x00000000..0xaa2c09b8]
"Signal Dispatcher" daemon prio=1 tid=0x080c5100 nid=0x1bc4 runnable [0x00000000..0x00000000]
"Finalizer" daemon prio=1 tid=0x080b9b88 nid=0x1bc3 in Object.wait() [0xaa3fc000..0xaa3fd0d0]
at java.lang.Object.wait(Native Method)
- waiting on <0xaaa77568> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0xaaa77568> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=1 tid=0x080b8e38 nid=0x1bc2 in Object.wait() [0xaa47e000..0xaa47e150]
at java.lang.Object.wait(Native Method)
- waiting on <0xaaa775e8> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:474)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0xaaa775e8> (a java.lang.ref.Reference$Lock)
"main" prio=1 tid=0x0805d5f8 nid=0x1bc0 runnable [0xbfb3a000..0xbfb3b2d8]
at java.io.FileInputStream.readBytes(Native Method)
at java.io.FileInputStream.read(FileInputStream.java:194)
at java.io.BufferedInputStream.read1(BufferedInputStream.java:254)
at java.io.BufferedInputStream.read(BufferedInputStream.java:313)
- locked <0xaaa79d20> (a java.io.BufferedInputStream)
at sun.nio.cs.StreamDecoder$CharsetSD.readBytes(StreamDecoder.java:411)
at sun.nio.cs.StreamDecoder$CharsetSD.implRead(StreamDecoder.java:453)
at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:183)
- locked <0xaa591480> (a java.io.InputStreamReader)
at java.io.InputStreamReader.read(InputStreamReader.java:167)
at java.io.BufferedReader.fill(BufferedReader.java:136)
at java.io.BufferedReader.readLine(BufferedReader.java:299)
- locked <0xaa591480> (a java.io.InputStreamReader)
at java.io.BufferedReader.readLine(BufferedReader.java:362)
at com.sun.enterprise.tools.launcher.ProcessLauncher.sendInputToProcessInput(ProcessLauncher.java:410)
at com.sun.enterprise.tools.launcher.ProcessLauncher.executeBackgroundCommand(ProcessLauncher.java:352)
at com.sun.enterprise.tools.launcher.ProcessLauncher.executeCommand(ProcessLauncher.java:327)
at com.sun.enterprise.tools.launcher.ProcessLauncher.process(ProcessLauncher.java:238)
at com.sun.enterprise.tools.launcher.ProcessLauncher.main(ProcessLauncher.java:158)
"VM Thread" prio=1 tid=0x080b61b0 nid=0x1bc1 runnable
"VM Periodic Task Thread" prio=1 tid=0x080c8bd8 nid=0x1bc7 waiting on condition

The recommended way of starting the application server is to use asadmin command, for ex. <application-server-install-root>/bin/asadmin start-domain. The reason startserv hangs is because it is expecting some input which is automatically provided by the asadmin command.
- sreeni

Suse11.2 SAP ERP6 INSTALL ./sapinst do not start

hi guys
i have done jdk install and /etc/profile work. and ip and hostname in /etc/hosts, export DISPLAY=IP:0.0,xhost. all are done !
but still ./sapinst do not start!!!
Starting GUIServer using:
SAPinst port         : pipe:5:8
GUIServer port       : 21212
GUI autostart        : on
GUI mode             : normal
command       : /usr/java/j2sdk1.4.2_19/bin/java -Xmx256M -Dsap.env.var.javahome=SAPINST_JRE_HOME -cp /tmp/sapinst_exe.20600.1392479296/JAR/instgui.jar SDTServer rootdir=/root/.sdtgui config=jar:sdtserver.xml guiport=21212 httpport=4239 -nolock -srvarg=/SAPinstService/host=127.0.0.1 -srvarg=/SAPinstService/port=pipe:5:8
load resource pool /sapinst/resourcepool.xml
guiengine: No GUI server connected; waiting for a connection on host linux-0sa1, port 21212 to continue with the installation
The process that should run the SAPinst GUI could not be started. Please make sure that a JDK is installed on this host and that SAPINST_JRE_HOME points to the root directory of your Java installation. As an alternative you may start the GUI on another host (for details please consult the installation guide).
Java has been started with the following command line:
-Xmx256M -Dsap.env.var.javahome=SAPINST_JRE_HOME -cp /tmp/sapinst_exe.20600.1392479296/JAR/instgui.jar SDTServer rootdir=/root/.sdtgui config=jar:sdtserver.xml guiport=21212 httpport=4239 -nolock -srvarg=/SAPinstService/host=127.0.0.1 -srvarg=/SAPinstService/port=pipe:5:8

Dear Beny,
Already SUSI Linux having JAVA.
Please check echo $SAPINST_JRE_HOME
above path which java binaries located and if required set this environment to correct java version as per installation guide and also check $PATH...
Thanks & Regards,
V Srinivasan

Sun App Server 8.1 and 8.2 could not start

Hi friends, thank for various suggestions. pls i'm having problem with Sun App Server 8.1 and 8.2. I installed Portal 7 on Red Hat Enterprise Linux 3 and also Sun Portal 6 on Suse Linux 9. The problem is that App server keep giving Login exception after using them for a while. The details is given below:
after typing ./asadmin start-domain --user admin domain1. Instead of it to give me the password prompt, it threw the following exception:
INFO: SEC5046: Audit: Authentication refused for [admin]
Login Failed javax.security. auth.login.LoginException: Failed file for login admin
CL1156 could not start the domain domain1.
I always login to the O/S as root.
Any suggestion will be highly appreciated. Thanks

Thanks very much kedar.mhaswade for your suggestions.
I do not have a regular access to the Internet, I
would have gotten back earlier than this, so i'm
sorry. Anyway, i checked the content of
~/.asadminprefs and the password is not the same with
the one i'm using. I found the default password
supplied by Sun but I don't think this could be the
problem. I'm actually using the App server that is
bundled with Sun Portal 6 and 7 and so i supplied my
own password during installation and i've logged in
several times after installation. It just failed in
one of those logins and had stopped working since. I
always encountered the same problem either when using
Sun Portal 7 or 6 on Red Hat ES 3 and Suse 9
respectively.
I'm posting the content of admin-keyfile as you
requested:
admin;{SSHA}Qf/m4KEBDPojsP1mkjywE5XZA6SPh7i8WQmV/A==;a
sadmin
# Domain User and Password - Do Not Delete Entry
Above
So i will so much appreciate your help and i wouldn't
mind if you could send me your phone number. Thanks.Hi tolulike,
Even if you supplied your own password, we have this developer friendly
feature that has side effects that are at times hard to diagnose. Can you
please
- rename the .asadminprefs file and make sure that there is no .asadminprefs file in your home directory?
- attempt to start the domain.
You should be prompted for the password.
The idea is that when you've got that file and that entry AS_ADMIN_PASSWORD in your home directory, asadmin will read it
from there and you land in this (unfortunate) situation.
Obviously doing this might have some side effects with other domains. This
is because for all domains, asadmin reads this file as a last resort. So,
it might so happen that this file is actually required for functioning of your
other domains.
But now you know when this file is used, so there is no mystery (hopefully).
Let me know if this works.
Thank you.
Kedar

Ohasd not starting after fresh install

Hi,
I have installed Oracle Database 11g Release 11.2.0.1.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options on SUSE Linux Enterprise Server 11 (x86_64) 11.0.
After installation all cluster and resources were up, I could log in to database. I have restarted orcl1 node, and after boot the ohasd service is not started. Same is with orcl0 node. When I start manually, the cluster comes up. See below:
grid@orcl1:~> crsctl check has
CRS-4639: Could not contact Oracle High Availability Services
orcl1:~ # ps aux | grep ohasd
root      5157 0.0 0.0 11224 1448 ?        Ss   03:02   0:00 /bin/sh /etc/init.d/init.ohasd run
root      5365 0.0 0.0   4316   756 pts/0    S+   03:02   0:00 grep ohasd
orcl1:~ # chkconfig ohasd
ohasd on
orcl1:~ # service ohasd start
Starting ohasd:
orcl1:~ #
orcl1:~ # CRS-4123: Oracle High Availability Services has been started.
orcl1:~ # ps aux | grep ohasd
root      5157 0.0 0.0 11224 1464 ?        Ss   03:02   0:00 /bin/sh /etc/init.d/init.ohasd run
root      5414 3.3 0.3 569056 47124 ?        Ssl 03:03   0:01 /u01/app/11.2.0/grid/bin/ohasd.bin reboot
root      5736 0.0 0.0   4316   752 pts/0    S+   03:03   0:00 grep ohasdThen within short time everything is started up...
Anyone has idea why ohasd service is not started automatically ?
Update:
I have changed /etc/init.d/ohasd file so that it 'logs' to /tmp time when invoked (see below the code). After reboot there is no record of startup /tmp/ohasd*
orcl1:~ # chkconfig --list ohasd
ohasd                     0:off 1:off 2:off 3:on   4:off 5:on   6:off
# This script is invoked by the rc system.
/bin/touch /tmp/ohasd.start."`date`"    # <<<--- added line to 'log' the start
ORA_CRS_HOME=/u01/app/11.2.0/gridThanks !
Edited by: kamilp on Feb 17, 2013 11:35 PM

Hi,
there are two scripts - both installed by installer, I have not changed anything...
orcl1:~ # l /etc/init.d/*ohasd*
-rwxr-xr-x 1 root root 3079 Feb 18 00:37 /etc/init.d/init.ohasd*
-rwxr-xr-x 1 root root 2632 Feb 18 11:27 /etc/init.d/ohasd*
orcl1:~ # l /etc/init.d/rc5.d/*ohasd*
lrwxrwxrwx 1 root root 17 Feb 18 00:37 /etc/init.d/rc5.d/S96ohasd -> /etc/init.d/ohasd*
orcl1:~ # head -10 /etc/init.d/ohasd
#!/bin/sh
# Copyright (c) 2001, 2009, Oracle and/or its affiliates. All rights reserved.
# ohasd.sbs - Control script for the Oracle HA Services daemon
# This script is invoked by the rc system.
ORA_CRS_HOME=/u01/app/11.2.0/grid
orcl1:~ # head -10 /etc/init.d/init.ohasd
#!/bin/sh
# Copyright (c) 2001, 2009, Oracle and/or its affiliates. All rights reserved.
# init.ohasd - Control script for the Oracle HA services daemon
# This script is invoked by the init system

SAP not starting after crash: Terminateing With error code 12

Hi,
After system crash SAP is not starting normally. When running startsap under SIDadm puts out: /usr/sap/TST/SYS/exe/run/startdb: Terminateing With error code 12
startdb.log shows that:
/oracle/TST/102_64/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shares object file: No such file or directory
I have checked - file and directory are present.
However - when manually starting DB under oraSID and then logging in as SIDadm and starting SAP - everything starts normally.
(Allthough SID is has been changed before - system also worked normally after SID change) I have checked userrights and groups , also profile - everything seems to be normal. Any ideas?
Edited by: Kristjan T on Mar 16, 2011 1:16 PM

Hi,
1.what UNIX Flavor are we talking about -> SuSe
2.What SAP Kernel Release is in place (may be 6.40 non EX2 ?) -> 6.40
3.What release is the DB suposed to have? -> 10.2.0.2.0 - 64bit Prod
4.I see, you are calling an sqlplus from a 10.2 ORACLE_HOME.
Is that the correct HOME the DB is running with ? -> Yes
5.Can you start the DB with
brconnect -c -u / -f dbstart -> NO
Error is:
:devadm 51> brconnect -c -u / -f dbstart
BR0801I BRCONNECT 7.00 (40)
oracleDEV: error while loading shared libraries: libskgxp10.so: cannot open shared object file: No such file or directory
BR0278E Command output of '/oracle/DEV/102_64/bin/sqlplus /nolog':
/oracle/DEV/102_64/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shared object file: No such file or directory
BR0280I BRCONNECT time stamp: 2011-05-05 15.01.17
BR0279E Return code from '/oracle/DEV/102_64/bin/sqlplus /nolog': 127
BR0302E SQLPLUS call for database instance DEV failed
BR0303E Determination of Oracle version failed
BR0280I BRCONNECT time stamp: 2011-05-05 15.01.17
BR0804I BRCONNECT terminated with errors
(Different machine but same situation)
6.As already requested, what is the output of:
6.1.ldd sqlplus
:devadm 55> ldd sqlplus
ldd: ./sqlplus: No such file or directory
in addition:
6.2. env | grep -i ora
devadm 56> env | grep -i ora
PATH=/oracle/DEV/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/home/devadm:/usr/sap/DEV/SYS/exe/run:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/devadm/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/bin/X11:/usr/lib/mit/bin:/usr/lib/mit/sbin
LD_LIBRARY_PATH=/usr/sap/DEV/SYS/exe/run:/oracle/client/10x_64/instantclient
dbms_type=ORA
dbs_ora_tnsname=DEV
dbs_ora_schema=SAPSR3
ORACLE_SID=DEV
ORACLE_BASE=/oracle
TNS_ADMIN=/usr/sap/DEV/SYS/profile/oracle
ORACLE_HOME=/oracle/DEV/102_64
SAPDATA_HOME=/oracle/DEV
6.3 env | grep -i nls
:devadm 57> env | grep -i nls
XNLSPATH=/usr/X11R6/lib/X11/nls
NLS_LANG=AMERICAN_AMERICA.UTF8
6.4 env | grep -i lib
devadm 58> env | grep -i lib
PATH=/oracle/DEV/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/home/devadm:/usr/sap/DEV/SYS/exe/run:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/devadm/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/bin/X11:/usr/lib/mit/bin:/usr/lib/mit/sbin
XKEYSYMDB=/usr/X11R6/lib/X11/XKeysymDB
XNLSPATH=/usr/X11R6/lib/X11/nls
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/local/share/pkgconfig:/usr/lib64/pkgconfig:/usr/share/pkgconfig:/opt/kde3/lib64/pkgconfig:/opt/gnome/lib64/pkgconfig:/opt/gnome/lib64/pkgconfig:/opt/gnome/share/pkgconfig
GTK_PATH=/usr/local/lib/gtk-2.0:/opt/gnome/lib/gtk-2.0:/usr/lib/gtk-2.0
GTK_PATH64=/usr/local/lib64/gtk-2.0:/opt/gnome/lib64/gtk-2.0:/usr/lib64/gtk-2.0
DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
LD_LIBRARY_PATH=/usr/sap/DEV/SYS/exe/run:/oracle/client/10x_64/instantclient
Any ideas???
Br,
Kristjan T.

HTTP Server not starting in SOA Suite for linux

Hi all,
Installation and configuration of the new SOA Suite on SUSE 9 is not without faults. During the configuration the HTTP Server process is not starting. According the log file (opmn/logs/HTTP_Server~1.log) the HTTP Server is trying to start in SSL-mode, but I guess the SSL was not properly configured during the installation by the installer. I am not able to configure SSL myself, so my workaround was to disable SSL in the opmn.xml configuration file.
Is anyone experiencing these problems? How can I configure SSL? Is SSL supposed to be enabled on the soa-server?
Thanks in advance,
Harm
PS. The type of installation = advanced install, full
Message was edited by: Harm

Hi,
First shutdown iAS, then edit the opmn.xml and restart.
Original opmn.xml fragment:
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
Edited opmn.xml fragment:
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-disabled"/>
Kind regards,
H

Azure VM not starting

Hi,
I have created a new VM and cloud service with Reserved IP. But the VM does not start and says:
Could not start virtual machine "VM Name" in cloud service "Cloud Service Name".
and in cloud service it says:
Running
Not all role instances are ready.
1 Instance: 1 Stopped (Could not start)
I have not configured the Azure Service Configuration Schema (.cscfg File) as I dont know where to find it. IS it required?

Hi,
There is no need to configure the .cscfg file when you reserve a public IP address to create a new VM. Is it a new cloud service that the VM in?
I recommend you to use the Azure PowerShell cmdlet below or restart the VM in the Azure management portal:
Start-AzureVM -ServiceName xxx -Name xxx
If you recieved any error message, please feedback to us.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Could not start instance service of Instance - Solman 7.1 & Sybase

Dear All,
Greetings!!
We are in the process of installing Solman 7.1 with Sybase ASE 15.7 on SUSE Linux 11 SP03. During phase 50 we are getting an error like "Could not start instance service of Instance". I have attached the Error and the Inst_Dev.log screenshot for your reference.
Please help us with some suggestion or solution at the earliest.
Thanks,
Ela

Hi Chatur,
Thanks for your reply. The issue had been resolved.
Yes, /usr/sap/ASM/ASCS/exe was empty actually & we copied the Kernel files to this directory & retired again & its working fine now.
Thanks again.
Regards,
Ela

Deployment SDM could not start the J2EE Cluster on the host nw4host

Hello,
I installed the WAS testdrive on Linux SUSE 9.3 and the SNDS on WinXP.
I am trying to deploy the welcome application from the SNDS and get the following error message:
SDM could not start the J2ee Cluster on the host nw4host! The online deployment is terminated. JStartup Framework ist not able to deliver an information about the cluster control instances! Please check the status of the J2EE Engine.
I can start the J2EE Start page on port 50000, the system info shows that dispatcher, server0 and SDM are running. I can start the visual admin with go, the SDM with RemoteGui and the DeployTool.
The comand startsap check nw4host shows, everythings running:
nw4host:nw4adm 54> startsap check nw4host
Checking ADA db Database
ABAP Database is running
Checking ADA db Database
J2EE Database is running
See logfile JdbcCon.log
Checking SAP NW4 Instance SCS01
Instance SCS01 is running
Checking SAP NW4 Instance DVEBMGS00
Instance DVEBMGS00 is running
Logging in to SAP with the Java Gui, the ICM says:
ABAP Server operational        = TRUE
J2EE Server configured         = FALSE
J2EE HTTP port                 = 50000
J2EE HTTPS port                = 50001
J2EE Server operational        = TRUE
Default root access handler    = ABAP
URL Prefix Table loaded        = TRUE
Any idea where the problem could be ?
Thanks, Manfred.

changed the ip address for nw4host in etc/hosts to the real ip address of the server where application runs

NW4: SDM could not start the J2EE cluster on the host nw4host

Hello,
in NW4 i get this error when i try to deploy the welcome webdynpro:
SDM could not start the J2EE cluster on the host nw4host! The online deployment is terminated. JStartup Framework is not able to deliver an information about the cluster control instances! Please check the status of the J2EE Engine.
I am using NW4 (built 28.9.04) on Suse 9.0 and the corresponding IDE (2.04) on Windows 2000.
In the J2EE view of the IDE everything (SDM, Dispatcher and Server) is green. I can start the examples on port 50000. According to systeminfo everything is running.
I searched in OSS and found Note 738402. But there is no EOF in the SDM-logfile. And when i started the J2EE-Configtool the value for "admin/host/SID" is not localhost.
Any hints?
Regards,
Nico.

Hello,
> Developer Studio -> Preferences -> SAP J2EE Engine ?
of course. Every icon (SDM, Dispatcher and server) is green in the J22E-View of the IDE. I still get this error message.
Regards,
Nico.

Ligthroom 5.5 after installing the software does not start and does not give any kind of mistake

I subscribe to CC as a photographer and just inatalar Ligthroom but this does not start and no daningun mistake. Reinstall several times but still the same. What can be the problem?
thanks

Hola, arreglado por mi parte también, chateando (en inglés...) con un operador que ha demostrado conocer perfectamente la solución (para Win7):
En carpetas "C:\Program files (x86)\Common Files\Adobe\" y "C:\ProgramData\Adobe\" deben activarse permisos de control total para el usuario (que puede no tener control total en el sistema) y desactivar "solo lectura" a las carpetas descritas y sus subcarpetas para que al iniciar se configure el registro adecuadamente. Una vez hecho esto me ha funcionado todo a la primera, me lo han explicado paso a paso por el chat. Un 10 para el técnico, un suspenso para Adobe por no publicar adecuadamente la solución.
Gracias manufoto por tu explicación, parece que todo va a parar a las mismas carpetas.
Saludos

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Error "can not start the configuration in parallel does not correct"

Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!

Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

Can not start data Collection service

I have installed Fabric Manager version 3.3.(4). In the Performance Web Client I can not start the service Data Collection is in starting forever.
I also could not stop it. I rebooted the server and the status for this service is in starting.
Thanks,

Please provide more details like: Server OS, Java version, and what type of database you are using for the FM Server. Have you considered using a newer version of FM Server?

SUS not starting

Similar Messages

Maybe you are looking for