SV Assistant Log File :: "Invalid Sampling Frequency" Error
I've been trying my best to like the SV Assistant, but so far, I'm not finding it very friendly.
I'm ade a few measurements, and saved them as LOG files. Since I've also been having issues with the SVAssistant locking up and corrupting my project, so I've decided to save the project in another (i.e. network) folder. Now, when I copy the file(.seproj) back to my working folder, I get an error stating that the log file has "Invalid Sampling Frequency".
Any ideas on what my issue might be?
John Skurka
Staff Engineer - NVH
BorgWarner MorseTEC
Hi John,
Have you tried to repair Signal Express? If not, go to Control Panel>> Uninstall a program>> National Instruments Software>> Signal Express. There should be three buttons on the right hand side. Click Repair.
Here is a document which also walks you through the steps:
http://digital.ni.com/public.nsf/allkb/AC6ED75D3D93375686256E8E00245F0D?OpenDocument
Sunaina K.
Product Manager
Embedded Systems
Similar Messages
-
Hello
When I try to start the SQl server service i get the following error:
Event id 17058
Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).
As a test I have made sure the errorlog file ,and the entire drive it is, has everyone full control permissions, but to no avail. Does anyone have any ideas to resolve this issue?
Thank youHi,
Try running:
SELECT SERVERPROPERTY('ErrorLogFileName')
Then verify that the account being used to run the SQL Server service account has access to the path output above. If possible, you could try logging onto the server with the same account used to run SQL Server then navigate to the errorlog folder.
Thanks,
Andrew Bainbridge
SQL Server DBA
Please click "Propose As Answer" if a post solves your problem, or "Vote As Helpful" if a post has been useful to you -
Status of online redo log file INVALID warning appears during online backup
Hi All,
I have a peculiar problem in one of the SAP ECC 6.0 systems. The daily online backup is getting completed with warnings.
Please find below the warnings in DB12 logs:
BR0335W Status of online redo log file /oracle/AS0/mirrlogB/log_g18m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogB/log_g18m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g50_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g50_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogB/log_g51_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogB/log_g51_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g52_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g52_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g53_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g53_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g54_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g54_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g55_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g55_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g56_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g56_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogB/log_g57_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogB/log_g57_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g58_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g58_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogB/log_g59_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogB/log_g59_m2.dbf' not found
For the above mentioned alerts I followed the recommendations of SAP Note 491160. I dropped and recreated the mirrorlog files. But the next day again when I checked the backup it finished with warnings. At the database level there is no problem
SQL> select * from v$logfile;
GROUP# STATUS TYPE
MEMBER
IS_
59 ONLINE
/oracle/AS0/origlogB/log_g59_m1.dbf
NO
59 ONLINE
/oracle/AS0/mirrlogB/log_g59_m2.dbf
NO
GROUP# STATUS TYPE
MEMBER
IS_
58 ONLINE
/oracle/AS0/origlogA/log_g58_m1.dbf
NO
58 ONLINE
/oracle/AS0/mirrlogA/log_g58_m2.dbf
GROUP# STATUS TYPE
MEMBER
IS_
NO
57 ONLINE
/oracle/AS0/origlogB/log_g57_m1.dbf
NO
57 ONLINE
GROUP# STATUS TYPE
MEMBER
IS_
/oracle/AS0/mirrlogB/log_g57_m2.dbf
NO
56 ONLINE
/oracle/AS0/origlogA/log_g56_m1.dbf
NO
GROUP# STATUS TYPE
MEMBER
IS_
56 ONLINE
/oracle/AS0/mirrlogA/log_g56_m2.dbf
NO
55 ONLINE
/oracle/AS0/origlogA/log_g55_m1.dbf
NO
54 ONLINE
/oracle/AS0/origlogA/log_g54_m1.dbf
GROUP# STATUS TYPE
MEMBER
IS_
NO
54 ONLINE
/oracle/AS0/mirrlogA/log_g54_m2.dbf
NO
53 ONLINE
GROUP# STATUS TYPE
MEMBER
IS_
/oracle/AS0/origlogA/log_g53_m1.dbf
NO
53 ONLINE
/oracle/AS0/mirrlogA/log_g53_m2.dbf
NO
GROUP# STATUS TYPE
MEMBER
IS_
52 ONLINE
/oracle/AS0/origlogA/log_g52_m1.dbf
NO
52 ONLINE
/oracle/AS0/mirrlogA/log_g52_m2.dbf
NO
GROUP# STATUS TYPE
MEMBER
IS_
51 ONLINE
/oracle/AS0/origlogB/log_g51_m1.dbf
NO
51 ONLINE
/oracle/AS0/mirrlogB/log_g51_m2.dbf
GROUP# STATUS TYPE
MEMBER
IS_
NO
50 ONLINE
/oracle/AS0/origlogA/log_g50_m1.dbf
NO
50 ONLINE
GROUP# STATUS TYPE
MEMBER
IS_
/oracle/AS0/mirrlogA/log_g50_m2.dbf
NO
8 ONLINE
/oracle/AS0/origlogB/log_g18m1.dbf
As you can see from the above output at the database level everything is fine. So why during backup it is giving me warnings in DB12. Any help with this regard will be appreciated.
Regards
Mitesh NairHi Joe,
My OS is HP-UX. I dont think its a permission problem. Please find below the contents of origlogA and mirrlogA
predbci2:/oracle/AS0/origlogA#ls -rtl
total 1433712
drwxrwxrwx 2 oraas0 dba 96 Oct 15 03:27 cntrl
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 01:50 log_g52_m1.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 03:51 log_g50_m1.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 05:51 log_g54_m1.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 07:52 log_g53_m1.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 09:50 log_g55_m1.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 10:50 log_g56_m1.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 12:41 log_g58_m1.dbf
predbci2:/oracle/AS0/mirrlogA#ls -rtl
total 1433728
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 01:50 log_g52_m2.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 03:51 log_g50_m2.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 05:51 log_g54_m2.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 07:52 log_g53_m2.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 09:50 log_g55_m2.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 10:50 log_g56_m2.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 12:41 log_g58_m2.dbf
Regards
Mitesh -
Alert log file show me this error
Alert<DB Name>.log
=================
Tue Aug 31 12:13:00 2010
Errors in file /u01/app/oracle/admin/<DB Name>/udump/<Instance Name>ora5520.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
Tue Aug 31 12:13:00 2010
Completed: ALTER DATABASE OPEN
Tue Aug 31 12:13:00 2010
db_recovery_file_dest_size of 3072 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
==================
<DB Name>ora5520.trc file
=================
/u01/app/oracle/admin/<DB Name>/udump/<DB Name>ora5520.trc
Oracle Database 10g Release 10.2.0.3.0 - Production
ORACLE_HOME = /u01/app/oracle/product/10.2.0
System name: Linux
Node name: <DB Name>-invdev-ora-1
Release: 2.6.18-128.el5
Version: #1 SMP Wed Dec 17 11:42:39 EST 2008
Machine: i686
Instance name: <Instance Name>
Redo thread mounted by this instance: 1
Oracle process number: 15
Unix process pid: 5520, image: oracle@<DB Name>-invdev-ora-1 (TNS V1-V3)
*** SERVICE NAME:() 2010-08-31 12:12:59.130
*** SESSION ID:(159.3) 2010-08-31 12:12:59.130
Thread 1 checkpoint: logseq 2033, block 78039, scn 67047227
cache-low rba: logseq 2033, block 80480
on-disk rba: logseq 2033, block 80921, scn 67048897
start recovery at logseq 2033, block 80480, scn 0
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00313: open failed for members of log group 1 of thread 1
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 220Kb in 0.38s => 0.57 Mb/sec
Total physical reads: 4096Kb
Longest record: 2Kb, moves: 0/748 (0%)
Longest LWN: 48Kb, moves: 0/17 (0%), moved: 0Mb
Last redo scn: 0x0000.03ff15c0 (67048896)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 52/52 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 1442/1494 = 1.0
*** 2010-08-31 12:12:59.517
KCRA: start recovery claims for 52 data blocks
*** 2010-08-31 12:12:59.640
KCRA: blocks processed = 52/52, claimed = 52, eliminated = 0
ORA-00313: open failed for members of log group 1 of thread 1
*** 2010-08-31 12:12:59.641
Recovery of Online Redo Log: Thread 1 Group 1 Seq 2033 Reading mem 1
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 52/52 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 1494/1494 = 1.0
ORA-00313: open failed for members of log group 1 of thread 1
Error in executing triggers on database startup
*** 2010-08-31 12:13:00.526
ksedmp: internal or fatal error
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
Please guys can any one tell me what's prob.
It's Oracle 10G R2 Linux Machine. also it's development environment.Hi,
Look at the thread
Database startup error message
Regards, -
I am wondering if anyone has ever seen errors like this. They started showing up in our log file recently with the error below. Once this error starts, then tons of errors are generated and the log file grows exponentially.
2006-12-12 06:51:26,109 WARN [org.jboss.tm.TransactionImpl] Transaction TransactionImpl:XidImpl [FormatId=257, GlobalId=naap11//13513, BranchQual=] timed out. status=STATUS_ACTIVE
2006-12-12 06:51:26,124 ERROR [org.jboss.ejb.plugins.LogInterceptor] TransactionRolledbackLocalException in method: public abstract com.adobe.pof.omapi.POFObjectSet com.adobe.pof.omapi.POFObjectManagerLocal.retrieveObjectSet(com.adobe.pof.omapi.POFQuery, int,int,com.adobe.idp.Context) throws com.adobe.pof.POFException, causedBy:
org.jboss.util.NestedSQLException: Interrupted while requesting permit! Waited 0 ms; - nested throwable: (javax.resource.ResourceException: Interrupted while requesting permit! Waited 0 ms)
Eventually, we get the following message:
2006-12-12 06:51:30,622 WARN [org.jboss.ejb.plugins.jms.DLQHandler] Message resent too many times; sending it to DLQ; message id=ID:7-116593508609324
2006-12-12 06:51:30,622 WARN [org.jboss.tm.TransactionImpl] Transaction TransactionImpl:XidImpl [FormatId=257, GlobalId=naap11//17644, BranchQual=] timed out. status=STATUS_ACTIVE
2006-12-12 06:51:30,638 ERROR [org.jboss.ejb.plugins.jms.DLQHandler] Could not send message to Dead Letter Queue
We are using LiveCycle 7.2 (WF, FM, FS and RES). Any ideas are welcome.where i should place my .cgi files folder in apllication context
....i am using jboss server -
Hi,
I'm running CF 7.0.2. The app is using Flash forms.
I have this onError function in my Application.cfc.
<cffunction name="onError">
<cfargument name="Except" required="yes">
<cfargument name="EventName" type="string"
required="yes">
<cflog file="#This.Name#" type="error" text="Event Name:
#EventName#" time="yes">
<cflog file="#This.Name#" type="error" text="Messsage:
#except.message#" time="yes">
<cflocation url="errorPage.cfm" addtoken="no">
<cfabort>
</cffunction>
The app is working fine but my log file is full of errors:
Event Name: onRequestStart
Messsage: Event Handler Exception
Any idea what's wrong?
Is there any way to get more specific error message?
Thanks,
b.I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?
-
Fatal NI connect error 12203 resulting huge increase in sqlnet.log file
Hi,
I am getting the following error message in SQLNET.LOG file on the client machine. This is my upload program which takes few hours to complete and during the program run, the size of SQLNET.LOG file keeps on increasing and goes to 100's of MB and it contains only this error repeatedly.
But my program gets connected to Database and does the upload. But the size of SQLNET.LOG file grows like anything. Pls let me know what's going wrong.
ERROR in SQLNET.LOG File -
Fatal NI connect error 12203, connecting to:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle80)(ARGV0=oracle80ORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=C:\ORAWIN95\BIN\IFRUN60.EXE)(HOST=IT_DBA)(USER=IT))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 8.0.5.0.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 8.0.4.0.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 8.0.5.0.0 - Production
Time: 06-MAR-03 12:37:08
Tracing not turned on.
Tns error struct:
nr err code: 12203
TNS-12203: TNS:unable to connect to destination
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 102
TNS-00102: Keyword-Value binding operation error
nt secondary err code: 0
nt OS err code: 0
Regards,
Mitesh V.Hi,
Actually I thought this error is appearing in only one of the machines, but when I am figuring out, I found the same error in almost all the client machines.
Though the programs are running fine getting the database connectivity, I am not able to find why it is giving error showing connection through BEQ protocol.
Pls someone tell me why this is happening and how I will find out which protocol it is using.
Regards,
Mitesh Vijayvargiy -
Error occurs during the rendering of jsp component log file?
Hello. I am having troubles on locating the log file for this particular error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Error occurs during the rendering of jsp component.
Exception id: 11:59_31/07/07_0004_19351950
See the details for the exception ID in the log file
I searched all folders on my drive, using the exception id as keyword to search files that contains part of the id (0004_19351950), but to no avail. I wanted to see the log for me to identify the problem. Any ideas where I can look for it? or, better yet, what can be a solution to this runtime error?
I'm using the 2004s developer environment version. Thanks in advance.hi Arnold,
Go to Java Developer role -> expand Portal Tools folder -> click on Portal Logviewer. Put the exception id in the text-box corresponding to search -> click on search all files. Open the file that is displayed in the search result and make a search with the id again to refer to the exact line.
N.B: if you don't have Java developer role, using user admin, assign that role to you first
Cheers....... -
Log file for the workflow notification with the ID of 43533
Hi,
we are facing this error:
The notification with the ID of 43533 experienced problems when attempting to dispatch an email notification to the role ~WF_ADHOC-62. Subsequently the notification preference for the following users has been set to DISABLED. Please correct the issue and re-enable their notification preference.
so now i have to find out the log file for this notification error.I can get it under $APPLCSF/$APPLLOG directory starting with FNDCPGSC<process_id>.txt. But i dont know how to find out the process id.Can someone please assist me.
Thankswe are facing this error:
The notification with the ID of 43533 experienced problems when attempting to dispatch an email notification to the role ~WF_ADHOC-62. Subsequently the notification preference for the following users has been set to DISABLED. Please correct the issue and re-enable their notification preference.
so now i have to find out the log file for this notification error.I can get it under $APPLCSF/$APPLLOG directory starting with FNDCPGSC<process_id>.txt. But i dont know how to find out the process id.Can someone please assist me.Please see these docs.
Notification Id / Role are not Populated in the Update User Notification Preference Update Report Notification [ID 1330619.1]
User Notification Preference Updated to DISABLED [ID 1379564.1]
Email Not Received javax.mail.SendFailedException: Invalid Addresses [ID 876835.1]
Workflow Notification Mailer is Spamming the Email Accounts of Users [ID 1293792.1]
Thanks,
Hussein -
Problem in creating log file on Ubuntu(Linux)
hi
I have developed a project in java. which creates log file for exception handling. This is working fine on Windows but When I run the jar file on ubuntu then it is not creating log file and throwing an error.
Error Message="Permission Denied UnixFileSystem.java createFileExclusively()"
Code is :
strStartupPath = new java.io.File("").getAbsolutePath();
DateFormat dateformat = new SimpleDateFormat("yyyyMMdd");
Date date = new Date();
String strFileName = strStartupPath + "\\" + dateformat.format(date) + ".log";
File logFile = new File(strFileName);
Your assistance will be appriciated.
SonalIf you want to do this properly then you will have to make it OS specific. Various security systems on each platform will prevent you from freely writing your logfile unless you choose the correct location. The applications folder under MacOSX, for instance, requires Admin privileges. Under MacOSX and Windows, log files are typically stored in the Applications Data resp. /Library/Logs or ~/Library/Logs folder in MacOS X. In Unix and Linux you will typically use /var/log directory.
I think your question is rather Java than Linux specific, but there is a lot of information available for free on the web.
Perhaps the following example can help you to determine the OS:
public static final class OsUtils
private static String OS = null;
public static String getOsName()
if(OS == null) { OS = System.getProperty("os.name");
public static boolean isWindows()
return getOsName().startsWith("Windows");
public static boolean isUnix() // and so on
}Edited by: Dude on Apr 16, 2011 12:58 AM -
Not able to add new log file to the 11g database.
Hi DBA's
I am not able to add the log file i am getting error while adding the database.
SQL> alter database add logfile group 3 ('/oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') size 50m reuse;
alter database add logfile group 3 ('/oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') size 50m reuse
ERROR at line 1:
ORA-01505: error in adding log files
ORA-01577: cannot add log file '/oracle/DEV/db/apps_st/data/log03a.dbf' - file
already part of database
SQL> select a.group#, member, a.status from v$log a, v$logfile b where a.group# = b.group# order by 1;
GROUP# MEMBER STATUS
1 /oracle/DEV/db/apps_st/data/log01a.dbf ACTIVE
1 /oracle/DEV/db/apps_st/data/log01b.dbf ACTIVE
2 /oracle/DEV/db/apps_st/data/log02a.dbf CURRENT
2 /oracle/DEV/db/apps_st/data/log02b.dbf CURRENT
Kindly help me to add the new log file to my database.
Thanks,
SGHi Sawwan,
V$LOGMEMBER was written in the document,
I query the log members as bellow
1)select a.group#, member, a.status from v$log a, v$logfile b where a.group# = b.group# order by 1;
GROUP# MEMBER STATUS
1 /oracle/DEV/db/apps_st/data/log01a.dbf INACTIVE
1 /oracle/DEV/db/apps_st/data/log01b.dbf INACTIVE
2 /oracle/DEV/db/apps_st/data/log02a.dbf CURRENT
2 /oracle/DEV/db/apps_st/data/log02b.dbf CURRENT
2)SQL> select group#,member,status from v$logfile;
GROUP# MEMBER STATUS
2 /oracle/DEV/db/apps_st/data/log02a.dbf
2 /oracle/DEV/db/apps_st/data/log02b.dbf
1 /oracle/DEV/db/apps_st/data/log01a.dbf
1 /oracle/DEV/db/apps_st/data/log01b.dbf
But i am littile bit confused that there is no group or datafile called " Group 3 and log03a.dbf" as per the above query, how can i drop tease group and datafile.
and i crossverified in the data top the files are exist or not but those are not existing. but still i am getting the same error that i can't create that already exist.
can issue the bellow queris to drop those group which i dont think so it will exist?
SQL>alter database drop logfile group 3;
Thanks in advance.
Regards,
SG -
How to create a log file for bapi return structure
Hi ppl,
I am using BAPI_PO_CHANGE to mark the delivery of POs as complete after many validations through a classic report now my concern is i have been asked to create a log file which details the errors in the POs which is in the bapi return structure.
I don't know how to do can any one help at the earliest.
Regards,
Bharathy.hi
pls see this thread...
it may help you...
/people/kamalkumar.ramakrishnan/blog/2007/01/10/a-primer-on-using-and-creating-sap-application-log
thx
pavan
*pls mark for helpful answers -
Where is the Scheduler log file located?
I'm trying to track down and diagnose this error in my scheduling/bursting:
Error!! Could not deliver the output for Delivery channel: EMAIL. Please check the Log for error details...
But a search of my entire drive does not reveal any file with a .log extension that has been updated recently, nor do I see a reference to the location of said log file anywhere in the documentation.
Where is the log file to which this error message is referring? Running the OBIEE Suite 10.1.3.4.1 under Windows.
Thanks!Hi Mthompson,
Look at this on how to create the log file.
http://winrichman.blogspot.com/search/label/xdodebug
am sure, you did not create the email/smtp configuration, thats why you see this error. -
ColdFusion 11 REST warnings in log file?
I'm building a RESTful API with ColdFusion 11. Today I noticed there are a ton of warnings being logged to the coldfusion-error log file. For example:
Mar 04, 2015 8:09:52 AM com.sun.jersey.spi.inject.Errors processErrorMessages
WARNING: The following warnings have been detected with resource and/or provider classes:
WARNING: A HTTP GET method, public void api.Country.GetCountry() throws coldfusion.xml.rpc.CFCInvocationException, MUST return a non-void type.
WARNING: A HTTP GET method, public void api.Log.GetLog(java.lang.Double) throws coldfusion.xml.rpc.CFCInvocationException, MUST return a non-void type.
WARNING: A HTTP GET method, public void api.Logout.LogoutUser(java.lang.Double) throws coldfusion.xml.rpc.CFCInvocationException, MUST return a non-void type.
Here is one of my API endpoint functions:
<cfcomponent restpath="country" rest="true" output="false" extends="cfc.data">
<cffunction name="getCountry" access="remote" output="false" httpmethod="get" returntype="void">
<cfset LOCAL.countryData = getCountryData()>
<cfset LOCAL.restResponse = StructNew()>
<cfset restResponse = REQUEST.apiObj.response(200, countryData)>
<cfset restSetResponse(restResponse)>
</cffunction>
</cfcomponent>
My understanding is that returntype=void is a MUST in order to use restSetResponse(). This code works great, but the warnings in the log file don't make sense to me.
Am I doing something wrong?
Or is this some sort of "gap" where logging isn't factoring in REST services/functionality?
Is it possible to disable warning messages from getting logged?
Thank you!
Brian WhiteIs it possible that the application log on your production
server is not
configured to overwrite events as needed? Are other
non-ColdFusion
application events being logged?
Carl
aUniqueScreenName wrote:
> I'm using Coldfusion version 7,0,2,142559 on a windows
2003 server with IIS6
> (my prod box). A little over a month ago CF stopped
putting entries into the
> application.log file. Even when errors do occur that
should be logged
> application.log has nothing. I've gone through every
windows/cf/jrun log I
> could find and found nothing to indicate any problems at
the time of the last
> entry. Also no CF or windows updates were done around
that time.
>
> I have a development box setup exactly the same and it
does not exhibit the
> same problem. I can cause errors on the dev box and they
get logged in
> application.log. Yet when I do the same thing on my prod
box nothing gets
> logged. I've compared all the settings between the prod
and dev boxes and
> everything is the same.
>
> The prod server is functioning completely normal except
for the failure to put
> anything in application.log. I'm beyond pulling my hair
out on this one. Has
> anyone ecountered the same issue? My Google searches
have so far come up emtpy.
>
> -
Does anybody know where i can find the clues to an EM log file?
user1381515 wrote:
Does anybody know where i can find the clues to an EM log file?
unhandled exception error
STOP opening multiple threads for same problem!
Handle: user1381515
Status Level: Newbie
Registered: Dec 24, 2009
Total Posts: 59
Total Questions: 16 (13 unresolved)
so many questions & so few answers
how sad!
Maybe you are looking for
-
DELIVERY COMPLETED indicator for Services Purchase Order
hello experts, i'm working in SAP with R3 4.7 for developing funtion / BAPI for a mobile web application for services purchase order. i have a big problem: is it possibile to set the DELIVERY COMPLETED indicator (<i>ELIKZ</i>) in services purchase or
-
The handout style of Keynote has changed and the new style is less favorable. I normally used 4 slides per page (vertical direction) and some lines on the right side to write down some remarks. Is there a way to solve this problem?
-
How can I get rid of other files on my mac ?
how can I get rid of other files on my mac ?
-
Cant find converted/saved files
Finally converted pdf to .doc, but cant find converted files. where are they stored and how do i access them?
-
Issues with video playback on iPad 2
I have an iPad 2 (I had this issue with the iPad 1st gen. as well), and I'm having some playback issues on movies and TV shows purchased through iTunes. I've removed the movies/shows and re-synced, I'm using the cable that came with my iPad. The