[svn:bz-trunk] 15129: Update the sample jgroups-tcp. xml file with proper explanations of each property after reviewing the JGroups documentation .
Revision: 15129
Revision: 15129
Author: [email protected]
Date: 2010-03-30 06:17:55 -0700 (Tue, 30 Mar 2010)
Log Message:
Update the sample jgroups-tcp.xml file with proper explanations of each property after reviewing the JGroups documentation. This is still work in progress.
Modified Paths:
blazeds/trunk/resources/clustering/jgroups-tcp.xml
It seems you are asking in wrong forum. AFAIK, you are asking "how to add HTTP header to response generated by my own script". It depend on WWW server we are speaking of and language of script itself. If you will fail to found solution within documentation of the HTTP server and/or scripting language you are using, then the better place for your question is a forum related to such language and HTTP server.
In meantime, you can try other solituin. The "Refresh: 0;..." header is required for correct function of SoftKey:Next which is displayed by default. But you can redefine the content of SoftKey area using your own key. Such configuration is part of DirectoryObject you sent to phone. See definition of SoftKey 3 in example bottom. It's not original SoftKey:Next that depend on Refresh header. It's my own custom soft-key named "Next" with exact URL defined as part of key definition (replace 'N' with number of next page). It doesn't depend on Refresh header in any way. You should consider such advice as "temporary workaround". You should discover how to send HTTP header 'Refresh' from your script. Note, it's not possible to redefine one SoftKey only. If you wish to redefine a soft-key, then all soft-keys need's to be defined by you.
... followed by Title, Prompt,up to 32 ...
Dial
SoftKey:Dial
1
EditDial
SoftKey:EditDial
2
Next
https://an-url-to-your-server-and-script/test-Directory.asp?page=N
3
Cancel
SoftKey:Cancel
4
Exit
SoftKey:Exit
5
Similar Messages
-
Revision: 17461
Revision: 17461
Author: [email protected]
Date: 2010-08-24 10:10:38 -0700 (Tue, 24 Aug 2010)
Log Message:
Update example jgroups-tcp.xml file for JGroups 2.9.0 on the BlazeDS 3.x branch. Fixed a problem where the bind_addr property was set to a port number instead of an address. Updated the file to the version we have on BlazeDS/trunk which has descriptions of what the various settings do.
Modified Paths:
blazeds/branches/3.x/resources/clustering/2.9.0/jgroups-tcp.xmlRevision: 17461
Revision: 17461
Author: [email protected]
Date: 2010-08-24 10:10:38 -0700 (Tue, 24 Aug 2010)
Log Message:
Update example jgroups-tcp.xml file for JGroups 2.9.0 on the BlazeDS 3.x branch. Fixed a problem where the bind_addr property was set to a port number instead of an address. Updated the file to the version we have on BlazeDS/trunk which has descriptions of what the various settings do.
Modified Paths:
blazeds/branches/3.x/resources/clustering/2.9.0/jgroups-tcp.xml -
Revision: 3867
Author: [email protected]
Date: 2008-10-24 07:13:10 -0700 (Fri, 24 Oct 2008)
Log Message:
Add new user-agent info to the sample services-config.xml file.
Modified Paths:
blazeds/trunk/resources/config/services-config.xmlResolved! The problem was in the php code the wizard had generated as an example and that I had edited in Dreamweaver. I had tried to start a session and set session objects in the php code. I developed if() { statements} to check the session variable before executing the function in some of my data services. Apparently the wizard does not like this. I removed all references to session. I reconfigured the input types and the return types for each service. With the code now clean the wizard created the example code and placed the proper package in the scr.services package. I still have custom php code and it executes.
Things I learned:
If the php code stops when a session variable is not available in the if statement and the data service is refreshed, the wizard will not "look" beyond the if statement.
Functions downstream of a session variable misshap will show in the data services window but the functions will have a circle icon to the left of the function name and each variable to be passed to the php code will be declared as type = Object in Flashbuilder. The input types and return types will have to be reconfigured for each non-functioning function. Simply commenting out a portion of the php code and attempting a refresh will not make it work again.
When the wizard is unable to refresh properly because of a stop in the php code it stops working completely so additional refreshes or creation of code is not carried out.
I decided to create a My SQL table for user and other identifiers rather than attempting the session object again.
Sorry, I did not make screen shots as I solved this problem. I hope the solution is not hard to visualize.
Thanks for looking and considering how to help me. I hope my solution works for you. -
Revision: 17029
Revision: 17029
Author: [email protected]
Date: 2010-07-22 19:08:20 -0700 (Thu, 22 Jul 2010)
Log Message:
Update all samples to remove target player version from calls to the mxmlc target. Now we will just use the target player version from the flex-config.xml file. As this is used to locate playerglobal.swc, it's unlikely we would need this to be different than what is in flex-config.xml.
Turn the ocx target for installing the player back on again and update it to use the new silent uninstall and install switches for the 10.1 player.
checkintests: passed
Modified Paths:
blazeds/trunk/apps/samples/WEB-INF/flex-src/dashboard/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/inventory/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/runtimeconfig-messaging/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/runtimeconfig-remoting/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-101/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-chat/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-datapush/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-httpservice/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-remoteobject/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-update/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/testdrive-webservice/build.xml
blazeds/trunk/apps/samples/WEB-INF/flex-src/traderdesktop/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/chat/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/collaboration/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/companymgr/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/feedstarter/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/insync01/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/insync02/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/insync03/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/insync04/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/insync05/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/insync06/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/simplepush/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/spring-blazeds-101/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/spring-blazeds-security-101/build.xml
blazeds/trunk/apps/samples-spring/WEB-INF/flex-src/traderdesktop/build.xml
blazeds/trunk/build.properties
blazeds/trunk/build.xml
blazeds/trunk/sampledb/flexdemodb/flexdemodb.properties
blazeds/trunk/servers/apache-tomcat-6.0.14/conf/tomcat-users.xmlHi Chris,
I tried removing and adding back the dialpeer 101 and adding .T to 501 but still the same result. Please help.
Please see the following:
SEC-HO-VGATEWAY01#show dial-peer voice summ
dial-peer hunt 1
AD PRE PASS OUT
TAG TYPE MIN OPER PREFIX DEST-PATTERN FER THRU SESS-TARGET STAT PORT KEEPALIVE
501 voip up up 0 syst
1001 voip up up 5... 1 syst ipv4:10.13.14.21
1002 voip up up 1...$ 1 syst ipv4:10.13.14.21
103 voip up up 911$ 1 syst dns:toronto2.voip.ms
102 voip up up 1[2-9]..[2-9]...- 1 syst dns:toronto2.voip.ms
...$
101 voip up up [2-9]..[2-9]....- 1 syst dns:toronto2.voip.ms
..$
SEC-HO-VGATEWAY01#show run | sec dial-peer voice 501
dial-peer voice 501 voip
incoming called-number .T
voice-class sip bind control source-interface Loopback0
voice-class sip bind media source-interface Loopback0
dtmf-relay rtp-nte
codec g711ulaw
no vad -
Hi,
I would like to know if its possible to insert or update
existing data of a XML file with flash?
And how can I do it?This code have two procedures or functions the createXML is
called first this one asks for the variable send using get called
fileName (Append this variable to the page request). The function
called writeToFile opens the file and writes to it.
Form flash you need to create the xmlfile and call the
sendAndLoad method. -
Revision: 8823
Author: [email protected]
Date: 2009-07-27 09:12:08 -0700 (Mon, 27 Jul 2009)
Log Message:
Updated the sample messaging-config.xml with the new disallow-wildcard-subtopics configuration element.
Modified Paths:
blazeds/trunk/resources/config/messaging-config.xmlHi,
could you let us know what version of OEPE you were running prior to the upgrade along with the Eclipse version ? Also was the previous installation a full OEPE install or was it installed via the update site ?
thanks
Raj -
Revision: 9810
Author: [email protected]
Date: 2009-08-30 06:58:37 -0700 (Sun, 30 Aug 2009)
Log Message:
Update BlazeDS/trunk to version 248835 of qa-frameworks.zip to pick up recent changes to the config suite.
Fix problem in build.xml for config suite that would have caused mxunit tests not to run locally, ie. outside of a regression run.
Fix problem with one of the config suite tests. The services-config.xml file used by the test looks like it was copied over from qa-regress and a bootstrapservice got removed from qa-regress along with the bootstrap class, so the copied services-config.xml file also needed to have the bootstrapservice removed because the class it depended on got deleted.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/dataTypesTest/s ervices-config.xml
blazeds/trunk/qa/resources/frameworks/qa-frameworks.zipRevision: 9810
Author: [email protected]
Date: 2009-08-30 06:58:37 -0700 (Sun, 30 Aug 2009)
Log Message:
Update BlazeDS/trunk to version 248835 of qa-frameworks.zip to pick up recent changes to the config suite.
Fix problem in build.xml for config suite that would have caused mxunit tests not to run locally, ie. outside of a regression run.
Fix problem with one of the config suite tests. The services-config.xml file used by the test looks like it was copied over from qa-regress and a bootstrapservice got removed from qa-regress along with the bootstrap class, so the copied services-config.xml file also needed to have the bootstrapservice removed because the class it depended on got deleted.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/dataTypesTest/s ervices-config.xml
blazeds/trunk/qa/resources/frameworks/qa-frameworks.zip -
Revision: 18928
Revision: 18928
Author: [email protected]
Date: 2010-12-01 14:16:56 -0800 (Wed, 01 Dec 2010)
Log Message:
fixing the sample service-config.xml for max-object-nest-level setting
Modified Paths:
blazeds/trunk/resources/config/services-config.xmlyou have your driver jar in Tomcat\common\lib?
if so, check your classpath, it could be that. -
Just yesterday I downloaded the newest update for iTunes, a few days before doing this I purchased music, but after doing the update my songs will not play. It shows a message that says this file cannot be located, what can I do to find the location?
The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time? -
while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?
Hi there aliyan,
I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below.
If you see 'No SIM' alert on iPhone
-Griff W. -
I have an iPhone 3GS and have updated to IOS 6.1. Before with emails there was a user bar at the bottom which allowed you to move emails to folders, print etc, but it now seems to be removed. Can you help ?
Close out of the mail app, double click the home button and completely close out of the mail app.
Then do a reset, hold down the home/sleep button together until you see the apple logo and then release then wait for the phone to boot back up.
then check your mail again. -
To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?
Thanks for the reply.
But this library doesn't contain any sample .cfg and .dat files which can be read and understood. Can you please provide the same? -
How to update Elements value inside existing xml file
Hi Gurus,
Am somehow new to java and working on xml with java, i have a scenario where i want to update the elements of my existing xml file, i know its possible as i have posted one code on this forum which updates the values of the arrtibutes of existing xml file. Ref :
http://forum.java.sun.com/thread.jsp?forum=34&thread=186091&start=15&range=15&hilite=false&q=
But am not able to use the same code to update the vlaues of the attribute.
if i have this xml file :
<?xml version="1.0"?>
<RootElement>
<Transaction>
<Task9>
<TaskID>Task9</TaskID>
<Description>My Test Case</Description>
<Time>12/12/2004</Time>
</Task9>
</Transaction>
<Transaction>
<Task2>
<TaskID>Task2</TaskID>
<Description>Testing my xml</Description>
<Time>12/12/2004</Time>
</Task2>
</Transaction>
</RootElemen>
Now i want to update teh </Description> and </Time> field using the code that i have given above in the link.
If any one can help me ill really appreciate.The value of an element is stored in a child node of that element. For example, let's say that "e" references the node <Description> then:
e.getFirstChild().getNodeValue() => "My Test Case" -
How to get the encoding of a XML file ...
Hi,
How do you get the encoding of a XML file?
For example,
<?xml version="1.0" encoding="SJIS"?>
I am trying to retrieve the above encoding="SJIS", but I can't seem to locate the API for doing so.
Thanks in advance for any help,
EricHi ddossot,
Thanks for your suggestion.
However, the xerces.jar file that comes with my old tomcat server is an old version and thus, the getEncoding method is not even present in the DocumentImpl class. The option to update to a newer version of tomcat and xerces is not available. What a pity... :-(
Well, I just have to try to find a way around. Worst case scenario, parse the first line in the xml file myself.
Regards,
Eric -
How to write the nodevalue back to xml file?
Hi, Everybody:
These are two packages I used. javax.xml.parsers.*,org.w3c.dom.*
Now I use "setNodeValue("abc") to set the node value to "abc". But it is not really saved back into XML file. It only change the node value in memory.
How to write the changes back to XML file? Thank you very much for your help.
Michelle* Version : 1.00
* File Purpose : Given the xml file loads into dom and recreate the file with the updated values.
* Developer : Kashif Qasim : 25/july/04
* Modify detail :
import java.lang.*;
import java.io.*;
import java.util.*;
import java.text.*;
import org.w3c.dom.*;
import org.apache.xerces.parsers.DOMParser;
import org.apache.xerces.*;
public class XMLWriter
private String displayStrings[] = new String[5000];
private int numberDisplayLines = 0;
private Document document;
//private final Node c;
public synchronized void displayDocument(String uri,Vector UpdatedValues,String getTaskID)
try {
DOMParser parser = new DOMParser();
parser.parse(uri);
document = parser.getDocument();
display(document, "",UpdatedValues);
} catch (Exception e) {
e.printStackTrace(System.err);
ReadXmlConfig objReadXmlConfig = null;
FileWriter filewriter = null;
try {
filewriter = new FileWriter(uri);
for(int loopIndex = 0; loopIndex < numberDisplayLines; loopIndex++){
filewriter.write(displayStrings[loopIndex].toCharArray());
//System.out.println("displayStrings[loopIndex].toCharArray() "+displayStrings[loopIndex].toString());
//filewriter.write("\n");
filewriter.close();
System.gc();
objReadXmlConfig = new ReadXmlConfig();
objReadXmlConfig.ITSLog("File updated for "+getTaskID+" succesfully, file is closed now ");
} catch (IOException e) {
System.err.println("Caught IOException: " + e.getMessage());
objReadXmlConfig = new ReadXmlConfig();
objReadXmlConfig.ITSErrorLog("File updated FAILED for "+getTaskID+". Reason for file error "+e.toString());
}finally {
if (filewriter != null) {
System.out.println("Closing File");
objReadXmlConfig =null;
try{
filewriter.close();
}catch(IOException e){
System.err.println("Caught IOException: " + e.getMessage());
} else {
System.out.println("File not open");
private void display(Node node, String indent, Vector UpdtRecs)
if (node == null) {
return;
int type = node.getNodeType();
NodeList nodeList = document.getElementsByTagName("QueryParm");
int TotalRecs = UpdtRecs.size();
switch (type) {
case Node.DOCUMENT_NODE: {
displayStrings[numberDisplayLines] = indent;
displayStrings[numberDisplayLines] +=
"<?xml version=\"1.0\" encoding=\""+
"UTF-8" + "\"?>";
numberDisplayLines++;
displayStrings[numberDisplayLines] += "\n";
display(((Document)node).getDocumentElement(), "",UpdtRecs);
break;
case Node.ELEMENT_NODE: {
if(node.getNodeName().equals("QueryParm")) {
for(int i =0 ; i< nodeList.getLength() ; i++)
Node nodeQry = nodeList.item(i);
NamedNodeMap nnp = nodeQry.getAttributes();
for(int j= 0 ; j < nnp.getLength() ; j++)
Attr atr = (Attr) nnp.item(j);
if(atr.getName().equalsIgnoreCase("value_"+(i+1)))
//System.out.println(atr.getName() +" : " + atr.getNodeValue() );
atr.setNodeValue(UpdtRecs.get(i).toString());
displayStrings[numberDisplayLines] = indent;
displayStrings[numberDisplayLines] += "<";
displayStrings[numberDisplayLines] += node.getNodeName();
int length = (node.getAttributes() != null) ?
node.getAttributes().getLength() : 0;
Attr attributes[] = new Attr[length];
for (int loopIndex = 0; loopIndex < length; loopIndex++) {
attributes[loopIndex] = (Attr)node.getAttributes().item(loopIndex);
for (int loopIndex = 0; loopIndex < attributes.length; loopIndex++) {
Attr attribute = attributes[loopIndex];
displayStrings[numberDisplayLines] += " ";
displayStrings[numberDisplayLines] += attribute.getNodeName();
displayStrings[numberDisplayLines] += "=\"";
displayStrings[numberDisplayLines] += attribute.getNodeValue();
displayStrings[numberDisplayLines] += "\"";
displayStrings[numberDisplayLines]+=">";
numberDisplayLines++;
NodeList childNodes = node.getChildNodes();
if (childNodes != null) {
length = childNodes.getLength();
indent += " ";
for (int loopIndex = 0; loopIndex < length; loopIndex++ ) {
display(childNodes.item(loopIndex), indent,UpdtRecs);
break;
case Node.CDATA_SECTION_NODE: {
displayStrings[numberDisplayLines] = "";
displayStrings[numberDisplayLines] += "<![CDATA[";
displayStrings[numberDisplayLines] += node.getNodeValue();
displayStrings[numberDisplayLines] += "]]>";
numberDisplayLines++;
break;
case Node.TEXT_NODE: {
displayStrings[numberDisplayLines] = "";
String newText = node.getNodeValue().trim();
if(newText.indexOf("\n") < 0 && newText.length() > 0) {
displayStrings[numberDisplayLines] += newText;
displayStrings[numberDisplayLines] += "\n";
numberDisplayLines++;
break;
case Node.PROCESSING_INSTRUCTION_NODE: {
displayStrings[numberDisplayLines] = "";
displayStrings[numberDisplayLines] += "<?";
displayStrings[numberDisplayLines] += node.getNodeName();
String text = node.getNodeValue();
if (text != null && text.length() > 0) {
displayStrings[numberDisplayLines] += text;
displayStrings[numberDisplayLines] += "?>";
displayStrings[numberDisplayLines] += "\n";
numberDisplayLines++;
break;
if (type == Node.ELEMENT_NODE) {
displayStrings[numberDisplayLines] = indent.substring(0,
indent.length() - 4);
displayStrings[numberDisplayLines] += "</";
displayStrings[numberDisplayLines] += node.getNodeName();
displayStrings[numberDisplayLines] += ">";
displayStrings[numberDisplayLines] += "\n";
numberDisplayLines++;
indent += " ";
public static void main(String args[])
Vector xmlValue = new Vector();
xmlValue.add(0,"Kashif");
xmlValue.add(1,"Qasim");
//displayDocument("NewMediation.xml",xmlValue);
<?xml version="1.0" encoding="UTF-8"?>
<Mediation>
<Task1>
<Source>
<SourceDriver>com.microsoft.jdbc.sqlserver.SQLServerDriver</SourceDriver>
<SourceConnection>jdbc:microsoft:sqlserver://10.2.1.58:1433;DatabaseName=MTCVB_HDS;</SourceConnection>
<SourceUser>sa</SourceUser>
<SourcePassword>sa</SourcePassword>
<Table>
<SourceTable>t_Agent</SourceTable>
<SourceQuery><![CDATA[SELECT SkillTargetID,PersonID,PeripheralID,EnterpriseName,PeripheralNumber,Deleted,TemporaryAgent,AgentStateTrace,ChangeStamp FROM t_Agent where SkillTargetID > {value_1} order by SkillTargetID]]>
</SourceQuery>
<SourceParm BusinessRule="" ColumnName="SKILLTARGETID" ColumnNumber="1" DataType="Numeric" DefaultValue="0" Format="mm/dd/yyyy xx:xx:xx XX">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="PERSONID" ColumnNumber="2" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="PERIPHERALID" ColumnNumber="3" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="ENTERPRISENAME" ColumnNumber="4" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="PERIPHERALNUMBER" ColumnNumber="5" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="DELETED" ColumnNumber="6" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="TEMPORARYAGENT" ColumnNumber="7" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="AGENTSTATETRACE" ColumnNumber="8" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="CHANGESTAMP" ColumnNumber="9" DataType="String" DefaultValue="" Format="">
</SourceParm>
<QueryParm FldName_1="SkillTargetID" FldType_1="Number" value_1="0">
</QueryParm>
</Table>
</Source>
</Task1>
</Mediation>
The QueryParm values are updated thru this code :)
Hope it helps u ...
Maybe you are looking for
-
The older compessor allows multiple cpus to run, to process footage.
-
Acrobat 9.0 crashes when attempting to launch
I just loaded Acrobat 9.0, ran the updater and believe I am at ver 9.3x. When I attempt to launch Acrobat, it crashes each and every time. I am using Apple OS 10.6.2 on a MacPro with 8GB of ram. The user type is a managed user. Any ideas?
-
Has anyone had the problem of not being able to send texts to certain people?
-
Hello, I am trying to configure a bpm for this scenario. I have a web application which will send a customeised PO xml to XI. This po will contain a single line item info. XI will add this line items into a single po and that will be transfered to
-
Firefox say that the adobe acrobat plugin is vunerable and needs to be updated. When I click on update and try to download adobe says it is already installed. I went back to the firefox pluin page after attempting to download and it still says that t