[svn:fx-4.x] 15132: Set layoutDirection="ltr" on the Group so the CheckBox is not mirrored.

Revision: 15132
Revision: 15132
Author:   [email protected]
Date:     2010-03-30 07:38:21 -0700 (Tue, 30 Mar 2010)
Log Message:
Set layoutDirection="ltr" on the Group so the CheckBox is not mirrored.
QE notes:
Doc notes: None
Bugs: SDK-26023
Reviewed By: Hans
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-26023
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/wireframe/src/mx/skins/wireframe/CheckBoxSkin.m xml

Similar Messages

Set up a read only group on the config.xml file through Admin console

I would like to set up a group which can use Admin console
(http://ip:7001/console).
However, this group cannot deploy, modify anything on the configuration. In
the document, I can add ACL lists. But how? The table of permission
function on the document is not clear. For example, there is no READ and
WRITE on the table in the Admin Server guide. Please help.
If I have guest enable on the Admin console. What is the user name and
password of a gest to use the Admin console?
Thanks for help.

Do you want to expose the Admin app on the same network as the managed app?
If not, just hide (black hole) the IP/port to the admin server.
If I have guest enable on the Admin console. What is the user name and
password of a gest to use the Admin console?I don't think guest has a password. Allowing guest means non-auth'd users
can access it.
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"SLC" <[email protected]> wrote in message
news:3c5dcd78$[email protected]..
I would like to set up a group which can use Admin console
(http://ip:7001/console).
However, this group cannot deploy, modify anything on the configuration.In
the document, I can add ACL lists. But how? The table of permission
function on the document is not clear. For example, there is no READ and
WRITE on the table in the Admin Server guide. Please help.
If I have guest enable on the Admin console. What is the user name and
password of a gest to use the Admin console?
Thanks for help.

Page print order disruption on SSRS with tablix set LayOutDirection to RTL

Hi
Strange thing occurs when setting tablix to display as RTL layout.
I was building ssrs report which contains matrix which display dynamic columns order by a time field
it displays like this:
now all I wanted to get a mirror image by setting the LayOutDirection property to RTL.
strangely this is the result:
the data rendered on the 1st page is the one that should have been displayed on the 6 st page and vice verse , the pages are rendered from the last one to the first while all I did is changing the layout property.
How can i achieve the correct behavior.
Thanks,
Lior Schwimmer

Hi Lior,
According to your description, you have created a matrix and column group is sorted based on the time field. But when you specify the RTL layout for the matrix, the report doesn’t display correctly in print layout.
In Reporting Services, if we set the LayoutDirection as RTL, the data region will display from right to left with its structure as a mirror image of the data region if it were rendered left to right. In this scenario, the corner of the data region appears
in the upper right corner. If dynamic columns exist in the report, they will expand to the left. Besides, RTL settings do not affect the order of the data in the data region, columns are simply ordered differently.
As we tested in our environment, the mirror image can display correct both in preview results and print layout results after specifying RTL setting for the matrix. So in your scenario, please check if your are specifying the RTL property for the matrix.
If issue persists, please share the report design for our analysis. Also please provide some screenshots about the full preview results in preview and print layout options.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support
Hi.
I share the report, Did you try to check the problem?
Thanks,
Lior Schwimmer

[svn] 3526: The call to the TestNG task in the configuration test framework had haltOnFailure set to true which is not what we want .

Revision: 3526
Author: [email protected]
Date: 2008-10-08 14:21:40 -0700 (Wed, 08 Oct 2008)
Log Message:
The call to the TestNG task in the configuration test framework had haltOnFailure set to true which is not what we want. Failures will get logged to the database at which point we can review them.
Also fix a failing test.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/jms/NoJNDINameT est/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/jms/NoJNDINameT est/services-config.xml

I have a standard Ant build script for signing a jar file. I import it into my master Ant build files with
<import file="Sign.xml"/>
and then in my master Ant script I setup the name of the jar file e.g.
<property name="jar-file" value="${fun}/FunApplet.jar"/>
and then invoke a target
<target name="sign-jar" depends="jar, sign">
</target>
Since this target (sign-jar) depends on target 'jar' and target 'sign' it executes the 'jar' target and then the 'sign' target that is contained in Sign.xml.

[svn:bz-trunk] 19769: Add destination and two streaming endpoints to test the invalidate-messageclient-on-streaming-close setting .

Revision: 19769
Revision: 19769
Author:   [email protected]
Date:     2011-01-14 12:05:23 -0800 (Fri, 14 Jan 2011)
Log Message:
Add destination and two streaming endpoints to test the invalidate-messageclient-on-streaming-close setting.
Modified Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/messaging-config.mods.xml
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/services-config.mods.xml

Originally Posted by namal
Hello,
can you please reupload the file again? The link doesn't work. I really need this driver pack for the Audigy 2 NX. I had Windows 7 and i don't want to buy a new external Sound Card for my notebook. Much thanks for the great work.
In case you still require your driver and Alchemy, here are the links for the Audigy 2 NX
Downloads Page
http://support.creative.com/Products...05&prodID=9103
Driver
http://support.creative.com/download...wnloadId=11994
Alchemy
http://support.creative.com/download...wnloadId=12579

[svn:cairngorm3:] 17872: Popup: Exposed set accessor of open for view state usage and fixed bug when closing from model within popup .

Revision: 17872
Revision: 17872
Author:   [email protected]
Date:     2010-09-27 08:04:40 -0700 (Mon, 27 Sep 2010)
Log Message:
Popup: Exposed set accessor of open for view state usage and fixed bug when closing from model within popup. http://www.spicefactory.org/forum/viewtopic.php?p=3932. Added new sample to show model and view state interactions.
Modified Paths:
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpBase.as
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpFactory.as
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpWrapper.as
    cairngorm3/trunk/libraries/PopupTest/.actionScriptProperties
    cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopup.mxml
    cairngorm3/trunk/libraries/PopupTest/src/samples/PopUpPM.as
Added Paths:
    cairngorm3/trunk/libraries/PopupTest/src/PopUpModelExample.mxml
    cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopupWithModel.mxml

Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh.

When I first am looking at my newly uploaded photos in "Library", a box appears near the bottom of the photo that says "loading" (the photo looks good to me), then it is more "faded" and does not look as good. Is there some setting on that I am not aware

When I am first looking at my newly uploaded photos in "Library," a box appears near the bottom of the photo that says "Loading". While it is loading, I usually think the photo looks "good". After the photo is done loading, it looks more washed out. Is there some sort of setting that I might have on (or that I need to turn on) so that this does not happen. I have Lr4. Thanks.

Hi Tracy,
There used to be a way to see if poster was new to the forum.., anyway - welcome to the forum.
As I was alluding to, biggest differences in initial display are due to:
* Camera calibration profile.
* Auto-exposure/contrast settings (for which compensations have been auto-applied in camera, but not in Lightroom).
So, choose a matching camera calibration profile (whether that's an option or not depends on your camera model - they're available for many but not all models) if you prefer one of them over "Adobe Standard" (the factory default profile).
Also, your camera covers for underexposure due to non-optimal auto-exposure/contrast setting, Lightroom doesn't, so your options are:
* turn it off in camera.
* learn to compensate manually (or automatically via a plugin) in Lightroom.
Of course, in addition to preferred defaults (alt-click big "reset" button in dev module), come up with some presets which are appropriate for your druthers and type of photography.. e.g. these will compensate Nikon ADL settings:
http://www.robcole.com/LrForumSupport/ADL%20Compensations%20%282012%29.zip
Cheers,
Rob

Setting up HP LaserJet Pro P1102w for wireless but can not save wireless settings

This printer worked fine on wireless with my last TWC modem/router, but I have tried for hours to set it up with a new one and it simply will not let me. USB works fine, but when I follow the instructions found here: OS X Yosemite Wireless. I choose Method three at this link: Method three: Wireless setup using a USB connection. Here is what happens after this:
1. I downloaded the latest Apple HP drivers on my iMac (HPPrinterDrivers3.0.dmg).
2. Clicked Apple Software Updates to ensure I had the latest.
3. Turned on the printer
4. Has paper and is in ready mode with no flashing lights
5. Plugged USB from printer into iMac
6. Followed HP instructions: Systems Preferences > Printers & Scanners > Clicked on the P1102w printer which was already on the list > Open Print Queue > Open Printer Utility > HTML Config... > Network Tab > Wireless (confirmed it was enabled, I refreshed the network names and added my wireless network, added my wireless network password) > Apply.
This is where everything crashes. After clicking Apply, the page will show up blank, the HTML will be messed up, or I will receive a message that says:
Safari can’t open the page “http://;ocalhost:5050/cgi-bin/ip_wireless_result.htm”. The error is: “cannot parse response” (NSURLErrorDomain:-1017)
I have tried other Chrome and Firefox and got similar results. At this point, I am out of options based on the HP support sites that I have found. One HP site said to uninstall the HP software located in Libraries > Printers, so I did this.
Any help would be greatly appreciated. Thanks.

Hi @txrun,
I see that you are experiencing issues setting up the printer on the new router. I will certainly do my best to help you.
Make sure Safari is set as the default browser. Sometime the Embedded Web Server won't open or will error out, if it isn't. Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
Restore printer defaults first and then run the HTML again. You may need to delete and add the printer again into the Printers and Scanners to be able to open the HTML again.
Restore defaults: Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print a configuration page to make sure the old network settings are cleared. Printing a Configuration Page.
If you are still having issues, please check these settings on the router.
The printer is only capable of sending/receiving in the 2.4Ghz band.
If it is set to 5 GHZ network you may need to change to 2.4 GHZ. (rename the 5ghz or shut it off)
The WPA key setting needs to be on AES to work correctly not TKIP.
Multi casting needs to be turned on.
Firewall on router has to have open ports for printer.
If you have Mac Filtering you need to give printer hardware address from configuration page.
You might need to contact your router company for further assistance to check those settings.
If there is anything else I can help you with, just let me know.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version.

Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version. Paragraphs seem to only be dealt with in styles, and the Formatting window for text doesn't seem to have the space after paragraph contrtol that the older Inspector had. What am I missing?

Sorry I did this without looking:
Side panel >Text > Style > Spacing > Turn the triangle > Before Paragraph/After Paragraph/
This is the trouble with the Peeky Boo Contextual Interface that so many wiser heads than mine love to love.
Peter

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

Make an appointment at the genius bar and get the phone replaced.

I thought I set up my computer to store my I tunes library to my external hard drive. However, I recently found out that my library is stored on my main C drive. Does any one know how to tranfer the libray from the C drive to an exteranl dirve.

I thouhgt I set up ITunes to store my library on the external drive. However, I recently sound out that the library is stored on my main C drive. Is there someway to move the library to the exernal drive and still have everything function correctly?

If you go into Edit > Preferences > Advanced then you can change the location of the iTunes media folder. Keep in mind that if you do this and you unplug your external hard drive, iTunes won't be able to locate your music and you may get the little red "!" marks.

HT204291 My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green). My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple

My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green).
My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple Menu. The “Settings” does however displays the General menu allowing me to see:
Apple software: 7.1 (7003)
Apple TV: Model No. A1464, Part No. MD199B/A
Signal Strength shows 5 circles.
It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video. I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2. Can you help please?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

SelectManyListbox : How to set the value in the bean ?

Hi,
How can I set the selected values from a selectManyListbox in the bean ?
My page:
                    <li>
                         <div class="box_multiple_selects clearfix">
                              <div>
                                   <span>Esportes Selecionados</span>
                                   <h:selectManyListbox id="esportes_selecionados" size="10" value="artigoDetailsBean.esportes"/>
                              </div>
                              <div class="btns_fluxo fl">
                                   <button value="<<" name="all_right_hand">>></button>
                                   <button value=">" name="one_right_hand">></button>
                                   <button value="<" name="one_left_hand"><</button>
                                   <button value="<<" name="all_left_hand"><<</button>
                              </div>
                              <div>
                                   <span>Esportes Cadastrados</span>
                                   <h:selectManyListbox id="esportes_cadastrados" size="10">
                                        <f:selectItems value="#{artigoDetailsBean.esporteList}" />
                                   </h:selectManyListbox>
                              </div>
                         </div>
                    </li>
"It´s a move right-left panel". In the right listbox are the database data, and the user click in the left arrow to move the elements (options) from right listbox to the left, and I´d like to get the selected values from the left listbox.
The bean:
public class ArtigoDetailsBean {
private Collection<String> esportes;
     public Collection<String> getEsportes() {
          return esportes;
     public void setEsportes(Collection<String> esportes) {
          this.esportes = esportes;
     public List<SelectItem> getEsporteList() {
          List<SelectItem> esportes = new ArrayList<SelectItem>();
          for(Object esporte: artigoDetailsCommand.getEsporteList() ) {
               esportes.add( new SelectItem( ((EsporteVO)esporte).getId().toString(), ((EsporteVO)esporte).getDescricao() ) );
          return esportes;
Thanks in advance,
Sergio Stateri Jr.
[email protected]

This blog shows an example of what you are trying to do - when the user clicks the left arrow it triggers an action event that puts the value into the left list, and vice-versa:
[http://weblogs.java.net/blog/driscoll/archive/2008/11/jsf_20_the_swit_1.html|http://weblogs.java.net/blog/driscoll/archive/2008/11/jsf_20_the_swit_1.html]
Ignore the 'JSF 2.0' in the header - it's not JSF 2.0 in this example!
Also - don't post your email address on the forums - you might get spammed :)
m

I have an "old" Apple ID set up 13 years ago. Apple has now gone to using email address as the apple ID. I have apps to update and they ask for old ID. it does not exist. How can I get the ID on the app changed to the new apple ID

I set up an apple id many years ago when itunes was established. Within the past year or so, Apple has changed to using email address as user id. My problem is that I have many applications that I can not update due to the fact that it is asking for the password of the old ID. It does not exist anymore. Any ideas on how to get the new apple id associated with the application without deleting the application. Several of these apps I purchased.

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

Issues with setting up ATT 3g. ATT reconizes the setup but IPAD 2 won't connect with 3g network

Setup brand new IPAD 2 ATT wifi +3G. Everything went smooth even setting up the ATT cellular data connect. ATT reconized the purchase however the IPAD will not erconize the 3G function when the wifi is turned off. I have an Iphone 4 and the 3G network works excellant from where i'm using the IPAD 2.

We had the same issue, and had to take the iPad to an ATT store, where they changed out the SIM card. It worked fine after that.

[svn:fx-4.x] 15132: Set layoutDirection="ltr" on the Group so the CheckBox is not mirrored.

Similar Messages

Maybe you are looking for