[svn:fx-trunk] 8452: - Fix flicker problem with constraint bound text that is being autoSized.
Revision: 8452
Author: [email protected]
Date: 2009-07-08 08:38:32 -0700 (Wed, 08 Jul 2009)
Log Message:
- Fix flicker problem with constraint bound text that is being autoSized. If the remeasure is done in a 2nd pass you will see a flicker as all the objects are moved to accommodate the reflowed text.
- Fix data binding issue with text setter.
- Rework measure() to accommodate implicit autoSize.
If explicitWidth or widthInChars specified and explicitHeight or heightInLines specified, or for now, blockProgression != "tb", the text has fixed dimensions and is not auto-sized.
If no text and width specified, but no height, start at specified width and one line high and grow taller.
If no text and height specified, start at 1 char wide with the specified height and grow wider.
If neither width nor height specified, and toFit lineBreaks, start at explicitMaxWidth, or default maxWidth of 160, and grow taller.
If neither width nor height specified, and explicit lineBreaks width is unlimited and can grow taller.
These are further constrained by min/max Width and Height except in the case that explicitWidth or explicitHeight are specified.
- Change default maxWidth for RichText and SimpleText to 160 to match RET. Previously it was 10000. This is used for
text with toFit lineBreaks if a width isn't specified.
QA Notes: 12 or so TextGraphic tests fail because of the new default maxWidth.
Doc Notes:SDK-22014, SDK-21837
Reviewers: Gordon
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-22014
http://bugs.adobe.com/jira/browse/SDK-21837
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/RichEditableText.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/RichEditable TextContainerManager.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/TextGraphicE lement.as
Added Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/RichEditable TextEditManager.as
You have used elements like header, footer, footer1 and nav without using the correct DOCTYPE declaration. Replace the first line of your code with
<!doctype html>
Also have a look here for other problems http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fhome.surewest.net%2Fstorytales%2F test%2Fforposting.html
After the above has been fixed, please come back here to fix the remaining problem(s)
Gramps
Similar Messages
-
does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?
Hello Mokhtary123 and welcome to Apple Support Communities,
It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
A flashing question mark or globe appears when you start your Mac - Apple Support
OS X Recovery
http://support.apple.com/en-us/HT4718 -
[svn:fx-trunk] 10635: * Fixed FB issue with FXG in library projects.
Revision: 10635
Author: [email protected]
Date: 2009-09-28 06:49:45 -0700 (Mon, 28 Sep 2009)
Log Message:
Fixed FB issue with FXG in library projects.
QE notes:
Doc notes:
Bugs: FB-22197
Reviewer: pfarland
Cycloner: gcomnino
Tests run: checkintests
Is noteworthy for integration: Yes, fixes FB issue
Code-level description of changes:
Modified getSourceListMimeTypes() to include FXG mime type.
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-22197
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/WebTierAPI.java -
[svn:fx-trunk] 12982: Fix for issue with exposing accessible names for combobox list items
Revision: 12982
Revision: 12982
Author: [email protected]
Date: 2009-12-15 20:44:23 -0800 (Tue, 15 Dec 2009)
Log Message:
Fix for issue with exposing accessible names for combobox list items
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ComboBoxAccImpl.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ListBaseAccImpl.asAdd this to the end of your nav p CSS selector at Line 209 of your HTML file, after 'background-repeat...':
margin-bottom: -2px;
Your nav p will then look like this:
nav p {
font-size: 90%;
font-weight: bold;
color: #FFC;
background-color: #090;
text-align: right;
padding-top: 5px;
padding-right: 20px;
padding-bottom: 5px;
border-bottom-width: 2px;
border-bottom-style: solid;
border-bottom-color: #060;
background-image: url(images/background.png);
background-repeat: repeat-x;
margin-bottom: -2px; -
How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing
We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?
Personally, I would never use a debit card online, for security reasons. If your card gets hacked its your money that is stolen. At least with a credit card it is the card providers money that is stolen.
Anyway, I would delete the app and re-install. If you paid for the app in the first place you will be able to re-install free of charge. Also, the app should allow the in-app purchase to happen again as it should recognise that you have already purchased it previously.
Finally, it might be that the 3G doesnt have as much ram as more recent models of iphone and you may have applications running in the background that are preventing the app to function with the in-app purchase unless you shut down any apps eating all you memory that are running in the background. Shut-down these apps (and the simpson tap out app) by exiting to your home screen and double-tapping the home button to show what apps are running in the background. press and hold any of the open apps until it starts shaking. close all the apps down. exit then re-launch the app.
good luck. -
Hey Apple when are you going to fix the problems with IOS 8.3??
Hey Apple when are you going to fix the problems with IOS 8.3??
Message is working weird.
I don't have internet service when I'm away from my WiFi, because my phone won't use LTE now.
Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
If there's a fix coming when will we see it?
(I'm using iPhone6 plus)
I've tried everything else to fix the problems I'm having. Soft restart. Hard restart. Used your chat line. Called Verizon. Reset network settings.... Help!!!!!
I've posted on the Apple Communities about all this and I've sent in a couple of bug reports.
I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!I have a Verizon iPhone 6 and am having none of those problems.
SueMac wrote:
Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
Didn't they already have you do that? If you haven't, yes, you should restore your phone as new and test.
I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!
If you are in a situation where you may need emergency information, organizations such as the Red Cross recommend things like this:
http://www.amazon.com/Epica-Emergency-Digital-Flashlight-Certified/dp/B00CZDT30S /ref=sr_1_1?ie=UTF8&qid=1429463666&sr=8-… -
We have version 10.5.8 photoshop CS3 for Mac. How do we fix a problem with photoshop not resizing dpi? For example we resized a 72 dpi image to 200 dpi, when we do a pdf analysis it read as 344 dpi.
Sounds like it's a problem with the Acrobat settings. Did you set them to the same resolution?
-
Has Apple fixed the problem with 4G cellular connection?
Has Apple fixed the problem with 4G cellular connection on the iPad 3?
Cellular connection problem was for US connection in Houston, Texas. Have an iPad 2 which functions perfectely on Wi-Fi or 3G. Bought an iPad 3 strictly to get the increased speed from the 4G LTE connection. Purchased on with the AT &T cellular. Wi-Fi functions fine, but 4G LTE connection is terrible when it connects at all. Went to AT&T and they said no problems with service in my area, but never get over 2 bars and most times, Web pages load very slow or will hang and not load at all. Went to the Apple store and they said it was AT&T network problem and went to AT&T and they said no problems with their service. Went to the Apple communities forum here and discovered that many people were having the same problems with the 4G LTE cellular connection on their iPad 3's. Didn't seem to matter if it was AT&T or Verizon. So I decided that I would just return the unit and wait for Apple to fix the problem. Hence my question.
Appreciate very much your time in responding to my question. -
iTunes needs to fix the problem with there iTunes cards not activating properly! This is not the retailers fault and they will not return iTunes cards that have had the code area scratched there for apple needs to credit and or activated the cards there is thousands of people having this problem please bite the bullet and fix it already I will not be using iTunes until this is corrected...
If you haven't received the item then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
QT 7.4.5 did **not** fix the problem with some .mp4s
It has been 3 versions now - 7.4, 7.4.1, 7.4.5 - since Apple broke the ability of QuickTime Player to play some .mp4 files. Apple says it is because they have some kind of malformed headers, yet they play fine in iTunes. So why can't QT Player play them, and some people report they have problems when put into Keynote?
Apple has broken functionality for lots of users. Time and again this bug has been brought to their attention. It apparently is a design decision not to fix this, and it is a big disappointment.The story so far:
If you are having problems playing MPEG4 video in Quicktime 7.4 (and Apple are aware that some users have had such problems) you should carefully check in
/Library/Quicktime and
/Library/Internet Plug-ins and
Home/Library/Quicktime
to check whether you have any third party plug-ins that are not completely up to date.
Current versions of Flip4Mac and DiVX and Perian do NOT cause failure alone or in combination. However the one SPECIFIC extension that ALWAYS causes the failure alone or in groups is 3ivxMediaImp. All other 3ivx extensions DO work. Remove only that ONE SPECIFIC extension.
Please try this and see if it fixes your problem with QT Player, the QT Firefox Plugin, and iTunes not playing MPEG4 files (including mp4 files).
Older 3ivx and DivX components are often incompatible with new QuickTime versions and are, in many cases, obviated by component packs like Perian.
This is not the only explanation for issues with MPEG4 file playback in QuickTime 7.4 and later, however. The issue with videos from democracynow.org and others, for instance, is the result of that content not complying with MPEG4 standards (namely that they use bogus track dimensions). QuickTime had previously ignored invalid track dimensions but this was changed in order to support properly authored anamorphic content.
The recent update to QT 7.4.1 fixed a number of issues but some problems are unavoidable when working with non-standards compliant content. The standards are important for many reasons including keeping hackers from manipulating improperly coded web pages.
A further problem was the fact that the developers of iSquint conceded that in many cases, the files do not play because they have been created in a non-standard way (the tool used to create them was broken). They have therefore included a Debreaker as a part of the latest version of iSquint. If your files are of this type, then you can run them through this app without having to downgrade QuickTime. This could save you a lot of hassle!
http://www.isquint.org/getit.php
However, in other cases, there is a workaround (also the basis for why those files will still play in iTunes): there are a few ways to trick QuickTime into ignoring the invalid track data. For instance, rename the files .3GP and they'll show up just fine.
Post back if you want a list of the plug-ins you should have in order to play pretty much anything in Quicktime.
The recent (mostly security) update to Quicktime 7.4.5 has not changed the situation as described. -
I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?
- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- Try the remaining items of:
iOS: Troubleshooting applications purchased from the App Store -
WHEN or HOW to fix the problem with Thunderbolt/Side screen problems
WHEN or HOW to fix the problem with Thunderbolt/Side screen problems (Cinema screen). Keeps blinking on & off then eventually completely off. Would have thought Apple would have fixed the problem by now as it is apparently to do with the Thunderbolt connector!.
Hello, might it be Video card related?
See if yours is on the recall list...
iMac (27in): AMD Radeon 6970M Video Card Replacement Program (del 'mid 2011')
http://xlr8yourmac.com/
http://support.apple.com/kb/TS5167? -
How to fix underscan problem with footage
I am trying to help a friend fix a problem with some footage he shot. A client was standing in front of a painted matte. The footage was shot,(and cannot be re-shot) and once back in the studio he found that a the edge of the matte that is not painted is showing up beyond the TV safe area. It can be seen on a computer screen and if shown thru a projector. The viewfinder of his camcorder did not show this problem.
So how can we fix it? It is a narrow band of white on the left side of the screen. The problem is that part of some leaves cross over it and out of frame. We have tried just simply scaling it up to get beyond the white edge but the picture quality begins to degrade. We have to fix this using FCP since that is all that is available to us. The clip is fairly long so we probably won't have the time to fix it in Photoshop.
Any help is greatly appreciated.
He is using FCP4.5 on a dual processor G5.
Thanks!
YmirThe cropping would leave a black bar. Something I was thinking about doing has cropping involved. I thought about duplicating the clip and stacking it over the original clip. Then crop it as suggested and then scaling the clip underneath and apply a Gausian blur. This would eliminate the white edge. Problem is, I have a hard line where the cropping took place. If there was some way to just feather the left edge of the crop.
My friend thinks some type of masking needs to take place where we could just re-color the white bar but as of yet we haven't discovered how to go about it.
Thanks for the suggestion,
Ymir -
I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.
I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.
Maybe you are looking for
-
No active nametab exists for...
Hi, I try to maintain BOM data by CSAP_MAT_BOM_MAINTAIN bapi. Everthing works ok when I use example code of this function module. But when it comes to terms deleting an item from BOM, I always get error : "No active nametab exists for CI_STPO". But i
-
SOS Only - cannot connect to network
My phone now only shows "SOS Only". I've been reading many threads related to this issue, and tried lots of methods to solve the problem, but so far no luck. Details: iPhone 4 iOS 5.0.1 iTunes 10.5.2 Carrier: Virgin Mobile 11.0 (Australia) phone was
-
How can I show tree's nodes in a Popup List of values
I have a tree and in a different form for an item I want to write nodes together for example computer/desktop/asus/.... computer/pda/hp/... this must be shown in a popup list of values can you help? thanks
-
I want to know if I can update apps without signing in to edit my credit card information.
-
Right format on a date, need help
I get a dateparameter from my jsp. This is in format "dd.MM.yyyy". When I parse it to a date the result is e.g: Sun Feb 10 00:00:00 GMT+01:00 2002. How can I get this to be in the preferred format (dd.MM.yyyy)? My code is: SimpleDateFormat formatter