Swap Image not working Except in IE

I am working on a class project, and we've just learned how
to do "swap image" on rollover. It's working beautifully when in
IE, but in Firefox it's not working at all and in Opera it's
working strangely (only when on the "edges" of the flash text not
when rolling over the flash text) Any ideas as to the problem? The
flash text rollover works (changes colors), but the "bubbles" are
supposed to swap images. BTW, I thought it might be a setting in my
browser disabling something, but the swap image on classmates'
sites show up fine.
http://198.86.244.3/drsimpson/WEB140/drsimpsongallery/
Thanks

I can't see what is the problem. :-(
Try replacing your flash buttons with plain gif images, it
works the same way and you will have much less code on your page. I
don't think the problem is there but you can always try.

Similar Messages

Swap image not working in IE on server

Hi
suddenly having problems with this - whether it's Win SP2 or
what I'm not sure. swamp image works fine locally (off a network
LAN drive) but not on the live server. I have preload images set,
not restore on mouseout. The setup is an imap with a hotspot but I
had the same thing happen on a plain image - no errors come up,
just a blank spot where the image is not swapping.
Any help appreciated
RG

Very difficult to troubleshoot without seeing the code.
Regards
John Waller

Swap image not working in CS3

I have used the >insert>rollover image in CS3 to create
rollovers for the website below. I can't get any rollovers to work
in preview or live on the server. Any ideas?
http://www.gardenclubofwindham.org/test.html
- it should have a little trowel show up next to the menu items
like the link below...
http://www.gardenclubofwindham.org/index.html
- I did these rollovers using phototshop cs/ image ready.
Thank you!

LOL. Glad I could help.
The problem is this -
Much 'wizard' based javascript is written into the page like
this -
<script type="text/javascript">

The javascript code is put inside double comments (the outer
ones are for
HTML, and the inner ones for javascript). In fact, neither
are appropriate
when working with an XHTML doctype, and I'm pretty sure the
others are not
really needed ever, but it's tradition....
Your error was caused when the trailing comments are
incompletely removed
leaving that "/" in place....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"rcronin2006" <[email protected]> wrote in
message
news:g5feqf$g9u$[email protected]..
> Well, I wonder if I am having some javascript problems
with DW, I just
> posted
> another mystery in this same forum. I can't understand
how my copy of DW
> could
> have a glitch. That seems so unlikely. I haven't used IR
for a site
> build in
> many months, but I could see how that code could get
wacky - the sites
> I've
> done with it are very "sensitive", lol. If I touch
anything, the whole
> page
> goes haywire. Anyways thanks again, you made me look
"wicked-smat" to my
> client. :)
>
>
>

Rollovers and swap images not working

since i've upgraded to Dreamweaver CS3 i've not been able to create rollovers.. i need to now
is there a bug? a patch that i need? what is going on? I need help please - been able to make do with flash buttons & text until this job.
Running Mac OS10 - if it helps.. these pages were originally designed in go-live and redesigned since - / i wonder if i'm holding my tongue in the correct position. be gentle with your answers - i'm a graphic designer not a web guru

here is the code to three of the rollovers.. it's tabs
i even thought that if i went ahead and uploaded it might work online.. no such luck
<td height="38" colspan="2" align="center" valign="middle"><spacer type="block" width="1" height="379">
                  <spacer type="block" width="1" height="1">
                  <a href="index.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('home','','images/tabs/rimtymehomeover.jpg',1)"><img src="images/tabs/rimtymehome.jpg" alt="Home Page" name="home" width="154" height="38" border="0"></a></td>
            </tr>
            <tr height="38">
              <td height="38" colspan="2" align="center" valign="middle"><a href="malone.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('aboutus','','images/tabs/rimtyme_about_over.jpg',1)"><img src="images/tabs/rimtyme_about.jpg" alt="About us page" name="aboutus" width="154" height="38" border="0"></a></td>
            </tr>
            <tr height="38">
              <td height="38" colspan="2" align="center" valign="middle"><a href="storephotos.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('storegallery','','images/tabs/rimtyme_storephotos.jpg',1)"><im g src="images/tabs/rimtyme_storephotos_over.jpg" alt="Click here for images of each of our locations!" name="storegallery" width="154" height="38" border="0"></a></td>
            </tr>
            <tr height="38">
              <td height="38" colspan="2" align="center" valign="middle"><a href="credit.html"><img src="images/tabs/rimtyme_getstarted.jpg" alt="GETTING STARTED" width="154" height="38" border="0"></a></td>
            </tr>
            <tr height="38">

I was downloading podcast video in my itouch using wifi, but suddenly my wifi got disconnected and now there is a link in my podcast list which on opening uses wifi to play that video. I want to delete that link. Right to left swapping is not working.

I was downloading podcast video in my itouch using wifi, but suddenly my wifi got disconnected and now there is a link in my podcast list which on opening uses wifi to play that video. I want to delete that link. Right to left swapping is not working.

I bet this is too late but...
Are you trying to print through the airport express wirelessly or the built in wireless of the lexmark? If you want to use the airport express, there is no need to mess with the wireless printing on the lexmark at all. The airport express will be easy to set up, all the wireless setups through the printers are a pain.

Brand new 15" MacBook Pro Retina - unplugged from Thunderbolt Display and Keyboards today find keyboard alpha-numerics not working; except the function keys, delete key, tab key, command/ctrl/shift/alt/fn and arrow keys; and 7/8/9/u/o/j/l nudge cursor

Brand new 15" MacBook Pro Retina - unplugged from Thunderbolt Display and Keyboards today find keyboard alpha-numerics not working; except the function keys, delete key, tab key, command/ctrl/shift/alt/fn and arrow keys; and 7/8/9/u/o/j/l produce cursor nudges.

It's a new machine - and the Thunderbolt Display is meant to work with it. You need to just make an appointment at your local Apple Store and have them fix whatever is wrong.
If you like, you could always try a SMC reset and a PRAM/NVRAM reset to see if either of those will get your keyboard back in working order...
Clinton

RH 8 Shed images not working

1. Shed images not working as of Nov. 12 2009

Hi all
Thanks for all the info - but I'm still stumped. I have tried generating my .chm
files to the default SSL folders, manually copying all the child chms to the SSL
folder for the master project, letting RH copy them, generating all chms to an
external folder... no matter what I do, every time I recompile the master
project it picks up random old stuff. I have checked and rechecked that my
merged TOC items are to the latest child chms...
Sometimes when I recomplie the master project, even the content in that reverts
back to a previous version, sometimes it doesn't...
I have looked at the Merged Files list in the hhp file, I have deleted this file
and started my merge from scratch, I have manually deleted some paths (some
paths are to directories on the server where any files for this project have
long since been deleted...) directly in this file, but again every time I
recompile the master project it picks up random old versions of the child chms (
and the huge list of old merged files are put back in the hhp file. Even when I
delete all chms from all locations in the folder I'm working in on my C drive,
delete all the merged TOC items from the master project, save it, and
recompile it, the list of old merged files reappears in the hhp file).
Any more thoughts gratefully received:-)
Also - I don't have a Baggage Files folder??
One more thing... If I delete ALL the files under Merged Files in the hhp file using HTML Help Workshop, it crashes

Google Images not working in Safari on Iphone

Since a while back the "images"-tab in google does'nt work on the iPhone in any of the browsers I've tried. I've searched the net to find others with the same problem but with little luck. Here's a description of the problem.
For example I search for "dog" in google in the Safari browser, this works just fine.
Then I press the "images"-tab and get a thumbnail view with pictures of dogs, of course.
But this is where it all goes wrong, when touching one of the images I get an enlarged view of an image next to it. The "back to the results" and "full image" buttons dim out (without being touchable) and swiping does not work. I don't know what has caused this to stop working properly, I know its not the new iOS version though.
HERE is a youtube video I prepared that explains the problem.
First, is there anyone else out there with this problem?
Second, this is what I've tried:
- Other iPhone web browser applications, for example "Mercury", "Opera Mini", "Skyfire" and none of them works except "Dolphin" (good work).
- Resetting any of the settings in the phone, clearing cache and such have no effect.
- Resetting the iPhone totally, factory settings. No effect.
- Using someone elses iPhone. I've tried on an iPhone 4 and iPhone 3S, same problems (with iOS 5.01).
- Trying out all of the settings in google, no change.
- Setting the google view to "classic" instead of "mobile" works of course, but that makes the site look just like on a PC or Mac and is not what I'm after.
Third, this problem seems to just affect Swedish users from what I can tell. There would be thousands of posts about this if everyone in the world was affected by it, but so far I've seen no posts on this matter. But after searching a while I found a swedish forum site on the subject. Link (in swedish). Also, when visiting google from Sweden some form of script automatically changes the url from .com to .se. I don't know if this has something to do with it?
Anyone know what causes this problem and how It might be resolved?
Best Regard
Stefan, Sweden

Hi Stefan,
First; this must be the most thorough error discription I have ever seen. Impressive.
Second; yep for a couple of weeks now I've been having exactly the same problems as you describe. One other thing that I've noticed, is that for me, the 'word suggestion drop down list' or whatever it's name is, no longer works. More specificly:
I open Safari in my iPhone, surf to Google image search and type for example "dog" in the search field. Below the field, I now get a list of suggested words or phrases that I think is based on the most popular searches. For me, the first suggestion in this list is "dogo argentino" (a specific and popular breed of dogs). When I tap on the words "dogo argentino", the search field normally would switch input from "dog" to "dogo argentino" AND starts the image search automatically. However, since the problem showed up, when I tap on "dogo argentino" the input field is not affected (still reads "dog") and I would have to type "dogo argentino" manually and hit "search".
I use a Swedish iPhone 4S (5.0.1 (9A406)) in the Telenor network. I also have tested the same possible solutions that you describe in your post, but with no luck.
All the best,
Ingo

Two Swap Image Behaviors - Only One Swap Image Restore Works

How come?
I have a button image with a two swap image behaviors applied to it - a rollover for the OVER state and one behavior for a disjointed or "remote" rollover effect.
Both rollover effects work fine, but the disjointed or remote rollover effect does not return the button to it's original state. (I've determined this by removing the second or remote swap image behavior and testing it.)
Why doesn't this work?
All scripts are contained within the HTML page itself; no linked scripts are used.
Thanks!

Page code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>index</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<script type="text/javascript">

</script>
<style type="text/css">

</style></head>
<body bgcolor="#FFFFFF" onLoad="MM_preloadImages('images/navigation_2_over-05.gif','images/navigation_2_over-06.g if','images/navigation_2_over-07.gif','images/navigation_over-08.gif','images/navigation_o ver-09.gif','images/navigation_over-10.gif','images/team.gif','images/forms.gif','images/e xport.gif','images/consulting.gif','images/programming.gif','images/contact.gif')">
<table width="792" border="0" align="center" cellpadding="0" cellspacing="0" id="Table_01">
<tr>
<td width="792" height="126" colspan="2">
   <img id="index" src="images/index.gif" width="792" height="126" alt="" /></td>
</tr>
<tr>
<td width="792" height="34" colspan="2">
<table id="Table_01" width="792" height="34" border="0" cellpadding="0" cellspacing="0">
<tr>
<td width="34" height="34">
   <img src="images\navigation_2.gif" width="34" height="34" alt="" /></td>
<td width="426" height="34">
   <img src="images\navigation_2-02.gif" width="426" height="34" alt="" /></td>
<td width="105" height="34" id="title">
   <img src="images\blank.gif" alt="" name="blank" width="105" height="34" id="blank" /></td>
<td width="5" height="34">
   <img src="images\navigation_2-04.gif" width="5" height="34" alt="" /></td>
<td width="36" height="34">
   <img src="images\navigation_2-05.gif" alt="" width="36" height="34" id="Image1" onMouseOver="MM_swapImage('Image1','','images/navigation_2_over-05.gif',1);MM_swapImage(' blank','','images/team.gif',1)" onMouseOut="MM_swapImgRestore()" /></td>
<td width="32" height="34">
   <img src="images\navigation_2-06.gif" alt="" width="32" height="34" id="Image2" onMouseOver="MM_swapImage('Image2','','images/navigation_2_over-06.gif',1);MM_swapImage(' blank','','images/forms.gif',1)" onMouseOut="MM_swapImgRestore()" /></td>
<td width="31" height="34">
   <img src="images\navigation_2-07.gif" alt="" width="31" height="34" id="Image3" onMouseOver="MM_swapImage('Image3','','images/navigation_2_over-07.gif',1);MM_swapImage(' blank','','images/export.gif',1)" onMouseOut="MM_swapImgRestore()" /></td>
<td width="33" height="34">
   <img src="images\navigation_2-08.gif" alt="" width="33" height="34" id="Image4" onMouseOver="MM_swapImage('Image4','','images/navigation_over-08.gif',1);MM_swapImage('bl ank','','images/consulting.gif',1)" onMouseOut="MM_swapImgRestore()" /></td>
<td width="31" height="34">
   <img src="images\navigation_2-09.gif" alt="" width="31" height="34" id="Image5" onMouseOver="MM_swapImage('Image5','','images/navigation_over-09.gif',1);MM_swapImage('bl ank','','images/programming.gif',1)" onMouseOut="MM_swapImgRestore()" /></td>
<td width="42" height="34">
   <img src="images\navigation_2-10.gif" alt="" width="42" height="34" id="Image6" onMouseOver="MM_swapImage('Image6','','images/navigation_over-10.gif',1);MM_swapImage('bl ank','','images/contact.gif',1)" onMouseOut="MM_swapImgRestore()" /></td>
<td width="17" height="34">
   <img src="images\navigation_2-11.gif" width="17" height="34" alt="" /></td>
</tr>
</table>
td>
</tr>
<tr>
<td width="410" height="352">
   <img id="index003" src="images/index-03.gif" width="410" height="352" alt="" /></td>
<td width="382" height="352">
   <img id="index004" src="images/index-04.gif" width="382" height="352" alt="" /></td>
</tr>
<tr>
<td width="792" height="29" colspan="2">
   <img id="index005" src="images/index-05.gif" width="792" height="29" alt="" /></td>
</tr>
</table>
</body>
</html>
I can't publish the page and images until later tonight.
Thanks, as always.

Swap Image NOT mouseover

I am trying to swap images in Dreamweaver so when a user goes
to my website, the images swap automatically. I have 4 images that
I want to swap and I want them to change every 7 seconds. I don't
want the user to have to mouseover or click anything, i want the
images to change automatically. I can't get this to work right in
Dreamweaver. It always only swap to 1 image and it never goes back
to the original image.
Also, the images are different sizes and I want them to stay
different sizes. I have 4 images, I want the images to swap every 7
seconds and then restore back to the original image. I want them to
keep swapping every 7 seconds, or I might just want them to swap
through the 4 images once and then restore to the original image
and not swap anymore after that. Can you help me with both of these
scenarios please?

1. Make the images to all be the same size by adding canvas
to the shorter
dimensions in your graphics editor.
2. Once you have done this, use an image rotator script to
make the images
rotate. You can find such things in many places on the web -
from free to
commercial. I have used SlideShowMagic from PVII,
http://www.projectseven.com/,
and the image rotation script from KaosWeaver,
http://www.kaosweaver.com,
before and found them both to be excellent for
this purpose....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"originalit" <[email protected]> wrote in
message
news:f859tu$5v9$[email protected]..
>I am trying to swap images in Dreamweaver so when a user
goes to my
>website,
> the images swap automatically. I have 4 images that I
want to swap and I
> want
> them to change every 7 seconds. I don't want the user to
have to mouseover
> or
> click anything, i want the images to change
automatically. I can't get
> this to
> work right in Dreamweaver. It always only swap to 1
image and it never
> goes
> back to the original image.
>
> Also, the images are different sizes and I want them to
stay different
> sizes.
> I have 4 images, I want the images to swap every 7
seconds and then
> restore
> back to the original image. I want them to keep swapping
every 7 seconds,
> or I
> might just want them to swap through the 4 images once
and then restore to
> the
> original image and not swap anymore after that. Can you
help me with both
> of
> these scenarios please?
>

Links to images not working when saving to JAR

Hi
Okay Ive created a Java GUI app with Eclipse and it all works fine until I try to save it to JAR.
Basically the images don't load.
grassIcon = new ImageIcon("images/grass.jpg");
antIcon = new ImageIcon("images/ant.jpg");
lionIcon = new ImageIcon("images/lion.jpg");
is what I am using so the images are in a folder named "images".
I've checked the JAR file and it does contain the folder with the images and it looks like everything else is running.
Cheers for any help with this.
Aden

I have the same problem with my java application
no html and images files are displayed for the jar
though the application works normally
I tried your suggestion but I received an exception thread indicating problem at
ImageIcon iChing = new ImageIcon(imageURL);
Please could you help me thank you so much
here is the class
public class Main extends JFrame
* objects required for the GUI: JFrame,JLabel, JButton, ImageIcon, JPanel,
* Dimension
private static final long serialVersionUID = 1L;
JButton jbEnter;
ImageIcon iChing, logo;
JPanel buttonPanel, ImagePanel;
JLabel jlbIching;
Dimension dim;
URL imageURL;
File fileName;
// Class constructor to create the GUI
public Main()
     Container container = getContentPane();
     URL imageURL = this.getClass().getClassLoader().getResource("src/myFiles/iching.gif");
     ImageIcon iChing = new ImageIcon(imageURL);
     jlbIching = new JLabel(iChing);
     // button to go to the Title class
     jbEnter = new JButton("Enter ");
     jbEnter.setBorderPainted(false);
     jbEnter.setFont(new Font("Edwardian Script ITC", Font.BOLD, 42));
     jbEnter.setBackground(new Color(0, 0, 50));
     jbEnter.setForeground(Color.YELLOW);
     jbEnter.addActionListener(new ActionListener() {
          // method to render the current frame invisible and trigger the
          // Welcome Menu
          public void actionPerformed(ActionEvent e)
          setVisible(false);
          // this line does not work...............
          new Title();
          } // close the actionPerformed(ActionEvent e) Method
     }); // close the addActionListener(new ActionListener() method
     // Panel holding the decorative image and Button
     ImagePanel = new JPanel();
     ImagePanel.add(jlbIching);
     ImagePanel.setBackground(new Color(0, 0, 50));
     buttonPanel = new JPanel();
     buttonPanel.add(jbEnter);
     buttonPanel.setBackground(new Color(0, 0, 50));
     // setting up of the panels position
     container.add(ImagePanel, BorderLayout.CENTER);
     container.add(buttonPanel, BorderLayout.SOUTH);
     dim = Toolkit.getDefaultToolkit().getScreenSize();
     dim.width = dim.width / 2 - 300;
     dim.height = dim.height / 2 - 250;
     setBounds(dim.width, dim.height, 400, 400);
     setSize(600, 500);
     setResizable(false);
     setVisible(true);
     setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     //To set the icon for the application. Top left hand corner.
     //this.setIconImage(Image);
     setIconImage(new ImageIcon("src/myFiles/ichingRose.gif").getImage());
     } // close the Constructor
* the main method for the program.
* @param args
* The command-line arguments.
public static void main(String[] args)
     new Main();
} // close the main method
} // close the Main class

Why is code to get center of image not working?

Hey there. I have am trying to establish the center of the imags that load so that I can put them in the center of the stage. I am doing this as each image is a different size.
Here is the code i have gotten to work before but its not working now and I have been searching to find what I have done wrong with no luck. : (
Would you look it over and maybe you will see what I am doing wrong?
public function placePicture(e:Event = null):void {
     rawImage = imageData.image[imgNum].imageURL;
     lastImageIndex = imageData.*.length() - 1;
     imageLoader = new Loader;
     imageHolder = new Sprite;
     imageLoader.load(new URLRequest(rawImage));
     imageLoader.x -= imageLoader.width/2; //this should set the image to the center no?
     imageLoader.y -= imageLoader.height/2;
     imageHolder.x = 640; //this is the center of the stage
     imageHolder.y = 100;
     imageHolder.addChild(imageLoader);
     masterHolder.addChild(imageHolder);
The result when I publish is the picture comes on stage but the top left corner goes to 640 instead of the center of the image going to 640.
I tried several variations of this all with the same result:
imageLoader.x = -1*imageLoader.width/2;
I tried using setRegistrationPoint with the following tutorial: http://flashscript.ca/set-registration-as3.php
and I tried doing all of the above by inserting the loader into a sprite and then applying the code to the sprite and then adding that sprite to another sprite and putting that at 640 and not inserting it in another sprite and trying to straight up put the existing sprite at 640 (hopefully that all makes sense). And I have tried to put it to width/3 and nothing different happens.
If you have any other ideas or can see what I am doing wrong I would really be gratefull for some tips! : )
Thanks for any help!
oh, and I am getting no errors on this.

the image's width and height are not available until loading is complete. ie, use a complete listener/listener function.

Anychart save as pdf/image not working

A while ago I posed this question when the right click, save as stopped working on my APEX charts
Apex charts - right click, save as image (not responding)
The problem resolved when anychart.com was back up, but the problem is occurring again and I wonder if they've moved their php files. Not even in Hilary's sample app is working. We think this happened within the last month.
After choosing save as image and a location, the "saving" just keeps spinning.
Most anychart google results at the moment seem to revert to the same landing page, and webcached copies refer to locations that no longer exist.
I wonder with post anychart7 cleanup, have they moved the supporting php files? For instance, this location no longer exists
http://www.anychart.com/products/anychart/saveas/pdf/PDFSaver.php
A workaround is to use a local copy of the php file with custom XML
<settings>
<pdf_export file_name="mychart.pdf" use_title_as_file_name="true" url="/i/AnyChart4_SaveAsPDF_php4/PDFSaver.php" image_type="jpg" />
But I only have the PDFSaver, not the AnyChartPNGSaver.php
This file no longer exists either:
http://anychart.com/products/anychart/docs/users-guide/export_image_scripts/php.zip
Does anyone know where I can source the png saver php, or suggest another workaround? Or have any other information on this issue.
An email to [email protected] back in 2013 got no reply.
APEX 4.2.0
Scott.

Hi Scott,
So, if i understand properly, making this change
<settings><pdf_export file_name="mychart.pdf" use_title_as_file_name="true" url="/i/AnyChart4_SaveAsPDF_php4/PDFSaver.php" image_type="jpg" />
will avoid atleast PDF issue? And as i dont have privileges to install or deinstall anything on /i/ folder, still this will work and URL path will remain same for each installation?
Adding another question, as you said "it sends base64 information when converting to PDF", does it mean i will not be able to convert to PDF, if i am using intranet and PC's not accessible to internet?
Thanks
Sunil Bhatia

Splash image not working in JNLP

Hi all...
Splash image is not get displayed in my Application..
Here is my JNLP file.
<jnlp spec="6.0+" codebase="http://localhost:8080/MyProject/">
<information>
    <title>MyProject1.0</title>
    <vendor>My Company.</vendor>
    <homepage href="null"/>
    <description>Application Launcher For MyProject1.0</description>
    <icon href="http://localhost:8080/MyProject/images/Splash_MyProject.jpg" height="300" width="560" kind="splash"/>
    <offline-allowed/>
</information>
<security>
    <all-permissions/>
</security>
<update check="timeout" policy="always"/>
<resources>
    <java version="1.6"/>
    <jar href="http://localhost:8080/MyProject/SwingApplication/mysql-connector-java-5.0.6-bin.jar" download="eager" main="false"/>
    <jar href="http://localhost:8080/MyProject/SwingApplication/MyProject1.0.jar" download="eager" main="true"/>
    <jar href="http://localhost:8080/MyProject/SwingApplication/liquidlnf.jar" download="eager" main="false"/>
</resources>
<application-desc main-class="com.mycompany.ui.MainWindow">
    <argument>production%0%3#com.mysql.jdbc.Driver#MyProject4%jdbc:mysql://10.100.1.89:3306/MyProject4%MyProject%info123#MyProject2%jdbc:mysql://10.100.1.89:3306/MyProject2%MyProject%info123</argument>
</application-desc>
</jnlp>Splash image not get displayed and then I change *<java version="1.6"/>* to *<java java-vm-args="-splash:resource/images/Splash_MyProject.jpg" version="1.6"/>*
still splash image not get shown on application startup..
no java.awt.SplashScreen() class instance found.
Plz anybody give some idea...

I have also a problem with the splash screen not displaying. This is the first relevant portion of the jnlp:
<jnlp spec="1.5+" codebase="http://www.i-modulas.nl/downloads/"
href="imodulas.jnlp">
<information>
<title>i-Modulas Thin Client</title>
<vendor>i-Modulas Software BV</vendor>
<icon kind="splash" href="http://www.i-modulas.nl/downloads/javathinsplash.jpg"/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+"/>
<jar href="isrun.jar"/>
<property name="iscobol.conf" value="http://www.i-modulas.nl/downloads/javaclientproperties.txt"/>
</resources>
<resources os="Windows">
<property name="swing.defaultlaf" value="com.sun.java.swing.plaf.windows.WindowsLookAndFeel" />
</resources>
<resources os="Linux">
<property name="swing.defaultlaf" value="com.sun.java.swing.plaf.gtk.GTKLookAndFeel" />
</resources>
The application starts normal and uses a different look and feel under Windows as under Linux, but I do not see the splash screen. I tried different ways of referencing to the picture and I also tried using a .gif format. It never worked!
Any suggestions are welcome!
Ren�

Copy and Paste of Images NOT working.

When I right click on an image and choose 'copy image' and then try to paste it into my editing software, all i get is a string of text that is the location of the image as if I had chosen 'copy image location' instead. what gives?

I too was unable to copy & paste ''IMAGES'' suddenly. This function continued to work correctly in my Internet Explorer and Chrome browsers while not working in Firefox. (I WAS able to copy & paste ''''TEXT'''' however in all 3 browsers.)
As described by another poster, I would click on "Copy image" as I always did, but instead of the image appearing when I clicked paste, the ''URL'' of the image appeared instead.
My computer developed this problem suddenly yesterday after downloading and installing the newest version of Firefox, which is 12. I tried some of the suggested solutions here to no avail, but I strongly suspected the problem was with Firefox 12. To test this, I re-installed Firefox 11 and immediately my copy & paste function started to work correctly once again and I am now able to copy & paste images once again.
I will not install Firefox 12 again until Firefox corrects this problem. I need this function and do not want to have to deal with a convoluted method of saving a graphic with unnecessary extra steps, thank you. Every single time I upgrade Firefox, something is incompatible with the new version and no longer works. This is always a nuisance, especially when it is my Norton toolbar.
This time it was my copy & paste function (again, for images only.) Anyone else with this problem should re-install Firefox 11 to see if their copy & pasting of images function is suddenly restored, as mine was. Good luck! :)

Swap Image not working Except in IE

Similar Messages

Maybe you are looking for