Publisher Admin tab not available

I'm trying to setup the BI publisher.
When I access the publisher, I can't see the Admin tab. I can't create any report. Basically, I can't do anything.
I have already allow the access to the publishser to Everyone.
Anything that I need to do to enable the publisher to work?

Hello,
is the version of OBIEE that you're using 10.1.3.3.0?
I have this problem when I'm using this version. When I upgrade to a higher version this problem didn't happen again.
If you couldn't upgrade your version try to execute the cryptotools utility.
Also, check if the 'xmlp-server-config.xml' file (at $OracleHome\OracleBI\xmlp\XMLP\Admin\Configuration) has the entry <property name="SAW_USERNAME" value="Administrator"/>

Similar Messages

Admin tab not available on the BI publisher

I have installed OBIEE , to get a practice on BI Publisher. I launch BI Publisher with the user / password (Administrator/Administrator) . I am getting BI Publisher screen without admin tab. Please help me how can i get Admin tab.
I could have upload the screen shot, but dont know how to do it .

Hi,
Modify the file xmlp-server-config.xml in \OracleBI\xmlp\XMLP\Admin\Configuration with the following contents and check.
<property name="SUPERUSER_PASSWORD" value="Give Some Password"/>
<property name="SUPERUSER_USERNAME" value="Admin"/>
<property name="SECURITY_MODEL" value="XDO"/>
Restart OC4J and log in either with Administrator or the Admin id created above.
I hope this will work
Regards
Raj

The requested resource (/Admin) is not available.

Hello ,
I am developing one small project. I am using struts,EJB and Hibernate to develop this project.
My project name is Admin. It has two sub-modules:- AdminWeb and AdminEJB.
In the sub-module AdminWeb, i am writing all the struts related stuff like Action classes,form bean classes, I have struts-config inside WEB-INF folder along with web.xml and other tlds. From the action class i am takinf the lookup of session bean which is in the another sub-module name as AdminEJB. and invoking the business method from of that bean class.
In the sub-module AdminEJB, I wrote all my Home Interface, Remote Interface and Session Bean class.From the session bean class i am firing a HQL query to interact with Database. I create Hibernate.cfg.xml and also mapping xml file needed to map with the database.Then i created ejb-jar.xml file.
I created EAR file name as Admin. And deployed in My JBoss server.
Now when i am running my project from web browser. then the following message is coming on the screen:-
The requested resource (/Admin) is not available.
Can anyone help me plz to recitify this problem.
Thanks with regard,
sanjay Kumar

Hello Again ,
The below the stack
16:13:59,189 INFO [StdSchedulerFactory] Quartz scheduler version: 1.5.2
16:13:59,189 INFO [QuartzScheduler] Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED started.
16:14:00,439 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=DefaultDS' to JNDI name 'java:DefaultDS'
16:14:01,017 INFO [A] Bound to JNDI name: queue/A
16:14:01,017 INFO Bound to JNDI name: queue/B
16:14:01,033 INFO [C] Bound to JNDI name: queue/C
16:14:01,033 INFO [D] Bound to JNDI name: queue/D
16:14:01,033 INFO [ex] Bound to JNDI name: queue/ex
16:14:01,064 INFO [testTopic] Bound to JNDI name: topic/testTopic
16:14:01,064 INFO [securedTopic] Bound to JNDI name: topic/securedTopic
16:14:01,064 INFO [testDurableTopic] Bound to JNDI name: topic/testDurableTopic
16:14:01,064 INFO [testQueue] Bound to JNDI name: queue/testQueue
16:14:01,142 INFO [UILServerILService] JBossMQ UIL service available at : /127.0.0.1:8093
16:14:01,189 INFO [DLQ] Bound to JNDI name: queue/DLQ
16:14:01,439 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=ConnectionFactoryBinding,name=JmsXA' to JNDI name 'java:JmsXA'
16:14:01,611 INFO [WrapperDataSourceService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=MyOracleDS' to JNDI name 'MyOracleDS'
16:14:01,705 INFO [TomcatDeployer] deploy, ctxPath=/jmx-console, warUrl=.../deploy/jmx-console.war/
16:14:03,220 INFO [EARDeployer] Init J2EE application: file:/E:/jboss-4.2.1/server/default/deploy/Admin.ear
16:14:22,250 INFO [EjbModule] Deploying DiscountDetailBean
16:14:22,688 INFO [ProxyFactory] Bound EJB Home 'DiscountDetailBean' to jndi 'Holiday_Cottage_Group/AdminEjb/ejbModule/com/discountEjbs/InsertDiscountDetailHome'
16:14:22,688 INFO [EJBDeployer] Deployed: file:/E:/jboss-4.2.1/server/default/tmp/deploy/tmp62976Admin.ear-contents/AdminEJB.jar
16:14:22,719 INFO [TomcatDeployer] deploy, ctxPath=/AdminWeb, warUrl=.../tmp/deploy/tmp62976Admin.ear-contents/AdminWeb-exp.war/
16:14:22,891 INFO [WebappClassLoader] validateJarFile(E:\jboss-4.2.1\server\default\.\tmp\deploy\tmp62976Admin.ear-contents\AdminWeb-exp.war\WEB-INF\lib\javax.servlet.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
16:14:22,922 INFO [WebappClassLoader] validateJarFile(E:\jboss-4.2.1\server\default\.\tmp\deploy\tmp62976Admin.ear-contents\AdminWeb-exp.war\WEB-INF\lib\servlet-api.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
16:14:23,578 INFO [EARDeployer] Started J2EE application: file:/E:/jboss-4.2.1/server/default/deploy/Admin.ear
16:14:23,719 INFO [Http11Protocol] Starting Coyote HTTP/1.1 on http-127.0.0.1-8080
16:14:23,750 INFO [AjpProtocol] Starting Coyote AJP/1.3 on ajp-127.0.0.1-8009
16:14:23,766 INFO [Server] JBoss (MX MicroKernel) [4.2.1.GA (build: SVNTag=JBoss_4_2_1_GA date=200707131605)] Started in 50s:810ms
Thanks with regards,
Sanjay Kumar

Web service is running but Server Admin says "Not available"

Hello,
I cannot configure the web service using the Server Admin tool any more. The service is running and showing no error, but the "Web" icon in the "Computer & Services" panel of Server Admin is showing dark grey color. The Overview tab of the Web Service is stating: "Web Service is: Not available"
Any ideas what I can do to get it work again?
sudo apachectl configtest gave no errors or warnings.
Mac OS X (10.4.7)

You should not be logging in as root, despite what anyone has told you.
And the entire mechanism of OS X Server (and most other *nix OS-en), is meant for you to not be logged in as root.
Use sudo and/or authenticate in the GUI when/where needed.
Please try Wesley's advise here:
http://discussions.apple.com/thread.jspa?messageID=2862670
Try launching apache manually, and watch your logs
Ie:
in one terminal window, type:
tail -f /var/log/httpd/error_log
make a new Terminal window and type:
sudo apachectl start

Grid Control performance tab not available when on the target home of ASM

I noticed recently that the "Performance" tab/link is not available when you are using 10g Grid Control and you are on the home page of an ASM instance. Can this be explained?

Hi MarGur
I try to help you. The OEM Grid Control in some times not discover the Oracle 9i databases and you must to add manually.
First, check in your target machine that the user owner of agent software have rights of read and write in the ORACLE_HOME directories of Oracle 9i databases.
Go to Grid Control Console
Select Targets ---> Databases
Press Add --> Select the host ebisdb2.oneshield.com and press continue
The automatic discover process begin. When finished is very normal that nor discover the Oracle 9i databases. You press the Add manually button
in the page that appear you must entry all the configuration information of database:
ORACLE_HOME directory
DBSNMP USER
DBSNMP PASSWORD
HOSTNAME
PORT
SID
Check that the dbsnmp user in your database is unlock and press the TEST button to verify the connection work fine.
After this many windows appear of configuration process, and you will put the sys password and host credentials.
If you have problems, tell me
Regards

BI Publisher ADMIN tab missing

I'm logging in as Administrator to BI Publisher, but the Admin tab is missing at the top of the screen.
When I log into Analytics as Administrator, and select Settings...Manage BI Publisher, I get this error screen:
"Reporting Login: Login failed: Please contact administrator for your username/password."
And although there is a link on that page that says "Details", clicking it simply returns "Error Codes: " with no further explanation or list of error codes.
If I select "Settings...Manage BI Publisher" again, the BI Publisher Enterprise screen opens without the error message, but also without the Admin tab.
Administrator is listed as a valid user under Settings...Manage Privileges...Manage BI Publisher.
Any clues or thoughts?

Are you using BI EE security for BIP? If so, it sounds like you forgot to create the required BIP roles in your RPD before switching BIP over to use BI EE security. Go into your RPD and create a role called XMLP_ADMIN. Put administrator in that group. This should fix the immediate problem. There are 5 other groups required for this to work properly. You also need to setup a subject are called SA System.

Planning Availability Times tab not available

Dear All,
Greetings!
We have a SAP NW 04s system with PI 7.0 SP 11, we are trying to do some actions in the Planning Availability Times tab at the Communication Channel Monitoring in Runtime Workbench.
But the Planning Availability Times tab is not available when I choose any of the Communication Channels, I am able to view only the Cluster Node and Administration Tabs in the browser screen.
Kindly let me know whether any configurations needs to be activated for the tab
(or)
Any special authorizations to the user
(or)
Is the feature available only from SP12, as I searched few OSS notes for Planning Availability Times and found that the corrections or changes refering to SP 12 and above for WAS 7.00.
Currently we are on the below mentioned SP's,
SAP_ABA                     700                     0011
SAP_BASIS     700                     0011
PI_BASIS                     2005_1_700     0011
SAP_BW                     700                     0010
Kindly help me in solving the issue.
Thank you
Regards,
Vineeth
SAP BASIS

Hello Vineet
I am not sure exactly when this functionality was released (SP11 or SP12). I think it may be available in the latest SP11 patches (XIAFC, XIAF and XITOOLS). You would need to be on the latest patches to ensure you can use the functionality. If you still don't see the button then it will be necessary to go to SP12.
Regarding configuration etc, see the link below.
Planning Availability Times
http://help.sap.com/saphelp_nw70/helpdata/EN/45/e3c488f87c6f74e10000000a1553f6/frameset.htm
Regards
Mark

BI Publisher -Schedules Tab not active

Hi Experts,
I have configured the scheduler as given in "http://oraclebizint.wordpress.com/2007/09/13/oracle-bi-ee-10133-configuring-delivers-ibots/".
I am able to start the services [Server , Presentation and also the Scheduler]...
But when i login to publisher i still see that the Schedules Tab is greyed out [ is inactive].
Is there any other settings that i should do to enable this.
Appreciate your immediate reponse
Regards,
Veena

Hi Borkur,
I have done the configuration at ADMIN also..
Still teh Schedules tab is greyed out.
Any RPD level settings to be done..
Please let me know the steps i should follow while configuring scheduler in Admin Tab.
May be i have missed out some step.
Regards,
Veena A

Attribute Editor: Alarm Tab Not Available

Hi,
We have installed Sun Manager Center 4.0 with Addon v 5.
When we select, <server object> -> Operating System -> Kernel Reader -> System Load Statistics -> Load Average Over Last 5 Minutes, in the console, the "attribute button" becomes unavailable.
Does any body know why this would be?
In other installations the " attribute button" is active. When selected the alarm tab becomes available.
Why is our installation different?
Thanks,
Gilbert

This has been sorted.
Thanks

HP webservices tab not available when using HP Jetdirect 2700w wireless print server

I recently bought HP Laserjet Enterprise 500 m551 dn color laser printer with HP jetdirect 2700w wireless print server ( one day old at this time).
I was able to configure the device and enable/ use eprint services using the embedded server with a wired connection.
However when I attach a the mentioned wireless print server, the "Webservices" tab disappears from the configuration website, the printer reports that the eprint services are not enabled and ofcourse hp eprint or google cloud print do not work. The printer appears offline at eprintcenter. Everything else works fine.
On the product website for the wireless server, it clearly states that this is compatible with eprint services.
What am I doing wrong.
Arjun
HP Laserjet Enterprise 500 m551 dn color laser
HP Jetdirect 2700 w wireless print server
Win 7 Ultimate x 64
Netgear WNDR 4500

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Jetdirect board here:
http://h30499.www3.hp.com/t5/Print-Servers-Network-Storage/bd-p/bsc-254
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Published web galleries not available as web widgets in iWeb

hi all. sorry some are experiencing probs with iWeb '08. It does seem to have some bugs, but man it is cool for my uses! I have published a web gallery in iPhoto, but when I go to insert it in my iWeb through the Insert Menu up top or through the web widget menu it says there are no web galleries available. i've restarted my machine and still no go. I can visit my web gallery no problem on the internet. Any thoughts? just a bug that needs to be squashed?
seeegs

Same problem here. Does anyone know what this command does? Does it create an iframe tag with the web gallery embedded as a frame? Perhaps we could simulate the effect with HTMP snippets while apple fixes it.

Calendar published with iCal not available in .Mac?

Hi!
I have published a calendar with iCal successfully and without any issues - this is a home calendar and so has a limited amount of dates, events etc. However I recently imported my work calendar (which has large amounts of data) and I also published it to my .Mac account.
Other users can subscribe successfully to my published work calendar - however noone (including myself!) can view it online. Clicking on the link throws up teh following error:
. MAC - We're having trouble fulfilling your last request. Please return to the .Mac home page
Is there any solution for this? perhaps .Mac/iCal doesn't like 'private events' (from Outlook) for example?
Many thanks in advance for your time and help,
KJQ.

I have sometimes had issues like that when I used to
publish calendars on .Mac. When I would publish the
calendar on .Mac, iCal would give me a link like
this:
http://ical.mac.com/sack_sama/mycalendar
When you go to that page, the link in the your
browser's location bar becomes this:
http://ical.mac.com/WebObjects/iCal.woa/wa/default?u=s
ack_sama&n=mycalendar.ics
Hi Dr. Zoidberg,
Yes the link is of the format of the first link that you provided (above). I have tried renaming the calendar and republishing same but this does not help either.
Thanks for your help,
KJQ.

Cloned OMS - WebLogic Admin Server not available....

Greetings,
We are working our way through an active active R4 OMS setup, and we just successfully cloned oms1 to oms2 via cloud control, and executed the post install steps. We now need to access each of the OMSs WebLogic Admin Server Console to confirm LDAP settings, and the oms2 WebLogic Admin Server Console is unavailable. The oms2 clone has the same WebLogic Admin Server details as oms1 (see below).
Is that by design, i.e. only one WebLogic Admin Server Console with two load balanced OMSs?
Which files do we need to edit on oms2 to get oms2's WebLogic Admin Server on-line?
oms1:
/u01/app/oracle/product/middleware_r4/oms/bin/emctl status oms -details
WLS Domain Information
Domain Name            : GCDomain
Admin Server Host      : oms1.mastec.com
Admin Server HTTPS Port: 7102
Admin Server is RUNNING
oms2:
WLS Domain Information
Domain Name            : GCDomain
Admin Server Host      : oms1.mastec.com
Admin Server HTTPS Port: 7102
Thank you,

The WLS admin server only exists on the first OMS host. Usually an SLB is used for load balancing.
For information on HA (High Availability) solutions, see:
http://docs.oracle.com/cd/E24628_01/install.121/e24089/ha_intro.htm#EMADV9611
Regards,
- Loc

Account assignment tab not available in ME51N

hello,
can any one replay in purchase requisition account assignment tab is not there
pls let me know how i have to configure it.
rk

Hi,
It could be an authorization issue then. Can you please check in the IMG the following menu path:
IMG
Materials Management -> Purchasing -> Purchase Requisition ->
Set Up Authorization Check for G/L Accounts.
Materials Management -> Purchasing -> Purchase Order ->
Set Up Authorization Check for G/L Accounts.
Documentation IMG:
"Set Up Authorization Check for G/L Accounts
In this step, you set up the authorization check for G/L accounts in the
case of purchase requisitions.
You can determine whether or not the authorization check is to be active
for each company code.
If the check is active, each time a G/L account is entered in a purchase
requisition, the system checks whether the user has the posting"
Please check whether the authorisation group in the account code
(transaction FS02, the field is on the 'Control data' tab, technical
name is BEGRU) is setup.
When a account assigned purchase requisition is created, the system
checks for object F_BKPF_BES with values from the BEGRU and activity 01.
This controls users to enter an account assignment when they
create a purchase requisition.
I hope it helps.
Regards,
Edit

Admin user not available in workgroup

When I set up my server, I first set up the main admin user, called 'admin'. This is the user used to login in to the server.
In Workgroup Manager, I created various users for web, mail, files haring etc. However the 'admin' user is not listed as one of the users in Workgroup Manager but is the only user is System preferences/Accounts.
Does it matter if I set a user in Workgroup Manager, called admin, or will break the system?
Thanks.

I would not prefer to have duplicate users with the same name around in multiple directories. (I tend to use host-local admin names for the local admin users.)
In WGM launched on the server, and located immediately below the Server Admin icon in the upper left of the WGM display, you'll see a small blue globe and a disclosure triangle and the text "Authenticated as ... to..." and you'll want to select that and explore the local directory.
In other words, when you're running Open Directory as a network accounts (domain) server, there are two user account directories. The local one that all Mac boxes have, and the networked one.

Publisher Admin tab not available

Similar Messages

Maybe you are looking for