SWAT admin tool for Samba usage not possible

Hello,
In a Console i have done su root after entering the password i did /sbin/swat start to start the Samba Web Administration Tool, when i try to access it in Safari or Firefox i get asked for username and password, here i use username root and roots password (which is definitely correct). But i always get "Login incorrect"
Do i have to use a different user/password than from the root account?
Thanks,
tyrtux
MacBook White 512MB 60GB HDD 2Ghz ICD Mac OS X (10.4.8)

Well, i have edited smb.conf by hand as i need to share some extra directories where no password is needed, ie the user nobody should be used, this worked very well in 10.3.9 but notw it seems samba doesn´t check/use the smb.conf file anymore. And since i am used to SWAT it would be easier and faster for me to modify Samba Settings in OS X.
Thanks
tyrtux

Similar Messages

Document is in transfer for PO, creation not possible

Hi
We are using SRM 4.0 EC scenario. Recently we have been facing the subjected error 'Document is in transfer for PO, creation not possible' while making the confirmation in SRM. It is observed that this is happening mostly in case once we make GR and cancel and repost. Thru some other thread posted in forum, came to know taht we need to delete the entries in table "BBP_DOCUMENT_TAB" via FM ''BBP_DELETE_FROM_DOCUMENT_TAB''. I ran thei FM but found NO poitive results. Hope somebody can help me out. This error became very common in our production system
Thanks
Kiran

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

GR Error: Document is in transfer for PO, Creation not possible

Hi Experts,
While posting a GR for PO, following error is being encountered,
'Document is in transfer for PO, Creation not possible'.
I checked the PR - PO. There are multiple GRs for the PO and all earlier GRs are posted successfully.
For posting a new GR this error is coming.
Any pointers?
Thanks in advance.
-Dhananjay

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

Account determination for LGCA -INS not possible..?

Hi experts
Here i m getting the error "Account determination for LGCA -INS not possible" while doing GOODS receipt for capital items.
we have done GR earlier for the same capital item, but now recently i m getting this account determibation error .
Can any body giv some idea to trouble shoot the problem.
Thanks
Sap-MM

Hi
ur getting this type of error .. take example as below :
"Account determination for entry IN01 GBB 1000 BSA 7910 not possible"
1 go to transaction OBYC
2 Click on GBB
3 it will ask you for Chart of Accounts.. give input IN01....enter
4It wil show you a list of Valuation /General Modification/Valuation Class/Debit GL account/credit GL account
Maintain Along with the help of MM guy/FI guy/ Nor wrong GL posting will take Place
rgds
BV
Edited by: Brijesh Verma on Dec 14, 2009 4:53 PM

Account determination for entry PRD not possible

Hi All,
In exsiting PO line, we did two goods receipt, and we tried to invoice the vendor based on the goods receipt. The wearid thing is only one goods receipt got invoiced, the other gives error message saying: " account determination for entry PRD not possible ".
I checked with finance team, they said we intentionally didn't set up the account for price difference. And if one GR can be invoiced and goes to correct accout, the other one should be able to invoice as well, when I simulate the entry, the vendor account didn't get picked up, I think that's the key of this problem.
why the vendor account didn't get picked up by the system? please advise if you have any thoughts, I appreciated.

Nancy,
This is the restriction with materials managed in moving average price. I'm guessing that the user has performed goods issue between GR and IR on the second material. If you'd like to keep the current config setting, you will need to reverse the GI transaction, post the invoice, and repost the GI.
The above steps should resolve your current issue. However, this may not be the best approach as you will need to keep asking user to reverse their GIs every time the stock quantity is less than invoiced quantity. I would recommend that you talked to FI folks and convince them this is part of standard SAP process. It makes sense because we want to distribute the difference between invoice price and PO price to the existing stock quantity. Without this restriction, the moving average price can be skewed disproportionately.

Pls help me to find admin tool for latest bi linux version

Hello,
Oracle Business Intelligence, v. 11.1.1.5.0
I installed the latest version of OBIEE of linux version 64 bit on the server.
Installation went fine.
Now the only problem is finding Admin tool.
Could u pls tell me where its sitting.
I know i Windows it Admintool.exe
Thanks

Hi user,
Firstly you wont have admin tool for linux environment....you need to install the client on windows local machine and access the BI server of linux by setting up a connection.
So you need to download 64-bit or 32-bit windows one to install http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/biee-111150-393613.html
Read this document :- http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10539/c5_postinstall.htm#CEGEHEJF
hope answered your question.
Cheers,
KK

Where i can dwonload OBI Admin tool for OBIEE 10g?

Please, where i can dwonload OBI Admin tool for OBIEE 10g???
Edited by: 914017 on 12-feb-2012 21:12

you can download it from edelivery.oracle.com.. first you need to register once.. then you are all set.
Thanks,
RM

Tools for Monitoring Usage?

On this page I find the following, along with other info:
Usage Alerts – A free tool that helps you monitor your usage via text messages sent directly to your mobile device
Usage Alerts
My Verizon
Usage Meters
Cost
Free
Access Method
• Text Messaging
• Email
Automatic Notifications
Yes, for data usage.
See below for voice
and messaging usage*
Usage Alerts
This tool helps you monitor your usage via free text messages sent directly to your mobile device and / or emails sent to your email account. We offer two different types of free usage alerts: data usage alerts and voice and messaging alerts.
Voice and Messaging Alerts: If you have usage based pricing for voice or messaging, we may send you a free text message alert if you exceed, or are trending to exceed, your allowances on or around the twentieth day of your bill cycle.
How to Get It
Usage alerts are included with all usage based plans; no initial setup is required.
I just had a bill with $112 overage for voice, I believe the overage began 13 days before the end of my billing cycle. If I'm reading the above correctly I should have been notified but wasn't. Associate I spoke with couldn't explain but did offer 30% discount. @.45/min. the charge is much too high anyway. Can anyone explain why I wasn't notified so I could avoid this overage?

I understand your frustration of receiving a bill that isn't what you expected but sometimes this happened because a number of possible things that may have been over looked or even simply a possible error but I have to point out that the usage automated system updates daily but isn't guaranteed to be 100% reliable because of a number of different variables that could cause the information to be off. My suggestion is to use the #BAL from the device or #MIN to check usage, these are usually closer to the correct usage balance.
Another got suggestion to avoid this from happening is to log into your MyVerizon app on your device or online and keep track of your activity there..

Does Apple plan to stop development of OSX server as there is no server admin tools for OSX 10.8 so far?

I have been waiting for the OSX 10.8 server admin tools to config my ML server for few months. I think Apple is not interest to develop server products. Please tell me is this the fact so that I can change to other server solution. At the mean time, who can tell me where to find a commnd line manual or document so that I can config the server for using different port for pop and smtp and other configuration.

What tools are you looking for? Server.app is the only configuration utility for Mountain Lion. All of the functionality that was formerly in Server Admin.app has been moved into Server.app.

Server Admin Tools 10.5.5 not within Software Update routine

Server Admin Tools 10.5.5
<http://support.apple.com/kb/HT2667>
available as a download but not appearing within Software Update.
I find that a little odd, as it includes updates for users of Server Admin Tools 10.5.3.
Maybe the update package(s) will appear separately in due course…

Pity Apple couldn't be bothered to change the version number of the SA tool. After installation, mine still says 10.5.3. Apple's quality control over the server product line continues to deteriorate. One wonders when they'll actually either hire some additional staff to bring the product up to snuff, or abandon its advancement like the XRAID. How many folks are left on the server development team or have they all been poached for the iPhone/iPod shiny stuff?
Man, there was so much promise in the OSXS package. But it's not even half-cooked compared to the butt-ugly-but-functional alternatives. My clients aren't at all impressed with the stability nor the lack of fine-grain feature management -- and it will be a tough sell to keep them with the Fruit if Apple doesn't fix and enhance THIS cat. Waiting for 'Snow Leopard' to fix everything seems like a stalling tactic. Waiting for Godot.

Xserve RAID Admin Tool 1.5.1 not quite working

I have an Xserve RAID that's currently at firmware 1.3.2/1.26a according to Xserve RAID Admin Tool 1.5.1. However, when I try to upgrade the firmware to 1.5.1 via the RAID Admin Tool 1.5.1, it just doesn't do anything--it accepts the .xfb file and then...nothing. Quitting out of the the Admin Tool and restarting still shows the firmware at 1.3.2/1.26a. Same thing if I shut down and restart the Xserve RAID from the RAID Admin tool. Any tips? There's nothing stored on the RAID system yet (the array hasn't even been created--it's a blank system) and nothing is attached to it either (I've just plugged in the ethernet links to format it first before I start attaching an Xserve G5 to it). Also, even though the lower controller is showing green and I have an ethernet cable plugged into it, I can't get any info out of it nor can I configure it with an IP address. Only the top controller seems to allow some configuration such as IP address.

Okay, I've solved the problem.
Basically, the issue was that the lower controller wasn't seated right despite it showing a green light in RAID Admin. When I went to visually inspect it, I noticed that despite what RAID Admin 1.5.1 claimed, its light wasn't even on, let alone green. And since the lower controller handles slots 8-14 of an Xserve RAID and my slots 8-14 are totally unpopulated (empty) at the moment, it was never noticed. Now that I've reseated the lower controller, everything is visually showing green across the board and the firmware upgrade is proceeding as expected and it has upgraded the firmware from 1.3.2/1.26a to 1.5.1/1.5.1c complete with autorestart of both upper and lower controller modules.
Basic lesson learned: RAID Admin lies. If possible, visually inspect the box itself!
Thanks to all who responded.

DAC as schedular tool for Informatica workflows(Not for OBIApps repository)

I have to use DAC as administrative / scheduler tool for Informatica workflows. Earlier, I configured the same for OBI Apps. It's running fine. Now I am not refering to Oracle_BI_DW_Base.rep which is the inbuilt repository provided with OBI Apps. I have to run my workflows through DAC. I have gone through the below listed steps to achieve the same,
1) Created New USER
2) Used that user to configure DAC connection as well as for DAC repository tables. (am not sure whether it is a best practice or not)
3) Created a new Source System Container. (no containers were there initially)
4) I have folder in Informatica as "MyRep", so I created task logical and physical folders with the same name in DAC (Tools => Seed Data =>........)
5) Created new Subject Area, tables, tasks, performed Synchronize Tasks.
5) Set up informatica servers, Physical Data Sources. Tested them, no flaws.
6) Added new Execution Plan.
7) Assigned Subject Area to it.
8) Clicked on "generate" button in parameters section of execution plan. No Parameters generated. Now got into confusion.
*9) I couldn't find my tasks listed in ORDERED TASKS tab.*
10) Clicked on BUILD. Then got error message as below,
MESSAGE:::No tasks were found to build this execution plan.
Please do let me know what is the wrong step here.
Thanks,

Thanks Ahsan, it solved my problem.
I forgot to set Configuration Tags properly, later Assembled the subject area. Cheeeeeeerrrrrrsss... It's working
Edited by: ABT on Dec 19, 2011 9:49 PM

Version Admin Tool for Oracle BI 11.1.1

I have question about Oracle Admin Tool. I patch system version to Oracle BI 11.1.1.6.10 .
Which version Oracle Admin Tool will be proper for this version OBIEE server.
KG

Hi,
we've tried to synchronize application rooles from Administration Tool, but without any positive results. List of application rooles in EM/bifoundation_domain is different from a list in Administration Tool/Identity Manager/Application Roles. There aren't any errors in bifoundation_domain logs, but in weblogic domain logs we have many erros with the same description:
"Failed to get WLS users.". What could be the reason?
Pzdr.
GO
PS User filter settings affects only 'Users' card: if I set user fileter to "*", I see all users from LDAP provider, but this setting doesn't affect to Application Roles card...
Edited by: 1005521 on 2013-05-13 02:05

Admin Tools for ThinkVantage Technologies

Several of the ThinkVantage Technologies applications have supporting deployment guides which describe how to manage the applications. Some of the applications have companion tools which are intended for the use of administrators. For instance, Update Retriever, ThinInstaller, and Package Builder are all part of the System Update suite of tools for managing Lenovo software updates and can be found on the admin tools page.
You can find these guides and tools here:
http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVAN-ADMIN

It's Lenovo's system management tool for the TVT's
http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/special-offers.workflowhowPro...

Update for CC 2014 not possible, i need a quick solution. I also cant import anything

Creative Cloud update is not possible, i also can import only once in AE CC 2014.
I`m on Mac Yosemite 10.10.2 the Cloud Manager also shows he cant finish the Update.

Quit Creative Cloud desktop application .
Step 1:
1) Right click on Finder icon and select "Go-To" Folder option.
2) You will get a text box, type-in below command and then hit 'Return' key.( Do not miss ~ symbol)
~/library
3)Then navigate to Application Support>Adobe.
Open Adobe folder and rename AAMUpdater and AAMUpdater-old.
Step 2:
1) Right click on Finder icon and select "Go-To" Folder option.
2) You will get a text box, type-in below command and then hit 'Return' key.
/library
3)Then navigate to Application Support>Adobe.
Open Adobe folder and rename AAMUpdater and AAMUpdater-old.
Then launch Creative Cloud application and check.
Let me know whether it gives blue update button for After Effects CC 2014 ?

SWAT admin tool for Samba usage not possible

Similar Messages

Maybe you are looking for