Swf error "verify if any of the actionscript keywords..."
I have looked through the other posts on this topic, but my experience seems different. This error occurs when I add a question slide. If there is no question slide, then I can create the .swf file without incident. When I add a question I am selecting a T/F question. And I did not change anything on the question slide -- still get the error.
I combed through every slide looking for characters that shouldn't be there, but can't find anything. This is a detailed, very complex project and if I have to start from scratch I really think I will cry.
Any help would be most appreciated!
thanks.
Please Try this:
Go to C:/program files/Adobe/Captivate/AdobeCaptivate.ini
Open the file with notepad.
you need to write this "Use32BitJVMForPublish = 1" (Without double codes) in AdobeCaptivate.ini file.
Note : Make sure Adobe Captivate is not running while editing .ini file.
Save it and Try to publish the project.
Thanks.
Similar Messages
-
Unable to publish in Swf format. Get error message reads: 'Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name'. Anyone know how to fix?
Hi There,
Can you tell me the Operating System and Captivate version you are using?
Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
Regards,
Mayank -
When publishing a captivate I get the message "Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name." and it won't allow me to publish the Captivate, can anyone help?
Hi There,
Can you tell me the Operating System and Captivate version you are using?
Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
Regards,
Mayank -
App-v 5.0 Error 0x80000003 (launching any executable in bubble)
Hi.
I've sequenced OpenEdge Client 10.2 on a Windows 7 (x86) client. I keep getting this error when launching any of the application shortcuts on a test VM. The error is seen regardless of shortcut/exe.
Our App-V infrastructure is outdated (5.0.285.0 RTM), so I tried in a test lab re-sequencing on the SP2 sequencer/client. The error persists. There is little in the event logs (i.e., nothing) of value and Procmon doesn't display anything that stands out.
Anyone seen this before?
Event log excerpt:
Faulting application name: showcfg.exe, version: 0.0.0.0, time stamp: 0x4b26ce51
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b83b16
Exception code: 0x80000003
Fault offset: 0x0003491e
Faulting process id: 0xe28
Faulting application start time: 0x01cf9b53a642aa1b
Faulting application path: C:\ProgramData\App-V\A127AFFE-D58C-40DC-9536-88852B2FC314\66BE6629-9907-4462-9176-F49436AA5051\Root\bin\showcfg.exe
Faulting module path: C:\WINDOWS\system32\KERNELBASE.dll
Report Id: e404a15e-0746-11e4-8524-005056262ab2Thanks for your help.
Tried 'not launching'; error persists.
App installs and runs natively without error. I even tried installing the application on the same VM as the installed sequence in case a component was missing from the sequence, without success.
VC 2005 runtime is required for the app and is installed either in the bubble or on the client, doesn't make any difference.
With analytic and debug logs enabled, I see an error but this may be expected?:
Log Name: Microsoft-AppV-Subsystems-VObjects/Debug
Source: Microsoft-AppV-Subsystems-VObjects
Date: 10/07/2014 16:26:56
Event ID: 110
Task Category: None
Level: Information
Keywords:
Description:
No objects node in manifest. Error code: 0x80-0x0
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-AppV-Subsystems-VObjects" Guid="{c505d6a3-83eb-41bc-89a1-96067e0cf001}" />
<EventID>110</EventID>
<Version>1</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-07-10T15:26:56.489176500Z" />
<EventRecordID>0</EventRecordID>
<Correlation />
<Execution ProcessID="1820" ThreadID="672" ProcessorID="0" KernelTime="27" UserTime="41" />
<Channel>Microsoft-AppV-Subsystems-VObjects/Debug</Channel>
<Computer>removed</Computer>
<Security UserID="S-1-5-21-1451040463-1185243809-324685044-12345" />
</System>
<EventData>
<Data Name="ErrorHigh">128</Data>
<Data Name="ErrorLow">0</Data>
</EventData>
</Event> -
The Mail application has suddenly started giving error:
"Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"
It was working fine till yesterday, suddenly it stopped. I have 3 email accounts configured here, 2 are on exchange servers and one yahoo. Connection verification works and shows all servers as green.
Any inputs?I had 3 accounts, 2 ms exchange accounts and 1 yahoo. After removal of yahoo, everything is back to normal.
Regards
Rohit -
I'm having some difficulty updating a table in my powerpivot data model. The data for the table is stored in a local excel file; if I go to
Existing Connections select the connection and do a test then everything is successful. When however I try to refresh that particular table I get the following error:
"We couldn’t refresh the connection. Please go to existing connections and verify they connect to the file or server."
In the past I had this and it was an authentication issue, the files are stored on SharePoint and I wasn't logged in to Sharepoint - I have however checked this and it can't be the issue because I have other tables linked to other excel files in the same
location that are refreshing without issue. Can anyone think of what may be causing it?
I have even tried creating a new local excel with the same data, added it to the data model and then tried a refresh and I I get exactly the same issue.
Are there any known issues with refreshing data from an Excel file if, after the initial import, you add columns to the table in the excel file I was wondering if this might contribute?
ThanksHi Maracles,
Thanks for your post.
From your description, I tried to reproduce this issue on my test environment. However, everything is fine for me. Could you please post the specific version of SQL Server PowerPivot for Excel?
You can try to use a trace file to troubleshoot errors in PowerPivot. If this issue still persists, please try to reinstall SQL Server PowerPivot for Excel to see if this helps.
For more information, please see:
PowerPivot Options & Diagnostics Dialog Box:
http://technet.microsoft.com/en-us/library/gg399091.aspx
Using a Trace File to Troubleshoot Errors in PowerPivot:
http://www.sqlchick.com/entries/tag/powerpivot
Best Regards,
Elvis Long
TechNet Community Support -
Runcluvfy.sh stage -pre crsinst: error Unable to reach any of the nodes
Hii all,
Well, I've gone through the pre-reqs for trying to install 11G clusterware on RHEL 5.3.
I'm to the point where i'm trying to run:
./runcluvfy.sh stage -pre crsinst -n node1 -verbose
I get this:
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check failed from node "node1 ".
Check failed on nodes:
node1
ERROR:
Unable to reach any of the nodes.
Verification cannot proceed.
Pre-check for cluster services setup was unsuccessful on all the nodes.
I'm just wanting right now, to install a one node RAC system (I will add servers later as I get them online).
I've verified that ssh is working (thinking it may be trying to connect to itself by ssh). I have the keys generated and installed...if I connect ssh as the oracle user back to the same machine, it gets me right on with no prompts for passwords.
nslookup on node1 looks great.
This box has 2 cards....eth0 and eth1. Right now in the /etc/hosts file, I have node1 to the IP for eth0, and node1-priv set for the IP address eth1.
I do have a little trouble understanding what the node1-vip is supposed to do or be set. I found the an IP address one higher than for eth0 wasn't being used, and set node1-vip to be that.
(Can someone explain to me a little more about the vip host?? Is it supposed to somehow point to node1's IP address on eth0 like the regular one does?)
Since this is a one box, one node install...hoping clusterware and checks are just looking at the /etc/hosts file. I've tried playing around, and setting node1-vip to be the same as node1 (IP)...that doesn't work either.
One thing I can guess 'might' be wrong. Does runcluvfy use "ping"? I found the oracle user cannot ping this box from this box. The box (node1) can be pinged from outside the box...it is registered on DNS, I can ssh into it no problem, and again, oracle can ssh into himself on same box with keys properly generated).
I've been looking around, and I just don't see much of what to look at to troubleshoot with this error, I guess everyone gets past the verification the first time with no host unreachable errors?
I'm a bit weak when it comes to networking. Any help greatly appreciated...suggestions, links...etc!!
cayenneOk...looks like this was the problem. It appears the SA's, per newer policy, had turned off "ping" for any other user on the box besides root.
I took a shot in the dark, and had them turn it on (as that ssh'ing and other items to check seemed to work outside the runcluvfy script). They turned on ping. The nodes from the script are now reachable and test positive for equivalency.
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node Reachable?
node1 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node1 passed
Result: User equivalence check passed for user "oracle".
Pre-check for cluster services setup was unsuccessful on all the nodes.
I"m guessing that last line...was due to not having the clusterware running on any other boxes?
Anyway, will try to config. RAC, and get things installed. -
SWF error- while generating the flash files.
Post Author: [email protected]
CA Forum: Xcelsius and Live Office
Hi, in the old forum I came across the folowing topic: SWF error- while generating the flash files.
As I have the same problem, I would like to know the solution / answer / meaning please. What do I have to change in order to let in function properly again.
Thanks anyone.
Femke
(The post is from 3/6/2007)
The following error is generated upon generating the flash files Any insight???SWF error- while generating the flash files.--ErrorSWF Function Overflow. The generated SWF will not function correctly because data dependencies go beyond SWF limits.--
OK -Post Author: Andres
CA Forum: Xcelsius and Live Office
Hello.
I'm having the same problem. It appeared after I made use of many cells (a table of 10x200 cells) with formulas inside them.
Before that, while I was making my tests and only used a few cells and the .XLF file was 4Mb, I had no problem. Now that the .XLF file is 8Mb I see this error appearing (in Spanish):
"Error
Desbordamiento de la función SWF. El archivo SWF generado no funcionará correctamente ya que las dependencias de datos superan los límites de SWF."
Any idea of how this could be resolved (appart from using less data)?
Thanks in advance. -
I am trying to set up iCloud to sync my Outlook Calendar however it keeps failing due to 'an unexpected error' but it doesn't say what the error is! Any suggestions would be gratefully received.
Create a iTune and App Store account without credit card
1. Go to App Store and select a free app
2. Tap INSTALL APP
3. Create New Apple ID
4. Confirm Your Country
5. Agree with Terms and Conditions
6. Fill in your Apple ID and Password (must be a valid email address)
7. Create and answer your secret question e.g. What is the name of my dog?
8. Select NONE for Payment Method
9. Fill in Billing Address i.e. your address
10. Submit application for new Apple ID
11. Wait for verification email
12. When email arrive, verify your account
13. Start downloading your free apps -
JSFL or SWF Panels and the ActionScript Editor
Howdy, I'm hoping to be able to write JSFL commands or make swf panels for the Flash IDE that will work with the ActionScript Editor. Mind you, not the ActionScipt panel that is open with a .fla, but with the Flash text Editor that edits .as files directly. I've been able to get it going with the actions panel, but don't know if it's possible with the .as editor. Any ideas on how to accomplish this?
Essentially I'm hoping to create a panel that generates getters/setters automagically, like FlashBuilder does, but with some additional features, like ASDoc commenting etc. Also, I want to have it generate empty functions for any event listener callbacks as I code the listeners.
Thanks in advance!
-TedNever heard of that, and not sure if the hot fix addresses that, but make sure you have it - your Flash version should be 10.0.2 in Help > About
You can get the update from: http://www.adobe.com/support/flash/downloads.html -
Please help! I get the message ALERT: Error verifying class MyCnavas
Hello, I'm Trying to work on a gaming project in j2me. For which first of all, I'm trying to create a menu using the low level API. I tried the following program to see if my idea works. I tried to add in the menu items by calling g.drawString inside a for loop in the paint method. Then I've used the drawRect to draw a highlighting rectangle around the first menu item. It compiles and preverifies successfully, after which it gives me the error while running:
ALERT: Error verifying class MyCnavas
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
class MyCanvas extends Canvas
private static final int DOWN = -2;
private static final int UP = -1;
Graphics g;
int itemposition = 0;
public MyCanvas()
super();
repaint();
public void paint(Graphics g)
this.g = g;
int pos=0;
for ( int i =1; i<3;i++)
pos = i*20;
g.drawString("Option".concat(String.valueOf(i)), 20,pos, Graphics.TOP|Graphics.LEFT);
g.drawRect(15,pos-5, getWidth()- 50, pos+5);
public void keyPressed( int keycode)
System.out.println(keycode);
//if ( keycode == UP)
public class MyMIDlet extends MIDlet
MyCanvas can;
Display display;
public MyMIDlet()
can = new MyCanvas();
public void startApp()
display = Display.getDisplay(this);
display.setCurrent(can);
public void pauseApp()
public void destroyApp( boolean unconditional)
}Any help on this issue will be greatly helpful
Regards
RahulNo, I am using the default emulator provided by the sun midp 2.0 specification. I am executing the program on the command prompt. I am not using the wireless tollkit provided by sun.
I already tried removing those declarations of UP and DOWN, which are quite unnecessary I understand. and I tried removing the repaint call in the constructor. It still gives me the same problem.
I am not able to figure out what the problem could be. ANy help on this would be appreciated
Rahul -
When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?
Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
All apple devices are recognised by the PC in itunes but cannot get the music to load onto any of the devices from my itunes library. there is an error message with 100+ errors as songs are not found. I have tried alll sorts of things but at a loss for how to get music onto my devices. I want to buy some more songs but reluctant to because not sure if I can listen to them on my devices! The PC is too difficult to listen to songs on (for obvious reasons).
Please help.Thanks for trying, no it did not help. The article describes getting song from apple devices to PC, not the other way around. I will try ringing tech support tomorrow.
Thanks anyway. -
I want to use the same apple ID but I don't know the password for my email account to verify iCloud any answers?
iForgot.com
-
How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....
Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.
Maybe you are looking for
-
Having difficulty cluster convert to array of enumeratorsHi I have difficulty conver
Hi I have difficulty converting a cluster of enumerators to array of enumerators, unlike unbundle and build_array vis that work. So If I have a unknown number of enumerators, I cannot use unbundle and build_array vis as they are fixed for decided num
-
10.4.9 and hot macbook pro battery and fan noise
Since upgrading -- the bottom of the macbook pro 15 is suddenly really hot...I mean, really hot...and the fan keeps coming on -- which NEVER came one with the previous version of 10.4.... Any ideas??
-
Database starting on one node.
Hi All, After reboot of server and ssh key gen. My RAC instance is running only on one node. What can be problem? Thanks.
-
Retina display with ghost phenomenon
I'm an italian user of 15,4 retina display, with big and always bigger phenomenon of ghosting...the assistance said that there is no solution at the moment..but my mac cost 3000 euros and I don't accept this answer! I want a solution!!!
-
TS4002 i'm unable to shut off the auto response message
i had the auto reponse turned on before the icloud service was launched. now it's not listed under the mail rules , so there's no way to shut it off . Is there a fix for this ?