SWF is not working when it works on other major browsers.
I frequently see this problem but i cant found any solution including safe modes and profile changes..
Like any other, the swf is not showing but when i play it on "localhost" it works but when i uploaded it on the internet, it doesnt work or show anymore.. is there a way to make your swf firefox friendly? i heard that adobe flash made a filter or what that blocks swf like that..
heres the code of my the embed if theres a use..
<pre><nowiki><div class="bannercontainer">
<object width="940" height="445">
<PARAM NAME=wmode VALUE="transparent">
<param name="movie" value="images/banner.swf">
<embed src="images/banner1.swf" width="940" height="445" WMODE="transparent">
</embed></param> </param>
</object>
</div></nowiki></pre>
i also tried the mms.cfg thingy which u have to change a line.. and re place it on the original one on the adobe player folder
Note that you have different file names for the object (images/banner.swf) and the embed (images/banner1.swf)
You also placed the embed in the middle of a param tag and nested all param tags.
Because you didn't include a MIME type and the object doesn't have a classid for an ActiveX control for IE, I'm not sure what Firefox will be using.<br />
The object doesn't have a data attribute to specify the file.<br />
A separate embed is only needed when you specify a classid in the object.
<pre><nowiki><div class="bannercontainer">
<object width="940" height="445" type="application/x-shockwave-flash" data="images/banner.swf" >
<param name="wmode" value="transparent" />
<param name="movie" value="images/banner.swf" />
</object>
</div></nowiki></pre>
Similar Messages
-
ipad i have load swf file but swf is not working proper(flex 4.6) but android is fine to work how
On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed. -
Derivation Rules Not Working for other company codes
Hi,
I have 5 Company codes and only for one FM was activated. now i want to activate FM for all 5 company codes. for which i have assigned the FM area to all 5 company codes. I have also assigned the derivation strategy to all 5 company codes as well. now when i post a transaction for any other company code derivation rules is not being process hence no commitment item or fund center is derived. however for the original company code for which FM was activated in the first derivation rule are working fine means system is deriving commitment item and fund center. can any one tell me why derivation rules are not working for other company codes? do i have to add Company code in source field of derivation strategy? could this be the reason? because in beginning there was no other company code so we did not included any company code field in the first place.
Regards,Faizan,
Go to Funds Management Government> Actual and Commitment Update/Integration> Activate/Deactivate Funds Management.
In the screen create an entry for each Company Code and Funds Management Area combination.
Activate the AA Derivtn flag if you want the derivation to be called and the Update flag if you want to update commitments and actuals in FM.
Thanks
Shyam -
Qwertzuio not working - all other keys fine
Hi,
the aforementioned keys on my Air's internal keyboard have stopped to work. This has happened before, and it went away again. PRAM-Reset and Restart had not solved it at the time, I don't know what did.
Now they are dead again. Does anyone know how to reactivate them?
Regards,
Torsten(Yes, it is a German layout, when switching to English, it is qwertyuio not working)
-
Elite Pro, CMSS-3D not working and other issues after driver update
DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0 -
My trackpad in Macbook is not working properly. The tap and double tap is not working but other gestures are working. Please help me..thanks
Portables and Magic Trackpad: Jumpy or erratic trackpad operation
Might be something from that link that will help. -
Hello, my iphone 5s fell, thereafter i tried taking a picture, the camera app just shows a black screen and hangs, the front camera works on other apps (such as facetime and skype) but the rear camera is not working, all other apps work perfectly well, how do i resolve this
Double tap Home button and delete Camera app from multitask-list.
Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
If problem persist, make an appointment with genius bar for evaluation. -
How does one do a two way contacts sync between an iphone and outlook? Most of the community has answered as this to be "always so", but it does not work! Changes made on outlook get done in my iPhone, but it does not work the other way around!
Close the tab the web page is loaded in (command - W).
-
SWF animations not working properly when exported as PDF from InDesign
I'm using InDesign CS5 and have created a document that I want to add interactivity and animations to. I've created buttons and page destionations, etc, which all work perfectly when exported to a PDF but the simple animation that I wanted to include don't work. The animations have been created in InDesign then selection exported as a SWF file and then imported and placed in InDesign and then exported as an interactive PDF where the animations either don't work, haven't been picked up or don not work as they should. What am I doing wrong, how do I get the animations to work correctly?
Try this tutorial:
http://tv.adobe.com/watch/csinsider-design/indesign-creating-interactive-pdfs-with-page-tu rn-and-flash-animations/ -
Swf is not working properly when upload to server
I develop 1.swf which is having 3 buttons each one having
anather .swf to call 2.swf, 3.swf respectively.
This application is running perfectly on my PC, but
While uploading the swf to server the 2.swf and 3.swf is
not running. Can any one tell how to recover from this kind
of problem.justbipin wrote:
> basically my code working perfectly,
> but its not working properly when upload to server
> can anybody having any ref. or link to solve this
issues.
why is that we insist on seeing the source file ?
There is no one way of doing things in flash and no one can
help
you based on "does not work description".
This is way to broad of a subject to even try to guess.
Same as asking "my car does not work, what's up with
that"....
Please upload the problematic file and provide url for us to
check.
Otherwise you need to try to troubleshoot it yourself as we
can't
guess from here what possibly is wrong with that file.
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free> -
My Fullbrowser Portefolio Website work in SWF but not work in HTML
Hi people
First of all I am not very good in English language.
I created my portfolio website in flash as3, with javascript (SWFAddress and SWFObject), with contact form with PHP, and XML Gallery.
When uploading all the files into the correct folders for the server, the first times I view the site in browser it works correctly, the browser reads the HTML without any problems.
However I tested it on firefox, safari, ie, google chrome, and it just did not work in google chrome, so I tried to solve the problem, beginning to see where the error was in the HTML file.
I copied the original file, because that original file I knew it was working properly in other browsers, and started to make changes. I managed to get google chrome to open the HTML correctly but then did not work in firefox and safari.
So I decided to eliminate this html file and continue with the original file. I'll test again and something happen! The file browser can't read XML, everything else works correctly, alltransitions are correct, the animations are correct.
I try with the SWF and it opens the XML Gallery, I try with the HTML and it does not open.
I don't know what to do, can you guys help me?
Thanks!If the swf file is in a different folder than the html file, then it is might be a problem with targeting the XML file in the swf. When you place an swf file in an html page, anything that swf tries to load has to be targeted as if the swf file is in the same folder as the html. It does not have to live in that same folder, but it has to act as if it does.
-
IE7 and Multiple Embedded SWF Videos Not Working
We have a page that contains 2 videos that are streamed from our media hosting company. The code is fairly straightforward,
<object type="application/x-shockwave-flash" data="http://xxx.xxx.xxx/your.swf" width="400" height="300">
<param name="movie" value=http://xxx.xxx.xxx/your.swf"" />
<param name="allowFullScreen" value="true" />
<param name="wmode" value="transparent" />
<param name="allowScriptAccess" value="always" />
<param name="flashvars" value="streamer=rtmp://zzz.zzz.zzz/zzz.flv&autoplay=false" />
</object>
Similar code is used for the second video. The embed code is actually generated from the hosting company and has worked every time. Firefox and Chrome display both videos with no problem. However, IE7 only displays the second video. The first video just has white space where the video should be.
I have used 'embed' tag and conditional object tags (for IE), rewritten the code from scratch, changed the z-index, used Flash to generate code, cleared the cache - all to no avail. Is IE7 incapable of having multiple SWF files on the same page?
**I did notice that changing the autoplay attribute to true will allow for the video to display, however, the playback controls are not available.
Any ideas on how to get this working in IE7?
Thanks in advanceAnother me too. In particular the symptoms are this:
+ any YouTube video embedded within a webpage loads the poster frame and the controls, but after clicking the play button only shows the progress indicator briefly before showing "An error occurred, please try again later." within the video frame.
+ the same YouTube videos play fine on the YouTube site.
+ other Internet video plays fine, embedded or not.
+ when the error occurs Safari reports "One error in opening the page. For more information, choose Window > Activity".
+ the Activity window shows "forbidden" for http://v13.lscache4.c.youtube.com/videoplayback?ip=0.0.0.0&sparams=id%2Cexpire%2 Cip%2Cipbits%2Citag%2Calgorithm%2Cburst%2Cfactor%2Coc%3AU0dWSVhMVV9FSkNNNl9QRllH &fexp=900028&algorithm=throttle-factor&itag=34&ipbits=0&burst=40&sver=3&expire=1 274817600&key=yt1&signature=C15947474FA80C9A1B9DA597103C5FF7D621A478.0C1490DE456 5D519F602B0043A4E1F9D800417A0&factor=1.25&id=c3e8886e8b459334
+ the same URL downloads fine when visiting YouTube directly, except the signature value is different.
I have tested the following:
+ the same computer worked fine a week or so ago
+ other computers on the same shared ADSL connection work fine
+ Firefox works fine (contrary to other's experiences)
+ deleting com.apple.Safari.plist doesn't help
+ disabling/enabling the "Enable Plug-ins" preference doesn't help
+ deleting Preferences/Macromedia folder doesn't help
+ reinstalling Flash doesn't help
+ empty cache doesn't help
Tis quite perplexing. -
Hello all. I have a 'UI' module that loads in other swf files
based upon which button the user clicks. It is able to locate and
load the swf files with no problems. The problem arises with combo
boxes. Whenever the swf loaded with the loader has a combo box, the
box does not work properly. When you select an item, sometimes you
get that item, the one above it, one 2 after it, etc. I have no
idea why this is happening and would greatly appreciate some help.
I'll attach my small segment of loading code, maybe the problem is
there but I don't see it.
The function launcher is called by the buttons with a string
to the location of the swf. The loader is able to find these swf's
but the combo boxes just do not work properly.It appears that it was some sort of cache problem. I cleared
all the private data in my browser and it worked with no problems
with the new 3.0. I thought I did that the other day but I must not
have. It's now working just fine. -
Hi guys..
I tried to built a project with AS3 only in Flex. When I run the project in flex, everything looks fine, but when I export the release build, the images that are supposed to be added are gone. I appreciate if someone can help me about it.
init();
public function init(loadedVideoCount:Number):void{
singleHolder=new singleVideoCont();
singleHolder.x=loadedVideoCount*singleHolder.width+2;
singleHolder.y=6;
singleHolder.buttonMode=true;
addChild(singleHolder);
this.addEventListener(MouseEvent.CLICK,onClick);
showTn();
private function showTn():void{
imgLoader = new Loader();
imgLoader.load(new URLRequest(_tnPath));
imgLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onProgress);
imgLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoaded);
private function onImgLoaded(event:Event):void {
singleHolder.progBar.alpha = 0;
var image:Bitmap = imgLoader.contentLoaderInfo.content as Bitmap;
image.width=TN_WIDTH;
image.height=TN_HEIGHT;
image.x=3;
image.y=3;
singleHolder.addChild(image); //this line work when I run the project inside flex but the images are gone when I test my release build...
imgLoader.contentLoaderInfo.removeEventListener(ProgressEvent.PROGRESS,onProgress);
imgLoader.contentLoaderInfo.removeEventListener(Event.COMPLETE,onImgLoaded);
//imgLoader = null;The link you provided is to the SWF file, not to an HTML
file, so no one can test your HTML file.
Have you checked the code for the embedding of the SWF file
in your HTML file? I don't use Dreamweaver much, but I do know that
if you start assembling a Dreamweaver file without first saving the
HTML, embedded graphics and other items are inserted as direct
links to the files on your computer, rather than as relative paths.
There is one other possible issue: I note that your swf is
called CWABanner.swf. Depending on your FTP settings, it is
possible that your server is forcing all file names to lower case
(a common practice). Which means the file on your server will be
cwabanner.swf. Again, depending on how the web server is set up, if
it is case sensitive, it will treat CWABanner and cwabanner as
separate files. So if the HTML calls CWABanner.swf, but the FTP
upload has forced a rename to lower case to cwabanner.swf, the HTML
file will not find it. Check this out, or to be absolutely certain,
rename everything to lower case: the file name itself and the
reference in the HTML file. -
SWF file not working properly in Explorer
I have made a kind of slide show showing jpg images loaded
from the web in an swf file, and it will not work properly. It is
my first .swf application, and I am using the free downloadable
FlashObject.js to load the swf into the browser. The problem is
that it sometimes loads perfectly, while other times it will not
work at all! It is not the paths, because I have tried setting the
images in the same directory as the swf, and not importing the
image names thru flashVars. What drives me mad is that it works
consistently in Explorer, the first time I load it, and the first
time after I have cleared the temporary internet files. Otherwise
it will not load at all. In Firefox however, if randomly fails to
load about one time out of ten or something like that. The code is
compiled using the free downloadable compiler. Anyone have any idea
what may be wrong?I may be late but better late then...
Not true
You can nest hundreds of layers as long as all symbols are graphics.
People try to use a Movie symbol and this is script executed.
I am animator on cartoon all done in flash and we have dozens or more NESTS!!!!
Eyes inside of head inside of Character in car on stage...
many
Trick to not crashing is in FLASH
Set publish settings to FLASH 8.
Never use FLASH 9 with Actionsscript 3... This adds a lot of instability.
1 of these swfs in a project could kill it.
I render SWF at 30fps at 1920x1080 then into AE, then scale down to SD wide screen resolution 720x480 16x9.. set scale to 45.5 x 44.5 percent.
I output final animation at Quicktime ANIMATION 100 millions of colors... 1.21 (16x9)audio added at 48k
I have hundreds of hours trying to make this work reliably and finally I got the mix.
Then I take QT to Premiere for final edit, audio and titles.
Good luck
NATMAX
Maybe you are looking for
-
Can't import songs and ones in library only play for 45 seconds
I'm in the process of moving my music collection to a new computer with a bigger hard drive. I installed the latest version of iTunes on the new computer, copied all the folders and contents of the itunes folder to the new computer in the same locati
-
CS3 to CS5 Upgrade - Compatibility Issues...?
Our company is thinking of upgrading to Adobe CS5 and will therefore have to upgrade hardware as well (running Power PC based Macs throughout the art and prepress departments). From what I've heard CS5 only works on Intel based Macs? They are wanting
-
Certificate Name and Expirty Date is not saved in Certificate Manager
The following scenario is happening for few cases: * Firefox shows "Add Exception" for the certificate * The certificate is added as permanent exception. * Go to Firefox -> Tools -> Options -> Advanced -> View Certificates * Go to Servers Tab * The c
-
Hide or delete row based on it's value?
If I have a column called "Name" and I want to delete or hide all the rows which include the name "smith" or alternatively all the rows with "Miss" how do I do this? I know I can manually search to find the name "smith" but I have 60,000+ rows in my
-
when I try to use loadjava to import a Java Class, it fail with ORA-03113. After that all the function in package DBMS_JAVA cannot function. I try to reinstall the JVM, but the problem still happen. Below is the trace file which generate by the loadj