Swing problem: table is not refreshed when i open it from jdialog
Hi , my situation is this one :
1. i have a swing form.
2. i have created a panel form where i have a drop down list and a table. wich are depndend with each other. When i choose an item to the drop down list the value in the table is changed.
3. i invoke this panel into the form with drag and drop, with invoke jDialog from button option.
4. First time i run the form and open the panel from button the drop down list and the table are working correctly.
5. i close the panel and open it again: And at this time when i choose an item from drop down list the table is not refreshed anymore. I have to run the form again if i want that this panel to work correctly.
Am i doing smth wrong? I dont have too much experience in swing , and the documentation for adf-swign are really poor .
Ps: Maybe i should explain the way i have created the drop down list and table in the panel . i am not using smth like execute with parameters for the view in the table. I have created a link between the view in the drop down list and the view in the table. It seems they work correcly if i run the panel for the first time.
Thanks in advance !
To answer your question, Restore the iPhone with current iTunes on your computer. If fixed, it was software. If still problem, most likely hardware, and then make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.
Similar Messages
-
Splitter Problem - ALV Grid not refreshed when selected another item
Hi Experts!!
I have a container on screen 100 which has to be split into 3 areas. Left area ->tree, Right top area -alv grid and bottom also alv grid. I created the program without splitter and it was working fine. After I added this splitter, I see that in ALV grid, the data is not being refreshed. When double clicked on an item in tree struct, ALV grid (CL_SALV_TABLE) to be shown.. Firstly it's fine but when I double click on another item, it's not refreshing the data but is showing the same previous data.
I have searched existing posts and implemented, but no luck.
PFB my code:
* In PBO of screen 100
CREATE OBJECT go_cc_area1
EXPORTING
container_name = 'CC_AREA1'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
MESSAGE e025 WITH sy-subrc.
ENDIF.
CREATE OBJECT go_splitter
EXPORTING
parent = go_cc_area1
orientation = 1 "Vertical split
sash_position = 40
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
ENDIF.
go_container_tree = go_splitter->top_left_container.
go_container_2 = go_splitter->bottom_right_container.
CREATE OBJECT go_splitter_2
EXPORTING
parent = go_container_2
orientation = 0 "Horizontal split
sash_position = 40
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
ENDIF.
go_cc_area2 = go_splitter_2->top_left_container.
go_cc_area3 = go_splitter_2->bottom_right_container.
CREATE OBJECT go_tree
EXPORTING
i_parent = go_container_tree
i_node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
i_item_selection = gc_x
i_no_html_header = gc_x
i_no_toolbar = space
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
illegal_node_selection_mode = 5
failed = 6
illegal_column_name = 7.
CALL METHOD go_tree->set_table_for_first_display
EXPORTING
i_background_id = space
is_layout = gs_layout
CHANGING
it_sort = gt_sort
it_outtab = gt_tree_output
it_fieldcatalog = gt_fieldcat_tree.
CALL METHOD go_tree->expand_tree
EXPORTING
i_level = 2.
* End - PBO 100
* CLASS lcl_tree_event_receiver DEFINITION
CLASS lcl_tree_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS: handle_item_double_click
FOR EVENT item_double_click OF cl_gui_alv_tree_simple
IMPORTING fieldname
index_outtab
grouplevel.
ENDCLASS. "lcl_tree_event_receiver DEFINITION
* CLASS lcl_tree_event_receiver IMPLEMENTATION
CLASS lcl_tree_event_receiver IMPLEMENTATION.
METHOD handle_item_double_click.
IF go_alv_area2 IS BOUND.
go_alv_area2->refresh( ).
ENDIF.
cl_salv_table=>factory(
EXPORTING
list_display = space
r_container = go_cc_area2
IMPORTING
r_salv_table = go_alv_area2
CHANGING
t_table = gt_table ).
go_alv_area2->display( ).
ENDMETHOD. "handle_item_double_click
ENDCLASS. "lcl_tree_event_receiver IMPLEMENTATION
I am facing the same problem with area 3 as well. Can somebody please help me out.
Thanks a lot!!
Edited by: Srinivas Kalluri on Jan 28, 2012 1:39 PMHi All,
I am still facing this problem. Can somebody please help me out?
I created a test program wth sflight and spfli tables. Can somebody look into this and tell me where I am going wrong?
On screen 100 i have one cust container named CC.
When I test it, it's showing the same refresh problem. But in this test program refresh is atleast happening once.
REPORT ztest.
PARAMETERS: p_carrid TYPE sflight-carrid.
CLASS lcl_tree_event_receiver DEFINITION DEFERRED.
CONSTANTS: gc_x VALUE 'X'.
DATA: go_cc_area1 TYPE REF TO cl_gui_custom_container,
go_tree TYPE REF TO cl_gui_alv_tree_simple,
go_tree_event_receiver TYPE REF TO lcl_tree_event_receiver,
go_cc_area2 TYPE REF TO cl_gui_container,
go_alv_area2 TYPE REF TO cl_salv_table,
go_cc_area3 TYPE REF TO cl_gui_container,
go_columns TYPE REF TO cl_salv_columns_table,
go_cc_editor TYPE REF TO cl_gui_custom_container,
go_editor TYPE REF TO cl_gui_textedit,
go_content TYPE REF TO cl_salv_form_element,
go_container_tree TYPE REF TO cl_gui_container,
go_container_2 TYPE REF TO cl_gui_container,
go_splitter TYPE REF TO cl_gui_easy_splitter_container,
go_splitter_2 TYPE REF TO cl_gui_easy_splitter_container,
go_cc_comp TYPE REF TO cl_gui_custom_container,
go_alv_comp TYPE REF TO cl_salv_table.
DATA: gt_sflight TYPE TABLE OF sflight,
gt_data TYPE TABLE OF spfli,
gt_fieldcat TYPE lvc_t_fcat,
gt_sort TYPE lvc_t_sort,
gs_sflight TYPE sflight,
gs_layout TYPE lvc_s_layo.
* CLASS lcl_tree_event_receiver DEFINITION
CLASS lcl_tree_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS: handle_item_double_click
FOR EVENT item_double_click OF cl_gui_alv_tree_simple
IMPORTING fieldname
index_outtab
grouplevel.
ENDCLASS. "lcl_tree_event_receiver DEFINITION
* CLASS lcl_tree_event_receiver IMPLEMENTATION
CLASS lcl_tree_event_receiver IMPLEMENTATION.
METHOD handle_item_double_click.
READ TABLE gt_sflight INTO gs_sflight INDEX index_outtab.
IF sy-subrc EQ 0.
SELECT * FROM spfli INTO TABLE gt_data WHERE connid = gs_sflight-connid.
IF go_alv_area2 IS BOUND.
go_alv_area2->refresh( ).
cl_gui_cfw=>flush( ).
ENDIF.
cl_salv_table=>factory(
EXPORTING
r_container = go_cc_area2
IMPORTING
r_salv_table = go_alv_area2
CHANGING
t_table = gt_data ).
go_alv_area2->display( ).
ENDIF.
ENDMETHOD. "handle_item_double_click
ENDCLASS. "lcl_tree_event_receiver IMPLEMENTATION
START-OF-SELECTION.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
* SET TITLEBAR 'xxx'.
CREATE OBJECT go_cc_area1
EXPORTING
container_name = 'CC'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
* MESSAGE e025 WITH sy-subrc text-e01.
ENDIF.
CREATE OBJECT go_splitter
EXPORTING
parent = go_cc_area1
orientation = 1 "Vertical split
sash_position = 25
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE e025 WITH sy-subrc text-e02.
ENDIF.
go_container_tree = go_splitter->top_left_container.
go_container_2 = go_splitter->bottom_right_container.
CREATE OBJECT go_splitter_2
EXPORTING
parent = go_container_2
orientation = 0 "Horizontal split
sash_position = 40
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE e025 WITH sy-subrc text-e02.
ENDIF.
go_cc_area2 = go_splitter_2->top_left_container.
CREATE OBJECT go_tree
EXPORTING
i_parent = go_container_tree
i_node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
i_item_selection = gc_x
i_no_html_header = gc_x
i_no_toolbar = space
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
illegal_node_selection_mode = 5
failed = 6
illegal_column_name = 7.
IF sy-subrc <> 0.
* MESSAGE e025 WITH sy-subrc text-e03.
ENDIF.
SELECT * FROM sflight INTO TABLE gt_sflight WHERE carrid EQ p_carrid.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SFLIGHT'
i_bypassing_buffer = gc_x
CHANGING
ct_fieldcat = gt_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE e025 WITH sy-subrc text-e05.
ENDIF.
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
LOOP AT gt_fieldcat INTO ls_fieldcatalog.
ls_fieldcatalog-col_opt = gc_x.
CASE ls_fieldcatalog-fieldname.
WHEN 'CARRID'.
ls_fieldcatalog-no_out = gc_x.
WHEN 'CONNID'.
ls_fieldcatalog-no_out = gc_x.
ENDCASE.
MODIFY gt_fieldcat FROM ls_fieldcatalog.
CLEAR ls_fieldcatalog.
ENDLOOP.
DATA: ls_sort TYPE lvc_s_sort.
ls_sort-spos = 1.
ls_sort-fieldname = 'CARRID'.
ls_sort-up = gc_x.
APPEND ls_sort TO gt_sort.
ls_sort-spos = 2.
ls_sort-fieldname = 'CONNID'.
ls_sort-up = gc_x.
APPEND ls_sort TO gt_sort.
DATA: lt_events TYPE cntl_simple_events,
lo_l_event TYPE cntl_simple_event.
lo_l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
APPEND lo_l_event TO lt_events.
lo_l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
APPEND lo_l_event TO lt_events.
lo_l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
APPEND lo_l_event TO lt_events.
lo_l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
APPEND lo_l_event TO lt_events.
lo_l_event-eventid = cl_gui_column_tree=>eventid_item_double_click.
APPEND lo_l_event TO lt_events.
lo_l_event-eventid = cl_gui_column_tree=>eventid_button_click.
APPEND lo_l_event TO lt_events.
lo_l_event-eventid = cl_gui_column_tree=>eventid_node_double_click.
APPEND lo_l_event TO lt_events.
CALL METHOD go_tree->set_registered_events
EXPORTING
events = lt_events
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
illegal_event_combination = 3.
* Set Handler
CREATE OBJECT go_tree_event_receiver.
SET HANDLER go_tree_event_receiver->handle_item_double_click FOR go_tree.
CALL METHOD go_tree->set_table_for_first_display
EXPORTING
i_background_id = space
is_layout = gs_layout
CHANGING
it_sort = gt_sort
it_outtab = gt_sflight
it_fieldcatalog = gt_fieldcat.
CALL METHOD go_tree->expand_tree
EXPORTING
i_level = 2.
IF NOT gt_sflight[] IS INITIAL.
CALL METHOD go_tree->set_top_node
EXPORTING
i_index_outtab = 0.
ENDIF.
* Send data to frontend.
CALL METHOD go_tree->frontend_update.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'BACK'.
SET SCREEN 0.
LEAVE SCREEN.
WHEN OTHERS.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
Edited by: Srinivas Kalluri on Jan 31, 2012 4:49 PM -
Solved af:table is not refreshed with updated MBean data from list even
Hi,
I have a af:table which gets its data from a Managed Bean List type varaiable.
My table hav one lov as a row item.
When i change the lov in each row... a new row should get added to the table.
So in the value change listener of the selectOneChoice i added one element to the list.
Enabled PPR on table.
But table is not getting refreshed until i click on some button or link.
Thanks
Murali
Message was edited by:
Murali ChepuriSolved after adding partialtarget in ValueChangeListener.
Thanks
Murali -
Firefox is "not responding" when I open it from my desktop.
PLEASE HELP.... When I click on Mozilla Firefox from my desktop to open it the Home Page/Yahoo comes up but will not go any further when I click on something or attempt to open another tab. At the top it states (Not Responding). I have to go into the Task Manager to close it down.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Excel 2010 Pivot Table VBA Not Refreshing Table
My company recently upgraded from Excel 2003 to 2010. I had VBA written to take source data and convert it into a number of Pivot Tables on a number of worksheets. It has been working fine for years. After upgrading to 2010 the VBA crashed. I tracked it
down to the fact that when my code was making changes to the Pivot Tables (changing fields, filters, etc...) the pivot table on the worksheet had no data, but the fields were there. I can manually go to the pivot table and manually refresh and all the data
comes in.
So I tried adding the VBA code to refresh the pivot table, but the pivot tables will not refresh with data.
I tried:
ActiveSheet.PivotTables("WO Pivot").RefreshTable
and
ActiveWorkbook.RefreshAll
And these did not work.
I also tried recording a macro for the manual steps to refresh and got:
ActiveSheet.PivotTables("WO Pivot").PivotCache.Refresh
This does not work either.
The PivotTable name is correct, but I tried using the number as well, and the name works for other code manipulating the the pivot table.
e.g.:
With ActiveSheet.PivotTables("WOPivot").PivotFields("Task Title")
.Orientation = xlRowField .Position = 2
.Subtotals = Array(False, False, False, False, False, False, False, False, False, False, _False, False)
End
With Why isn't this working? Is there another way to refresh pivot table data in 2010?
Thanks. P.S. I've tried formating this so it is readable, but it comes out garbled. Hope this looks better.The solution above didn't work for me, but the following did the trick:
ActiveSheet.PivotTables("WOPivot").PivotCache.Refresh
By the way, I identified it by recording a macro, then going on the Pivot Table that needed refreshing and pressing F9 to refresh it. The line of VBA code above was the result.
Cheers,
Marco. -
Table is not refreshing after comming
Hi Experts,
Working in JDEV 11.1.1.3.0 with ADF BC.
I am updating the selected rows when the file download is done, in the same method i am coming the recording and reexecuting my VO and adding partial trigger as my table component, but still my table is not refreshing.
Code:
public void commitRows(RowData rowData){
rowData.setAttribute("PrintState", "PRINTED");
DCIteratorBinding printIter =
ADFUtils.findIterator("XxwfsAvcardPrintInterfaceVO1Iterator");
ADFUtils.invokeEL("#{bindings.Commit.execute}");
printIter.getViewObject().executeQuery();
AdfFacesContext.getCurrentInstance().addPartialTarget(printTB);
// ADFUtils.invokePopup(this.getP2().getClientId(FacesContext.getCurrentInstance()));
}Thanks for your reply Suganth.
i don't have partial submitt on the button.
My requirement is i am updating selected row on the table and at the same time i am downloading file, after download is finish selected row is updating properly but that row is still apearing on the table, if the user click on download button once again then i am getting null pointer exception, because the row is not there on the table it got updated.
Because of file download table refresh is blocking, how should i need to refresh my table on file download method.
Edited by: user5802014 on Aug 26, 2010 8:39 AM
Edited by: user5802014 on Aug 26, 2010 9:05 AM -
Image does not refresh when I undo
This seems only to happen when using my Wacom. A lot of friends have the same problem.
The viewport/canvas does not refresh when undoing a paint stroke done with my Wacom Intuos4 Wireless. But when I make a new paint stroke or zoom in or something else that requires the viewport to refresh it looks correct. I am using Photoshop CS5.1 (Production Premium CS5.5). I am running Mac OS X Lion on a MacBook Pro 13" 2011.
Anyone else having this issue? It seems like a nasty bug to me.OK, I have done some testing and this happens on three friends computers. What we have in common is Wacom Tablets (different kinds, intous3, intuos4, bamboo and intuos4wl), Photoshop CS5.5, OS X Lion and Macbook 13" 2011.
However, another friend just bought a new intuos4wl for his Macbook Pro 15" late 2008 (MacBook Pro5,1) thats running Snow Leopard. So far this seems to only happen with wacoms + cs5.5 + lion. And another friend is running CS5 on a MacBook Pro 13" 2011 without problems.
I would say that the problem is PS CS5.1 in conjunction with Lion and Wacom tablets. Scratch what I said earlier about external monitors. -
my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help
Hey nocillado,
Thanks for using Apple Support Communities.
It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Using the same Apple ID for Store purchases and iCloud (recommended)
Have a nice day,
Mario -
After installing Exchange 2010 SP3 RU3, I had an issue in Public Folders, once having group by categories in Outlook, the Group of "(None)" categories is not refreshing when changing flag... I also installed RU4 but nothing changed, any reason
ThxHi,
From your description, the group with none categories won’t fresh when changing flag in Category view. If I misunderstood, please point it out.
As you can in the View tab as below, there is Category as well as Flag: Start date or Due Date. It means that grouping per color categories is more or less different from that
grouping by flag.
Should you need more assistance, feel free to tell me.
Regards,
Rebecca Tu
TechNet Community Support -
I am having problems gettting my mail to work ... Mac telling me that my start up disk id full and to delete some files to free up space ... have done this but when i open mail from the dock it just brings up the colour wheel and nothing happening ... it shows when you right click on the mail icon that " application not responding"
If your hard drive is getting full, you need to free up, at least, 20 GBs of space on your iMac's hard drive.
If your Mac is running a fairly recent version of OS X, here are some general guidelines.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Other things you can do to gain space.
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it run the automatic ans S.M,A.R.T. tests, then go to the cleaning and maintenance tabs and run the tabs that have the ability to clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck! -
Thunderbolt ethernet not working when computer wake up from sleep.
thunderbolt ethernet not working when computer wake up from sleep.
it will not happen in Mountain loin.I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
In this case the problem was related to mDNSResponder task which handles all dns queries.
It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
QUESTION: Is your problem independent of the access point / router you connect to.
I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
Software is of poor quality. Not much more to say in this matter.
I found a very interesting article dated 1996 about programming which I think is still valid.
Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
Below the fragment (with some connection to Apple)
Software is everything. It also s***s.
"It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage." -
Commenting functionality not available when I open a pdf in air application
commenting functionality not available when I open a pdf in
air application. Adobe documentation says that is expected with
adobe air 1.0 but I still have the same problem even if I use the
latest air runtimeBack up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
When I click on a link in gmail it will open the website as a black page. When I click anywhere on the page it turns completely white with nothing there. This does not happen when I open the same link in IE
== URL of affected sites ==
http://allDo you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
Just upgraded my system to snow leopard...now when I open documents from my memory stick, its in 'pages' not word...how do I fix that??
Did you click on the little triangle? Did you select one of the document files before pressing COMMAND-I to open the Get Info window? If the panel is closed it looks like this:
If you then click on that little triangle gadget you get this:
A temporary solution is to CTRL- or RIGHT-click on the document file, navigate to the Open With item, and select from the sub-menu.
The first method makes the association permanent. This method only applies to the currently selected document. -
My iPhone camera will not open up. When I press on the icon it open and closes quickly. When I open it from my home screen it reboots my phone. What should I do?
Tried that and it still isn't working. Not sure if it's software thing but I just noticed when I swipe up my control center the flashlight option is not available as well. I'm not sure why this is. I have a 5s with the newest software. That's for the suggestion
Maybe you are looking for
-
No sound after I export a video in premiere elements 12
Alright I am doing a walkthrough on a video game so I am deleting audio out of my clips and adding in narration. While I can hear and see my narration just fine in one of my videos, when I export it I hear no narration or sound at all. I have tried a
-
LocalConnection - lag in IE and Safari
Hi all, I'm using the LocalConnection class (Flash MX 04 / ActionScript 2.0) to communicate between two SWF files within the same HTML page. When I run the page in IE (5.5 and 6) or Safari, there is a significant time lag (I'm talking seconds, not mi
-
IMac wakes from sleep when touching nothing.
So my iMac wakes when I just put it on sleep mode. Is it the update? idk please help!!!! Thanks
-
Installing GB 1.0 or 2.0 on ibook 600MHz
My school has 5 iBooks without DVD drives. They are the 600 MHz models with 2 USB/1firewire (2.5 - 3 yrs. old). They will be upgraded to 384 megs ram and are running 10.2.8 (I think?). Can I install ANY version of GB onto these? Is there a multi-CD i
-
HI, I need to create sales orders using BAPI. these sales orders are different sales order type and it need to upload from excel file. anyone send me some sample programs for this one. kathir.