Table is not refreshing after comming

Hi Experts,
Working in JDEV 11.1.1.3.0 with ADF BC.
I am updating the selected rows when the file download is done, in the same method i am coming the recording and reexecuting my VO and adding partial trigger as my table component, but still my table is not refreshing.
Code:
public void commitRows(RowData rowData){
rowData.setAttribute("PrintState", "PRINTED");
DCIteratorBinding printIter =
ADFUtils.findIterator("XxwfsAvcardPrintInterfaceVO1Iterator");
ADFUtils.invokeEL("#{bindings.Commit.execute}");
printIter.getViewObject().executeQuery();
AdfFacesContext.getCurrentInstance().addPartialTarget(printTB);
// ADFUtils.invokePopup(this.getP2().getClientId(FacesContext.getCurrentInstance()));
}

Thanks for your reply Suganth.
i don't have partial submitt on the button.
My requirement is i am updating selected row on the table and at the same time i am downloading file, after download is finish selected row is updating properly but that row is still apearing on the table, if the user click on download button once again then i am getting null pointer exception, because the row is not there on the table it got updated.
Because of file download table refresh is blocking, how should i need to refresh my table on file download method.
Edited by: user5802014 on Aug 26, 2010 8:39 AM
Edited by: user5802014 on Aug 26, 2010 9:05 AM

Similar Messages

Table does not refresh after database level action

We have defined an Advanced table on a VO to represent invoice lines. The VO is referenced by a VL from the invoice header.
At one point during our process, a database level package is executed on the current lines. We have a "Requery" button to refresh the lines, however, the lines do not refresh unless we exit the invoice entirely and come back to it via the VL.
How can we refresh the lines on a current table after a database level transaction occurs?
Thanks, Jerry.
Our AM code is as follows...
// handleRefreshInvoiceLines( )
public void handleRefreshInvoiceLines()
OAViewObject vo = (OAViewObject)getInvoiceLinesVO1( );
if( !vo.isPreparedForExecution( ) )
getTransaction( ).validate();
vo.executeQuery( );
clearVOCaches( "InvoiceLinesEO", true ); // troubleshooting
} // handleRefreshInvoiceLines()

Thank you. I've moved clearCache around a bit. apparently vo.isPreparedForExecution() is false. I wonder why?
--Jerry.

Advanced Table does not refresh after database level action

Hi,
I have a page which has an advanced table. I update the advanced table from the page do some validations, update some DB level columns(also part of advanced table) and see that the changes are saved to the DB but the advanced table does not show the updates done at the DB level.
I tried clearing the VO Cache and re-executing the VO but still it does not refresh the Advanced table data.
This is very critical requirement for the client, any inputs will be greatly appreciated.
Thanks a lot in Advance.
Here is the code snippet from my CO's processRequest:
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAAdvancedTableBean tblbean = (OAAdvancedTableBean)webBean.findChildRecursive("recasttable");
if(tblbean!=null)
tblbean.setRendered(true);
OAApplicationModule tblam = (OAApplicationModule)am.findApplicationModule("RecastLineAM1");
tblam.invokeMethod("initQuery");
tblbean.getTableData();
Here is my AM - initQuery() code:
public void initQuery()
//clearVOCaches("RecastLineEO",true);
clearVOCaches(null,true);
getRecastLineVO1().init();
Here is the VO - init() code:
public void init()
System.out.println("****************************executing...");
OADBTransaction tx = (OADBTransaction) getApplicationModule().getTransaction();
if (tx.getTransientValue("RECAST_ID") !=null)
Number recastId = (Number) tx.getTransientValue("RECAST_ID");
System.out.println("recastId: "+ recastId);
setWhereClause("RECAST_HDR_ID = :1");
setWhereClauseParams(null); // Always reset
setWhereClauseParam(0, recastId);
executeQuery();
}

hi,
This is how I am calling a DB package. the package does updates on the table. once done I am issueing a commit and requerying the data, however the vo is not getting refreshed.... Can someone point out what am I missing... why is the VO not getting refreshed....
This is very critical...
Thanks
Srini
public void validateRecast(String respKey)
OADBTransaction tx = (OADBTransaction)getApplicationModule().getTransaction();
Number recastId = (Number) tx.getTransientValue("RECAST_ID");
System.out.println("*********************validateRecast().RecastId: " + recastId);
OracleCallableStatement ocs = null;
Connection conn = tx.getJdbcConnection();
String strOut="", strErr="";
Number respId = null;
try
respId = new Number(respKey);
catch(Exception e)
throw new OAException("Invalid Responsibility");
String stmt = "BEGIN " +
"GE_RECAST_UTILS_PKG.validate_recast(:1,:2,:3,:4); " +
"END;";
try
ocs = (OracleCallableStatement)conn.prepareCall(stmt);
ocs.setNUMBER(1,recastId);
ocs.setNUMBER(2,respId);
ocs.registerOutParameter(3,OracleTypes.VARCHAR);
ocs.registerOutParameter(4,OracleTypes.VARCHAR);
ocs.execute();
strOut = ocs.getString(3);
strErr = ocs.getString(4);
ocs.close();
System.out.println("Returned with: " + strOut);
if(strOut.equalsIgnoreCase("ERROR"))
//throw new OAException(strErr);
tx.putTransientValue("ERROR",strErr);
tx.commit();
getApplicationModule().clearVOCaches("RecastLineEO",true);
RecastLineVOImpl lineVo = (RecastLineVOImpl)getApplicationModule().findViewObject("RecastLineVO1");
lineVo.init();
System.out.println("===============RecastLnId: " +lineVo.first().getAttribute("RecastLnId"));
System.out.println("===============Product Line: " +lineVo.first().getAttribute("ProductLine"));
catch(SQLException e)
tx.rollback();
if(ocs!=null)
try
ocs.close();
}catch(SQLException e1)
throw OAException.wrapperException(e1);
throw OAException.wrapperException(e);
}

Management Studio 2008 does not refresh after table create / alter

hello
Management Studio 2008 does not refresh after table create / alter, why?
f5 / refresh button does not work in "Object Explorer".... i always need the restart the whole application to see any changes, this is strange...
regards, jan

Hi jm,
I’m writing to follow up with you on this post. Was the problem resolved after performing Vishal ‘s steps? If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
or concerns you may have.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Excel 2010 Pivot Table VBA Not Refreshing Table

My company recently upgraded from Excel 2003 to 2010. I had VBA written to take source data and convert it into a number of Pivot Tables on a number of worksheets. It has been working fine for years. After upgrading to 2010 the VBA crashed. I tracked it
down to the fact that when my code was making changes to the Pivot Tables (changing fields, filters, etc...) the pivot table on the worksheet had no data, but the fields were there. I can manually go to the pivot table and manually refresh and all the data
comes in.
So I tried adding the VBA code to refresh the pivot table, but the pivot tables will not refresh with data.
I tried:
ActiveSheet.PivotTables("WO Pivot").RefreshTable
and
ActiveWorkbook.RefreshAll
And these did not work.
I also tried recording a macro for the manual steps to refresh and got:
ActiveSheet.PivotTables("WO Pivot").PivotCache.Refresh
This does not work either.
The PivotTable name is correct, but I tried using the number as well, and the name works for other code manipulating the the pivot table.
e.g.:
With ActiveSheet.PivotTables("WOPivot").PivotFields("Task Title")
.Orientation = xlRowField .Position = 2
.Subtotals = Array(False, False, False, False, False, False, False, False, False, False, _False, False)
End
With Why isn't this working? Is there another way to refresh pivot table data in 2010?
Thanks. P.S. I've tried formating this so it is readable, but it comes out garbled. Hope this looks better.

The solution above didn't work for me, but the following did the trick:
ActiveSheet.PivotTables("WOPivot").PivotCache.Refresh
By the way, I identified it by recording a macro, then going on the Pivot Table that needed refreshing and pressing F9 to refresh it. The line of VBA code above was the result.
Cheers,
Marco.

Screen not refreshing after sleep mode

Hello All,
I have had a problem since 10.7.XX where my screen does not refresh after the computer goes into screen saver mode and then into sleep mode. When I move my mouse to resume i get a line drawn where I move my mouse and it reveals the login screen slowly. I can click on a login account and a small section of the screen refreshes where the login password is. Once I login it goes away. Was hoping Mountail Lion would address, but the problem continues from Snow Leopard. I am on a Imac 24" 2009 3.06Ghz dual core with 4 Gig of Ram, Nvidia GeForce 8800 GS 512mb. Thanks in advance for any advice.
Chad

Hello,
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

Table space not reduce after delete in oracle 11G

Hi Team,
I have a DB 11.1.0.7 on unix.
I have execute delete tables on tablespace, but this not reduce.
Thanks

935299 wrote:
What segment space management type is defined for the tablespace in question?
MANUAL
Then you should check out the documentation some more.
But even if you shrink the table segement what is that going to do for the data file size?
I don't undertand you.
ThanksYour thread is titled "Table space not reduce after delete in oracle 11G" which implies to me that you are interested in reducing the size of a tablespace (which really means reducing the size of the underlying datafile(s)).
So, if you shrink the size of the sys.aud$ table, will that cause the datafile(s) to become smaller? Will it accomplish your goal? What else, if anything, needs to happen?

Manual rebate condition exclusion not refreshed after redetermination of it

Hi Experts.
I am working with CRM 4.0.
Lately, we realized there is an error occurring in the price deternination:
The condition exclusion for manual rebate condition is not refreshed after redetermination of the product. There is missing a price validation before saving the document with the new product.
Step-to-step description of the error:
1)     I am creating an order in trx. CIC0 or CRMD_BUS2000115 and determine the product (sector A).
2)     Now I assign a manual rebate (condition Z...) of 20 % on item level.
3)     On header level I replace the product to one of another sector (B).
4)     I check the pricing conditions of the new product on item level. The same rebate of 20 % is maintained.
This is an error, because the condition exclusion for products of sector B allows rebates only until 5 %.
Can anybody help me, please.
Best regards,
Cristina

This is not standard due to information of SAP OSS.

Swing problem: table is not refreshed when i open it from jdialog

Hi , my situation is this one :
1. i have a swing form.
2. i have created a panel form where i have a drop down list and a table. wich are depndend with each other. When i choose an item to the drop down list the value in the table is changed.
3. i invoke this panel into the form with drag and drop, with invoke jDialog from button option.
4. First time i run the form and open the panel from button the drop down list and the table are working correctly.
5. i close the panel and open it again: And at this time when i choose an item from drop down list the table is not refreshed anymore. I have to run the form again if i want that this panel to work correctly.
Am i doing smth wrong? I dont have too much experience in swing , and the documentation for adf-swign are really poor .
Ps: Maybe i should explain the way i have created the drop down list and table in the panel . i am not using smth like execute with parameters for the view in the table. I have created a link between the view in the drop down list and the view in the table. It seems they work correcly if i run the panel for the first time.
Thanks in advance !

To answer your question, Restore the iPhone with current iTunes on your computer. If fixed, it was software. If still problem, most likely hardware, and then make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.

Deleting the Row from the table is not refreshing the contents in the form

Hi,
We developed a table and form in the same UI based on the following suggestion.
Display and edit currently selected row of ADF Table in ADF Form
1. Created one view object based on the employees table.
2. dragged the view object to the UI as table.
3. dragged the view object as form.
4. set partial triggers on the form's container (panelformlayout) as tableId.
Tested the application with the edit options and everything is working fine. But the problem comes when we delete the record from table. it is not refreshing the form based on the newly selected row after deleting the record. If we commit the data the form contents are updated to the selected row (which is not desired).
Can you please suggest how to fix the issue, refreshing the form with the selected row after deleting the records.
Thanks and Regards,
S R Prasad

The Code snippet looks fine. I think, the issue is in the partial trigger setting
4. set partial triggers on the form's container (panelformlayout) as tableId.In order to the table to get refreshed, the table's partialTriggers property should be set to id of the delete Button.
Go to table, select partialTriggers in the Property Inspector, Click on Expression Builder at the right and select the delete Button.
Can you set this and check?
Sample Code:
<af:panelHeader text="panelHeader 1" id="ph1">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar">
<af:commandButton text="Delete" id="cb1"/>
</f:facet>
<f:facet name="legend"/>
<f:facet name="info">
<af:table var="row" rowBandingInterval="0" id="t1"
partialTriggers="::cb1">
<af:column sortable="false" headerText="col1" id="c1">
<af:outputText value="#{row.col1}" id="ot1"/>
</af:column>
<af:column sortable="false" headerText="col2" id="c4">
<af:outputText value="#{row.col2}" id="ot3"/>
</af:column>
<af:column sortable="false" headerText="col3" id="c3">
<af:outputText value="#{row.col3}" id="ot4"/>
</af:column>
<af:column sortable="false" headerText="col4" id="c5">
<af:outputText value="#{row.col4}" id="ot2"/>
</af:column>
<af:column sortable="false" headerText="col5" id="c2">
<af:outputText value="#{row.col5}" id="ot5"/>
</af:column>
</af:table>
</f:facet>
</af:panelHeader>
Thanks,
Navaneeth

Attribute binding value not refreshed after transaction rollback

Hi,
Using ADF Faces/Trinidad + ADF Data Bindings + ADF Business Components.
I was experimenting with task flows vs transaction control vs form validation and met the following problem.
First, here's a little intro to my application design. A page template defines the layout. There's only one page in the application using a dynamic region to show a dynamic task flow. The template defines a menu containing navigation items; each item action changes the current dynamic task flow id.
One of the flow starts with a data bound table listing users. Each row has an edit button to navigate to an edit form. The edit form is in a separate task flow as I want the automatic rollback triggered when a flow is abandoned.
The problem occurs when I quit the form clicking a menu item AFTER a validation error occurred. Transaction is rollbacked as expected, however when I go back to the form (whatever row I choose), the invalid value that failed the previous validation is shown.
It seems the attribute binding is not refreshed. To validate this hypothesis, I added a button that explicitly calls refreshControl on the attribute binding as shown below. When the button is clicked, the form shows the correct value.
    // In a managed bean
    public void refreshFirstName(ActionEvent evt)
        getBindingContainer().findCtrlBinding("FirstName").refreshControl();
    }I working on a possible workaround, but I've not succeeded yet. I'm looking into using the finalizer of the task flow (or possibly the initializer) to force a refresh of the control bindings.
Any ideas?
Thanx!
Olivier

Hi,
I am experiencing similar strange behaviour, it sounds like it could be related, i am not using task flows though.
I have a read only table, and when a user double-clicks on a row an af:popup is displayed which displays an edit form (contentDelivery is set to "lazyUncached" in the popup). Pressing the cancel button on the edit form executes a rollback and hides the popup. However, after this has occurred, whenever another row (or the same row) is selected in the read only table, the edit form will display data from the old record that was rolled back. I've noticed that the old data is only displayed in editable fields, while the correct data is displayed in read-only fields. I'm pretty sure the rollback works properly, and the iterator is on the correct row, just it is displaying incorrect data in the editable text fields. I've tried implementing cancel functionality with both a rollback action and refreshing the row using REFRESH_WITH_DB_FORGET_CHANGES, but the same issue exists regardless of which method is used. I've also noticed that the application starts behaving correctly again if the commit button is pressed.
Has anyone come up with a workaround for this issue?
By the way, is there any way we can keep track of the bug numbers that are mentioned in this forum?
Thanks,
Michael.

Master-Detail Detail does not refresh after it's been empty

I have a master detail page (both are tables) that works just fine, until I click a master record that has no details.
After that the panelHeader of teh detail is refreshed with the PPT but the table underneath it is not, I keep seeing "no rows yet", no matter which master record I click.
When I go to a different page and return it's fine again.
Only one of my pages has this behavior, I tested this on another and it was fine. Has anyone seen this behavior before?
My console has this message:
May 11, 2007 10:52:38 AM oracle.adfinternal.view.faces.model.binding.FacesCtrlRangeBinding$FacesModel getSelectedRow
WARNING: rowIterator is null
Message was edited by:
Wendy Tromp

Ok I found it,
My details iterator had the following properties:
<iterator id="AfdelingMedewerkersIterator" RangeSize="-1"
Binds="AfdelingMedewerkers"
DataControl="PRBAppModuleDataControl"
Refresh="IfNeeded" RefreshCondition="#{!adfFacesContext.postback}" />
I have no idea why I set it like that, but removing the Refresh properties fixed my problem.
I am still clueless as of why this led to the behavior as described above. I could have understood it if my iterator was not refreshed at all, but I have no idea why it stopped working only after the details were empty and not a second before...
Anyway, problem solved!

The detail part of table doesn't refresh after deleting a row

Hello!
I'm developing a Master-Detail table with some a functionality. Particularly, I want to invoke a DELETE function in the Detail part of the table.
For this purpose, I placed a Command button to the tableSelectOne component of the Detail part of the table, which stores current row key and calls another page. On this (<another>) page I created a ReadOnly form with data related to the row of Detail table, which key is stored. In addition, I added there two Command buttons. First of them is a CancelButton, which does nothing except returning to master-detail page. The second is a DeleteButton, which executes a RemoveEntity method and returns to master-detail page, too.
When I'm tried to delete in this way a row from detail part of table, I discovered, that this row is really deleted from the database, but it doesn't affect on the content of the Detail part of the table. Any kinds of refreshing couldn't aid me, only restart of the application.
Could anybody help me to solve this problem?
Thank in advance.

Hi,
I'm facing the same problem but Frank's solution doesn't fix it.
you need to define an invoke action in the binding
for your m/d page and set it into the page binding's
execute section. Then set the condition for invoking
the action to !postback. This will re-execute the
iteratorThis efectively re-executes the iterator, so the master table data is refreshed. You can see the TopLink log showing the query to the db (I'm using TopLink instead of BC). The problem is that the detail rows are queried only once and only the inserts and updates are displayed, not the deletes.
I think the problem may be related to PPR or some cache issue.
See the BC tutorial
http://www.oracle.com/technology/obe/ADFBC_tutorial_10
13/ADFBC_tutorial.pdf
See page 86 "Adding the ServiceHistories Data". This
defines a invoke action for this kinf of task. More
example code is contained in the SRDemo sampleThe tutorial doesn't contain a scenario with master-detail deleting detail records (neither the BC tutorial, nor the TopLink one) so it can't help me :(
The only solution I can think of is using a different model method (a method in the SessionFacade for TopLink) for the detail table (one that takes the master PK as parameter and retrieves the corresponding detail records) and have a selectionListener in the selection component of the master re-execute the method (passing the PK from the master table current row).
Is there a solution that doesn't require the use of a separate method for the detail?
Thanks,
Miguel

NWDS WebDynpro views are not refreshing after changes in layout...

Hello experts..
I'm using NWDS 7.0.13 and every time I'm modifiying a webdynpro view in layout mode the view does not refresh, instead I get this message:
This program cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address.
Go back to the previous page.
More information
In order to display the changes I have made, I have to close the WD View and re open it, the funny thing is my other team mates can change their views and see their changes inmediately without closing/opening the view.. hope anybody can help me out on this one..
Thanx in advance..
JV

Hi Armin, thanx for your answer and effectively I have installed IE7, I read other posts and after reading the "solutions" I rather close and open my WD views insted of removing security patches of IE.. I guess I'll have to wait until SAP fixes this and meanwhile I'll work the way I just mentioned.
I'll let this question unanswered until this fix comes out.
Cheerio !
JV

Solved af:table is not refreshed with updated MBean data from list even

Hi,
I have a af:table which gets its data from a Managed Bean List type varaiable.
My table hav one lov as a row item.
When i change the lov in each row... a new row should get added to the table.
So in the value change listener of the selectOneChoice i added one element to the list.
Enabled PPR on table.
But table is not getting refreshed until i click on some button or link.
Thanks
Murali
Message was edited by:
Murali Chepuri

Solved after adding partialtarget in ValueChangeListener.
Thanks
Murali

Table is not refreshing after comming

Similar Messages

Maybe you are looking for