SXMB_MONI time out - dump

Hi friends,
My transaction SXMB_MONI is getting timed out. till few days back it is working fine, but suddenly now it is getting timed out and the dump is occuring. Please provide me the solution for the same.
Thanks
Prem

Prem,
This might help you
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e01e9400-9e81-2910-20a5-a862945a5e98
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6a90d6aa-0b01-0010-8a83-cf0e6c70dcce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Regards,

Similar Messages

Time Out Dump while extracting data from table CKIS

Dear Friends,
I am getting TIme Out dump for the below code, while extracting data from table CKIS.
Table CKIS doesn't have any Indexes. Please guide me to resolve this.
Regards,
Viji.
form get_keko_ckis.
SELECT kalnr kalka kadky tvers bwvar matnr werks kokrs
         FROM keko
         INTO TABLE i_keko1
         FOR ALL ENTRIES IN i_final_modify
             WHERE matnr = i_final_modify-main_f
               AND werks = p_werks
               AND kokrs = p_kokrs
               AND kadat = p_kadat
               AND bidat = p_bidat
               AND bwdat = p_bwdat.
IF sy-subrc = 0.
    SORT i_keko1 BY kalnr kalka kadky tvers bwvar.
    SELECT kalnr kalka kadky tvers bwvar posnr typps kstar
           matnr menge gpreis
           FROM ckis
           INTO TABLE i_ckis_temp
           FOR ALL ENTRIES IN i_keko1
           WHERE kalnr = i_keko1-kalnr
             AND kalka = i_keko1-kalka
             AND kadky = i_keko1-kadky
             AND tvers = i_keko1-tvers
             AND bwvar = i_keko1-bwvar.
        IF sy-subrc = 0.
          SORT i_ckis_temp BY kalnr kalka kadky tvers bwvar.
          LOOP AT i_ckis_temp INTO wa_ckis_temp.
            wa_ckis-kalnr = wa_ckis_temp-kalnr.
            wa_ckis-kadky = wa_ckis_temp-kadky.
            wa_ckis-posnr = wa_ckis_temp-posnr.
            wa_ckis-typps = wa_ckis_temp-typps.
            wa_ckis-kstar = wa_ckis_temp-kstar.
            wa_ckis-matnr1 = wa_ckis_temp-matnr1.
            wa_ckis-menge = wa_ckis_temp-menge.
            wa_ckis-gpreis = wa_ckis_temp-gpreis.
          CLEAR wa_keko1.
          READ TABLE i_keko1 INTO wa_keko1
                             WITH KEY kalnr = wa_ckis_temp-kalnr
                                      kalka = wa_ckis_temp-kalka
                                      kadky = wa_ckis_temp-kadky
                                      tvers = wa_ckis_temp-tvers
                                      bwvar = wa_ckis_temp-bwvar
                                      BINARY SEARCH.
             IF sy-subrc = 0.
                wa_ckis-matnr = wa_keko1-matnr.
                wa_ckis-werks = wa_keko1-werks.
             ENDIF.
             APPEND wa_ckis TO i_ckis.
             CLEAR: wa_ckis_temp, wa_ckis.
          ENDLOOP.
        ENDIF.
    REFRESH: i_keko1, i_ckis_temp.
ENDIF.
endform.                    " get_keko_ckis

Hi Try minimising the conditions in where clause
     SELECT fields..... FROM CKIS
     WHERE KALNR = KEKO-KALNR AND
                  KADKY = KEKO-KADKY AND
                  TVERS = KEKO-TVERS AND
                  TYPPS = 'M'.
    after this, deleting unwanted records from internal table as per pending conditions...
Regds,
Anil

Performance tuning for a time-out dump

Hi ,
actually there is a following piece of code(a SELECT query) in my program,due to which TIME OUT dump occurs.plz help me to modify the code to reduce it's execution time.
code is:
DATA: at_seque_extref TYPE zprms_ord_ind OCCURS 0 WITH HEADER LINE.
            SELECT (sv_fields) FROM zprms_ord_ind
              APPENDING CORRESPONDING FIELDS OF TABLE at_seque
                 UP TO lv_max_sequs ROWS
                  WHERE process_type    IN lr_process_type
                    AND   posting_date    IN lr_pos_date
                    AND   sol_date        IN lr_sol_date
                    AND   changed_at      IN lr_chg_date
                  AND   external_ref    NE space
                    AND (ls_where)
                    AND   ib_comp_network IN lr_ibc_netw
                    AND   ib_comp_node    IN lr_ibc_node
                    AND   ib_comp_site    IN lr_ibc_site
                ORDER BY (iv_order_by).
            CLEAR at_seque_extref.
            LOOP AT at_seque.
              IF at_seque-external_ref CP is_bus_trans_search-external_ref .
                MOVE-CORRESPONDING at_seque TO at_seque_extref.
                APPEND at_seque_extref.
              ENDIF.
            ENDLOOP.
            CLEAR at_seque[].
*the table at_seque[] type zprms_ord_ind
Or plz suggest me check points to reduce it's execution time.

Hi Ahmed,
Rarther going to appending go for into corresponding field of table at_seque.
Also check the primary key combination before selecting any data into where condition.
Remove that NE condition from where clause because some time it will take time to extract data. GO for delete statement into at_seque after select statement.
This will definitely work.
<b>Rewards points if useful.</b>
Regards,
Kinjal

Getting Time Out Dump while Executing Report

Hello ABAP Experts,
I am trying to execute a report, but while debugging I am getting time out dump on 2nd SELECT statement.
SELECT vbeln
          matnr
          werks
          lgort
          volum
          lgnum
     FROM lips
     INTO TABLE i_volume
     FOR ALL ENTRIES IN i_likp
     WHERE vbeln EQ i_likp-vbeln
    AND lgort IN s_lgort
     AND werks IN s_werks.
IF i_volume[] IS INITIAL.
     MESSAGE text-001 TYPE 'I'.
     STOP.
   ENDIF.
   SORT i_volume BY vbeln.
SELECT matnr
              meinh
          umrez
          umren
     FROM marm
     INTO TABLE gt_marm
     FOR ALL ENTRIES IN i_volume
     WHERE matnr = i_volume-matnr
       AND meinh = 'ME' OR meinh = 'KG'.
   IF sy-subrc EQ 0.
     SORT gt_marm BY matnr.
     DELETE ADJACENT DUPLICATES FROM gt_marm COMPARING matnr.
   ENDIF.
Can you please help me out there ?
Thanks
Swanand

Hi Swanand,
try
     WHERE matnr = i_volume-matnr
       AND ( meinh = 'ME' OR meinh = 'KG' ).
you should also filter first materials to a temporary table with only distinct matnr entries and use it instead of i_volume.
regards,
Edgar

Time Out dump

Hi Experts ,
When i run a particular application and then keep it open for some time .
Then when i try to run it , it gives a dump ..saying " time out "..
Can anyone suggest any alternative for this .
Thank You.
Radhika.

hi
good
go through this link hope this would help you to give the idea about the time out dump.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7fdca26e-0601-0010-369d-b3fc87d3a2d9
reward point if helpful.
thanks
mrutyun^

Select query giving Time out dump

Hi All,
    I have written a select query on a table in BW system.The code for the same is attached below.The table contains some 6,00,000 records.This query is giving a time out error.Kindly look into the query and advice ways to make it work.Thanks.
    IF NOT lt_temp[] IS INITIAL.
      SELECT /bic/zprrmatnr objvers /bic/zprclwynr /bic/zprrmdlr
             FROM /bic/pzprrmatnr
             INTO CORRESPONDING FIELDS OF TABLE lt_zprrmatnr
             FOR ALL ENTRIES IN lt_temp
             WHERE /bic/zprclwynr = lt_temp-temp
             AND   objvers = 'A'.
    ENDIF.
Thanks and Regards,
Faisal

Not only is it BW, it is also a customer table. Have a look here on how to research yourself:
Please Read before Posting in the Performance and Tuning Forum
Thomas

VBFA Time out dump

Hi Experts,
We encountered several TIME_OUT dumps due to a select statement in VBFA. All those programs with VBFA select statements are working fine for 2 years already. Recently another index has been created named ZVB03 using the fields MANDT, VBELN, VBELV and VBTYP_V. Aside from the newly created index, an index ZVB01 (VBELN and VBTYP_N) and ZVB02 (VBELN and VBTYP_V) is already in the system.
The ZVB03 index was already in production system last June 9 and did not cause any problems until August 17. An Oracle Patch was applied the weekend before (August 15 if Iu2019m not mistaken) and after this, all sorts of performance issues came out. The patch may have also caused this problem but this weu2019re not exactly sure of.
Are there any possible causes that this patch impact the table VBFA indexes?
Thanks for your response.
Best Regards,
Kurrt

Hello Kurtt,
> The database patch made is to 10G from 9i.
Good, then you have upgraded your database, which is a much bigger thing than only installing one patch.
Upgrading from 9i to 10g is a mayor thing and there are several "post upgrade" steps that must be done. If those steps are missing the probability of situations like the one you mention are "bigger"
Please, check the "new" upgrade guide and bew sure that you have followed ALL steps mentioned there. At the beginning of this forum you find a post "stcik" mentioned where to find the new upgrade uides.
Specially pay attention to:
1) installing a correct patch set (are you in 10.2.0.2 or 10.2.0.4?)
2) installing ALL required patches, specially the optimizer merge fix. Check the following notes:
1137346 Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4
1165319 Optimizer merge fix for Oracle 10.2.0.4
871096 Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.2
981875 Optimizer merge fix for Oracle 10.2.0.2
3) set properly the parameters. You can use the script from note 1171650 already mentioned. The notre with the SAP parameter recommendation is 830576
4) calculate statistics for the oracle data dictionary, fixed tables and system statistics
5) calculate statisitcs for the complete schema.
if the previous steps are not done, not proper analysis can be done.
Note, I'm not saying that those steps will solve the issue (but I have seen lot os performance issues after upgrading to 10g desappearing after they have been properly done) but that no good analysis can be done if one or some are "missing"
If you still have the problem afterwards, it could be ideal that you execute the scrip from SAP note 1257075 (SQL_ID Data Collector (Oracle 10.2.0.2 or higher)) and collect the output.
Please, do not paste the output in a post, because it would be tooooo big, and the format would be "crap" and imposible to read. I think you can attach a file somewhere in the SDN, or may be uploaded to "rapidshare" or any similar place where you can put a txt file.
Edited for format by: Fidel Vales on Sep 25, 2009 10:02 AM

Time out exception

Hi, I have to modify a report because it takes a lot of time to get some records in a select sentence, and finally i always get a time out dump. I think i should use function SAPGUI_PROGRESS_INDICATOR when the program arrives to that select but i don't know hopw to use it...
this is part of the code i have..
SELECT aufnr
         werks
         budat ltxa1 rueck rmzhl ismnw ismne aufnr
         learr pernr
FROM afru
INTO TABLE it_afru FOR ALL ENTRIES IN it_csla
WHERE learr = it_csla-lstar AND
        stokz <> gc_marca AND
        budat IN s_budat AND
        stzhl = gc_stzhl_cero AND
        pernr IN s_pernr.
at this point, the program doesn't go on, so i tried the following but don't know if it's ok or not...
data: lw_lineas type i.
DESCRIBE TABLE it_csla LINES lw_lineas.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      percentage = lw_lineas
      text       = 'Tratando datos AFRU'.
SELECT aufnr
         werks
         budat ltxa1 rueck rmzhl ismnw ismne aufnr
         learr pernr
FROM afru
INTO TABLE it_afru FOR ALL ENTRIES IN it_csla
WHERE learr = it_csla-lstar AND
        stokz <> gc_marca AND
        budat IN s_budat AND
        stzhl = gc_stzhl_cero AND
        pernr IN s_pernr.
thanks in advance !!!

try the following change..
SELECT aufnr
werks
budat ltxa1 rueck rmzhl ismnw ismne aufnr
learr pernr
FROM afru
INTO TABLE it_afru FOR ALL ENTRIES IN it_csla
WHERE learr = it_csla-lstar AND
budat IN s_budat AND
stzhl = gc_stzhl_cero.
delete it_afru where stokz ne gc_marca.
delete it_afru where not pernr in s_pernr.
~Suresh

Time out error while executing BW query from SRST

Hello Experts,
While running a query from SRST t-code im getting time out dump.
Is there any possibility to run the query in background to avoid dumps, apart from taking the report and executing from SE 38
Regards,
Arjun Reddy.

Hi,
Your target may have huge and report may be trying to extract whole data.
please try to your report with some selections/filters and check it.
it may work.
Thanks

Bid Evaluation Time Out

Hi Experts,
We have installed the basic SRM system on Classic Mode. The Bidding Functionality is working fine with Bid Invitation getting published and Bid responce getting created and can be accepted properly.
Issue is only when we click on the "Bid Com[parison" button, or go Bid Evaluation under analyses tab the system gives time out dump after a long wait.
Rest all functions within Bidding Engine are absolutely smooth and timeout timing in ICM is also increased at a very high value.
Can anyone suggest the diagonosis for this issue.
Regards
Hussain

Hi Dinesh,
The Notes were heplful to give some insight. Though it has not solved the problem.
As per note Note 846797 we have maintained the parameter value at ztta/diag_area and
As per note Note 889279 the changes were already present as per the patch level.
The issue still remains the same. Can you or anyone please suggest anything else.
Regards
Hussain

Dialog process time out !!!

Hi experts,
I am trying to execute a function Module(with RFC) that triggers a dialog process. Now the system time out limit for a dialog process is 10 mins and my process is taking longer than that, hence its giving a "Time Out" dump. Is there a way to that can avoid this system time limit for a dialog process?
Please suggest!!!
Thanks.
Note : I tried running in background but didn't work.

>
ankit harjai wrote:
> Note : I tried running in background but didn't work.
Hello Ankit,
Can you elaborate what do you mean by "running in background"? Did you use IN BACKGROUND TASK / IN BACKGROUND UNIT
addition while calling the RFC?
BR,
Suhas

Time out on Infoset

Hi,
Iam trying to display data of infoset; but it throws a dump saying 'Time out'.
Iam not sure why this is happening.
This infoset is using 8 DSOs and 1 master data table, having many left outer joins and equal joins.
Also one DSO is added twice so as to have a equal join to itself.
Does the infoset seems feasible? if it is why do we get time out dump.
Points will be assigned for all your views
Thanks
AP

Endless loop when displaying data flow BI 7.0 (SP 13)
SAP Note Number: 1035471
Symptom
If you use the 'Display Data Flow' context menu entry to display the data flow for an object in the Data Warehousing Workbench an endless loop occurs. This results in short dump TIME_OUT after a short period of time.
Other terms
Data Warehousing Workbench, DW Workbanch, data flow
"CL_AWB_OBJECT_NET_SAPGUI======CP"
CL_AWB_OBJECT_NET_SAPGUI======CP, SET_NODE_LEVELS,
CL_AWB_OBJECT_NET_SAPGUI======CM,
ISMP, TIMEOUT
Reason and Prerequisites
This problem is caused by a program error.
The data flow contains a transformation that is connected to an InfoSet or an emulated 3.x DataSource.
Solution
SAP NetWeaver 2004s BI
           Import Support Package 13 for SAP NetWeaver 2004s BI (BI Patch 13 or SAPKW70013) into your BI system. The Support Package is available once Note 991093 "SAPBINews BI 7.0 Support Package 13", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions as an advance correction.
You must first read Note 875986, which provides information about transaction SNOTE.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
Before you implement an advance correction (if one exists and you want to implement it), see Note 875986. This composite SAP Note contains all corrections that refer to the SAP Note Assistant and prevent problems during the implementation. You must call transaction SNOTE again after you have implemented the composite SAP Note.
Header Data
Release Status Released for Customer
Released on 29.03.2007
Priority Correction with medium priority
Category Program error
Primary Component BW-WHM-AWB Administrator-/Data Warehousing Workbench
Release
Soft. Component Release Track From Release To Release And Successors
SAP_BW   70   700   700
SAP_BW   710   710   710
SAP_BW_VIRTUAL_COMP   70 710   700   700
Correction Instructions
Correction Instruction Valid from Valid to Installation Soft. Component ID
Ref. Correction Modification Status Last Changed on
0000878783 700 700 0120061532 SAP_BW_VIRTUAL_COMP 654
BR9K049585   Released 08.03.2007   17:36:07
Support Packages
Add to Basket Software Component Release Package Name Download
SAP_BW 700 SAPKW70013
SAP_BW 710 SAPKW71002
SAP_BW_VIRTUAL_COMP 700 SAPK-70014INVCBWTECH

Caller 70 is missing time out (short dump)

when I was trying to load transaction data into cube , it was failed
the error message was :
short dump : caller 70 is missing
I checked in st22 , it shows that <b>time out</b> .
when check in r/3 side , extraction was over and job was finished.
data is coming upto PSA & is not updating into data target and geting failed after some time.
can any one give me suggestion.
thanks in advance
Ram

Hi Ram.
We were getting the same message. SAP recently published note 631668. It suggests dropping the InfoCube indexes before the load and then rebuilding them afterwards.
I set our system up to do that last night. We didn't get the error last night, but a single set of loads is not enough to make me say that it works. But it might be worth trying in your case.
Regards,
Adam

Dump time out message in the portal

Hi experts ,
In my portal , the web dynpro component "FPM_OIF_COMPONENT" is being used.
when user logs in and then sit idle for 30 min. then after he press "save" button,
he gets the dump message like
"the URL http://...WebDynpro /sap/hap_main_document was not called due to an error
User session (HTTP/SMTP /..) closed after time out."
"the termination type was "ERROR_MESAGE_STATE"
but the Service "WebDynpro /sap/hap_main_document" remains active.
Timeout is set for 60 mins but it gets timeout after 30 mins.
I have to show a normal alert message instead of the dump mesage. how can i achieve that..
please help.

Hi Tobias ,
yes , !! time out for web dynpro is also set to 60 min .
But as per the requirment , i have to show a page / pop up msg displaying "portal time out " instead of that dump mesage.
in the meanwhile i have come across the t-code SICF , on executing it for services. then in the path
"sap -> bc -> webdynpro -> namspace SAP - > HAP_MAIN_DUCUMENT " i have found the setting to redirecting the user to a URL page when error occurs.for every type of error there is a option of "redirect to a URL".
I have not tested it.But i think it might work.i am still working on it.
your valuable feedback is welcome..
thanks
Nishchay

SXMB_MONI not Responding - Time Out

Hi All,
I am unable to see the processed XML messaged using the tcode SXMB_MONI.
When I enter the selection criteria of the messages and execute it the GUI doesn't respond for sometime and finally throws a time out exception.
Can somebody help me to solve this issue?
Any configurations do we need to do when the tcode deosn't respond?
Helpful Answers will be rewarded points.
Thanks & Regards,
Zabiulla

Hi,
can you check if your database performs well?
what database system do you have ?
for oracle, check with Note 1020260 - Delivering Oracle statistics
for sqlserver, Note 1124574 - Performance improvement for 'SQL Server' in trans SXMB_MONI
cheers,
Aaron

SXMB_MONI time out - dump

Similar Messages

Maybe you are looking for