Sync abap outbound proxy steps

Hi friends,
Could you please help me to send the sync abap outbound proxy creation blogs.
advanced thanks
Rao

hi
check this
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
rgds
Arun

Similar Messages

  • ABAP Outbound Proxy: some messages stuck in CRM system

    Hi all,
    we've a strange issue with a ABAP Outbound proxy we've generated in our CRM 5.0 system (asynchronous interface).
    Sometimes messages stuck in the CRM system. They are in status 'Scheduled' (green flag) in SXMB_MONI in the CRM system. When I have a look at the corresponding queue, there's no message within. Status in SMQ1 and SMQ2 is fine, too. All queues are registered. When I reprocess such a message manually in SXMB_MONI in CRM with the restart button, they're sent fine to XI.
    Please note: it's NOT a general issue with that outbound proxy. In most cases the messages are sent immediately, just in some cases the messages stuck and I don't know why.
    Is it possible to restart such messages automatically? I just know the report RSXMB_RESTART_MESSAGES, but that one just restarts messages in Error status. But the ones we have aren't in error status so they cannot be selected with that report.
    Any idea where could be the problem / we should check?
    BR
    Holger

    On which SP r u working correctly. May be an SP upgrade could help.
    Regards,
    Prateek

  • Sync ABAP Server Proxy - Attachment in Response possible ?

    Hi I need to send an attachment in a synchronous ABAP Server Proxy.
    I proceeded as follows:
    1. design sync inbound interface in PI
    2. generate abap server proxy
    3. implement this abap proxy
    4. tried to attach file to response like this:
        data server_context type ref to if_ws_server_context.
        data attachment_prot type ref to if_wsprotocol_attachments.
        data attachment          type ref to if_ai_attachment.
        data attachments         type prx_attach.
        data lo_protocol         type ref to if_wsprotocol.
        data lo_payload_protocol type ref to if_wsprotocol_payload.
        try.
            server_context = cl_proxy_access=>get_server_context(
            attachment_prot ?= server_context->get_protocol( if_wsprotocol=>attachments ).
            attachment = attachment_prot->get_attachment_from_binary(
                data       = lv_xdata
                type       = if_ai_attachment=>c_mimetype_pdf
                name       = 'my attachment'
            append attachment to attachments.
            attachment_prot->set_attachments( attachments ).
          catch cx_ai_system_fault .
            output-mt_get_documents_resp-fault-fault_text = 'cx_ai_system_fault'.
            output-mt_get_documents_resp-fault-fault_url = 'ERR001'.
        endtry.
    However I cannot see any attachment in the response.
    Q1: is it possible at all to create attachments in sync server abap proxy?
    Q2: if it is, what is wrong with my coding?
    cheers
    simon:)

    Veronica,
        Unfortunately, this was not possible, due to the system EHP state.
    First after upgrade this functionality will be possible ( ECC 6.0 EHP5 - corresponding to NW AS EHP2 )
    For an example, as Stefan pointed out, you might want to open OSS if your system is up-to-date and you need one.
    best regards
    Simon:)

  • ABAP Outbound Proxy Error

    Hi Everyone,
    In PI ESR, I have update the data enhancement structure with new field and I have mistakenly activated standard service Interface which is refering to ehancement structure.
    Now in the ABAP side in SPROXY transaction, Interface is showing red. Since its standard proxy I am unable to regenerate the proxy.
    Please let me know your suggession.
    Regards,
    Sudheer

    Hi,
    Error is related to the connection set up done between ECC and PI.
    Test the connection using sldcheck.
    HTH
    Rajesh

  • ABAP Outbound Proxy with multiple entries

    I have message type as follows.
    MT_Proxy_Matmas_out  -- DT_Proxy_Matmas_out
    Matnr         1..unbounded
       Material_Num   1..1
       Material_Dec    1..1
    Message Inrerface: MI_proxy_Matmas_out.
    Generated Proxy has following objects.
    1. Class     ZMCO_MI_PROXY_MATMAS_OUT     Proxy Class (generated)
    2. Structure     ZMDT_PROXY_MATMAS_OUT     Proxy Structure (generated)
    3. Structure     ZMDT_PROXY_MATMAS_OUT_MATNR     Proxy Structure (generated)
    4. Structure     ZMMT_PROXY_MATMAS_OUT     Proxy Structure (generated)
    5. Table Type     ZMDT_PROXY_MATMAS_OUT_MATN_TAB     Proxy Table Type (generated)
    Report Program ZB_Matnr_xport.
    DATA: prxy TYPE REF TO ZMCO_MI_PROXY_MATMAS_OUT.
    DATA: i_data_records TYPE TABLE OF ZMDT_PROXY_MATMAS_OUT.
    DATA: wa_data_records TYPE ZMDT_PROXY_MATMAS_OUT.
    DATA: it type ZMMT_PROXY_MATMAS_OUT.
    CREATE OBJECT prxy.
    Loop at itab
    MOVE_Corresponding ......to XXXXXXXXXXXXXX // we tried several option with no success here in this Loop  //
    EndLoop
    CALL METHOD prxy->execute_asynchronous
          EXPORTING
            output = it.
         commit work
      CATCH cx_ai_system_fault .
        DATA fault TYPE REF TO cx_ai_system_fault .
        CREATE OBJECT fault.
        WRITE :/ fault->errortext.
    As you can see from above template I want move all the records of Internal table to Message Type structure before calling Proxy, CALL METHOD proxy->.........
    Can someone provide me sample code how to achive this. We are on WEB AS 620.
    Thanks a lot.
    ST

    suppose your table is it_datatable  of type  ZMDT_PROXY_MATMAS_OUT_MATN_TAB which contains matnr, description.  Then try the following
    data : l_var type ZMMT_PROXY_MATMAS_OUT.
    l_var-MT_Proxy_Matmas_out-Matnr 1[ ] = it_datatable[ ].
    then
    CALL METHOD prxy->execute_asynchronous
    EXPORTING
    output = l_var.
    commit work

  • HI experts please explain abap client proxy

    1) please explain abap client proxy step by step.how it is working

    Hi
    -->ABAP proxy are the proxy which we create in R/3 system
    -->If we create the proxy on Outbound Message interface in R/3 system then it is ABAP Client proxy.
    -->If we create the proxy on Inbound Message interface in R/3 system then it is ABAP Server proxy.
    Thanks

  • Sync Async using proxies ( Calling Outbound proxy from Inbound proxy )

    I'm trying to generate Asynchronous Outbound message from the Synchronous Inbound message message  due to a requirement. My question is : is it really possible to develop such a scenario?. I'm getting weird error such as Kernal exception etc. Please let me know if you have developed such scenario and what should we do dfifferently in such scenarios?. Thank you for any suggestions.

    Hi,
    This error has has nothing to do with Calling Outbound Proxy from from Inbound Proxy. The scenario which you are telling is very much possible.
    It looks like there is some problem in your proxy code while calling RFC from within there or something like that. Try catching the exception and see what is the exact error or put in debug mode and see the step where exactly your code is failing.
    Use the following links for Catching Exception in Proxy
    Inbound ABAP Proxy Trace and error handling
    Handling Exceptions
    ABAP Server Proxies - Fault Handling
    Exception handling in integration processes
    ABAP Proxy and fault messages
    /people/bhanu.thirumala/blog/2006/02/07/abap-proxy--xml-to-abap-transformation
    Thanks
    Amit
    Reward point if answer is helpful

  • Sender ABAP Synchronous proxy -- PI -- JDBC sync scenario pls!!

    Hi Guys,
    Can any one help to find one sample scenario like ABAP Proxy --> PI --> JDBC Sync call ? Sync ABAP proxy sample code any 2 or more filelds going from ABAP proxy and maps on JDBC sync request, up date target side SQL server database tables, in case if any error happens error/success message must go back to SAP one Z table with response.
    Any help would be really great!!
    Many thanks in advance
    San

    up date target side SQL server database tables, in case if any error happens error/success message must go back to SAP
    one Z table with response.
    When you do an update you can get back the number of rows updated in the JDBC response....you can find this in the help page showing JDBC structure. If you are looking for any other response then probably the message needs to be genarated by PI itself after checking the response from JDBC.
    Regards,
    Abhishek.

  • Message has Error status on outbound side - in ABAP inbound proxy !!

    Hi All,
    One interesting question for you guys. I have got one of the scenarios like File to ABAP inbound proxy. Message are going properly, no errors in receiving system. But on PI moni I can able in "outbound status" column in red colored flag. No all the messages couple of them with u201CMessage has Error status on outbound side ". Why please?
    Regards
    San

    Hi ,
    Please check whether the  correct data  is coming from sender side .  and check the j2ee engine runtime parameters.
    Cheers,
    Meera
    Edited by: MeeravaliDudekula on Oct 18, 2010 2:36 PM

  • Outbound ABAP Client Proxy

    Hi,
    Scenario - Client Proxy to JDBC.
    I am getting Purchase order details out of Client proxy which goes and updates multiple tables at JDBC. I am doing this via single service interface to update multiple tables ( multiple statement element in JDBC target structure ).
    Client Proxy
    PO HEADER
    PO DETAIL
    PO TEXT
    PO ITEM
    JDBC tables
    tbl_HEADER
    tbl_DETAIL
    tbl_TEXT
    tbl_ITEM
    Detail and ITEM tables from SAP has too many entries. When I tested in development for 14 PO header it had 1500 detaills, 500 text and 800 items.  So i am thinking of breaking down of these PO headers in abap client proxy to trigger the abap proxy for every 50 PO header. So that it would not end up with huge PO details and text.
    I am thinking of modifyin the abap code to send 50 PO header each time in client proxy.
    loop on PO headers.
    if lv_counter is 50.
    call method to send via client proxy.
    then next 50 records. so that we are sending in chunks. 
    PI would receive in multiple messages with consisting of 50 PO header and many item details. Does update/insert on JDBC table would affect. what precautions shd i take in PI considering update on JDBC
    Kindly suggest with any inputs. 
    Thanks in advance.

    Hi,
          You can use the update_insert option of the receiver jdbc canonical structure.
    This would ensure that rows already existing would be updated and only the delta would be inserted into the tables.
    Regards

  • ABAP server proxy help required

    Hello,
    I want to make two simple ABAP server proxy scenarios
    1. File to ABAP server proxy (async scenario)
    2. File to ABAP server proxy (sync scenario)
    Pls send me the blogs/docs for the above scenarios.
    Regards

    Henry,
    Please go through the below links.
    <b>File to R/3 via ABAP Proxy with good example</b>
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    <b>Synchronous Proxies:</b>
    <b>Outbound Synchronous Proxy</b>
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
    <b>Inbound Synchronous Proxy</b>
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
    Also go through this, if you have problems in your proxy connection.
    <b>How to Activate Proxy.</b>
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    Regards,
    Sarvesh

  • Facing problem with SOAMANAGER while working on ABAP Client Proxy

    Dear Community Friends & Experts,
                 I am facing a problem with the SOAMANAGER, I think so. Let me explain you a scenario what I am into:
    The scenario is like I need to Push data from BI table to SAP PI. We decided to go using ABAP client proxy as Sender and then will
    receive it using FTP adapter to FTP address.
    I have created Integration repository design object Data types, Message types, interfaces and mapping. Now I am into SAP BI and running SPROXY and generated proxy for my outbound interface. fine.
    Till now its okay.Now I wanna my generated proxy to be available within the SOAMANAGER T-code I am not able to find my proxy in the list.
    Can anybody send me detailed steps for outbound proxy to SOAMANAGER for creating local port for proxy. I wanna use proxy with WS adapter.
    Second Query:
    I need to using RSPC in SAP BI to trigger the proxy what code to write with SAP PI 7.0 version.
    Can anybody bring some light to this problem...
    <h5>Regards,
    Gaurav Patwari </h5>

    Dear Experts,
    Problem solved, cannot say solved but yes its not required now as I am having Client Proxy call so it will be a native call to XI and which does not need SOAMANAGER things.
    Thank you all for taking your time and writing answers.
    Regards,
    [Gaurav Patwari|http://gauravpatwari.wordpress.com]
    Edited by: GauravPa on Apr 17, 2010 11:32 AM

  • ABAP Client Proxy to File (File is not getting generated)

    Hi All,
    I'm trying out a scenario ABAP proxy --> XI  --> FILE.
    I have followed the given blog to create ABAP client proxy.
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    While executing the ABAP client proxy, the values are properly sent to XI and in the SXMB_MONI the message shows as successful. But the correspoding file is not created.
    It seems everything is fine in the receiver adpater(Monitoring) and in the SXMB_MONI also the msg shows successful(receiver side).
    The directory path and the corresping file creation parameters also looks fine.
    Couldn't figure out what went wrong. Please help me on this.
    Thanks,
    Ajay.

    Hi Smitha,
        Please find below the Call Adapter trace
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">Party normalization: sender</Trace>
      <Trace level="1" type="T">Sender scheme external =</Trace>
      <Trace level="1" type="T">Sender agency external =</Trace>
      <Trace level="1" type="T">Sender party external =</Trace>
      <Trace level="1" type="T">Sender party normalized =</Trace>
      <Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
      <Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.0</Trace>
      <Trace level="2" type="T">Host = iscsapapp4w:8010</Trace>
      <Trace level="2" type="T">Server protocol = HTTP/1.0</Trace>
      <Trace level="2" type="T">Remote address = 10.191.117.166</Trace>
      <Trace level="1" type="T">COMMIT is done by XMB !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
      <Trace level="3" type="T">Getting type of XMB...</Trace>
      <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
      <Trace level="2" type="T">XMB kind = CENTRAL</Trace>
      <Trace level="3" type="T">Start pipeline found</Trace>
      <Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
      <Trace level="3" type="T">No triggers found. OK.</Trace>
      </Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="3" type="T">system-ID = NW2</Trace>
      <Trace level="3" type="T">client = 100</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = XIAPPLUSER</Trace>
      <Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
      <Trace level="1" type="T">PLNAME = CENTRAL</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">QOS = EO</Trace>
      <Trace level="3" type="T">Message-GUID = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
      <Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = CENTRAL</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
      <Trace level="3" type="T">Generate prefixed queue name</Trace>
      <Trace level="1" type="T">Queue name : XBTI0000</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBTI0000</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="3" type="T">Setup qRFC Scheduler</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="3" type="T">Call qRFC .... MsgGuid = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
      <Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
      <Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
      <Trace level="3" type="T">OK.</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="3" type="T">Version number = 000</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 001</Trace>
      <Trace level="3" type="T">Message version 000</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
      <Trace level="3" type="T">Trace object available again now. OK.</Trace>
      <Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
      <Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
      <Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
      <Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
      </Trace>
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
      <Trace level="2" type="T">Increment log sequence to 001</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="3" type="T">system-ID = NW2</Trace>
      <Trace level="3" type="T">client = 100</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = XIAPPLUSER</Trace>
      <Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = CENTRAL</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline attributes</Trace>
      <Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
      <Trace level="3" type="T">ENABLE = 1</Trace>
      <Trace level="3" type="T">TRACELEVEL = 0</Trace>
      <Trace level="3" type="T">EXEMODE = A</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline elements</Trace>
      <Trace level="3" type="T">ELEMPOS = 0001</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0002</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0003</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0004</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0007</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0008</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0009</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
    - <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
      <Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">Start without given receiver</Trace>
      <Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
      <Trace level="2" type="T">...valid Receiver w/o Condition: - ACN_LEGACY2_04_BS</Trace>
      <Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
      <Trace level="2" type="T">Number of Receivers:1</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 001</Trace>
      <Trace level="3" type="T">Message version 001</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
    - <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
      <Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) ACN_LEGACY2_04_BS MI_Client_Proxy_Inbound</Trace>
      <Trace level="2" type="T">...valid InbIf without Condition: MI_Client_Proxy_Inbound</Trace>
      <Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 002</Trace>
      <Trace level="3" type="T">Message version 002</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
    - <!--  ************************************
      -->
      <Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
      <Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="2" type="T">got property produced by receiver determination</Trace>
      <Trace level="1" type="T">number of receivers: 1</Trace>
      <Trace level="1" type="T">Single-receiver split case</Trace>
      <Trace level="1" type="T">Post-split internal queue name = XBTOM2__0001</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Persisting single message for post-split handling</Trace>
      <Trace level="1" type="T" />
      <Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 012</Trace>
      <Trace level="3" type="T">Message version 003</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
      <Trace level="3" type="T">Trace object available again now. OK.</Trace>
      <Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
      <Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
      <Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
      <Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
      </Trace>
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
      <Trace level="2" type="T">Increment log sequence to 005</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="3" type="T">system-ID = NW2</Trace>
      <Trace level="3" type="T">client = 100</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = XIAPPLUSER</Trace>
      <Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = CENTRAL</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline attributes</Trace>
      <Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
      <Trace level="3" type="T">ENABLE = 1</Trace>
      <Trace level="3" type="T">TRACELEVEL = 0</Trace>
      <Trace level="3" type="T">EXEMODE = A</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline elements</Trace>
      <Trace level="3" type="T">ELEMPOS = 0001</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0002</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0003</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0004</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0007</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0008</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0009</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
      <Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
    - <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
      <Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
      <Trace level="2" type="T">......attachment XI_Context not found</Trace>
      <Trace level="3" type="T">Mapping is already determined in the interface determination</Trace>
      <Trace level="3" type="T">Object ID of Interface Mapping 791955998E03380CA938A0130A348AFB</Trace>
      <Trace level="3" type="T">Version ID of Interface Mapping 3475AE80930811DAA18DC14C0ABF75A6</Trace>
      <Trace level="1" type="T">Interface Mapping http://accenture.com/xi101/ABAPclientProxy IM_Valuemapping</Trace>
      <Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_Valuemapping_</Trace>
      <Trace level="3" type="T">Dynamic configuration is empty</Trace>
      <Trace level="2" type="T">Mode 0</Trace>
      <Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_Valuemapping_.</Trace>
      <Trace level="3" type="T">Load 3475ae80-9308-11da-a18d-c14c0abf75a6, http://accenture.com/xi101/ABAPclientProxy, -1, com/sap/xi/tf/_MM_Valuemapping_.class.</Trace>
      <Trace level="3" type="T">Search com/sap/xi/tf/_MM_Valuemapping_.class (http://accenture.com/xi101/ABAPclientProxy, -1) in swcv 3475ae80-9308-11da-a18d-c14c0abf75a6.</Trace>
      <Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_Valuemapping_</Trace>
      <Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_Valuemapping_</Trace>
      <Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_Valuemapping_ completed. (executeStep() of com.sap.xi.tf._MM_Valuemapping_</Trace>
      <Trace level="3" type="T">Dynamic configuration is empty</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 005</Trace>
      <Trace level="3" type="T">Message version 005</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
    - <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
      <Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
      <Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
      <Trace level="2" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
      <Trace level="2" type="T">-ACN_Sender_BS_XI</Trace>
      <Trace level="2" type="T">-ACN_LEGACY2_04_BS</Trace>
      <Trace level="2" type="T">http://accenture.com/xi101/ABAPclientProxy.MI_Client_Proxy_Inbound</Trace>
      <Trace level="2" type="T">Channel found: - ACN_LEGACY2_04_BS - ValueMap_Repl_Receiver1</Trace>
      <Trace level="2" type="T">no header mapping defined</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 006</Trace>
      <Trace level="3" type="T">Message version 006</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
    - <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
      <Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
      <Trace level="3" type="T">ADRESSMOD = SD</Trace>
      <Trace level="3" type="T">P_CLASS =</Trace>
      <Trace level="3" type="T">P_IFNAME =</Trace>
      <Trace level="3" type="T">P_METHOD =</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Unknown channel type: File</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
      <Trace level="3" type="T">ADRESSMOD = SD</Trace>
      <Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
      <Trace level="3" type="T">Channel for adapter engine: File</Trace>
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
      <Trace level="2" type="T">return fresh values from cache</Trace>
      <Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET): af.nw2.iscsapapp4w</Trace>
      <Trace level="3" type="T">URL = http://iscsapapp4w.idcsap.com:51000/MessagingSystem/receive/AFW/XI</Trace>
      <Trace level="3" type="T">User = XIISUSER</Trace>
      <Trace level="3" type="T">Cached = X</Trace>
      <Trace level="3" type="T">Creating HTTP-client</Trace>
      <Trace level="3" type="T">HTTP-client: creation finished</Trace>
      <Trace level="3" type="T">Security: Basic authentication</Trace>
      <Trace level="3" type="T">Serializing message object...</Trace>
      <Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
      <Trace level="3" type="T">HTTP-client: request sent</Trace>
      <Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
      <Trace level="3" type="T">HTTP-client: response received</Trace>
      <Trace level="3" type="T">HTTP-client: checking status code...</Trace>
      <Trace level="3" type="T">HTTP-client: status code = 200</Trace>
      <Trace level="3" type="T">Deserializing message object...</Trace>
      <Trace level="3" type="T">HTTP-client: closing...</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2006-04-03T10:24:19Z CET End of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 007</Trace>
      <Trace level="3" type="T">Message version 007</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </SAP:Trace>
    Thanks,
    Jothivel.

  • ABAP Consumer Proxy. Not working?

    Hello
    I've created consumer proxy in ABAP. Configured logical port in SOAMANAGER. When I test call operation from this proxy I get "Call successful - Empty result" because it is async interface. But it seems that PI (which serves this service) doesn't get anything from ABAP program. How can I monitor or check the log of whar this proxy sends?
    best regards
    Maciej

    Hi guys,
    I'am still facing the same problem. Queues in PI are registered, the async outbound proxy call gives the same message "Call successful - Empty result". But no messages are shown in SXMB_MONI. I've followed the link above. Other messages from sync scenarios are shown. Services (EO, EOIO) are registered and activated.
    In Adapter Monitoring no messages are shown. I am using XI adapter as sender and JMS sender as receiver.
    I've stopped JMS-sendin-Queue and there is no message too.
    My issue was resolved by COMMIT WORK of proxy-call.
    Thanks in Advance,
    Stefan
    Edited by: Stefan Burghardt on Jul 12, 2011 6:32 PM

  • PI ( old version called XI ) connectivity with ABAP via Proxy

    Hi
    Could any body please share with me the sample code for
    connectivity  of  PI ( old version called XI )  and ABAP  via Proxy for Outbound interface.
    points will be rewarded for sure
    Thanks & Regards
    Meeta

    The prerequisites to configure ABAP Proxy include: (landscape dependent) 
    The business systems should be based on SAP Web AS 6.20 and SAP Web AS 6.20 kernel patch level above 1253
    You have installed the XI Add-On in each of these business systems as described in the Installation Guide SAP Exchange Infrastructure 3.0
    The business systems and your central Integration Server are maintained in the System Landscape Directory (SLD).
    Configuration required on the Business System:
    1.       Create a HTTP connection in the business system using transaction SM59
    Technical Setting:
    ·         Connection Type: H
    ·         Target Host: System name
    ·         Service Number: HTTP Port name
    ·         Path Prefix: /sap/XI/engine/?type=entry
    Logon Security
    On the Logon/Security tab page, enter the following logon data:
    ·         User: XIAPPLUSER (for example); this user should represent the sending business system (see also the SAP XI Security Guide under Service Users for Message Exchange).
    ·         Password: the password you have specified for this user
    ·         Client: SAP XI Integration server
    ·         Language: Language required 
    2.       Configuration Business system as local Integration Engine.
    1.       Go to Transaction SXMB_ADM
    2.       Choose Edit --> Change Global Configuration Data.
    3.       Select Role of Business System: Application system
    4.       Corresponding Integration server: dest:// XI_XIR_CONNECTION created in step 1. Dest://XI_XIR_CONNECTION.
    5.       Under Specific Configuration Data you can specify additional configuration data
    Select the relevant category under Specific Configuration Data.
    Choose Change Specific Configuration Data.
    For ABAP Proxies, Add the following configuration:
    1.Category RUNTIME
    2.Parameters: IS_URL
    3.Current Value: dest://XI_XIR_CONNECTION

Maybe you are looking for