Sync RFC call from BPM - message expired

Hi guys,
I have a scenario with BPM where I'm doing a sync RFC call to ECC and then I want to process the result. However, the processing of BAPI take approx 5 minutes and my messages get expired after 3 minutes.
How to resolve this issue?
Thanks a lot,
Olian

Hello,
Problem might be at BAPI end. Please check BAPI by executing with your set of inputs. If BAPI goes for exception for yoru set of input values.. you may not get response from R3. So you might have error..
secondly.. Please post the error in the communication channel and errro in the SXMB_Moni as well.
Thanks,
subbu

Similar Messages

Sync RFC call from XI

Hi
I've a requirement for a XI Inbound Order that I need to check for each MATNR on the Order Line it's associated Division (SPART). Once I know the Division I'll then split up the Order per Division.
Can I from my BPM collect the message, call a RFC via Send Sync Step to return the Divisions and then continue with my transformation ?
I was looking for an example of how to call an RFC from a BPM. NOT using Sync<>Async bridge.
Does anybody have a link to a blog etc for that.?

Hi,
You can either use RFC lookup in mapping or use Sync RFC call in the BPM.
Refer the Blog RFC Scenario using BPM --Starter Kit By Arpith Seth for Sync RFC call in BPM.
Refer this document [Mapping Lookups: Remote Function Calls API|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439] for making RFC lokup from mapping.
Thanks
SaNv...

RFC call From BPM

Hi,
I have a scenario where I need to access a Function Module from BPM for certain business validations. My FM is in XI and I need to invoke that FM from BPM. How can we do that ? I am trying an RFC call but it gives me an error "No identifier defined for the system".
Pl advise, where am I wrong OR if there is a better way to do that.
Thanks,
Sid

This doesn't look like an issue for BPM. Please check whether the connection is working fine by testing a call to the RFC in a simple scenario(file to RFC or whatever).
In BPM all you need to do is a synchronous send step with abstract message type defined for both request and response structures of the FM . And in ID a receiver determination+channel and all for this step.
Best of luck...

Error while calling ejb service call from BPM service

Hi,
We are using the Oracle 11.1.1.5.0
We are calling ejb service call from BPM service to update the data to Oracle database.
We are getting the below error when we executing the ejb service call from BPM Service.
<Error> <EJB> <BEA-010026> <Exception occurred du
ring commit of transaction Name=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliver
yBean.handleCallback(java.lang.String,java.lang.String,java.lang.String,int,bool
ean)],Xid=BEA1-45B91984D57960994897(30845116),Status=Rolled back. [Reason=javax.
transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a p
articipant in two-phase commit. To force this participation, set the GlobalTrans
actionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhas
eCommit for the Data Source = EBSConnection],numRepliesOwedMe=0,numRepliesOwedOt
hers=0,seconds since begin=1,seconds left=60,XAServerResourceInfo[SOADataSource_
base_domain]=(ServerResourceInfo[SOADataSource_base_domain]=(state=rolledback,as
signed=soa_server1),xar=SOADataSource,re-Registered = false),XAServerResourceInf
o[ArCnTaskForms@EBSConnection@EBSConnection_base_domain]=(ServerResourceInfo[ArC
nTaskForms@EBSConnection@EBSConnection_base_domain]=(state=rolledback,assigned=s
oa_server1),xar=weblogic.jdbc.wrapper.JTSEmulateXAResourceImpl@fa5476,re-Registe
red = false),SCInfo[base_domain+soa_server1]=(state=rolledback),properties=({web
logic.jdbc.remote.EBSConnection=t3://192.168.10.114:8001, weblogic.transaction.n
ame=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean.handleCallback(java.la
ng.String,java.lang.String,java.lang.String,int,boolean)]}),local properties=({w
eblogic.jdbc.jta.SOADataSource=[ No XAConnection is attached to this TxInfo ]}),
OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=soa
server1+192.168.10.114:8001+basedomain+t3+, XAResources={eis/tibjms/Queue, eis
/activemq/Queue, WLStore_base_domain_BPMJMSFileStore, WLStore_base_domain__WLS_s
oa_server1, eis/fioranomq/Topic, eis/jbossmq/Queue, eis/Apps/Apps, eis/websphere
mq/Queue, eis/AQ/aqSample, WLStore_base_domain_SOAJMSFileStore, eis/aqjms/Queue,
WSATGatewayRM_soa_server1_base_domain, eis/sunmq/Queue, eis/pramati/Queue, SSCo
nnectionDS_base_domain, eis/tibjms/Topic, eis/tibjmsDirect/Queue, eis/wls/Queue,
eis/tibjmsDirect/Topic, EDNDataSource_base_domain, eis/wls/Topic, eis/aqjms/Top
ic, RL3TST_base_domain, ArCnTaskForms@EBSConnection@EBSConnection_base_domain, S
OADataSource_base_domain, WLStore_base_domain_UMSJMSFileStore_auto_2},NonXAResou
rces={})],CoordinatorURL=soa_server1+192.168.10.114:8001+base_domain+t3+): weblo
gic.transaction.RollbackException: Could not prepare resource 'ArCnTaskForms@EBS
Connection@EBSConnection_base_domain
JDBC driver does not support XA, hence cannot be a participant in two-phase comm
it. To force this participation, set the GlobalTransactionsProtocol attribute to
LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source
= EBSConnection
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(
TransactionImpl.java:1881)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(Se
rverTransactionImpl.java:345)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTran
sactionImpl.java:239)
at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocal
Object.java:622)
at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetr
y(BaseLocalObject.java:455)
at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(Sess
ionLocalMethodInvoker.java:52)
at oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean_of8dk6_ICubeDelivery
LocalBeanImpl.handleCallback(Unknown Source)
at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMes
sageHandler.handle(CallbackDeliveryMessageHandler.java:47)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:140)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:662)
Caused by: javax.transaction.xa.XAException: JDBC driver does not support XA, he
nce cannot be a participant in two-phase commit. To force this participation, se
t the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended)
or EmulateTwoPhaseCommit for the Data Source = EBSConnection
at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
a:83)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:1327)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:513)
at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
.>
<12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
0000> <failed to handle message
javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot
be a participant in two-phase commit. To force this participation, set the Globa
lTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateT
woPhaseCommit for the Data Source = EBSConnection
at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
a:83)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:1327)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
sourceInfo.java:513)
at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
8)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
<12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
0000> <Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
driver does not support XA, hence cannot be a participant in two-phase commit.
To force this participation, set the GlobalTransactionsProtocol attribute to Log
gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
SConnection
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
driver does not support XA, hence cannot be a participant in two-phase commit.
To force this participation, set the GlobalTransactionsProtocol attribute to Log
gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
SConnection
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:207)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:662)
>
Could any body help on this issue.It is little bit urgent for us to resolve.
Thanks in advance.

Thanks Sudipto Desmukh,
The link is helpful me to resolve this issue.
Thanks,
Narasimha E

Asynchronous RFC call from R/3

I need to make an asynchronous RFC call from R/3. I receive an error message in R/3 stating that my RFC destination can only be of type I (Internal) or type 3 (R/3 system). In order for it to reach XI I need it to be of type T (TCP/IP). Any help would be appreciated.
Here is the function call.
CALL FUNCTION 'Z_B2B_R3_FUNCTIONAL_ACK' starting new task 'SESSION1'
   destination 'RFC2XMBSERVICE'
      EXPORTING
           MSG_TYPE            = msg_type
           ORDER_HEADER_RETURN = order_header_return
      TABLES
           RETURNCODE          = i_return.
the RFC desitnation RFC2XMBSERVICE is of type TCP/IP which by default makes it synchronous.
Thanks,
Jim

hi,
have you tried:
CALL FUNCTION 'Z_B2B_R3_FUNCTIONAL_ACK'
in background task
destination 'RFC2XMBSERVICE'
EXPORTING
MSG_TYPE = msg_type
ORDER_HEADER_RETURN = order_header_return
TABLES
RETURNCODE = i_return.
commit work.
Regards,
michal

Invoke MII Transaction thru RFC Call from SAP

Hi,
We want to get the data from Oracle DB table thru MII (12.0.2).
We need to use RFC call from SAP to MII.
Is it possible to invoke the MII transaction thru RFC by setting in Message Listener?
We have used iDoc messages but not tried with RFC.
How to do that?
Regards,
Senthil

I feel MII doesn't have anything equivalent to RFC in ECC. You may try web services in an ABAP program
Hope the article below helps you
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/9f101377-0c01-0010-269f-c3ee905d583b&overridelayout=true
Regards,
Musarrat

RFC call from Excel using VBA

I am trying to do an RFC call from Excel to SAP using VBA. RFC is working fine for most the RFC enabled Function Modules except DDIF_FIELDINFO_GET and DDIF_FIELDLABEL_GET.
What can be the reason for this?
Can someonme please help me with a macro code where these FMs are working.
Also can someone please help me with some tutorial on SAP connection with Excel.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Nov 12, 2008 9:14 AM

Hello Jon.
DDIF_FIELDINFO_GET is not working for me either. But I have used another FM (/ZOPTION/LIVE_DDIF_FIELDINFO):
Public Sub RFC_FIELDINFO()
Dim Func As Object
Dim sapConn As Object
Dim tblFIELDTAB
Dim tblFIXED_VALUES
Dim intRow%
Dim intCol%
'* Sub     : Call FM /ZOPTION/LIVE_DDIF_FIELDINFO                         *
'* Author : Holger Köhn                                                  *
'* Created : 23.08.2014                                                   *
'* Changed :                                                              *
ThisWorkbook.Sheets("TEST").Activate
Cells.Select
Selection.ClearContents
ThisWorkbook.Sheets("TEST").Range("A1").Select
'* create RFC-Connection                                                  *
Set sapConn = CreateObject("SAP.Functions")
sapConn.Connection.RfcWithDialog = True
If sapConn.Connection.LogOn(1, False) <> True Then
    MsgBox "Cannot Logon to SAP"
    Exit Sub
End If
DoEvents
'* run FM /ZOPTION/LIVE_DDIF_FIELDINFO                                    *
Set Func = sapConn.Add("/ZOPTION/LIVE_DDIF_FIELDINFO")
Func.Exports("TABNAME") = "AUFK"
Set tblFIELDTAB = Func.Tables("FIELDTAB")
If Func.Call = False Then
     MsgBox Func.Exception
     Exit Sub
Else
    Application.ScreenUpdating = False
        For intCol = 1 To tblFIELDTAB.ColumnCount
            ThisWorkbook.Sheets("TEST").Cells(1, intCol).Value = tblFIELDTAB.ColumnName(intCol)
        Next
        If tblFIELDTAB.RowCount > 0 Then
            For intRow = 1 To tblFIELDTAB.RowCount
                For intCol = 1 To tblFIELDTAB.ColumnCount
                    ThisWorkbook.Sheets("TEST").Cells((intRow + 1), intCol).Value = tblFIELDTAB(intRow, intCol)
                Next
            Next
            ThisWorkbook.Sheets("TEST").Activate
        End If
        Columns.AutoFit
    Application.ScreenUpdating = True
End If
'* clear tblFIELDTAB                                                      *
Do Until tblFIELDTAB.RowCount = 0
     Call tblFIELDTAB.Rows.Remove(1)
Loop
Set sapConn = Nothing
Set Func = Nothing
Set tblFIELDTAB = Nothing
End Sub

RFC Call from ABAP (R3) to Webdynpro EP

Hi experts,
I have a requirement to initiate a call from an ABAP program on R3 to a standard Portal (Webdynpro) API. Does anyone have any experience with this?
I understand that normally Portal (Webdynpro) applications will make the RFC call to ABAP via the established JCO connection. However there's very limited literature elaborating how the call can be made in the other direction i.e. from ABAP R3 to Portal
Anyone, please kindly advise how, if this can be done. Many thanks!
Best regards,
Lionel

Hi,
I'm trying to make a RFC call from the ABAP program to a built in Java method residing on EP. It is part of a suite of methods provided by the UME engine.
Typically a call is made from a webdynpro program to a SAP ABAP function module. In this case, I'd like to make a call from the SAP ABAP report to the EP method.
Best regards,
Lionel

Making an RFC call from within the VM container

Hi all,
since a long time I am searching for information on how to implement an RFC call from within the VMC. The problem is that we have implemented several (p)functions in ABAP and we need to implement them in JAVA.
Now I am searching for a way how to just call the already existing pfunctions???
Is it possible to read CRM DB tables too?
Thank you in advance
Boris

Hi Freeto,
This may be due to the Network Failures.
If you have triggered a job then because of the Network fluctuations the system may not respond properly and cannot execute the job.
So, this is the cause for the failure.
Hope you understood.
With Regards,
Ravi Kanth

Excel sheet generation through RFC call from a BSP application

Hi,
I am calling a RFC FM ( in R3) in Event handler 'OnInputProcessing' of a BSP application in a SRM server.
That function submits a report program which geneates a excel sheet using download FM . Excel sheet is not getting generated.
But when i am calling this RFC FM (in R3) from a report program ( in srm server)
this is generating an ecel sheet.
I want to have call RFC from BSP application.
I tried the way of submit a program ( which contains RFC call) from BSP application ,but it is also not generating excel sheet.
My ultimate AIM is to generate excel sheet by trigerring CALL or submit from BSP
application.
can any one propose solution for it.
Useful answers will be rewarded.

Hi,
Which FM is it. I guess that the download generated is a SAP gui oriented solution, which will never work in a web environment
Eddy
PS. Reward useful answers and earn points yourself

RFC call from a Windows Service

Hi All,
I have created a simple windows service which is making an RFC call to R/3 system. This is not working. Whereas the same piece of code written in a windows application projects(exe) works properly. Does anyone had similer issues working with Windows services ? Is it a known issue of RFC calls from windows service ???
Thanks & Regards
Ganesh Datta

Hi Juergen,
After I put the debug statements I figured out that connection to R/3 system is unsuccessful.
I am using the SAP .Net Connector 2.0. I wrote a windows service which is manually started. Withing my service I am using Single sign on to connect .This is what was causing the problem. If I disable Single sign on and supply userID and password then connection is successful and also subsequent RFC calls.
I guess within windows service Single sign on does not work.
Thanks for your reply
Best Regards
Ganesh Datta

Best approach for RFC call from Adapter module

What is the best approach for making a RFC call from a <b>reciever</b> file adapter module?
1. JCo
2. Is it possible to make use of MappingLookupAPI classes to achieve this or those run in the mapping runtime environment only?
3. Any other way?
Has anybody ever tried this? Any pointers????
Regards,
Amol

Hi ,
The JCo lookup is internally the same as the Jco call. the only difference being you are not hardcoding the system related data in the code. So its easier to maintain during transportation.
Also the JCO lookup code is more readable.
Regards
Vijaya

"No Receiver Determined" in BPM Sync RFC Call

My scenario is xml file -> XI BPM -> RFC1 -> RFC2 (will call RFC2 if RFC1 is successful).
I am still just trying to get the RFC1 call working properly. I have been using blogs 1822, 1403 and 1926. I have also used some related BPM threads. It seems to be making the RFC call properly, but failing on the response.
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
These docs show my IB Repository and Directory setups. Can anyone look at them and tell me what is missing? Thanks in advance!
http://webpages.charter.net/kpwendel2/bsmDir.jpg
http://webpages.charter.net/kpwendel2/bsmRep.jpg

Keith,
the problem is quite clear.
In your BPM, you have a synchronous interface in your sync send step.
However, in configuration, you have configured two asynchronous interfaces.
To be able to use sync send step in BPM, your RFC needs to be able to send a response back. Then you need to have two message mappings (one for bpm->rfc messages, and other for rfc_response -> bpm_response messages) and a interface mapping between the 2 sync interfaces (bpm_sync_int -> rfc_sync_int) using these 2 message mappings.
Also, some hints:
1. Don't do these mappings in BPM transformation step. You can execute them outside of BPM. Doing this, you will get better performance and also won't need to create abstract interfaces for RFC messages.
2. Use configuration wizard in Integration Directory (first, remove and reimport your BPM in Integration Directory). This way, you avoid different interfaces errors.
Regards,
Henrique.

Parallel calls from BPM

Hi all,
I have a scenario in BPM where I have used a fork for sending messages in parallel. There are 3 synchronous RFC calls to same R/3 backend system. However, in message monitoring I can see that the messages are still in serial (start time of next message is after the first call has received response). It is somehow possible to achieve that the calls will be also by RFC adapter done in parallel?
I have already tried to use 3 comunication channels, but it does not help.
Thanks.
Vladimir

Hi all,
I have tried all mention settings, but still the messages from adapter are being sent in serial.
I have tried to increase the maximum connection in RFC adapter, I have tried to used more Comunication Channels and set in Receiver Agreements to use them. Both changes also with the following change in process design:
In the process design I have this 3 bapi calls in a loop. For this loop there is also that mode ParForEach. After changing to this mode I can see in message monitoring that the BAPI calls are not being sent as before: b1,b2,b3,b1,b2,b3,.... but in this order: b1,b1,...,b2,b2,...,b3,b3,... However the messages are being still sent in serial.
In Workflow Log I can see that some executed actions on beginning(Block item created, Background work item created) were done in parallel. However the sync. calls itselfs (message sent synchronously) are following in serial.
Are there maybe some settings of Adapter engine or RFC adapter, which allows/deny processing of multiple threads?
I have not found any documentation to such settings till now (except one small comment to MaxThreadCount property of J2EE Adapter Framework in XI Tunning Guide).
Thanks & regards,
Vladimir

RFC-Call from a xslt/javamapping error

Hi.
We implemented an Szenario IDOC to Mail(attachement).
Our incomming IDOC is a standard-IDOC from SAP.
ISU_INTERVAL_USAGE_INFORMATION.ISU_VDEW_MSCONS
our Target is an EDIFACT-File attached to a mail.
We did this succesfully before in a similar Szenario with UTILMD-IDOCs to a CSV-attachement of a mail.
Because there is no Mailinformation in these IDOCs, we do a RFC-Call to a backendsystem (SAP-ISU) wich delivers the information selected by the IDOC-number.
This is the XSLT for this call:
<xsl:variable name="maildata" select="emailadress:new($param1, $param2, $inputparam)" />
<xsl:variable name="from" select="emailadress:getSenderEmailAdress($maildata)" />
<xsl:variable name="to" select="emailadress:getReceiverEmailAdress($maildata)" />
<xsl:variable name="cc" select="emailadress:getCcReceiverEmailAdress($maildata)" />
<xsl:variable name="bcc" select="emailadress:getBccReceiverEmailAdress($maildata)" />
when I test the Mapping in the Integration Builder, the RFC-call gives us the following error message:
08:42:39 Teststart
Creating XSLT mapping iDoc_MSCONS_to_Mail
URIResolver called with href = iDoc_to_MSCONS.xsl and base = iDoc_MSCONS_to_Mail.xsl
Source resolved. System id = iDoc_to_MSCONS.xsl
Call XSLT processor with stylsheet iDoc_MSCONS_to_Mail.xsl.
Method fatalError called, terminate transformation
javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:251) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:377) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) ... 18 more Caused by: com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) ... 20 more -
com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) -
at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:377) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) ... 20 more
TransfromerException during XSLT processing:
javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:251) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:377) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) ... 18 more Caused by: com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) ... 20 more -
com.sap.engine.lib.xml.util.NestedException: -> com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) -
at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:377) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:398) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.transform(MapServiceRemoteObjectImpl0_0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: com.sap.engine.lib.xml.util.NestedException: Variable '$maildata' has not been bound to a value at com.sap.engine.lib.xsl.xpath.ETVariableReference.evaluate(ETVariableReference.java:42) at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:83) at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:56) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:43) at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:51) at com.sap.engine.lib.xsl.xslt.XSLVariable.process(XSLVariable.java:132) at com.sap.engine.lib.xsl.xslt.XSLTopVariable.process(XSLTopVariable.java:42) at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:360) ... 20 more
08:42:39 Testende

Hi Harald,
I guess this is the IDEX package delivered by SAP?
In the latest version of the package SAP also deliveres a package for eclipse to test the mappings.
Also make sure that your data in IS-U (serviceanbieter) is maintained correct!
Regards Mario

Sync RFC call from BPM - message expired

Similar Messages

Maybe you are looking for