"No Receiver Determined" in BPM Sync RFC Call

My scenario is xml file -> XI BPM -> RFC1 -> RFC2 (will call RFC2 if RFC1 is successful).
I am still just trying to get the RFC1 call working properly. I have been using blogs 1822, 1403 and 1926. I have also used some related BPM threads. It seems to be making the RFC call properly, but failing on the response.
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
These docs show my IB Repository and Directory setups. Can anyone look at them and tell me what is missing? Thanks in advance!
http://webpages.charter.net/kpwendel2/bsmDir.jpg
http://webpages.charter.net/kpwendel2/bsmRep.jpg

Keith,
the problem is quite clear.
In your BPM, you have a synchronous interface in your sync send step.
However, in configuration, you have configured two asynchronous interfaces.
To be able to use sync send step in BPM, your RFC needs to be able to send a response back. Then you need to have two message mappings (one for bpm->rfc messages, and other for rfc_response -> bpm_response messages) and a interface mapping between the 2 sync interfaces (bpm_sync_int -> rfc_sync_int) using these 2 message mappings.
Also, some hints:
1. Don't do these mappings in BPM transformation step. You can execute them outside of BPM. Doing this, you will get better performance and also won't need to create abstract interfaces for RFC messages.
2. Use configuration wizard in Integration Directory (first, remove and reimport your BPM in Integration Directory). This way, you avoid different interfaces errors.
Regards,
Henrique.

Similar Messages

Sync RFC call from BPM - message expired

Hi guys,
I have a scenario with BPM where I'm doing a sync RFC call to ECC and then I want to process the result. However, the processing of BAPI take approx 5 minutes and my messages get expired after 3 minutes.
How to resolve this issue?
Thanks a lot,
Olian

Hello,
Problem might be at BAPI end. Please check BAPI by executing with your set of inputs. If BAPI goes for exception for yoru set of input values.. you may not get response from R3. So you might have error..
secondly.. Please post the error in the communication channel and errro in the SXMB_Moni as well.
Thanks,
subbu

Sync RFC call from XI

Hi
I've a requirement for a XI Inbound Order that I need to check for each MATNR on the Order Line it's associated Division (SPART). Once I know the Division I'll then split up the Order per Division.
Can I from my BPM collect the message, call a RFC via Send Sync Step to return the Divisions and then continue with my transformation ?
I was looking for an example of how to call an RFC from a BPM. NOT using Sync<>Async bridge.
Does anybody have a link to a blog etc for that.?

Hi,
You can either use RFC lookup in mapping or use Sync RFC call in the BPM.
Refer the Blog RFC Scenario using BPM --Starter Kit By Arpith Seth for Sync RFC call in BPM.
Refer this document [Mapping Lookups: Remote Function Calls API|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439] for making RFC lokup from mapping.
Thanks
SaNv...

Receiver Determination in BPM, SP16

hi,
I was able to configure multiple receivers succesfully with all your help. Thanks.
Now i have to switch this to BPM beacuse i need to add some error handling logic, so i have to switch to BPM.
In this process will i be able to use my old configuration(cofiguring multiple receivers without BPM)?
If so how? If not should i have to redo this completely using BPM. There are 13 Suppliers now. So will there be that many receiver determinants in BPM?
Any tips would greatly help.
Thanks,
Tirumal

Udo and Vijaya -
In the receiver determination in Integration builder:configuration earlier i used to have IDOC to XML.
So the Receiver Determination for different receivers was configured based on the conditions.
Now i have created a BS where in i convert the IDOC -> Abstract IDOC, Abstract IDOC -> Abstract XML.
In the Integration Process i have the Start, Receive (Abs IDOC), Transform(Abs IDOC to Abs XML), Send(Abs XML), Stop.
The first receiver determinant, i have IDOC to abstract(BPM) configured correctly.
But while i select the BPM as the sender, i should be able to select the Abs IDOC but i can select the Abs XML here.
Any clue why i am not seeing abstract.
Thanks,
Tirumal

BPM synchronous RFC calls

I have two messages, one coming from SOAP and second one from JDBC adapter. I want to map this two messages to Single BAPI call. How do I go about doing this using BPM.

SSG,
1. You will have a fork with 2 branches with 2 receiver steps. One for the SOAP request and the other the JDBC sender adapter.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/24/e2283f2bbad036e10000000a114084/content.htm">Step Type - FORK</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm">Multiple Start Process Receiver Steps</a>
2. Transformation Step -- N:1 mapping where the 2 source messages are mapped to the Single BAPI message.
3. Send Synchronous Step -- You will be sending the BAPI request message and getting the Response message.
You can use the <a href="/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC">File - RFC - File</a> blog as a template to see how synchronous RFC calls are made and then , you can get the RFC response and do the needful as per requirements.
Regards,
Bhavesh

Receiver determination in BPM ..what is used for?

Hi everyone.
I've never used 'receiver determination' step in a BPM. I want to know what is used for.
Regards,
Inigo.

you can ref: this link to find example where a receiver determination step is used in BPM- http://help.sap.com/saphelp_nw04/helpdata/en/43/6211b11c895f6ce10000000a1553f6/content.htm
More abt RD step in BPM - http://help.sap.com/saphelp_nw04/helpdata/en/14/d5283fd0ca8443e10000000a114084/content.htm

Receiver determination in BPM

Hi Folks,
I wanted to send a message to 2 receivers from 1 sender using BPM. People on SDN advice that I have to use 3 receiver determinations for it. I just can't understand why to use 2 receiver determinations where as I have only 2 receivers. Why shall I use a receiver determination for the sender ? Can anybody explain this logic ?
Regards,
Santosh

HI Chandra,
There will be only one reciever determination.
In reciever determination what can be done is one sender and recievers will be two as
well as ineterface determination and reciever agreement will be 2.
Can you explain how is this possible?....In the first receiver determination the connection will be done for Sender --> BPM.....
In second BPM---> Receiver1
In third BPM--->Receiver2
Regards,
Abhishek.

Receiver Determination in BPM - Correct me

Hi everyone,
I came accross some document saying that
<b>every send/ receive step in BPM, there should be one receiver determination.</b>
Can anyone explain this to me.
thanks,
-Naveen.

Hi,
Yes your IP will be another service like your Business Service/System
If your BPM is like this
receive>Transform>Send
then in ID receiver determiniation would be
SenderBS --> IP
IP-->RecieverBS
Regards,
Prakash

BPM - Do we need receiver determination step between trans and sync send?

Hi Gurus,
I have a 1:1 transformation step followed by a sync send step. The transformation step is executing fine. While the sync step is executing, I am getting an error says 'No receiver determination found'.
While I am executing this sync step in a separate, it is working fine.
Do I need to have 'Receiver determination step' between Transformation step and Sync send step? I think so. Can somebody confirms this?
Thanks for your kind help.
Kalyan

Hi,
I think there is no need of a Receiver determination step in the BPM.
You should have a proper receiver determination in configuration for this BPM scenario. (i.e) A receiver determination from BPM to the service configured for the synchronous interface.
Regards,
P.Venkat

BPM step Receiver Determination

Hello Friends,
the operator "Receiver Determination" - how can be used in BPM? Is there any weblog or example for that?
Best Regards,
F.K.

check this link
Receiver Determination in BPM
Use of Receiver determination step in BPM

"receiver-determination" step and multiline container

i have made a file2file scenario where:
there is a BPM,
the BPM contains a receive step,
a transformation that mapps the incomin message to two messages(Split-messgae case),
and then a FORK step which sends the two messges to through 2 SEND steps to the intended receiver services.
It didnt work......and i followed a blog-> /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure ............... which suggested to have a
"receiver-determination" step in the BPM before the SEND step.... it says that this
"receiver-determination" step will put the message in a MULTILINE container..
i m confused bout this step ........ can anybody explain.....
please help

Receiver Determination step will return all receivers that are configured in Integration Directory, for that particular message interface, having the BPM as the sender service.
So, more than one receiver may return. Hence you need to define the receiver container as a multiline container.
Here you go with explanations- for Receiver Determinations in BPM-
http://help.sap.com/saphelp_nw04/helpdata/en/11/13283fd0ca8443e10000000a114084/content.htm

Dynamic Receiver Determination [W/O using BPM] Sync interface

I have been exploring options w.r.t. performance sensitive service interface.
This has following issues :
1. Gets a org code looking up instance and route the msg. accordingly to an RFC and get response back.
2. Prominent answer would be Enhanced receiver determination step but that doesnt work in sync case.
3. Classic Receiver Determination needs the condition to be evaluated in source msg. which is not going to happen.
4. Use BPM i designed one but performance its not all acceptable it has a round trip of 10Sec.
are there any ways to overcome this ?

Hi Bujji,
can you explain the point 1.
<i>1. Gets a org code looking up instance and route the msg. accordingly to an RFC and get response back.</i>
Thanks and Regards,
Himadri
null

Is multiple receiver determination possible in a Sync scenario

Hi I have a scenario - Syncronous interface -> RFC to JDBC. There are two target databases. based on the one of the input fields in the source message I have to route the database call to one of the two databases.
When i put the condition (which is mutually exclusive - one onlt receiver is always selected at a time) in the receiver determinationand executed the interface I got a message saying sync messages cannot have multiple receivers ... even though the condition was such that only BSwould have been selected..
Is there some work around for this?
regards,
Arvind R

Hey
As far as i know, its not possible to have multiple Syn receivers with regular Receiver Determination.
You can try 2 options:
1. Try using "Extended Receiver determination" instead of regular Receiver determination, not sure if it will work but worth a try.
2. Use BPM as given in below help.
http://help.sap.com/saphelp_nw04/helpdata/en/11/13283fd0ca8443e10000000a114084/frameset.htm
Thanks
Aamir

RFC call From BPM

Hi,
I have a scenario where I need to access a Function Module from BPM for certain business validations. My FM is in XI and I need to invoke that FM from BPM. How can we do that ? I am trying an RFC call but it gives me an error "No identifier defined for the system".
Pl advise, where am I wrong OR if there is a better way to do that.
Thanks,
Sid

This doesn't look like an issue for BPM. Please check whether the connection is working fine by testing a call to the RFC in a simple scenario(file to RFC or whatever).
In BPM all you need to do is a synchronous send step with abstract message type defined for both request and response structures of the FM . And in ID a receiver determination+channel and all for this step.
Best of luck...

Need help with scenario BPM Http-RFC Sync/async bridge

hi all!
i've got the following scenario: HTTP-BPM(XI)-RFC synchronous both of them. for that, i'm using S/A bridge in the BPM, but i'm getting the error 'Timeout condition of pipeline reached'. i think the problem is that the process gets lost in the sync/async communication, because in the trace level shows CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV" and after that every message are 'wait time starting'.
don't know the reason of the error. Maybe I missed something to configure?
the BPM is like this:
Receiver(Open Sync/Async bridge) -> Transformation (mapping from http request to RFC request) -> SyncSend (RFC request and response) -> Transformation (mapping from rfc response to http response) -> Send (Close S/A Bridge)
the IR is configured like this:
Message Types u2013 External Definitions u2013 Imported Objects
mt_cxml_request -> contains xsd of xcml request template.
mt_cxml_response -> contains xsd of xcml response template.
zintegracion_pedidos -> imported RFC from R/3
zintegracion_pedidos.response -> imported RFC from R/3
Message Interfaces
mi_cxml_request_async_abs
mi_cxml_request_sync_abs
mi_cxml_request_sync_out
mi_xcml_response_async
mi_rfc_request_asyn_abs
mi_rfc_request_sync_abs
mi_rfc_request_sync_in
mi_rfc_response_async_abs
Message Mappings
mm_cxml_request_to_rfc_request -> mapping from http request (cxml) to rfc request.
mm_rfc_response_to_cxml_response -> mapping from rfc response to http response (cxml).
Interface Mappings
im_cxml_request_async_abs_to_rfc_request_async_abs
im_rfc_response_async_abs_to_cxml_response_async_abs
and the ID is configured like this:
Business system DES -> created business system for RFC adapter with interface mi_rfc_request_sync_in as receiver. Comunication channel u2018RFC Receiveru2019
Businnes service VW -> created businnes service for HTTP adapter with interface mi_cxml_request_sync_out as sender. Comunication channel u2018HTTP Senderu2019
Receiver Determination
two receiver determinations. One for BPM and the other one for RFC(R/3):
|VW| mi_cxml_request_sync_out:
|BPM_PO| mi_rfc_request_sync_abs:
Interface Determination
two interface determinations:
|VW| mi_cxml_request_sync_out | | BPM_PO:
|BPM_PO| mi_rfc_request_sync_abs | * | * :
Sender Agreement
VW
mi_cxml_request_sync_out
Receiver Agreement
|BPM_PO| |DES| mi_rfc_request_sync_in

hi all,
i've removed the transformations from the BPM, and i've created:
in IR:
- interface mapping: im_xcml_request_to_rfc_request_sync_abs
                                source interface: mi_cxml_request-sync_abs
                                target interface: mi_rfc_request_sync_abs
in ID:
- receiver determination: |VW| mi_cxml_request_sync_abs
                                  sender service: VW
                                  interface: mi_cxml_request_sync_abs
                                  receiver: DES
                                  interface mapping:im_xcml_request_to_rfc_request_sync_abs
- interface determination: |VW| mi_cxml_erquest_sync_abs ||
                                     sender service: VW
                                     interface: mi_cxml_request_sync_abs
                                     inbound interface: mi_rfc_request_sync_abs
                                     interface mapping: im_xcml_request_to_rfc_request_sync_abs
- receiver agreement: |VW| |DES| mi_rfc_request_sync_abs
                               sender service: VW
                               receiver service: DES
                               receiver interface: mi_rfc_request_sync_abs
not sure these are the steps i had to do for mapping xml to rfc. but the result is the same error as before, the timeout.
i couldn't test with RTW because i'm getting an error 401 unauthorized.
i'd do it without BPM but the issue is that i wanted to add another step that would be to send the response from rfc to mail too once i got this BPM running. i mean, the response from RFC would be sent to http response and mail both.
the only way i can imagine to do it is with BPM but i'm really fed up with it.
thank u very much folks

"No Receiver Determined" in BPM Sync RFC Call

Similar Messages

Maybe you are looking for