Sync-Sync Scenario.. To Send Response back to Sender.

Hi All,
I got a scenario to send the data to BI through proxy and get the response back to PI and pass it to sender system.
Request:
Store system Sync call(Soap)>PI->Sync call(ABAP proxy)>BI
Response:
BI(response to Sync call)>PI>Store system.
The response has to go back to sender system with in few seconds. So I need to priotirize this scenario separately in both Integration and Adapter engine. This scenario should not collide with any other scenarios as the response has to deliver ASAP.
Can we acheive this? Is there any better method to deal with this kind of scenario in terms of performance? Kindly suggest your ideas.
Thanks
Deepthi

i conused why are you using BPM for this, any way SOAP adapter,ABAP proxy supports sync calls . dont required BPM.
Yes. Now I decided to go without BPM. I'm getting the below error from the proxy. Any idea about this error?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>ZPI_CL_MI_BAPI_SYNC1</SAP:P2>
<SAP:P3>EXECUTE_SYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_SY_DYN_CALL_PARAM_NOT_FOUND occurred, but was neither handled locally, nor declared in a RAISING clause Call of the function BAPI_COMPANY_GETDETAIL failed; the formal parameter COMPANY_DETAIL does not exist</SAP:Stack>
<SAP:Retry>M</SAP:Retry>

Similar Messages

Soap(sync) to RFC(Sync Scenario ,error in response

Dear all,
For Sender,I created 2 message types
request
record
getdetail                        1..1
Response
Details
Records                       0..1
items                             1-- unbounded
1                                    0-1
2                                     0--1
3                                     0--1
4                                     0--1
The Rfc is imported in to Imported objects which has similar structure as source i.e same occurrences and higher levels.
I took 2 message mappings
1)MT request to RFC Request
2)MT Response tp RFC Response
Operation mapping
req_out(MT req,MT_res)---- RFC(MT)
The problem is while testing in operation mapping ,I am getting error in Response.
in Message mapping as an individual mapping it is working fine(tested in mm test tab).
I did not configure the ID,Is it required to get the response.
if not pls provide me pointers on the same.
We are using PI7.3,are there any changes in generating and publishing the WSDL.
Can I use Integrated configaration for this scenario.
If I use it where to pudlish wsdl as there will be no sender agreement to publish in SR.
Thanks
Pi

Hi,
>>>The problem is while testing in operation mapping ,I am getting error in Response.
COnfiguration objects need to be created & test as full scenario.
B'cos, it need to hit RFC of ECC & provide back the response.
>>>in Message mapping as an individual mapping it is working fine(tested in mm test tab).
so, the mapping part is working fine.
>>>I did not configure the ID,Is it required to get the response.
if not pls provide me pointers on the same.
Yes. configure the ID objects.
>>>We are using PI7.3,are there any changes in generating and publishing the WSDL.
Not sure, but, it should be same. Create all the objects & generate the WSDL.
>>>Can I use Integrated configaration for this scenario.
Yes. it can be used.
>>>If I use it where to pudlish wsdl as there will be no sender agreement to publish in SR.
why NO SA. it should be created in this scenario.
-santosh.

Error with Proxy - Soap sync scenario - "invalid http response:HTTP/1.1 5"

Hello,
I'm working on a PI scenario as displayed below:
Proxy <-> ECC <-> Soap
I've already imported the WSDL provided by 3th party and mapped one of the actions of the interface.
In the PI configuration I`d created the Scenario, using a Soap Receiver communication channel, passing only the URL and the action (no more options used).
When I`m trying testing using SPROXY or Runtime Workbench, the error bellow is displayed, and no receive message is created:
"com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: HTTP/1.1 5"
Someone knows the error cause?
Thanks,
Ana Paula Lavieri

Hello,
"com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: HTTP/1.1 5"
HTTP 1.1 is not natively supported by standard SOAP or Plain HTTP Adapter, you should use SOAP Axis for that. See SAP Note 1039369 - FAQ XI Axis Adapter, under Receiver Adapter General -> 16. Can I use HTTP 1.1? Otherwise, you would have to ask the third-party to use HTTP 1.0 instead.
Hope this helps,
Mark

Can you explain steps in the Async and Sync scenarios JDBC to RFC.

Hi,
Can you explain some basic steps in the Async and Sync scenarios for sending data from JDBC to RFC.
Like,
The data is picked up from the database table through JDBC adapter.
It is passed on to SAP by calling the RFC. RFC gets executed
successfully. The status is returned by the RFC. The status needs to be
updated back into the SQL database table.
Is this a sync case or async case.
What si the diffrences in the sync and async scenarios in the above JDBC to RFC scenarios.
Soorya

hi check the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
JDBC Synchronous call using BPM
Data Types -
1) File Input
2) JDBC Req
3) JDBC Response
4) File Response of similar type of JDBC Response.. ( This you can avoid also..let it be for first time)
Message Types
4 for each data type
Message Interfaces
1) Async, Outbound, Interface, to receieve the file
2) Async, Inbound , Interface to send the file from XI
3) Async, Absract , Interface of type File message type to recieve the message in the BPM
4) Sync, Abstract Interface with Req message type as File Request, and Response Message type as a file Response
5) Sync , Inbound interface for JDBC with Input message type as a JDBC Request and Output Message type as a JDBC Response
Message Mapping:
1)Mapping between File Req to the JDBC req
2) JDBC Response to File Response
Interface mapping:
1) Sender Interface as a Sync,Abstract Interface created for the file type and target interface as Synchrnous JDBC interface.
Use corresponding mapping for Req and Resp..
note:reward points if solution found helpfull.....
regards
chandrakanth.k

Sending Request Mapping errors back to a consumer for a sync scenario

Hello Experts,
I have a sync scenario (JAVA Application <-> PI <-> CRM (service)) where i want to send back any mapping exception that occurs in PI on the request side of the call, back to the consumer.
I also want to communicated back to the consumer, if there are any connection failures between PI and CRM.
I have implemented Fault Mapping in my scenario. Will this take care of any connection failures between PI and CRM also?
Your suggestions are highly appreciated.
Warm Regards,
Anshul

Hello,
I have a sync scenario (JAVA Application <-> PI <-> CRM (service)) where i want to send back any mapping exception that occurs in PI on the request side of the call, back to the consumer.
You can use the XI alerting framework for that, here are some references:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
XI: Alerts - Step by step (Step-by-Step blog by Michal)
I have implemented Fault Mapping in my scenario. Will this take care of any connection failures between PI and CRM also?
Fault Mapping is for application errors only, it will not handle system errors.
Hope this helps,
Mark

RFC Sender and RFC Receiver Sync Scenario . Help required.

Hi,
I need to make RFC Sender and RFC Receiver Sync Scenario.
Any docs/links for it.
Regards

Hi,
I have CRM (r/3) and DM (r/3)system.
Data from differnent tables of CRM system needs to go to
DM system different tables , data will be saved there and then return response back to CRM system.
For this I have given one RFC for CRM system
For this I have given one RFC for DM system
So I have to make Sync Outbound Interface
and Sync Inbound Interface.
So I think so no BPM is required.I am correct?
Adapter -- RFC Sender and RFC Receiver Adapter.
Regards
Edited by: Henry H on Jan 29, 2008 11:20 AM

(SOAP sender) --- XI ---- R/3 (RFC receiver) this sync scenario

Hi Experts,
Webservice(SOAP sender) < - > XI <--> R/3 (RFC receiver) this sync scenario tested with Infopath successfully.
I have given partner number,student object id are the two input fields(request) and i am getting student number as response. This scenario is working when i use MS infopath.
I have generated WSDL file embedded with below URL
http://xxxx.yyytec.passh.ed:7271/XISOAPAdapter/MessageServlet?channel=:Webservice_Sender_BS:GET_NUMBERS_Sender_CC&version=3.0;amp;Sender.Service=Webservice_Sender_BS;amp;Interface=urn%Apache
Sender business system: Webservice_Sender_BS
Sender CC: GET_NUMBERS_Sender_CC
Msg Interface: STU_GET_NUMBERS_Synch_MI
now we want to test from third party website, what are the things to be provided to the website developer to test the scenario.
the way i generated URL, is it correct?
if i provide above URL and generated WSDL in XI , is it enough for web developer to enter the input fields to RFC(r/3) via XI as webservice request and getting back response from RFC(r/3) to webservice via XI.
can you please advice if any body worked on this kind of scenario.
Thanks
Dhanush.

For the developer you have to provide WSDL file so that they know the input/output fields and write the code.
URL is correct.
Other informatino they required is Username and password of you PI system.
Gaurav Jain
Points if answer is helpful

SOAP to RFC - Sync Scenario. How to find where the response is going to?

Hello All
I have a SOAP to RFC sync scenario.
In SXMB_MONI, i see that both the initial message and the response message are successfully processed.
But, the SOAP sender is not receiving the response message.
How can i trouble shoot this scenario? How can i findout what is going wrong?
Most importantly, How can i find out the web address of the SOAP sender? I do not see it anywhere.
Thanks

Hi Chandra,
Please check this blog.
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
You can by pass your message through a TCPIP gateway , this will help you to see the message contnet and the SOAP header information.
TCPIPGW application is availabel in one of the SAP notes for Monitoring SOAP adapter. and 2 SAP SDN PI blogs are also there on how to use this application...
Regards
Sunil.

RFC Send (Sync) --- XI -- RFC Rec (Sync) scenario. Pls help

Hello All,
There is one scenario
RFC Send (Sync) --- XI -- RFC Rec (Sync)
Now I want to make it to async as I do not need response
RFC Send (Async) --- XI -- RFC Rec (Async)
1. I know about Abap Client and Server Proxy that can be
    async but the RFC's are very complex in nature. I am not
    and abaper also
    Can there be a way that Sender and Receiver RFC can be
    made Async. Or any other simple way.
Regards

Hi Swarup,
I have done the same thing.
I have removed the export parameters of both the RFCs
In interface mapping I used the request message mapping. and kept the response mapping part blank.
Now when I run this scenario it works fine but also
in sxmb_moni I see two messages.
One for my request mapping. -- ok .
Second empty message for response mapping.
I do not want this second message in my sxmb_moni.
Pls advice
Regards

HT5654 after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails. when plugged in to sync with itunes, it remains 'stuck' at syncing step 2 of 7 backing up. has anyone had similar problems? any solutions

after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails. when plugged in to sync with itunes, it remains 'stuck' at syncing step 2 of 7 backing up. has anyone had similar problems? any solutions?

I had this problem. I held down the power switch to power down completely. Takes a few seconds. Then use the power switch to turn on. Might take a couple goes.
Kirk

RFC to JDBC Sync Scenario and get JDBC response

Hi All,
We need to create RFC to JDBC synchronous interface with update_insert action.
And we need to get the number of records updated or inserted as response and map the response and send it back to ECC as RFC response mesg.
I have gone through the help document on JDBC and it says :
The response document has the following format; one of the two values is always 0 because either an UPDATE or an INSERT action is always executed:
<update_count>count</update_count>
<insert_count>count</insert_count>
Now following is the question: Is this this the standard feature? Because in our case Database side they will not be sending any response back.
So with the synchronous receiver JDBC channel would we get this update and insert count as response by default?.
Please help with replies.
Thanks,
Jane

Hi Jane
No setting needs to be done by the Database team, it is a standard feature.
Whenever you insert or update records in DB using the JDBC Adapter, you will get the response with the count.
If insertion fails due to some reason in JDBC Adapter, then there will be no response.
Regards
Osman

Sending response back to RFC in UDF

Hi All,
I have a Sync scenario from RFC to SOAP. I want to check the line items in RFC request. If there are no line items , then i want to stop the scenario and use UDF to send the constant (Invalid line items based on validations) back to RFC responce by using RFC lookup.
Is it possible to send response back to RFC in UDF?
Please suggest me, i want to handle exceptions without BPM.
Thanks and regards
Uma

hi,
>>Is it possible to send response back to RFC in UDF?
I don't think such an option exists in standard
but maybe you can do the check in the RFC much faster instead os checking
this in XI ?
Regards,
Michal Krawczyk

Xml validation in File to RFC Sync Scenario with Validation fails message

Hi All,
We are using PI 7.4 (Dual Stack) the Requirement is File to RFC Sync Scenario(File <---> RFC).and need to do XML validation against XSD Schema. if any Validations fails Response message should send back to sender.RequestResponseBean standard module is using for File to RFC Sync scenario but how to send the response message to sender if any validation fails. adapter level XML validation is not helpful for this requirement. please help out me how to achieve the requirement with graphical mapping.
Thanks in advance.

to validate schema you cannot solve it with graphical mapping but validating the schema in the AAE or the integration engine.
y recomend you to use the AAE validation at sender side, coz the sender system will be notified in case of schema errors.
The response will be validated at Integration Server level.
you can search in the forum, you will get many document about how to configure it.
take a look to my blog: PI 7.3 - XML Validation

Async/Sync Bridge with SOAP response

Hi All
I have a interface that uses BPM for async/sync bridge(SOAP->RFC->IDOC). I now need to change this to send response back to he webservice.
Any ideas on how to achieve this?
Regards

avoid the BPM.
just do a simple SOAP to RFC scenario here - Walkthrough - SOAP XI RFC/BAPI

SOAP FTP SOAP Sync Scenario

Hi,
I am working on scenario where PI receiver XML message through SOAP Adapter and then transform into tab separated text and send it to FTP location, now requirement is to send back synchronours respose back same XML message with adding one more tag as Status In Process.
I am fine till sending text File to FTP location but how to send Sync XML response back with additional Status tag.
There r few solution use BPM Sync Async bridge, can we do it without using BPM. Even if i am using BPM, even after sending File i need Send Sync step to send back message to close Sync Asyn Bridge in BPM it means i need Sender Agreement with Sender communication channel to send corresponding response message to BPM. is their any alternate way to the same.
With Regards
Sunil

now requirement is to send back synchronours respose back same XML message with adding
one more tag as Status In Process.
not sure if you can add a tag to a already defined structure.....
What you can do in this case is
1) If you are using a wsdl of some other application then ask them to modify the response message to accomodate the Status tag ( if it is not present already).....then you can populate this in a mapping..
Can you tell me when the Status in Progress should be populated?
Is there any response coming from FTP which you will use as an indicator to say Status in progress?
OR is it when you send the FIle you need to correspondingly popluate Status in Progress tag and send to SOAP sender (irrespective of what happens in the FTP end)?
Regards,
Abhishek.

Sync-Sync Scenario.. To Send Response back to Sender.

Similar Messages

Maybe you are looking for