Synchonize Form on Popup to Selected Record of Table
I'm trying to recreate what I've done on OAS Portals in Weblogic/ADF. I have JDeveloper 11.1.1.2.0. What I need to do seems to be a little different than the tutorials: I need something like the Master/Detail tutorial, but instead of the detail being shown on the same page, it should appear in a popup. I have succeeded at building the table/popup part. But when the popup appears, it is displaying the wrong record. These are the steps I used to create this page:
After creating ADF Fusion Middleware project:
1. Create models for tables I need.
2. Create JSF Page.
3. Drop panelCollection on page.
4. Drop my View data control into panelCollection and choose ADF Read-Only Table. Enable Selection and Sorting options.
5. Change table properties: DisplayRow=selected, EditingMode=clickToEdit
6. Drop Popup on page.
7. Drop my View data control into popup and choose ADF Form. Enable Submit option.
8. Drop showPopupBehavior onto page. Set name of popup. Set triggerType to "selection". (triggerType of "click" works, too)
9. Deploy.
The table appears. I click a row. The popup appears. The popup form is displaying the first record in the table. No matter what row I click.
I just bought the Oracle Fusion Developer Guide 11g but have not been able to address this issue yet.
Any ideas?
Thanks.
Thanks for the reply.
The steps in my first post are all I've done. I dragged View1 to the main page and chose ADF ReadOnly Table. When I created the popup, I dragged the same datacontrol into the popup and chose ADF Form. Since it's the same view, there aren't any links.
I realize that I called this Master/Detail in the first post. But it's not really Master/Detail. The popup is to show a Form view of the selected row from the table.
Setting the partialTrigger doesn't change anything. But maybe I'm doing it wrong. What I did was select the popup element and choose Edit from DownArrow next to partialTrigger. From there I navigated to the table (table* -> t1) and selected it (by moving it to the right screen with the right arrow icon). My understanding is that the partialTrigger is set on the element that wants to Receive notice; and the value is set to the element that should send the notice (trigger).
Something I noticed is that in the table the values in the rows come from the EL expression #{row.ColumnName}. But in the Form the values come from #{bindings.ColumnName.inputValue}. Should I be trying to pass the "row" variable in somehow?
Similar Messages
-
Form does not display all records from table
Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thankshi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal -
How to save the selected records from Table control in dialog programming
Hiiiiiiii Every1
Actually the problem is like this:-
I have to select some records from table control and then want to save the selected records in DB table.
Example
I have some rows having inforamtion bout employees...
Now what i want is that when i click on 'SAVE' button then these selected rows should be moved into DB table.
Sachin Dhingrasee below example, I have added INSERT option after DELETE option.
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA cols LIKE LINE OF flights-cols.
DATA: ok_code TYPE sy-ucomm,
save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
TABLES demo_conn.
SELECT * FROM spfli INTO TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'TOGGLE'.
LOOP AT flights-cols INTO cols WHERE index GT 2.
IF cols-screen-input = '0'.
cols-screen-input = '1'.
ELSEIF cols-screen-input = '1'.
cols-screen-input = '0'.
ENDIF.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
WHEN 'SORT_UP'.
READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
IF sy-subrc = 0.
SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDIF.
WHEN 'SORT_DOWN'.
READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
IF sy-subrc = 0.
SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDIF.
WHEN 'DELETE'.
READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
IF sy-subrc = 0.
LOOP AT itab INTO demo_conn WHERE mark = 'X'.
DELETE itab.
ENDLOOP.
ENDIF.
WHEN 'INSERT'.
READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
IF sy-subrc = 0.
LOOP AT itab INTO demo_conn WHERE mark = 'X'.
itab1 = itab.
modify itab1.
ENDLOOP.
ENDIF.
if not itab1 is initial.
INSERT dbtab FROM TABLE itab1.
endif.
ENDCASE.
ENDMODULE. -
Adobe Form - data from previous selected record is shown.
Dear All,
i have created a wd component consisting of two views.
in the first view i am displaying an alv which is bound to an internal table.
on selecting a record and clicking a button the second view gets called containing an interactive form (adobe form)
have provided a native wd submit button in the form which again calls the first view.
The first time when i run the program it works fine.
after clicking on submit the first view gets called again.
now if i select another record, the adobe form gets the previous value even though in the context it shows me the current record.
it always displays the record one previous to the current records selected.
kindly give ur valuable suggestions.
Regards,
NitiKeep in mind I'm not using a textfield component, just a
dynamic text box with the variable 'name' applied to it. Also,
doesn't it matter that send_lv.fname was created within the
LoadVars() method?
At any rate, I tried doing what you said with the following
code:
name = send_lv.fname+""+send_lv.lname;
However, what i end up getting in the textbox is
'undefinedundefined'. I can't apply variables to the text fields
instead because then it won't process the data to my php script.
Any other suggestions? -
Query Regarding fetching selected records from table
Hi All,
I have a table like below:
NUM1 NUM2 TYPE
1 2 A
1 2 S
2 3 S
3 4 A
3 4 S
4 5 S
If for a record TYPE='A' then do not select the records for those num1 and num2.
Eg: for num1=1 and num2=2 there are two records with type='A' and 'S', only records with type 'A' should get selected.
Output should be like this:
NUM1 NUM2 TYPE
1 2 A
2 3 S
3 4 A
4 5 S
Please anyone could help me in this query.
Any help would be highly appreciated.
Thanks & Regards
AnujJust MIN function will get what you want
SQL> with t
2 as
3 (
4 select 1 num1, 2 num2, 'A' type from dual union all
5 select 1, 2, 'S' from dual union all
6 select 2, 3, 'S' from dual union all
7 select 3, 4, 'A' from dual union all
8 select 3, 4, 'S' from dual union all
9 select 4, 5, 'S' from dual
10 )
11 select num1, num2, min(type) type
12 from t
13 group by num1,num2
14 order by num1,num2
15 /
NUM1 NUM2 T
1 2 A
2 3 S
3 4 A
4 5 S -
Selecting records from table A where A.date = max of date from table B
Hi,
I am new to OBIEE, How can I build the following Oracle query in OBIEE....
select a.F1, a.F2, a.F3, a.date
from Table1 a
where a.date in
(select max(b.date) from Table2 b where
b.F1 = a.F1
GROUP BY by b.F1)
I tried Rank, Top, Aggregate however did not get the desired result.
Thanks, RohitYou can create another request and use the results of that request as a Subquery in the filtering of the master request.
-
Select Records between Begin Date/Time and End Date/Time
Hi, I need to select records from table GLPCA where the CPUDT and CPUTM are between a START DATE/TIME and END DATE/TIME.
I have the below logic from an SAP Solution, but it doesn't seem to be working right in my opinion. It is picking up records earlier than the date ranges. Can anyone tell me how I might be able to accomplish this? I'm hoping this is an easy one for the ABAPPERs...
Thanks,
START DATE 20091022
START TIME 125736
END DATE 20091022
END TIME 135044
CPUDT 20091022
CPUTM 100257
SELECT * FROM GLPCA
WHERE ( CPUDT >= STARTDATE AND ( CPUTM >= STARTTIME OR ( CPUDT <= ENDDATE AND CPUTM <= ENDTIME ) ) ).Thank you all! I ended up using the following:
SELECT * FROM GLPCA
WHERE RYEAR IN L_R_RYEAR
AND ( ( CPUDT = STARTDATE AND CPUTM >= STARTTIME ) OR CPUDT > STARTDATE )
AND ( ( CPUDT = ENDDATE AND CPUTM <= ENDTIME ) OR CPUDT < ENDDATE ).
This child was born from the following thread that was found:
update date and time of client record -
How to edit the selected record through a popup page
Hi, can anyone help me to handle the case ?
1) In main page, there is a datatable showing the record list. Click a commandLink in the selected record to popup a screen for user edit.
2) The data is validated and then saved into database after clicking the submit button in the popup.
3) Finally, the main page is refreshed with the latest record list.
ThanksJust like any other servlet or form-processing script. What would a mere HTML page know about "systems"? Put the URL into the form destination attribute and be done.
-
Adobe form displaying data of previous selected records
Dear All,
I have created a wd component consisting of 2 views.
In the first view i am displaying an ALV. When i select a record and click on the alv button, the second view
gets called which contains an Adobe Form showing the data.
The problem i am facing is that the record which gets displayed in the adobe form is the one previous selected record and not the current record which i select.
Kindly give your valuable suggestions .
Regards,
NitiHi ,
Adobe form is just an external media in your case , it has nothing to do with your data.
Check what data is getting passed to adobe form via debuging .
check if your getting the selected element .
You can also post your code here if possible.
Regards
Kuldeep -
Handling popups in bdc recording
Hi,
I am doing bdc recording for a transaction, and there is a popup screen to be handled by the user, but when i am doing recording it is not recording the popup menus. can you please tel me how i can handle popups in BDC recording.
It is very urgent.
Thank you.Hi Ameen,
Award points if useful...
Step by Step approach to ceate simple BDC session program using reusable template.
This step by step approach can be used to create a Simple BDC program i.e for a transaction which does not have any table control / looping at screen table. The same can also be enhanced to develop a program for transactions involving table controls .
1. Create a new program as executable program using SE38 transaction code.
2. Copy the following template code into your program .
---- Start of Template -
REPORT NO STANDARD PAGE HEADING LINE-SIZE 200 LINE-COUNT 300.
*-- DATA DECLARATION--
*---Types
DATA : BEGIN OF t_upload,
FIELD1(10),
FIELD2(2),
FIELD3(18),
FIELD4(35),
END OF t_upload.
*--- Tables
DATA : BEGIN OF i_bdcdata OCCURS 0."to hold the transaction record
INCLUDE STRUCTURE bdcdata.
DATA: END OF i_bdcdata.
DATA: i_upload LIKE STANDARD TABLE OF t_upload," to hold file data.
i_upload1 LIKE STANDARD TABLE OF t_upload." to hold file data.
*--- Work Areas
DATA: wa_upload2 LIKE t_upload,
wa_upload LIKE t_upload,
wa_upload1 LIKE t_upload.
*--- Variables
DATA: v_count1(4) TYPE n,
v_error TYPE c,
v_session(12),
v_field(21) TYPE c,
v_message(60) type 'C'.
*--Constants
DATA: c_open TYPE c VALUE '(',
c_close TYPE c VALUE ')',
c_x TYPE c VALUE 'X'.
*---Initialisation
initialization.
refresh : i_upload , i_upload1 ,i_bdcdata.
-------Selection Screen Design -
*Selection screen for input of upload file address
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
---AT SELECTION SCREEN -
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*--For popup to select file.
PERFORM give_help.
-----START OF SELECTION -
START-OF-SELECTION.
*--Data upload using WS_Upload.
PERFORM get_data.
*-- OPEN SESSION
PERFORM open_group.
*--Insert transactions using BDCDATA table in the session.
PERFORM do_transaction .
*-- Close the session.
PERFORM close_group.
END-OF-SELECTION.
*& Form f_get_data
For data upload from external file.
FORM get_data.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_upload
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
DELETE I_UPLOAD INDEX 1.
ENDIF.
ENDFORM. " f_get_data
*& Form F_open_group
To open session in session management.
FORM open_group.
v_session = 'TCODE'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = v_session
user = sy-uname
keep = 'X'.
ENDFORM. " F_open_group
*& Form f_do_transaction
Insert transactions in session after passing values to BDCDATA
FORM do_transaction.
LOOP AT i_upload INTO wa_upload .
*---- insert your generated codes from recording at SHDB here
*----- insertion ends
perform bdc_transaction using 'TCODE'.
REFRESH : I_BDCDATA.
CLEAR : WA_UPLOAD.
ENDIF.
ENDLOOP.
ENDFORM. " f_do_transaction
*& Form bdc_dynpro
For appending screen details to BDCDATA
FORM bdc_dynpro USING program dynpro.
CLEAR i_bdcdata.
i_bdcdata-program = program.
i_bdcdata-dynpro = dynpro.
i_bdcdata-dynbegin = 'X'.
APPEND i_bdcdata.
CLEAR i_bdcdata.
ENDFORM. "bdc_dynpro
*& Form bdc_field
For appending field details to bdcdata table
FORM bdc_field USING fnam fval.
CLEAR i_bdcdata.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
APPEND i_bdcdata.
CLEAR i_bdcdata.
ENDFORM. " bdc_field
*& Form bdc_transaction
For inserting Transaction in the session
FORM bdc_transaction USING tcode.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = tcode
TABLES
dynprotab = i_bdcdata.
ENDFORM. " bdc_transaction
*& Form F_close_group
For closing the session created in Session manager SM35
FORM close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
concatenate 'Session ' v_session 'successfully created' into v_field.
MESSAGE v_field type 'I'..
CALL TRANSACTION 'SM35'.
ENDFORM. "f_close_group
*& Form f_give_help
For user help to select file
FORM give_help.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
mask = ',.,..'
mode = 'O'
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc <> 0 AND NOT sy-msgty IS INITIAL.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f_give_help
---- End of Template -
3.Go to the transaction SHDB in another session ( you can also give TCODE - OSHDB in transaction code window and hit enter ).
4.Create you transaction recording in SHDB . Ensure your transaction recording takes care of input values to all the
fields to which you intend to pass values in the BDC.
5.Once your recording is done correctly create the program from recording in the SHDB transction . You will find the button to create program in SHDB . Choose the option of creating from file when you proceed through the subsequent steps.
6. Define data type t_upload and structure wa_upload in the template program with fields of structure 'RECORD' from the program generated using SHDB recording ( replace the field1, field2 and so on as per your requirement). For your understanding you can remove the suffixes to the
field name but keep the field size unchanged.
7.Copy the coding existing between 'do' and 'enddo' statement from the generated program . Insert the copied code between the loop and endloop code of form 'Do_transaction '. Replace fields of structure 'RECORD' with respective fields of structure wa_upload.Insert constant values wherever possible in transaction recording.You can also handle customised data conversions here.
8.Replace 'TCODE' in the template program with the transaction code you intend to process in this BDC.
9.Please carry out further syntax check and resolve the related issues.
This program will provide for input help to select upload file from local machine. The file needs to be in Tab delimited format and is assumed to have first row as column headers .
On successful creation of session you will be prompted with a Information popup giving the name of session ,and will take you to the SM35 transaction to process your session. -
How to populate data from table to form in popup
Hi
I am using jdev 11.1.2.1.0
I created a table by dragging and doping a view object data control.
I take a pop up which invoke on click of a button
I drop a dailog box in popup and in dialog box i drop the same view object data control.
Now I am selecting the row of table and clicking on button to invoke popup it display the form populated by selected row of table only for the first time
Again when I am selecting another row the popup does not displaying selected row.
I displays only that row which i select first time.
Please solve this problem
Thanksdid you set the Content Delivery for the popup to lazyUnchached?
-
Select record from database table
how to select a record from data-base table for current month in module-pool, i.e if current month is august then records selected should between 1/08/10 to 31/08/10.
And, i also want to select records for last month i.e if current month is august then records selected should be between 1/07/10 to 31/07/10.
And one thing more, it should work for every scenario. Like for months are changing then it should work according to that.
Example: If month changes to October then current month ll be October and last month ll become September.
Plz help me out.
Moderator message: you chose a better forum this time, but the question is still too basic to be asked here, please (re)search yourself first, these forums are not catering to beginners.
locked by: Thomas Zloch on Aug 8, 2010 9:41 PMHi Nishant,
You can use the option <b>ORDER BY </b> in your SELECT clause.
This is the SAP Documentation for <b>ORDER BY </b> option.
<i>Variant 1</i>
<b>...ORDER BY PRIMARY KEY</b>
<b>Effect</b>
Sorts the selected lines in ascending order by the primary key of the database table. This variant is only permitted for SELECT * ....
<i>Notes</i>
Since views do not have a primary key, specifying ORDER BY PRIMARY KEY only makes sense with database tables. If, however, you do specify ORDER BY PRIMARY KEY with a view, all fields of the view are sorted in ascending order.
<i>Variant 2</i>
<b>ORDER BY f1 ... fn</b>
<i>Effect</i>
Sorts the selected records in ascending order by the specified column references f1 ... fn. If a list is also specified in the SELECT clause, the column references f1, ..., fn must appear in this list.
By supplementing the statement with DESCENDING, you can sort in descending order using any of the fields f1, ..., fn.
The default sort sequence is ascending order, but you can make this explicit by adding the addition ASCENDING.
Consider this code this will select the latest 10 records form DB table(Note can use <b>Variant 2</b> for DB tables also.
REPORT zarun_1.
DATA : it_mara TYPE STANDARD TABLE OF mara WITH HEADER LINE.
START-OF-SELECTION.
SELECT * FROM mara
INTO TABLE it_mara
<b>UP TO 10 ROWS "No of rows you need(give 1 here)
ORDER BY matnr DESCENDING. "Specify the Key Fields here.</b>
LOOP AT it_mara.
WRITE : / it_mara-matnr,
it_mara-mtart.
ENDLOOP.
Regards,
Arun Sambargi.
Message was edited by: Arun Sambargi -
Download only selected record from ALV
Hi
I want to download only selected records from ALV output with button.
i hav to fix the button on ALV screen using &ZDL whenever user presses the button record should be downloaded.
Pl with coding
its very very urgent.Hi ,
i dont have the exact code which suits to your requirement
but declare the internal table
like
data: begin of itab occurs 0,
check type c,
fields
end of itab.
while filling the field catalog
fieldcatalog-checkbox = 'X'
for this check field.
and display the grid
now write this subroutine
*& Form USER_COMMAND
Called from within the ALV processes. Currently, '&IC1' is used
to process the hotspot and display the document 'picked' by the
user.
PV_UCOMM contains the sy-ucomm from ALV
SELFIELD is a structure that contains all the data required to
process a user selection. The following is an example
of the SELFIELD structure and sample values:
FORM USER_COMMAND USING PV_UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CASE PV_UCOMM.
WHEN '&IC1'.
loop at itab where check = 'X'.
append all these records to another internal table itab1
endloop.
call function gui_download.
pass the internal table itab1 in the tables statement
and also you have to give the file path that may be static or dynamic
if dynamic you have to call the function module
f4_filename
and get the filename and pass the same value to gui_download
that will be download to the above said path
endcase.
end form.
reward points if helpful,
thanks & regards,
venkatesh -
Hi experts,
I have a requiement to fulfill, I have a tabular (multiple record) form where i want the user to pick the selected record using check box (property database item--> No) and only selected records will be shown on the report upon pressing a button,
e.g employees table where user want to print only the selected employees data on the report.
All ideas will be very much appreciated, (as i am trying to make a for loop for this on the button)
(unfortunately i am using form 6i).
RegardsHi guys,
sorry for adding new comment i know problem has been resolved. But i want to add something.
Problem can also bhi solved by creating the LEXICAL PARAMETER. So, in this solution no need to create table.
for example.
DECLARE
vParameter VARCHAR2(1024);
BEGIN
GO_BLOCK('BLOCK_NAME');
FIRST_RECORD;
vParameter:='AND report_field_name IN (';
LOOP
IF CHECK_BOX = 'Y' THEN
-- If the value in number
vParameter:=vParameter||:BLOCK.RECORD_ID||','; -- or any id you are using in form
-- If the value in characters
vParameter:=vParameter||'''||:BLOCK.RECORD_ID||'''','; -- or any id you are using in form
END IF;
EXIT WHEN :SYSTEM.LAST_RECORD = 'TRUE';
END LOOP;
vParameter:=SUBSTR(vParameter,1,LENGTH(vParameter)-1)||')';
END;
and pass this variable as parameter in report and use in report's query like this
report_query
¶meter_name
Regards,
Edited by: Ammad10786 on Mar 9, 2010 12:41 PM -
hi,iam using jdev 11.1.1.7
my requirement as follows i have panel tabbed with list and detail tab ,list tab contain table and details tab contain form(related to table),when ever i selected a row in the Table of list tab ..i.e navigate to details tab and display the selected record in form...how to achieve this???????????Use a generic selection listener where you first select the row, then navigate to the detail tab.
If you use the same vo for the table and the detail the framework does the rest for you as the detail does the selected row.
A sample for a generic selection listener can be found here http://www.oracle.com/technetwork/developer-tools/adf/learnmore/23-generic-table-selection-listener-169162.pdf
Timo
Maybe you are looking for
-
I have to reinstall Mail as it's not working well. How can I make a back up of my emails so as not to lose them all?
-
Creating a pop-up in Acrobat X that is triggered when the PDF is opened.
Hello all, I am wanting to create a pop-up that is triggered when the PDF is opened. The problem I am facing is that our customers are filling out the packet , but are not using the purple "Submit" button located at the top of the page to submit the
-
Data exist in DeltaQueue but No data is extracted
Hi, I use the bapi BAPI_SALESORDER_CHANGE in R3, in order to change some fields of order. When I run this BAPI over orders, and do the changes, all of the infected orders, are moved to the delta queue, that's mean that I can see them in RSA7. But BW
-
I pre-ordered this concert and now when I hook up my ipod and go to itunes..it is not in my library? how do i get this on my ipod? really confusing..I paid for it via paypal.
-
Fmt:formatNumber when value is blank
<c:catch var="formatError"> <fmt:formatNumber value="${row.pay}" type="currency" currencySymbol="" var="payment"/> </c:catch> when the ${row.pay} is "", looks like the formatNumber does not throw the formatError nor creates the variable payment with