Adobe form displaying data of previous selected records

Dear All,
I have created a wd component consisting of 2 views.
In the first view i am displaying an ALV. When i select a record and click on the alv button, the second view
gets called which contains an Adobe Form showing the data.
The problem i am facing is that the record which gets displayed in the adobe form is the one previous selected record and not the current record which i select.
Kindly give your valuable suggestions .
Regards,
Niti

Hi ,
Adobe form is just an external media in your case , it has nothing to do with your data.
Check what data is getting passed to adobe form via debuging .
check if your getting the selected element .
You can also post your code here if possible.
Regards
Kuldeep

Similar Messages

Adobe Form - data from previous selected record is shown.

Dear All,
i have created a wd component consisting of two views.
in the first view i am displaying an alv which is bound to an internal table.
on selecting a record and clicking a button the second view gets called containing an interactive form (adobe form)
have provided a native wd submit button in the form which again calls the first view.
The first time when i run the program it works fine.
after clicking on submit the first view gets called again.
now if i select another record, the adobe form gets the previous value even though in the context it shows me the current record.
it always displays the record one previous to the current records selected.
kindly give ur valuable suggestions.
Regards,
Niti

Keep in mind I'm not using a textfield component, just a
dynamic text box with the variable 'name' applied to it. Also,
doesn't it matter that send_lv.fname was created within the
LoadVars() method?
At any rate, I tried doing what you said with the following
code:
name = send_lv.fname+""+send_lv.lname;
However, what i end up getting in the textbox is
'undefinedundefined'. I can't apply variables to the text fields
instead because then it won't process the data to my php script.
Any other suggestions?

WD ABAP iview for Adobe Forms showing data of previous PERNR

Hi Experts,
We have developed adobe forms using HCM P&F functionality. We copied standard delivered WD ABAP Iview "Termination" multiple times for the use in developed forms. The Portal IDs are attached to the employee's IT 0105-Subtype 0001 Syname.
We added the parameters in iview:
Application Parameter: GET_PERNR=X&PERNR_MEM_ID=ESS01&Process=ZXXX_XXX_FORM
Problem:
The Portal id is assigned to PERNR in IT 0105 - Subtype 0001 correctly and when we execute the Form Service link is clicked on Portal it shows the correct default data in Adobe form.
But if we remove the Portal id from 1 PERNR and assigned to another PERNR then Adobe Form still shows the data from previous PERNR.
We are unable to figure out the problem as the new Portal id is attached correctly and other WD Java iviews are showing correct data for existing PERNR but only Adobe forms are showing data from old PERNR assignment.
Please advise.
Sunny

Hi Siddharth,
We have already done a number of action to clear the cache such as:
- Set the 2 properties of the iview
a. Cache Level ---> None
b. Cache Validity Period --->-1
- Cleared Portal Run Time Cache
- Clear DB cache
- UME cache (In case you are changing users frequently )- System Administration -> System Configuration -> UME Configuration -> Support -> Invalidate cluster wide cache
- Clear the browser cache --> Most imp - Browser settings -> tools -> Internet Optionsu2026 -> Temporary Internet Files -> Delete Files.
The actions are already done but the problem is still there.
I read some blog on SAP INDX tabel which records the Portal IDs when user logged in and Iview Properties "PERNR_MEM_ID=ESS01" reads this table . I am not sure that if this is the problem.
Please help.
thanks
Sunny

Adobe form getting data from BADI?

Hi,
I have a webdynpro component which calls an Adobe form which gets data from BADI i.e. prepoulate the values after interacting with the BADI's.How to find the BADI's name ?how it triggers that particular BADI.where it is calling exit handler?
please reply me soon..
Regards,
Lakshmi.

>
Lakshmi Atukury wrote:
> Hi,
> adobe form getting data from BADI only,through the BADI interface method Initialize.
> but technically i would like to know from where it is calling BADI and how it interacts with Adobe form.How the process goes?
>
> Regards,
> Lakshmi.
That's why we have debuggers. I suggest that you start debugging through the application and see what it is going on. I would find it difficult to see how the Form itself calls a BADI (since a BADI is an exit in ABAP coding). I would think that the BADI would be called via a service class of the Web Dynpro or the Web Dynpro is calling a function module to process the form. I would start back with the Web Dynpro and see how it is even initializing the form itself.

Can my Adobe form push data to Salesforce?

Can my Adobe form push data to Salesforce? I am currently embedding the form code in my web page and would like to have the data pushed to Salesforce on submit. Currently I save a .csv file, but would like to automate the process.
Thanks

Sorry we do not support this workflow.
You can add the idea here :
http://forums.adobe.com/community/formscentral?view=idea
Gen

Adobe forms: Displaying work area data in different windows

Hi,
I have a requirement of showing work area data in different windows i.e work area which has sent from program needs to come in different windows of the form. I have created a smartform which will perfectly doing the above logic. The above work area also contains amount fields. I am also passing language 'English' or 'French', based on this i am displaying some texts also.
But Client wants to see the same requirement in Adobe forms. Ao i am new to Adobe forms, I need some help for performing the above scenario. I am doing my research on this. But i want to know the steps which will not reduce the performance.
In smartform, first window contains personnel no from work area and the second window contains address from work area. Then i have created a template with employee premium amount column, company premium amount column and total of that, all these from work area. So work area will contain only one row which i have to show in different window and on template.
In Adobe forms, How can i do the same this which i have done in smart forms.
Please suggest me any one in doing this. I appreciate your answers.
Thanks,
s.vikgnesh

Hi,
Yes as Santoosh said there is no such wiondow option in Adobe forms.
But if you use webdynpro java/Abap we can acheive this.
think something like this below, if it works.
have 2 views 1st for the adobe form, 2nd view in a new window for the work area screen.
in the adobe view have a button for the work area and respective event handler.
in the event handler call this window, and then reload the same adobe form.
if from the work area form if you need value to be passed to this adobe form. have a event handler for this.
when purpose is done, close that window and set value to the required context field on the form. and reload that adobe form.
this is a fuzzy process and time consuming, unless business has no other option we dont go this approach.
but for sure this works, we did the same for a EHS process.
Cheers,
Sai

Barcode printing in ADOBE form when data and Barcode are in different pages

How to send raw value to the Barcode when data values are availabe in Master page and Barcode in the Design page.
Barcode needs to print once on the first page, so it is on Designer page.
Values needed for display of barcode is avilabe on Master page.
How to communicate data between Master page and Designer Page in ADOBE Form?

Hi,
Declare a variable of character type and concatenate DTAP and Bar code value into that variable.
Later print that in required bar code format.
Try this.

Non-interactive adobe form display

Hi all,
I'd like to call an adobe form via WDJ to a non-SAP portal. I believe I need to do the following:
-create web dynpro application and define context.
-create form.
-create webdynpro controller to enable display form.
Excuse the basic nature of question; I'm a HR consultant. If anyone could clarify or confirm my understanding, it would be greatly appreciated.

Hi,
Pre-requisited to work with Adobe Forms:
-Check Adobe Live cycle designer is installed in your system.
-Check whether ADS(Adobe Document Services) is configured properly and running on the SAP WebAs j2ee engine.
- Acrobat Reader to view the Form.
-Create a Webdynpro Project or Development Component.
-Insert Interactive Form UI element in View.
-Create Context Node of Cardinality 1..1, and below it create nodes and attributes to be      used in Adobe Form
-Create Context Attribute under the root context node of type binary.
Example Context Design
Context
   DataSource(1..1)
    Student(1..1)
      Name(Type:String)
      Age(Type:Int)
PdfSrc(Type:binary)
-Bind the Datasource node to the Datasource property of Interactive Form UI element.
-Select the Display Type property as Native
                   ActiveX - can be rendered only if ActiveX Component Framework is installed in the client
                   Native - can be rendered if ZCI(Zero Client Installation) is installed in the server side
-Bind pdfsrc attribute to pdfsource property of interactive form UI element.
-Set Height and Width property for the form.
-In Outline Window right click the interactive form UI element and select Edit
Adobe Live cycle designer opens and Form layout can be designed.
Build and Deploy the Application to view the Adobe form.
Regards,
Bala Baskaran.S

How can I read and display data with OR without recording at the same time?

Hi all,
This forum has been of much help to me, but I have a rather specific question I can't seem to find an answer to. I am new to LabView, educating myself with tutorials, trial and error, and this forum.
Attached is what I have so far. I would like to read data (three voltages) and write it to an excel file. As written below, it will do nothing until I click the "Record" button, when it then takes data, displays it on the gauges and waveform chart, and writes it to a file. What I would like it to do is display the data at all times, and record when I click the record button (while still displaying data being read). I have tried to do this by moving the DAQ Assistant VI, gauges, and waveform graph outside of the loops, but when I do this, it will read until I press record, and then it simply records whatever value it's stuck on. Sorry for the long post, thanks for any help.
--Nathan
Attachments:
Record and Write to File 2.vi ‏332 KB

Sorry, I don't have any DAQ installed, so I won't comment on the DAQ parts.
First of all, Your VI will do nothing until you (1) first set the record button to ON and (2) press the start button in the tool bar. It almost seems that you are using the "continuous run" button. (Don't! That's not its purpose. Basically, it automatically restarts the program whenever it finishes). A toplevel VI should never stop during normal operation, so place a big while loop around all code and create a wait state that does nothing until you tell it to acquire.
You don't need the inner while loop, simply place your code inside the big while loop (and accumulate your array data in an initialized shift register if really needed. Currently you do at the inner loop boundary for some reason). You have a big problem that the array can grow without bounds unless you clear the accumulated data once in a while or place it in a FIFO buffer of limited size. If you let ot grow forever like you do now, the program might run out of resources at one point in the future.
Since you are appending to your file, maybe yo don't need any shift register, just use the data points of the current iteration. Place your save operations in a case structure and keep appending the new data to your file only if the case is true.
It is also very inefficient to use highlevel file IO here,because each instance opens and closes the file. I recommend to open the file once outside the loop, then use low level IO to append, and close the file once the big loop is done.
LabVIEW Champion . Do more with less code and in less time .

Access the adobe form pdf data in abap or java programs

Hi,
We created an adobe form, with few text boxes, and emailed to user for filing his data into the pdf file.
He filled the text boxes and saved the pdf, and sent back the pdf file by mail.
Now our requirement is:
we need to read the values entered by the user in pdf and update in certain ztables using abap or java.
case 1: using abap
How can abap program read the entries/values in pdf.
is there any doc/blog that shows how to access the adobe form data in abap.
do we need to use/install any software for this.
case 2: using java
Is it possible to read/retrive the adobe form data into java. once the data is into java program, i can utilise the data for several puposes.

using ABAP:
check the program: FP_PDF_TEST_03
This program reads the data from Adobe into XML format.
After this you have to read the data from XML format into ABAP(hope you know how to convert XML to ABAP or simply google it).
Thanks,
Chandra

Convert Adobe Form (with data) to Microsoft Word Document

Adobe Acrobat 8.0 Standard
Windows XP Professional SP2
Microsoft Word 2003 SP3
I am attempting to convert an Adobe PDF Form (with data included) to a Microsoft Word document.
When I use the menu to attempt this, I get a Word document containing only the form fields.
I want to be able to grab all the text from the document, as these forms were used to fill in information for Job Descriptions, and I want to submit the text to job boards (without having to retype anything).
What are my options for obtaining this information?

Bill:
Thank you for all of your help. I do not have the program in front of me, so I don't have a means of independently verifying this, until I go see the user tomorrow when he returns to the office ...
Just to confirm, a fillable PDF is different from a standard PDF, as it stores the form fields in a special way, likewise, the data is stored in a special way. This is actually a quite useful feature, for compiling data, if you use the form multiple times.
A standard export of a fillable PDF exports only the fields.
To get the data, I would have to choose to save form data.
To get the fields and the data, I have to print it using a PDF printer to create a new PDF document. Once I create this new PDF document, I can then export to Word as desired.
If I want ONLY form fields: (one-step process)
Export > Microsoft Word > %filename%.DOC
If I want ONLY form data:(one-step process)
File > Save FORM DATA > FDF file format > %filename%.FDF
If I want both the form and the data: (two-step process)
File > Print to PDF > Save as %filename%.PDF
Open %filename%.PDF > Export > Word Document
Is this the process? Pardon my confusion, but I am a newbie, and I do not have the program to test with.
Thanks for your help, kind sir.

Blank adobe form displayed in web dynpro application

Hi,
I have created an Interactive Adobe form using web dynpro Java. When I run the form (in IE), a blank page is displayed.
If I keep the Adobe reader open and run the form on IE, the form is opened in reader and it's working.
When I access the same form on a different system, there is no problem.
Does this have anything to do with the IE settings or Adobe Reader version/ updates.
I have checked the adobe reader version and it's the same on both the systems.
Version:
Adobe Reader Version : 8.1.2.
Adobe Designer 7.1
SAP NW 2004s - SP 15
Thank you,
Vasu

Not sure what the problem could be, here are some suggessionsu2026
Check whether you have enabled the option Display PDF in browser in the Adobe Reader.
I should be under: Edit > Preference > Internet
Also, in your Web Dynpro Application, try to set the u201CdisplayTypeu201D property of your Interactive form to ActiveX
Else, just try upgrading your Adobe Reader to latest version!
Hope this helps,
Harman

Web dynpro Adobe Form Display In Portal

Hi,
I have a Web dynpro Abap application which triggers a adobe form, which is displayed fine when previwed from Web dynpro Abap, but the same application when inegrated in portal it is not displaying the adobe form in portal.
Any help would be greatly appreciated.
Thanks in advance.
Regards
G Suraj

Hi Suraj,
As you have written that you are using ADOBE Form, So you check with your Portal Admin that
ADS services are configured in Portal or not ??
Regards,
Piyush

Adobe form displayed is different from that in Designer

Hello All,
Has anyone come across this situation before ? I have created a simple adobe form in NDS (Designer) but the deployed form that appears in IE is different. Any feedback or suggestions will be appreciated. Thank you.
from
Kwok Wei

Hello All,
I think I may have just found a way to save the form. It seems that I need to select Reload + Rebuild for the changes to be updated. I have been all this time been selecting on "save all metadata" and then "deploy new archive and run".
Here is my NDS version number :
Version: 2.0.12
Build id: 200505230145
Do you think its a bug ?
from
Kwok Wei

HCM Form displays data from different client

We are implementing HCM in ECC 6.0 environment with Adobe forms. When we execute Adobe form it shows information from our ER8 206 client but when it displays subsequent client it makes a switch to ER8 102 client. All our iViews are pointing to SAP_R3 alias. So wondering where we need to maintain client information or is there a way I can debug. I tried to use HTTP Watch but did not help.
Thanks in advance for your help.
Regards
Jitendra

Have a look at the JCos of the System object. Login to portal with user who has an administrator role then navigate to Content Admin --> WebDynpro --> Maintain JCo connections. Verify where the JCos pointing to 102 or 206?
Also check the system object properties, what is the value of client field for "Connector" property.
Chintan

Adobe form displaying data of previous selected records

Similar Messages

Maybe you are looking for