Sysdate + 12 month add in query

hi all
i have a problem i want to write query wich give present months and next 12 month more in oracle
suppose present month jan 2012
then result get
jan 2012
feb 2012
mar 2012
apr 2012
may 2012
june 2012
july 2012 and so on.

paritosh wrote:
hi all
i have a problem i want to write query wich give present months and next 12 month more in oracle
suppose present month jan 2012
then result get
jan 2012
feb 2012
mar 2012
apr 2012
may 2012
june 2012
july 2012 and so on.
09:06:08 SQL> select add_months(sysdate,12) from dual;
ADD_MONTHS(SYSDATE,
2013-03-27 09:06:39

Similar Messages

My Menu - Add a Query Print Layout to the Report Folder

This is a newb question. I can easily add a Query or form or most anything else to the Folders under My Menus ... But how can I add a specific Print Query Layout to the Reports folder un My Menu?
I know it is simple but I can not find the steps in the documentation
Thanks in advance!!!
Dana

Kapil
I tried that, but it adds the Query not the QPLD to the menu.
I had figured that I could go the the QPLD memu and add the Report, but that adds the Query Print Layout Menu with all the reports.
I feel like I am missing something very obvious here!!!
Thanks for your quick response!!
Dana

Is it possible in PLD to add sql query ?

Hi
In Order report in PLD , i need to add the total amount of down payment . it doesn't exists in Order , so i need to do a sql query to display this amount .
is it possible to add sql query in pld formula ?
thanks ,
regards
laurent

Hi,
You cannot add sql query in PLD.If you need SQL query use Crystal report or on the document add UDF and try by adding FMS and then selecting UDF in pld
Thanks,
Neetu

Monthly Sales Order query Doc Status problem

Hi Experts,
I am having an problem while making a total monthly sales order query in which I am not getting the document status which are Open - Printed. Also note that these document which are open printed are not having any target document.
SELECT T0.[DocStatus],T1.[TargetType],T0.[CANCELED],T0.[CardCode], T0.[CardName], T0.[NumAtCard], T5.[SeriesName], T0.[DocNum], T0.[DocDate], T0.[DocDueDate], T0.[DocTotal],T0.[Max1099]'Total Before Discount',T0.[TotalExpns],T4.[descript]'Territory',T2.[SlpName]'Employee Name'
,T0.[discsum] FROM ORDR T0 ,RDR1 T1,OSLP T2,OCRD T3,OTER T4,NNM1 T5 where T0.DocEntry = T1.DocEntry AND T0.SlpCode = T2.SlpCode AND T0.CardCode = T3.CardCode
AND T3.Territory = T4.territryID AND T0.Series = T5.Series and T0.[CANCELED]='N' and T1.[TargetType] is not null
My mission for the above query is to have Total Monthly Sales Orders with value exluding the cancelled and closed sales sales ( close here means - which are manually done by right click on sales order screen and selecting Close )
Please guied how to solve this issue because in the back end for Sales Order which have turned to deleivery are showing doc status as closed and the sales order which are manually closed are also showing doc status as closed. How to diffrentiate between them.
Waiting for a positve feedback.
Regards,
Rahul

Try this one:
SELECT DISTINCT T0.[DocStatus],T0.[CardCode], T0.[CardName], T0.[NumAtCard], T5.[SeriesName],
T0.[DocNum], T0.[DocDate], T0.[DocDueDate], T0.[DocTotal],T0.[Max1099]'Total Before Discount',
T0.[TotalExpns],T4.[descript]'Territory',T2.[SlpName]'Employee Name',T0.[discsum]
FROM DBO.ORDR T0
INNER JOIN DBO.RDR1 T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN DBO.OSLP T2 ON T0.SlpCode = T2.SlpCode
INNER JOIN DBO.OCRD T3 ON T0.CardCode = T3.CardCode
INNER JOIN DBO.OTER T4 ON T3.Territory = T4.territryID
INNER JOIN DBO.NNM1 T5 ON T0.Series = T5.Series
where T0.[CANCELED]='N' and T1.[TargetType] != -1
Thanks,
Gordon

Currency conversion by Calendar month in the query?

Hellow...
Users want DB currencies when executing query at first. And then want to change currency conversion by Calendar month in the query, if navigating by target currency. Tried as created TEST Currency Translation Key. Database currency is different currencies.
Appreciate your help.
Don.

Hi,
Create Currency conversion type using Trans: RRC1.
1.Specify your Exchange rate type.
2.Dynamic Exchange rate type
3.Source curency from data rec.
4.Fixed currency say USD.
5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
Secondly In the key figure field to be converted in the query, select properties - select the currency conversion key name .
Thanks,
Nagesh
Sony Singapore

Add user query to cockpit

Dear All,
We are currently using SAP88 PL21. Is there a way we can add user query to cockpit? For SAP screen that we can see from main menu, I use drag and drop to add them to common function. But for user query, I didn't find any way to add to cockpit. Thanks.
Regards,
Yuka

Hi Yuka,
1.Goto Tools --> Cockpit -->Enable my cockpit
2.Administration -->System Initialization>General Setting -->Cockpit(Select Cockpit option)
3.Make a new Dashboard download Dashboard Design (Xcelsius) from SAP portal
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6091ffdd-e1ad-2d10-359f-d644ff7eaa4e
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6091ffdd-e1ad-2d10-359f-d644ff7eaa4e?QuickLink=index&overridelayout=true
4. you should download Dashboard packaging wizard from SAP portal for make new package(zip file) in SAP .
[File Deleted Oct 2013]
after download tool goto -->Tools -->Dashboard packing wizard(Select) and use or select your xcelsius file to make new package
5.there are also same sample package in the portal so you can use directly import zip file from
Administration -->Setup -->General -->Dashboard manager
6.After import dashboard by 5 step ,select widget gallery in Cockpit tab(Modules,Cockpit and Drag & relate option) then select last form dashboard ,hold and drag on the main windows center.
7.select setting option then it will list you all dashboard package which was import in 5 step.
8.Now selected dashboard which you want to show and select OK.
9.you also need IIS installation in your system.
Thanks
Srujal Patel

Date to Month Conversion at Query Level.

Hi,
I have Net due date in the Info provider.
At query level i have to create a restricted keyfigure based on Net Due Month.
Is there any way i can calculate Net due month at runtime and then create the restricted keyfigure using the net due month instead of using net due date directly(linke 01-10-2010 to 31 -10-2010 for october 2010).
Thanks and Regards,
MuraliManohar.

Hi,
Is there any way i can calculate Net due month at runtime and then create the restricted keyfigure using the net due month instead of using net due date directly(linke 01-10-2010 to 31 -10-2010 for october 2010).
you can calculate , but as he said you can add in cube , may be for cal month you are taking som eother date field.
in this case write one customer exist code .
create one varaibel on netdue date with customer not ready input (if user wants to enter input then ct=reate user entry varaible with reday input by using customer exit).
in routine wriet the code as when that varaible .
l_s_range - high , low and give then take the month form that date
like netdue date +0(6)-- gives month and year
netdue date +0(2)-- gives month
then rtestrict that variable with your keyfigure.
Thanks & Regards,
sathish

BPS_WB-Can i add a query to a Web interface tabpage?

Dear experts,
In a BPS web interface application, i have already a tab page which allows users to input their data. Now i would like to add a second tabpage which allows to display the existing data.
Is that possible to link a BEX query to a Tabpage BPS web interface application? I would like that the query is launched and the result is displayed each time an user click on this tabpage.
Thanks in advance.

Include your query in a web template and follow the approach given in the link http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a861d590-0201-0010-248a-fc70d8d29f26
Edited by: Deepti Maru on Nov 30, 2010 10:24 AM

Unable to view the Calendar Year/Month in the Query

Hi All,
We are having a standard query on Customer InfoCube 0sd_c01_q0003.
I was able to get the data. But I am unable to view the Calendar Year/month. In that place I am getting '#'.
I am able to view the details in the InfoCube. There aren't any errors while executing the error.
Regards
YJ

hi,
U r Problem is not clear...if u r getting # for characteristic values means..u don't have data in Infoprovider...try to view data in InfoProvider with the same selections that u r executing the Query with.
thnaks

Not to able add sql query in the item source

Hi,
I am getting this error when i am trying to add the sql query in the item source
ORA-20505: Error in DML: p_rowid=3206911131098131, p_alt_rowid=ID, p_rowid2=, p_alt_rowid2=. ORA-01461: can bind a LONG value only for insert into a LONG column
SELECT
"UCL"
FROM
SELECT
TRUNC((
(SUM("EV FINAL" / 100) / COUNT("Object_Name") )
+
3 *
SQRT
(SUM("EV FINAL" / 100) * SUM("EV FINAL" / 100) ) / COUNT("Object_Name") -
(SUM("EV FINAL" / 100) / COUNT("Object_Name")) * (SUM("EV FINAL" / 100) / COUNT("Object_Name"))
),3) "UCL"
FROM
SELECT
Pro.Project_Name "Project Name",
POBJ.NAME "Object_Name",
TRUNC((
( ( NVL(AEV."Total Actual",0) - (NVL( (NVL( (MAX(X."Incoming-Doc") / 100),0) * NVL(ID."INCOMMING_DOC",0) ) ,0 ) +
NVL( (NVL( (MAX(X."Design") / 100),0) * NVL(D."DESIGN",0) ), 0 ) +
NVL( (NVL( (MAX(X."Build") / 100) ,0) * NVL(B."BUILD",0) ),0 ) +
NVL( (NVL( (MAX(X."Testing") / 100),0) * NVL(T."TESTING",0) ),0 ) +
NVL( (NVL( (MAX(X."Release") / 100),0) * NVL(R."RELEASE",0) ),0 ) ) )
DECODE(
(NVL( (NVL( (MAX(X."Incoming-Doc") / 100),0) * NVL(ID."INCOMMING_DOC",0) ) ,0 ) +
NVL( (NVL( (MAX(X."Design") / 100),0) * NVL(D."DESIGN",0) ), 0 ) +
NVL( (NVL( (MAX(X."Build") / 100) ,0) * NVL(B."BUILD",0) ),0 ) +
NVL( (NVL( (MAX(X."Testing") / 100),0) * NVL(T."TESTING",0) ),0 ) +
NVL( (NVL( (MAX(X."Release") / 100),0) * NVL(R."RELEASE",0) ),0 ) ),0,NULL,
(NVL( (NVL( (MAX(X."Incoming-Doc") / 100),0) * NVL(ID."INCOMMING_DOC",0) ) ,0 ) +
NVL( (NVL( (MAX(X."Design") / 100),0) * NVL(D."DESIGN",0) ), 0 ) +
NVL( (NVL( (MAX(X."Build") / 100) ,0) * NVL(B."BUILD",0) ),0 ) +
NVL( (NVL( (MAX(X."Testing") / 100),0) * NVL(T."TESTING",0) ),0 ) +
NVL( (NVL( (MAX(X."Release") / 100),0) * NVL(R."RELEASE",0) ),0 ) ) ) ) * 100),2)
|| '%' "EV_INITIAL",
TRUNC((
( (NVL(AEV."Total Actual",0) - ( NVL( (NVL( (MAX(X."Incoming-Doc") / 100),0) * NVL(IDR."INCOMMING_DOC_REPLAN",0) ),0) +
NVL( (NVL( (MAX(X."Design") / 100),0) * NVL(DR."DESIGN_REPLAN",0)),0) +
NVL( (NVL( (MAX(X."Build")/100),0) * NVL(BR."BUILD_REPLAN",0)),0) +
NVL( (NVL( (MAX(X."Testing") / 100),0) * NVL(TR."TESTING_REPLAN",0)),0) +
NVL( (NVL( (MAX(X."Release")/100),0) * NVL(RR."RELEASE_REPLAN",0)),0) ) )
DECODE(
( NVL( (NVL( (MAX(X."Incoming-Doc") / 100),0) * NVL(IDR."INCOMMING_DOC_REPLAN",0) ),0) +
NVL( (NVL( (MAX(X."Design") / 100),0) * NVL(DR."DESIGN_REPLAN",0)),0) +
NVL( (NVL( (MAX(X."Build")/100),0) * NVL(BR."BUILD_REPLAN",0)),0) +
NVL( (NVL( (MAX(X."Testing") / 100),0) * NVL(TR."TESTING_REPLAN",0)),0) +
NVL( (NVL( (MAX(X."Release")/100),0) * NVL(RR."RELEASE_REPLAN",0)),0) ) ,0,NULL,
( NVL( (NVL( (MAX(X."Incoming-Doc") / 100),0) * NVL(IDR."INCOMMING_DOC_REPLAN",0) ),0) +
NVL( (NVL( (MAX(X."Design") / 100),0) * NVL(DR."DESIGN_REPLAN",0)),0) +
NVL( (NVL( (MAX(X."Build")/100),0) * NVL(BR."BUILD_REPLAN",0)),0) +
NVL( (NVL( (MAX(X."Testing") / 100),0) * NVL(TR."TESTING_REPLAN",0)),0) +
NVL( (NVL( (MAX(X."Release")/100),0) * NVL(RR."RELEASE_REPLAN",0)),0) ) ) ) * 100),2) "EV FINAL",
TRUNC(BRV."RSV",2) "Revised SV"
FROM
PROJECTS PRO,
PROJECT_OBJECTS POBJ,
INITIAL_EFFORT IE,
SCHEDULE_VARIANCES SV,
INITIAL_EFFORT_VIEW IEV,
INCOMMING_DOC ID,
DESIGN D,
BUILD B,
TESTING T,
RELEASE R,
INCOMMING_DOC_REPLAN IDR,
DESIGN_REPLAN DR,
BUILD_REPLAN BR,
TESTING_REPLAN TR,
RELEASE_REPLAN RR,
ACTUAL_EFFORT_VIEW AEV,
REPLAN_INITIAL_EFFORT_VIEW RIEV,
BSV_RSV_VIEW BRV,
SELECT
distinct
pro.project_name "Project Name",
pobj.name "Object Name",
PRO.ID "PRO_ID",
POBJ.ID "POBJ_ID",
CASE
WHEN
ts.status in ('CLOSE','CLOSED','Closed') AND
tsk.name in ('Incomming-Doc Review','Incoming Doc- Review',
'Incoming Doc- Review','FDD - Review') THEN
TO_CHAR('100')
WHEN
upper(ts.status) like upper('ACCEPTED') AND
tsk.name in ('Incomming-Doc Review','Incoming Doc- Review',
'Incoming Doc- Review','FDD - Review') THEN
TO_CHAR('75')
WHEN
ts.status IN ('RIP','WIP','REJECTED','Rejected') AND
tsk.name in ('Incomming-Doc Review','Incoming Doc- Review',
'Incoming Doc- Review','FDD - Review') THEN
TO_CHAR('50')
WHEN
POBJ.ID IN (SELECT POBJ.ID FROM projects pro,project_objects pobj,task tsk,skip_phase sp,employees
emp,employee_project_pairs epp
WHERE pobj.pro_id = pro.id and epp.pro_id = pro.id AND sp.tas_id = tsk.id and
pobj.id = sp.OBJ_ID and pro.id = sp.pro_id
and tsk.name in ('Incomming-Doc Review','Incoming Doc- Review',
'Incoming Doc- Review','FDD - Review')
AND PRO.ID = :p2_projects ) THEN
TO_CHAR('100')
END "Incoming-Doc",
CASE
WHEN
ts.status in ('CLOSE','CLOSED','Closed') AND
tsk.name in ('Design Review','Design - Review','TDD - Review') THEN
TO_CHAR('100')
WHEN
UPPER(ts.status) LIKE UPPER('ACCEPTED') AND
tsk.name in ('Design Review','Design - Review','TDD - Review') THEN
TO_CHAR('75')
WHEN
ts.status IN ('RIP','WIP','REJECTED','Rejected') AND
tsk.name in ('Design Review','Design - Review','TDD - Review')
THEN
TO_CHAR('50')
WHEN
POBJ.ID IN (SELECT POBJ.ID FROM projects pro,project_objects pobj,task tsk,skip_phase sp,employees
emp,employee_project_pairs epp
WHERE pobj.pro_id = pro.id and epp.pro_id = pro.id AND sp.tas_id = tsk.id and
pobj.id = sp.OBJ_ID and pro.id = sp.pro_id
and tsk.name in ('Design Review','Design - Review','TDD - Review')
AND PRO.ID = :p2_projects ) THEN
TO_CHAR('100')
END "Design",
CASE
WHEN
ts.status in ('CLOSE','CLOSED','Closed') AND
tsk.name in ('Build Review','Build - Review','Code - Review','Code') THEN
TO_CHAR('100')
WHEN
UPPER(ts.status) LIKE UPPER('ACCEPTED') AND
tsk.name in ('Build Review','Build - Review','Code - Review','Code') THEN
TO_CHAR('75')
WHEN
ts.status IN ('RIP','WIP','REJECTED','Rejected') AND
tsk.name in ('Build Review','Build - Review','Code - Review','Code') THEN
TO_CHAR('50')
WHEN
POBJ.ID IN (SELECT POBJ.ID FROM projects pro,project_objects pobj,task tsk,skip_phase sp,employees
emp,employee_project_pairs epp
WHERE pobj.pro_id = pro.id and epp.pro_id = pro.id AND sp.tas_id = tsk.id and
pobj.id = sp.OBJ_ID and pro.id = sp.pro_id
and tsk.name in ('Build Review','Build - Review','Code - Review','Code')
AND PRO.ID = :p2_projects ) THEN
TO_CHAR('100')
END "Build",
CASE
WHEN
ts.status in ('CLOSE','CLOSED','Closed') AND
tsk.name in ('Test Result Review','Test Result - Review','UTR - Review') THEN
TO_CHAR('100')
WHEN
UPPER(ts.status) LIKE UPPER('ACCEPTED') AND
tsk.name in ('Test Result Review','Test Result - Review','UTR - Review') THEN
TO_CHAR('75')
WHEN
ts.status IN ('RIP','WIP','REJECTED','Rejected') AND
tsk.name in ('Test Result Review','Test Result - Review','UTR - Review') THEN
TO_CHAR('50')
WHEN
POBJ.ID IN (SELECT POBJ.ID FROM projects pro,project_objects pobj,task tsk,skip_phase sp,employees
emp,employee_project_pairs epp
WHERE pobj.pro_id = pro.id and epp.pro_id = pro.id AND sp.tas_id = tsk.id and
pobj.id = sp.OBJ_ID and pro.id = sp.pro_id
and tsk.name in ('Test Result Review','Test Result - Review','UTR - Review')
AND PRO.ID = :p2_projects ) THEN
TO_CHAR('100')
END "Testing",
CASE
WHEN
ts.status in ('CLOSE','CLOSED','Closed') AND
tsk.name in ('Release-Review','Release - Verification',
'Migration & Release - Review') THEN
TO_CHAR('100')
WHEN
UPPER(ts.status) LIKE UPPER('ACCEPTED') AND
tsk.name in ('Release-Review','Release - Verification',
'Migration & Release - Review') THEN
TO_CHAR('75')
WHEN
ts.status IN ('RIP','WIP','REJECTED','Rejected') AND
tsk.name in ('Release-Review','Release - Verification','Migration & Release - Review') THEN
TO_CHAR('50')
WHEN
POBJ.ID IN (SELECT POBJ.ID FROM projects pro,project_objects pobj,task tsk,skip_phase sp,employees
emp,employee_project_pairs epp
WHERE pobj.pro_id = pro.id and epp.pro_id = pro.id AND sp.tas_id = tsk.id and
pobj.id = sp.OBJ_ID and pro.id = sp.pro_id
and tsk.name in ('Release-Review','Release - Verification','Migration & Release - Review' )
AND PRO.ID = :p2_projects ) THEN
TO_CHAR('100')
END "Release"
FROM
task_status ts,projects pro,project_objects pobj,task tsk
,employees emp,employee_project_pairs epp,REVIEW_ITEMS RI
WHERE
pobj.pro_id = pro.id
and pro.id = ts.pro_id
and pobj.id = ts.pro_obj_id
and tsk.id = ts.task_id
and emp.id = epp.emp_id
and epp.pro_id = pro.id
and ts.id = ri.ts_id
AND PRO.ID = :p2_projects
and tsk.name in ('Incomming-Doc Review','Incoming Doc- Review',
'Incoming Doc- Review','FDD - Review','Design Review','Design - Review','TDD - Review',
'Build Review','Build - Review','Code - Review','Code',
'Test Result Review','Test Result - Review','UTR - Review',
'Release-Review','Release - Verification','Migration & Release - Review')
and ri.open_timestamp in
SELECT
distinct
max(ri.open_timestamp)
FROM
task_status ts,projects pro,project_objects pobj,task tsk
,employees emp,employee_project_pairs epp,REVIEW_ITEMS RI
WHERE
pobj.pro_id = pro.id
and pro.id = ts.pro_id
and pobj.id = ts.pro_obj_id
and tsk.id = ts.task_id
and emp.id = epp.emp_id
and epp.pro_id = pro.id
and ts.id = ri.ts_id
and tsk.name in ('Incomming-Doc Review','Incoming Doc- Review',
'Incoming Doc- Review','FDD - Review','Design Review','Design - Review','TDD - Review',
'Build Review','Build - Review','Code - Review','Code',
'Test Result Review','Test Result - Review','UTR - Review',
'Release-Review','Release - Verification','Migration & Release - Review')
AND PRO.ID = :p2_projects
GROUP BY POBJ.NAME,TSK.NAME )
UNION
select
distinct
pro.project_name "Project Name",
pobj.name "Object Name",
PRO.ID "PRO_ID",
POBJ.ID "POBJ_ID",
case
when
tsk.name in ('Incomming-Doc Review','Incoming Doc- Review',
'Incoming Doc- Review','FDD - Review') THEN
TO_CHAR('100')
end "Incoming-Doc",
case
when
tsk.name in ('Design Review','Design - Review','TDD - Review') THEN
TO_CHAR('100')
end "Design",
case
when
tsk.name in ('Build Review','Build - Review','Code - Review','Code') THEN
TO_CHAR('100')
end "Build",
case
when
tsk.name in ('Test Result Review','Test Result - Review','UTR - Review') THEN
TO_CHAR('100')
end "Testing",
case
when
tsk.name in ('Release-Review','Release - Verification',
'Migration & Release - Review') THEN
TO_CHAR('100')
end "Release"
FROM
projects pro
,project_objects pobj
,task tsk
,skip_phase sp
,employees emp
,employee_project_pairs epp
WHERE
pobj.pro_id = pro.id
and epp.pro_id = pro.id
AND sp.tas_id = tsk.id
and pobj.id = sp.OBJ_ID
and pro.id = sp.pro_id
and tsk.name in ('Incomming-Doc Review','Incoming Doc- Review',
'Incoming Doc- Review','FDD - Review','Design Review','Design - Review',
'TDD - Review','Build Review','Build - Review','Code - Review','Code',
'Test Result Review','Test Result - Review','UTR - Review',
'Release-Review','Release - Verification','Migration & Release - Review')
and pro.id = :p2_projects ) X
WHERE
PRO.ID = POBJ.PRO_ID AND
PRO.ID = IE.PROJECT_NAME AND
UPPER(POBJ.NAME) = UPPER(IE.OBJECT_NAME) AND
PRO.ID = SV.PROJECT_NAME AND
UPPER(POBJ.NAME) = UPPER(SV.OBJECT_NAME) AND
PRO.ID = :p2_projects
AND PRO.ID = X."PRO_ID"
AND POBJ.ID = X."POBJ_ID"(+)
AND PRO.ID = IEV."PRO_ID"
AND POBJ.ID = IEV."POBJ_ID"
AND PRO.ID = ID."PRO_ID"
AND POBJ.ID = ID."POBJ_ID"
AND PRO.ID = D."PRO_ID"
AND POBJ.ID = D."POBJ_ID"
AND PRO.ID = B."PRO_ID"
AND POBJ.ID = B."POBJ_ID"
AND PRO.ID = T."PRO_ID"
AND POBJ.ID = T."POBJ_ID"
AND PRO.ID = R."PRO_ID"
AND POBJ.ID = R."POBJ_ID"
AND PRO.ID = IDR."PRO_ID"
AND POBJ.ID = IDR."POBJ_ID"
AND PRO.ID = DR."PRO_ID"
AND POBJ.ID = DR."POBJ_ID"
AND PRO.ID = BR."PRO_ID"
AND POBJ.ID = BR."POBJ_ID"
AND PRO.ID = TR."PRO_ID"
AND POBJ.ID = TR."POBJ_ID"
AND PRO.ID = RR."PRO_ID"
AND POBJ.ID = RR."POBJ_ID"
AND PRO.ID = AEV."PRO_ID"
AND POBJ.ID = AEV."POBJ_ID"
AND PRO.ID = RIEV."PRO_ID"
AND POBJ.ID = RIEV."POBJ_ID"
AND PRO.ID = BRV."PRO_ID"
AND POBJ.ID = BRV."POBJ_ID"
group by
PRO.PROJECT_NAME,
POBJ.NAME,
SV.status,
sv.comments,
ID."INCOMMING_DOC",D."DESIGN",B."BUILD",T."TESTING",R."RELEASE",
IDR."INCOMMING_DOC_REPLAN",DR."DESIGN_REPLAN",BR."BUILD_REPLAN",TR."TESTING_REPLAN",RR."RELEASE_REPLAN",
AEV."Total Actual",IEV."Total Plan",RIEV."Total Plan",
BRV."BSV",BRV."RSV",POBJ.Complexity,POBJ.PROGRAM_TYPE,pro.id,pobj.id,BRV."Status"
wht is the mistake i am doing here please suggets
thanks
Sudhir

Can you just setup an Excel/Essbase retrieval to get the data you need? You can't use SQL to query Essbase; here is a blog post that talks about it:
http://timtows-hyperion-blog.blogspot.com/2008/01/why-you-cant-use-sql-to-query-essbase.html
Since I made that post, I have found out that Essbase has now been integrated into the latest version of the Oracle BI Server and, technically, you could use SQL to query the data in Essbase via the Oracle BI Server if you have the right version.
Tim Tow
Applied OLAP, Inc

How to Get Prior Year Month Value in Query

I have a query requirement to get the Sales and Sales Previous Year in the result line for a Product.
Calendar Month is also in the rows of the query.
Example - I would need Sales for 10/2009 and Sales Previous Year for 10/2008.
I'm using the variable CMONTH as an interval with offsets to get 24 months before and after the current month.
How can I get Sales Previous Year on the same line as using variable offsets on 0CMONTH does not work as
0CMONTH is always considered to be the current month ?

Yes, I understand - sorry, I was thinking about 0calmonth2 or is it 3 ??, the one with just the month, not the year, being in the rows.... it will give you the breakdown by months for each column.
if you want to be able to select on the months, create an interval variable on the 0calmonth2 like mentioned already - you wont need to offset on that one though, because you already got the offset on the year...
regards
jacob
Edited by: Jacob Jansen on Oct 8, 2009 7:18 PM
Edited by: Jacob Jansen on Oct 8, 2009 7:20 PM

How to add different query results in Report designer

Hi,
I am creating a report based on 3 queries. At the end i need to show total of 3 query results.
How can i add results of queries in report designer??
thanks in advance

Hi Siva,
As u said that u want to show the results of the queries through report designer but i think it is used for formatted reports .
If u want to see tha results of diffrent query then u can use workbook .
In workbook u can also analyse reports easily by applying slice and dice techniques .
from different queries result set will be displayed on workbook with formatting and good look and feel.
regards,
Supriya

Variable for calender month in BEX Query

Hi all ,
I am new to BI .
Can any one please guide on how to create a month year variable that I can get calculated from a date..
For Example
if billing date is 01.02.2009 then my variable should have 02.2009 in Query   .
Regards,
Shashank

Hi Shashank,
    You can achieve this by creating a customer exit variable for calendar month.
Function module :
READ TABLE i_t_var_range WITH KEY vnam = 'Date variable name ' INTO loc_var_range.
   IF sy-subrc = 0.
    year = loc_var_range-low(4).
    month = loc_var_range-low+4(2).
     CLEAR l_s_range.
     l_s_range-sign = 'I'.
     l_s_range-opt = 'EQ'.
     CONCATENATE year month INTO l_s_range-low.
     APPEND l_s_range TO e_t_range.
   ENDIF.
Hope this will help you. Let me know if you have any questions.
Regards
Suvarna

How to month in select query.....for vbap

Hi Experts,
I am using selection option Listbox ( January, February, March, etc...).
How to use it in select query for table vbap (Shown below),
I want to retrieve data of january from vbap and matches erdat in pa_mnr.
    parameters: pa_mnr type ztemp-zlist as listbox visible
                length 13 default 'January'.
    select * from vbap into corresponding fields of table it_vbap
             where matnr in matnr1 and
                   gsber = 'HIP'   and
                   vstel = 'BSP'   and
                   erdat in pa_mnr.

hi,
take the date from the select option.
let say you have date, month and year seperate select option..
then look at some FM whcih gives month number for your month name..
concatenate all the three separated by dot and put it in a variable of type datum..
now your variable contains the user selected date.
you can write your select query.
rewards if useful
regards,
nazeer

Monthly Qty Sales Query

Ran this Query below and it pulled up redundant data for Jan and June?! Anyone know how to correct? Should be just Jan 2010.
Thanks,
Mike
SELECT T0.ITEMCODE,
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 1 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'JAN QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 2 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'FEB QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 3 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'MAR QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 4 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'APR QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 5 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'MAY QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 1 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'JUN QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 7 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'JUL QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 8 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'AUG QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 9 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'SEP QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 10 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'OCT QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 11 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'NOV QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 12 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'DEC QTY'
FROM [dbo].[OITM] T0
LEFT JOIN [dbo].[INV1] T1 ON T1.ItemCode = T0.ItemCode
WHERE T0.SellItem = 'Y'
GROUP BY T0.ItemCode,YEAR(T1.DOCDATE) HAVING YEAR(T1.DOCDATE) = YEAR(GETDATE())
ORDER BY T0. ITEMCODE

Mike,
I notice that for the Month of June the MONTH(T1.DOCDATE) = 1 is pointing to Jan which I corrected to 6 in the query below.
SELECT T0.ITEMCODE,
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 1 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'JAN QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 2 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'FEB QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 3 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'MAR QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 4 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'APR QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 5 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'MAY QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 6 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'JUN QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 7 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'JUL QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 8 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'AUG QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 9 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'SEP QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 10 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'OCT QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 11 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'NOV QTY',
(SELECT SUM(T1.QUANTITY) FROM INV1 T1 with (NOLOCK)
WHERE MONTH(T1.DOCDATE) = 12 AND T1.ITEMCODE =
T0.ITEMCODE AND YEAR(T1.DOCDATE) = YEAR(GETDATE())) AS 'DEC QTY'
FROM dbo.OITM T0
LEFT JOIN dbo.INV1 T1 ON T1.ItemCode = T0.ItemCode
WHERE T0.SellItem = 'Y'
GROUP BY T0.ItemCode, YEAR(T1.DOCDATE) HAVING YEAR(T1.DOCDATE) = YEAR(GETDATE())
ORDER BY T0. ITEMCODE
Suda

Sysdate + 12 month add in query

Similar Messages

Maybe you are looking for