System call, line continuation issue
Hello,
I used Java system call on a linux script as below:
Runtime.getRuntime().exec(myScript.bsh);
Where myScript.bsh is a bash script file. While the bash script file was executed, the issue is that some scripts in the file were skipped during exectution when there is a line continuation symbol. e.g.
runCommandLine arg1 \
arg2 \
arg3
The above command in myScript.bsh will not be executed. However, it will be executed successfully if I put the above command in one single line without the use of line continuation.
I would appreciate any insights on how to get the script run with line continuation.
Yuanshui
Yancy_cheng wrote:
Thank you very much. It works!
While the line continuation works, another problem comes up:
/bin/more: /bin/more: cannot execute binary file
when below line is executed:
more $1 | grep run_range_modulator | sed s/-s1/-p$theta/g > tmp
I would appreciate the help. This sounds like a *nix problem instead of a Java problem.
Confirm that you can execute the command directly in a terminal window.
You may have to wrap the call in a shell.
Similar Messages
-
How to make system call to execute command line in JAVA?
Hi,
I am new in JAVA. How to make system call to execute the following command line in JAVA in LINUX environment.
rpm -qa jdkIn C programming, use as such:
system ("rpm -qa jdk");
How about JAVA?
Thanks.Runtime.getRuntime().exec. But first read this:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html -
Issuing Solaris system calls through Java
How can I issue a system call to Solaris using Java? (i.e. Start a script, open a file, and similar)
Hi Srini,
This is just a suggestion, but try entering the following commands (in your SQL*Plus session) before executing your stored procedure:
set serveroutput on size 1000000
exec dbms_java.set_output(1000000)Hope this helps.
Good Luck,
Avi. -
Error during installation of ECC6- system call failed
Dear all,
i encounter the error as below during sap installation. its looks like the ID issue, but this id (fbqadm) is using by me to log into the windows. please help me.
thank
ERROR 2009-03-17 10:07:25.583 [syxxsyshlp.cpp:78]
syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
FSL-00001 System call failed. Error 1326 (Logon failure: unknown user name or bad password.
) in execution of system call 'LogonUser' with parameter (fbqadm, SAPFBWDEV01, *******, LOGON32_LOGON_INTERACTIVE,LOGON32_PROVIDER_DEFAULT,&hUserToken), line (1014) in file (synxccuren.cpp).
TRACE 2009-03-17 10:07:25.813 [iaxxejsbas.hpp:408]
handleException<ESyException>()
Converting exception into JS Exception ESyException.
TRACE 2009-03-17 10:07:25.813
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtExceptionproblem fix after reboot the server
-
Exchange 2007 SP3 Install on 2008R2 Fails with "The data passed to a system call is too small"
I'm installing Exchange 2007 SP3 onto Server 2008 R2. I have run this install in compatibility mode and in normal install mode with the same results. Error code 3221684346: The data area passed to a system call is too small. I am installing directly from
the SP3 files, this is not an upgrade. What do I have to do to get this to work?
[2/15/2011 7:24:18 AM] [2] Interpreting line <CreateSecureKey:MSExchangeIS\ParametersPrivate> -- ID:31259 --
[2/15/2011 7:24:18 AM] [2] CInsParser::ScProcessLine (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\hiddenw1.cxx:1199)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Processing file 'C:\Exchange Server\Setup\data\mdb_reg.ins', at or near line 77 (CreateSecureKey:MSExchangeIS\ParametersPrivate) -- ID:31111 -- CInsParser::ScProcessLine (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\hiddenw1.cxx:488)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Registry file name: 'C:\Exchange Server\Setup\data\mdb_reg.ins' CRegistryManager::ScProcessFile (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\tools\regmgr.cxx:125)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Filename = 'C:\Exchange Server\Setup\data\mdb_reg' CBaseAtom::ScRunRegistryFile (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:1379)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Leaving CBaseAtom(Information Store Service)::ScRunRegistryFile
[2/15/2011 7:24:18 AM] [2] Filename = 'C:\Exchange Server\Setup\data\mdb_reg' CBaseAtom::ScAddRegistryKeys (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:1249)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Leaving CBaseAtom(Information Store Service)::ScAddRegistryKeys
[2/15/2011 7:24:18 AM] [2] CAtomBaseMDB::ScAddRegistryKeys (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_basemdb.cxx:132)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Leaving CAtomBaseMDB::ScAddRegistryKeys
[2/15/2011 7:24:18 AM] [2] CBaseAtom::ScAdd (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:639)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Leaving CBaseAtom(Information Store Service)::ScAdd
[2/15/2011 7:24:18 AM] [2] Service = 'MSExchangeIS' CBaseServiceAtom::ScAdd (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\basesvcatom.cxx:203)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Leaving CBaseServiceAtom(Information Store Service)::ScAdd
[2/15/2011 7:24:18 AM] [2] mode = 'Install' (61953) CBaseAtom::ScSetup (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:535)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] ScSetupAtom (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:897)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[2/15/2011 7:24:18 AM] [2] Leaving ScSetupAtom
[2/15/2011 7:24:18 AM] [2] [ERROR] An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[2/15/2011 7:24:18 AM] [1] The following 1 error(s) occurred during task execution:
[2/15/2011 7:24:18 AM] [1] 0. ErrorRecord: An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[2/15/2011 7:24:18 AM] [1] 0. ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[2/15/2011 7:24:18 AM] [1] [ERROR] An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[2/15/2011 7:24:18 AM] [1] Setup is halting task execution because of one or more errors in a critical task.
[2/15/2011 7:24:18 AM] [1] Finished executing component tasks.
[2/15/2011 7:24:18 AM] [1] Ending processing.
[2/15/2011 7:42:08 AM] [0] End of Setup
[2/15/2011 7:42:08 AM] [0] **********************************************I would probably rebuild the host machine. The Exchange installation should occur without any issues, and where a problem does occur that can be an indication of a more widespread problem. Rebuild the machine, reinstall the prerequisites and try again.
Simon.
Simon Butler, Exchange MVP
Blog |
Exchange Resources | In the UK?
Hire Me.
Hello Poster.
I am having the same issue, however it is most likely NOT a host box problem. The above advice is not a fix. I have 3 servers that are cloned with the same setup. 2 were fixed by doing the Vista compatibility trick, this one gave a different error (which
happened to be the same as above). This org was a 5.5 to 2000. to 2003 coexistence with 2007 currently(because the mailbox role won't install). It has something to do with AD or permissions. Server 2008 r2 inherently has problems installing exchange.
Example, having to use vista compatibility to get the mailbox role to install. SP2 patch gives the same error to some people, and also doesn't upgrade the mailbox role properly in some cases. Some people have had luck restarting the IIS admin service, but
that did not solve my copy of this error. I will repost here if I find a solution to this issue...
Same exact setup log for me as well.
[3/4/2011 10:45:51 AM] [2] Interpreting line <OpenMachineKey:SYSTEM\CurrentControlSet\Services> -- ID:31259 --
[3/4/2011 10:45:51 AM] [2] Interpreting line <CreateSecureKey:MSExchangeIS\ParametersPrivate> -- ID:31259 --
[3/4/2011 10:45:51 AM] [2] CInsParser::ScProcessLine (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\hiddenw1.cxx:1199)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Processing file 'C:\Program Files\Microsoft\Exchange Server\Setup\data\mdb_reg.ins', at or near line 77 (CreateSecureKey:MSExchangeIS\ParametersPrivate) -- ID:31111 -- CInsParser::ScProcessLine (f:\08.03.0083\sources\dev\admin\src\libs\exsetup\hiddenw1.cxx:488)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Registry file name: 'C:\Program Files\Microsoft\Exchange Server\Setup\data\mdb_reg.ins' CRegistryManager::ScProcessFile (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\tools\regmgr.cxx:125)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Filename = 'C:\Program Files\Microsoft\Exchange Server\Setup\data\mdb_reg' CBaseAtom::ScRunRegistryFile (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:1379)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Leaving CBaseAtom(Information Store Service)::ScRunRegistryFile
[3/4/2011 10:45:51 AM] [2] Filename = 'C:\Program Files\Microsoft\Exchange Server\Setup\data\mdb_reg' CBaseAtom::ScAddRegistryKeys (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:1249)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Leaving CBaseAtom(Information Store Service)::ScAddRegistryKeys
[3/4/2011 10:45:51 AM] [2] CAtomBaseMDB::ScAddRegistryKeys (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\components\server\a_basemdb.cxx:132)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Leaving CAtomBaseMDB::ScAddRegistryKeys
[3/4/2011 10:45:51 AM] [2] CBaseAtom::ScAdd (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:639)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Leaving CBaseAtom(Information Store Service)::ScAdd
[3/4/2011 10:45:51 AM] [2] Service = 'MSExchangeIS' CBaseServiceAtom::ScAdd (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\basesvcatom.cxx:203)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Leaving CBaseServiceAtom(Information Store Service)::ScAdd
[3/4/2011 10:45:51 AM] [2] mode = 'Install' (61953) CBaseAtom::ScSetup (f:\08.03.0083\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:535)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] ScSetupAtom (f:\08.03.0083\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:897)
Error code 0XC007007A (122): The data area passed to a system call is too small.
[3/4/2011 10:45:51 AM] [2] Leaving ScSetupAtom
[3/4/2011 10:45:51 AM] [2] [ERROR] An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[3/4/2011 10:45:51 AM] [1] The following 1 error(s) occurred during task execution:
[3/4/2011 10:45:51 AM] [1] 0. ErrorRecord: An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[3/4/2011 10:45:51 AM] [1] 0. ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[3/4/2011 10:45:51 AM] [1] [ERROR] An error occurred. The error code was 3221684346. The message was The data area passed to a system call is too small..
[3/4/2011 10:45:51 AM] [1] Setup is halting task execution because of one or more errors in a critical task.
[3/4/2011 10:45:51 AM] [1] Finished executing component tasks.
[3/4/2011 10:45:51 AM] [1] Ending processing.
Just curious though, how long is your FQDN? Mine is 34 characters plus whatever exchange is adding to it during setup for this particular string. I found a post with the same error for ISA server and some buffer is only 100 characters for a system call.
ERROR_INSUFFICIENT_BUFFER 122 (0x7A) The data area passed to a system call is too small. http://msdn.microsoft.com/en-us/library/ms681382(v=vs.85).aspx Indicates a msft programming problem.
Outsource Technology Inc. MSFT Professional Consultant -
Reading output of a system call
Hi,
It appears that java system call does not return a value in Netware OS.
The same code functions flawlessly on other OS'es, eg. linux and windows.
If the following code is run on a Netware (6.5), the following error is
returned:
External App Returned:
java.io.IOException: Bad file number
Does anyone knows how to receive the values from the system call on Netware?
To reproduce the problem, do the following:
1) save the included source code to netware server's sys:java/classes
with a filename ExecuteExternalApp.java
2) compile it issuing a console command:
javac sys:java/classes/ExecuteExternalApp.java
3) execute the application:
java ExecuteExternalApp volumes
This should successfully launch the system command "volumes" but also
would give an error message:
External App Returned:
java.io.IOException: Bad file number
---- Source code
import java.io.*;
public class ExecuteExternalApp{
public static String executeSystemCommand(String command) throws
Exception {
String ret = "";
try
Process process = Runtime.getRuntime().exec(command);
BufferedReader input = new BufferedReader(new
InputStreamReader(process.getInputStream()));
BufferedReader err = new BufferedReader(new
InputStreamReader(process.getErrorStream()));
//InputStreamReader iar = new
InputStreamReader(process.getInputStream());
StringBuffer sb = new StringBuffer();
String line = "";
//while ((line = input.readLine()) != null)
//testi tuleeko yksi rivi
line = input.readLine();
sb.append(line);
input.close();
ret = sb.toString();
catch (Exception err)
ret = err.toString();
return ret;
public static void main(String[] args) throws Exception {
if (args.length > 0){
String output = executeSystemCommand(args[0]);
System.out.println("External App Returned:");
System.out.println(output);
else
System.out.println("Usage: ExecuteExternalApp <command>");Guenter wrote:
> Hi Jonne,
> Jonne Viljanen <jonne.viljanen@rmv_this.helsinki.fi> wrote in
> news:y%[email protected]:
>
>> Thank you for your effort. I've been trying to write a simple program
>> that would monitor if any cluster resource would be in comatose and in
>> such case, it would try to online the resource on some other cluster
>> node. For this I'd need to run these system commands and parse their
>> output:
>>
>> - "cluster resources" - to see if any resource is in comatose
>>
>> and
>>
>> - "cluster view" - to determine which nodes are online.
>>
>> Also i'd need to run "cluster offline resource" and "cluster online
>> resource node", but for these command I would not need to get the
>> output.
>>
>> I know that my approach is a bit clumsy, but it's beauty is in its
>> simplicity. Novell's engineer suggested that with a bit more effort one
>> could read the data from ldap or cluster related virtual XML files on
>> the _Admin volume. I think that I should investigate the latter
>> approach, since I'd like to avoid handling the ldap authentication. I
>> appreciate any comments and suggestions. Code examples are also greatly
>> welcomed ;-)
> hmmm, well that sounds to me as if the language doesnt matter at all since
> finally you most likely fire your app from cron to do these tasks frequently
> automatically, right? Therefore I'd suggest you take a look at Perl - it
> seems better suited for these tasks; look at sys:/perl/scripts where you find
> Perl scripts which do already some cluster stuff, and AFAICT these make use
> of the _ADMIN volume.
> Additional info and Perl samples can be found with the VFS NDK IIRC:
> http://developer.novell.com/wiki/ind..._File_Services
>
> greetz, Gnter.
>
Hi Gnter,
Thank you for your excellent help. I started to play with the _ADMIN
-volume today. I was amazed to see how much can be done with it. I got
my little cluster watch application almost working in just 1 hour, but
then spent the rest of the day trying to get it fully functional ;-) I
still cannot figure out what is wrong with my code, so I was wondering
if I could get any help from this newsgroup.
I'm able to read the *.xml files and determine the cluster state and all
the information I need. However I dont seem to be able to write the
command files. I'm trying the following:
public void offlineClusterResource(String resourceName) {
String fileName = "_ADMIN:/Novell/cluster/Resource.cmd";
//String logFile = "sys:java/classes/ClusterWorker.log";
String commandLine = "<virtualIO><datastream
name=\"command\"></virtualIO>"+
"<ncsRequest><offline>" +
"<resource>" + resourceName + "</resource>" +
"</offline></ncsRequest>";
//Log("Turning the cluster resource " + resourceName + "
offline!!!", logFile);
try {
//PrintWriter in autoFlush mode
PrintWriter pw = new PrintWriter(new FileWriter(fileName,
false), false);
pw.println(commandLine);
pw.close();
} catch (IOException e) {
System.out.println("Unable to write " + fileName);
It seems not to write anything to _ADMIN:/Novell/cluster/Resource.cmd.
If I set the file to be eg. SYS:/tmp/Resource.cmd -it writes nicely to
the file.
What am I missing here?
Cheers,
Jonne -
Problems with accept () system call in Solaris 10
We are doing some prototyping in Solaris 10/Zones using TCP sockets and have encountered the problem the "accept" system call in Solaris 10 always seem to return immediately without waiting for clients to connect to it. The same program works fine under Solaris 9 without any problems.
So in the following call:
ssock = accept( sockfd, (struct sockaddr*)bind_address, &alen );
if( ssock < 0 )
printf( "Accept failed: ...\n" );
the program always prints "accept failed: " continuously. Is this a known issue?The problem only occurs when we use INADDR_ANY to bind a socket. The program works as expected when we use real as well as virtual IP address configured for an interface on any Solaris Zone. When we use INADDR_ANY, error number is 14 (EFAULT, Bad Address).
Just wondering if we need to make any configuration changes in order to allow INADDR_ANY to work. -
Hi experts,
When I install additonal dialog instance , the system issue the error:
INFO 2014-12-23 16:34:04.436 [syuxcfile.cpp:218]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file /sapmnt/HE5/exe/jdbcconnect.jar.
ERROR 2014-12-23 16:34:04.466 [syuxcfile.cpp:292]
CSyFileImpl::copy(const CSyPath & /usr/sap/HE5/SYS/exe/run/jdbcconnect.jar, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
FSL-00009 System call failed. Error 13 (The file access permissions do not allow the specified action.) in execution of system call 'openU' with parameter (/usr/sap/trans/tmp/AIXinst/swpm/COMMON/INSTALL/JDBCCONNECT.JAR, O_RDONLY), line (291) in file (syuxcfile.cpp), stack trace: EJSController.cpp: 183: EJSControllerImpl::executeScript()
JSExtension.hpp: 1072: CallFunctionBase::call()
iaxxbfile.cpp: 493: CIaOsFile::copyFromPath_impl()
syuxcfile.cpp: 255: CSyFileImpl::copy(const CSyPath & /usr/sap/HE5/SYS/exe/run/jdbcconnect.jar, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
WARNING 2014-12-23 16:34:04.488 [syuxcpath.cpp:663]
CSyPath::getOSNodeType(bool false) lib=syslib module=syslib
System call failed. Error 13 (The file access permissions do not allow the specified action.) in execution of system call 'lstat' with parameter (/usr/sap/trans/tmp/AIXinst/swpm/COMMON/INSTALL/JDBCCONNECT.JAR), line (660) in file (syuxcpath.cpp), stack trace: EJSController.cpp: 183: EJSControllerImpl::executeScript()
JSExtension.hpp: 1072: CallFunctionBase::call()
iaxxbfile.cpp: 493: CIaOsFile::copyFromPath_impl()
syuxcfile.cpp: 255: CSyFileImpl::copy(const CSyPath & /usr/sap/HE5/SYS/exe/run/jdbcconnect.jar, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
syuxcpath.cpp: 604: CSyPath::getOSNodeType(bool false)
ERROR 2014-12-23 16:34:04.489 [syuxcfile.cpp:308]
CSyFileImpl::copy(const CSyPath & /usr/sap/HE5/SYS/exe/run/jdbcconnect.jar, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
FSL-02015 Node /usr/sap/trans/tmp/AIXinst/swpm/COMMON/INSTALL/JDBCCONNECT.JAR does not exist.
ERROR 2014-12-23 16:34:04.506
CJSlibModule::writeError_impl()
MUT-03025 Caught ::ESyException in module call: At line 311 file syuxcfile.cpp
Call stack:
EJSController.cpp: 183: EJSControllerImpl::executeScript()
JSExtension.hpp: 1072: CallFunctionBase::call()
iaxxbfile.cpp: 493: CIaOsFile::copyFromPath_impl()
syuxcfile.cpp: 255: CSyFileImpl::copy(const CSyPath & /usr/sap/HE5/SYS/exe/run/jdbcconnect.jar, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
System call failed. Error 13 (The file access permissions do not allow the specified action.) in execution of system call 'openU' with parameter (/usr/sap/trans/tmp/AIXinst/swpm/COMMON/INSTALL/JDBCCONNECT.JAR, O_RDONLY), line (291) in file (syuxcfile.cpp), stack trace: EJSController.cpp: 183: EJSControllerImpl::executeScript()
JSExtension.hpp: 1072: CallFunctionBase::call()
iaxxbfile.cpp: 493: CIaOsFile::copyFromPath_impl()
syuxcfile.cpp: 255: CSyFileImpl::copy(const CSyPath & /usr/sap/HE5/SYS/exe/run/jdbcconnect.jar, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Node /usr/sap/trans/tmp/AIXinst/swpm/COMMON/INSTALL/JDBCCONNECT.JAR does not exist.
INFO 2014-12-23 16:34:05.31 [syuxccuren.cpp:285]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroupInt)
lib=syslib module=syslib
Effective group id set to 204.
ERROR 2014-12-23 16:34:06.281 [CSiStepExecute.cpp:1158]
FCO-00011 The step copyScripts with step key |NW_DI|ind|ind|ind|ind|0|0|NW_Unpack2|ind|ind|ind|ind|unpack|0|copyScripts was executed with status ERROR ( Last error reported by the step: System call failed. Error 13 (The file access permissions do not allow the specified action.) in execution of system call 'openU' with parameter (/usr/sap/trans/tmp/AIXinst/swpm/COMMON/INSTALL/JDBCCONNECT.JAR, O_RDONLY), line (291) in file (syuxcfile.cpp), stack trace: EJSController.cpp: 183: EJSControllerImpl::executeScript()
JSExtension.hpp: 1072: CallFunctionBase::call()
iaxxbfile.cpp: 493: CIaOsFile::copyFromPath_impl()
syuxcfile.cpp: 255: CSyFileImpl::copy(const CSyPath & /usr/sap/HE5/SYS/exe/run/jdbcconnect.jar, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
INFO 2014-12-23 16:34:06.962 [syuxcpath.cpp:447]
CSyPath::createFile() lib=syslib module=syslib
Creating file /tmp/sapinst_instdir/BS2005/ERP60SR3/AS-ABAP/ORA/HA/DI/__instana_tmp.xml.
INFO 2014-12-23 16:34:13.663 [syuxcpath.cpp:447]
CSyPath::createFile() lib=syslib module=syslib
Creating file /tmp/sapinst_instdir/BS2005/ERP60SR3/AS-ABAP/ORA/HA/DI/instslana.xml.
Can any expert help me ? Thanks a lot.>>ERROR 2014-12-23 16:34:04.466 [syuxcfile.cpp:292]
CSyFileImpl::copy(const CSyPath & /usr/sap/HE5/SYS/exe/run/jdbcconnect.jar, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
FSL-00009 System call failed. Error 13 (The file access permissions do not allow the specified action.) in execution of system call 'openU' with parameter (/usr/sap/trans/tmp/AIXinst/swpm/COMMON/INSTALL/JDBCCONNECT.JAR, O_RDONLY), line (291) in file (syuxcfile.cpp), stack trace: EJSController.cpp: 183: EJSControllerImpl::executeScript()
JSExtension.hpp: 1072: CallFunctionBase::call()<<
Based on the log it is more likely an issue related to the file permissions. have you tried giving full permissions to the files?
Check these files:
ls -la /usr/sap/HE5/SYS/exe/run/jdbcconnect.jar
ls -la /usr/sap/trans/tmp/AIXinst/swpm/COMMON/INSTALL/JDBCCONNECT.JAR
If possible relax the file permissions (if required) and retry the step in sapinst.
Cheers
RB -
Trex installation error FSL-00001 System call failed. Error 3
I am installing trex on multiple hosts for a Production setup. Trex is version 7.0 patch level 40. All hosts are Windows servers running on "Windows Server 2003 R2 Enterprise x64 Edition, Service Pack 2" Distribution of trex instances are as follows,
Index Server =1
Slave Server =1
Backup Server =1
File Server =1
I started of with installing Trex global filesystem which resulted in following error,
ERROR 2008-10-23 15:19:27
FSL-00001 System call failed. Error 3 (The system cannot find the path specified.
) in execution of system call 'FindFirstVolumeMountPoint' with parameter (
?\Volume{51f489f8-8ef6-11dd-886f-001e0beae60e}\), line (91) in file (synxcfsmit.cpp).
ERROR 2008-10-23 15:19:27
MUT-03025 Caught ESyException in Modulecall: The system cannot find the path specified.
ERROR 2008-10-23 15:19:27
FCO-00011 The step getMounts with step key |NW_TREX_Prepare|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|NW_getMounts|ind|ind|ind|ind|0|0|getMounts was executed with status ERROR .
Installation is performed by administrator user and so has full access rights. Has anyone encountered such an error before.
Regards,
SandeepI uninstalled the Python application via the Windows "Add/Remove" programs utility and that seems to have resolved the issue.
TREX has been installed successfully. -
- Can I make system calls to access the local file system? If
so, is there a sample?
- Can I make system calls to run local console
scripts/binaries and get the output back? If so, is there a sample?
Thanks,"Greg Lafrance" <[email protected]> wrote in
message
news:gd8flp$sul$[email protected]..
> To be fair, Adobe's initial vision for AIR is not as a
technology that
> would
> permit you to create desktop apps that do all that
"regular" desktop apps
> do.
>
> Part of the reason is because they wanted to have a
solution that "starts"
> to
> blur the lines between online and desktop, but I suspect
another reason is
> because they wanted to get it out the door, and dealing
with the
> additional
> security considerations might delay that.
>
> That said, I'm right there with you, I am looking
forward to when AIR apps
> can
> execute native apps.
>
> One of the problems is that Adobe has "grown up" and now
is getting a
> touch
> stiff, though I still believe they will continue to be
one of the greatest
> software firms out there for the next 5 - 10 - 15+
years.
>
> Of course I work there, so I'm at least a bit biased.
But then again, I am
> a
> bit of a rebel against some aspects of Adobe (and
definitely against some
> aspects of the former Macromedia) culture.
Heh. Been there, done that. They stopped giving me t-shirts -
Webservice for ICI to interogate CRM based on Calling Line ID
Hello
We are just starting looking at linking our telephony to CRM IC using the standard Web Services provided in the ICI but I cannot find any information/example on which WSDL I need to use to achieve my objective.
We are basically trying to start out with a very simple task of interrogating CRM based on the customer Calling Line ID (telephone number) to see if a record exists and then to send a response back to the telephony system containing customer account number if the calling line ID is found.
I have followed the configuration to setup the CRM end but just need help with what to send the developers at the telephony end.
Thanks
MattHi
If any hints on fixing this issue do let us know this is getting urgent
Thanks in Advance
Kamalakar -
I moved up to Sun Studio 12 hoping that I could solve a age old problem that allows me to share my code via NFS across multiple systems. AIX and GCC Linux precompilers and compilers have not problem with a code like this:
#ifndef FSIBITON^M
#define FSIBITON(x) \^M
(long)( \^M
( ~(unsigned long)0 >> x ) & \^M
( ~(unsigned long)0 << ((sizeof(long)*8) - (x+1)) ) \^M
)^M
#endif^M
(where ^M is the CR character)
but for Solaris with the Sun Solaris compilers I have always had to copy the tree and convert to UNIX text.
The line continuations are there for z/OS MVS record length limits to avoid having to modify default systems to build on that platform.
Error:
"/release/rel122/rps100/fsilib/unix/../h/fsi.h", line 118: token not allowed in directive: \
Is there some undocumented flag/option I can use to get past this error? I hope so. Otherwise have to go back to coping lots and lots of code around, converting to Unix text as I do it, preserve the date based on the original file and then copy the binaries back to staging afterwards. On AIX and Linux and Windows they can all build in parallel from the SCM export.Sorry, I don't know of a way around this exact issue.
Studio compilers will ignore the CR in a CR/LF sequence, but the C compiler does not accept what looks like an escaped CR. (The C++ compiler does accept what was intended as an escaped newline sequence.)
Is the CR actually necessary? I thought that on systems using CR/LF as the default newline would accept LF as a newline as well in source code.
If you have a Studio support contract with Oracle, you can file a request for enhancement (RFE) on the C compiler via your support channel to address your problem.
Edited by: Steve_Clamage on Jul 30, 2012 9:18 AM -
"The data area passed to a system call is too small." Windows 8
I am not a developer - thus many comments do not make sense to me, as I'm just a heavy user. Today, about a year and half after beginning to use Windows 8, hyperlinks in my emails return the error "The data area passed to a system call is too small."
Can you give a layperson (i.e. simple - is it fixable and can I fix it?) answer to this error? If I copy and paste the URL into my IE 10 browser, it works. However, this takes more time than I usually can afford given how often I use email links to continue
my work.
Here's a picture of the error message:
OOPS, just got big RED message: Body text cannot contain images or links until we are able to verify your account.
I seem to have one (logged in automatically as sunwalkermsdn).
Thanks for any help to this newly appearing issue.
(will I get an email if you post an answer? - due to same message above, I cannot enter my email address)This is a developer forum. We cannot help you to fix a web site, unless you own the web site in question and you can release a fix by yourself if you just need some advise on web development.
Contact the web site's owner if you don't own the web site in question.
Visual C++ MVP -
i am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?
I
got your message about making sure to use the machine specific disk that came with my machine. Unfortunately, Apple no longer sells Tiger replacement disks. I've got a couple of bids out on ebay, and will update when I have news to add to this post.
Thank you for your help, Frank!
To be clear you called the 800 number and explained what the situation was, old machine and lost the original DVD's?
Just checking because if you just called and tried to buy the DVD's they might tell you they no longer sell them but you aren't really trying to buy them your trying to replace the ones that are missing.
Ebay may work but there is a certain specificity to the DVD's required which, even if they seem right, might not work.
Good luck either way. If you get a chance when you get the DVD's I'd be interested in hearing how it all works out.
regards -
I USED TO be able to make phone calls using continuity on my MacBook Pro (Retina, 15-inch, Mid 2014) with Yosemite (10.10) via my iPhone 6 Plus on iOS 8.1 without any problems. Once I updated Yosemite to 10.10.1, my iPhone's springboard would continually crash where it brings up the Apple logo and quickly restarts repeatedly until I end the call. Just so that you know, I am able to stay on the call while this is occurring the whole time.
I need to reiterate, this all started happening as soon as I updated Yosemite to 10.10.1 while still on iOS 8.1. I know this because I made a few phone calls (loving the feature), updated Yosemite to 10.10.1, then made a few phone calls afterwards, and this started happening.
When iOS 8.1.1 came out, I eagerly updated hoping this issue would go away, and it did not. I'm hoping Apple notices this post. If anyone else has this problem, please contact Apple and chime in this post as well. Thank you Apple for incorporating continuity calling. I love this feature, but need to use it without my phone's springboard constantly crashing.I have this issue as well. I am using an iPhone 6 plus, iPad Air 2, 5K iMac, and MacBook Pro. When I make a continuity calls from any device, the springboard crashes. This only happens with outgoing calls, incoming calls are functioning normal. I am currently working with multiple Apple Senior Advisors, and they are working directly with iOS a engineers. I have an active open case and will update this thread when a resolution is found.
Just a tip for everyone with this issue, restoring your devices and setting them up as new WILL NOT correct this issue. Save yourself the hassle. I did this with my iPhone, iPad, and MacBook and the issue still persists.
Maybe you are looking for
-
Link to external style sheet for ie only not responding
Just went live with a new site (www.northwindcorp.com) and my footer is 5 pixels off in all pages except home page (which is set up with absolute positioning). This is the code in the head of all pages: <!--[if lte IE 7]>If this page is not displayin
-
Error 1719 - the windows installer could not be accessed
HP Touchsmart 610-1250x Windows 7 Home Premium error message 1719 and Internet Explorer has stopped working (not the 64 bit version) Canon camera software and Adobe Flash Player updated
-
Why does my ICloud take forever to backup all my pictures and apps? Its been two days already
Why does my ICloud take forever to backup all my pictures and apps? Its been two days already, what can i do?
-
Using Built-in Audio/Mbox for recording on Garage Band - Need Help!
So I just found out that Pro Tools is not yet compatible with Leopard, so I'm working in Garage Band. I want to use live guitars and mics, and I'm curious about the inputs. Obviously for guitars all I have is 1/4" cables. If I get an 1/8" converter f
-
Hi I'm film student. In a Ethernet,how can a Macs control the other Macs, using the Apple Remote Software? Can I use it to control all the Macs in the lab? If i set different Ethernet with many Macs, If i want to install a softwares for all the Macs