System error in block parforEach: Exception why is process finished?

Hi everybody,
we split a message in BPM. Then we loop the multiline-container element.
For each line-item we call a WebService synchrounous.
We got a exception branch for system errors.
Now we got the following problem:
Our produces abount 3000 line-items.
While processing e.g. item 1000 we got a system error and the BPM jumped into the execption branch. After processing the exception branch the process FINISHED!
We assumed that the process would go on processing the remaining items!
Is there a workaroud, that the process does go on with processing the remaining items?
Regards Mario

Hi,
After handling the exception, the process will be continuing after that block. So you can try to put the block within a loop until all the line items get over.
Regards,
P.Venkat

Similar Messages

Reboot due to system error / Register dump from exception handler

hi,
I have a problem with Labview RT when using Reboot function.
The RT target (desktop) reboot but there is a message : Reboot due to system error. And if I reboot once again, the target become in safe mode.
Now, If I look at the log I obtain the following message see more in the log attached!
*** REGISTER DUMP FROM EXCEPTION HANDLER (code 0x80000003) ***
I don't understand why there is this message.
Anybody has an explaination?
Attachments:
Nouveau Document texte2.txt ‏6 KB

julesjay a écrit:
ok I didn't know that. I will wait for tomorrow.
NI france is not very efficient about labview Real time problems.
There is one or two experts and there aren't easily reachable.
So a lot of question I send stay with no answer.....
That why I hope someone will be able to help me.
Hi Julesjay,
After i have see your log file and the problem, i think NI FRANCE are working on your request for all problems you have in your application.
And i don't understand what you say that, because we have make test, we have send us informations for make different tests, and we are still working on your problem.
I know the problem are not resolved, but we are working for resolve it quickly.
I suggested you to contact the AE that are your service request for have more information.
Best regards,
Christophe S.
FSE East of France І Certified LabVIEW Associate Developer І National Instruments France

SSIS BULK INSERT unsing UNC inside of ForEach Loop Container Failed could not be opened. Operating system error code 5(Access is denied.)

Hi,
I am trying to figure out how to fix my problem
Error: Could not be opened. Operating system error code 5(Access is denied.)
Process Description:
Target Database Server Reside on different Server in the Network
SSIS Package runs from a Remote Server
SSIS Package use a ForEachLoop Container to loop into a directory to do Bulk Insert
SSIS Package use variables to specified the share location of the files using UNC like this
\\server\files
Database Service accounts under the Database is runing it has full permission on the share drive were the files reside.
In the Execution Results tab shows the prepare SQL statement for the BULK insert and I can run the same exact the bulk insert in SSMS without errors, from the Database Server and from the server were SSIS package is executed.
I am on a dead end and I don’t want to re-write SSIS to use Data Flow Task because is not flexible to update when metadata of the table changed.
Below post it has almost the same situation:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de13e74-709a-43a5-8be2-034b764ca44f/problem-with-bulk-insert-task-in-foreach-loop?forum=sqlintegrationservices

Insteresting how I fixed the issue, Adding the Application Name into the SQL OLAP Connection String Fixed the issue. I am not sure why SQL Server wasn't able to open the file remotely without this.

What does BYE system error mean?

I am using javamail to connect to an IMAP service. Most of the time it seems fine, but once in a while I get an error message when trying to connect to the store:
javax.mail.MessagingException: * BYE System Error 42if5891749yxe.30;
nested exception is:
com.sun.mail.iap.ConnectionException: * BYE System Error 42if5891749yxe.30
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:609)
at javax.mail.Service.connect(Service.java:291)
Anyone know what the cause might be?

Other clients may not be using the same IMAP protocol messages that JavaMail does.
The error may be triggered by different behavior in JavaMail vs. other mail clients, but the
error is still occurring in the server, not in JavaMail.
It looks like you're getting the error when you try to connect. Does it occur every time
you try to connect? Does the full protocol trace provide any other useful information about
what might be going wrong? Are you using the technique described in the JavaMail FAQ
to connect to Gmail?

System error on nokia c7 symbian belle

Hi, I'm having problem on my nokia c7, sometimes it hangs and when i restart it shows a message ''system error'', i don't knows why is this happening i restored my phone but still its showing error report although in phone message it shows the number instead of person name which is already saved in contacts. Please help.........

Hi tarbiya,
Please perform a hard reset by entering *#7370# and default security code 12345.
Don't forget to make a back up first with Nokia Suite. Go to Tools > Back up, but don't make a back up of your settings.
You can restore the back up onto your phone after the reset by going to Tools > Restore.
Also update the phone's software to make sure it works to it's full potential, you can do this by clicking on the green arrow in Nokia Suite.
Let me know if you manage to resolve the issue, otherwise I can provide further support.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

No Exception Defined for System Errors

hi,
I am capturing system messages through an Exception error handler in the block step of Integration Processes.
Its a IDOC -> XI -> HTTP Receiver scenario.
When i execute the scenario, i see an error in the workflow in the Block Step. It shows an Error which says "No Exception Defined for System Errors", though i have a Exception Branch in the Block step.
Any clues why i am not able to capture the Exception errors and send it through email.
Its failing at the Block step.
More details on the scenario:
1. Start
2. Receive Step - Asynch - IDOC
3. Block Step - with Exception name as "TimeOut"
3.1 Exception Branch with exception handler as "Timeout"
3.1.1 - Transform Step - to transform a Exception message(with just one field) to "Error" message (with 5 fields)
3.1.2 - Send Step - send the "Error" message through email
3.2 Deadline branch set to 1 minute
3.3 Switch step
3.3.1 Transformation step - to transform the IDOC to XML
3.3.2 Send step - Synch - request xml and response xml defined in this step
4. Switch Step
4.1 - Transform step - transforms the idoc and xml response to the actual error
4.2 - Send Step - sends the actual error to the email message using MAIL adapter.
Any tips would be grateful.
Thanks,
Tirumal

Stefan -
In step 3.3.2
I did find the property exceptions and assigned the exception branch in the block and ran the scenario, now i get an error saying that : "Exception Timeout Occurred."
I went through the Technical Details of the workflow and the error displayed there is "Exception 'Timeout' caught and transferred to the exception handler'.
In step 3.1.1
I get an error saying "No Payload found'.
Does this mean its not able to capture the message text.
Thanks in advance,
Tirumal

Error while releasing PO : System error: block object EKKO, Key PO Number.

Dear All,
I am getting error while releasing PO : System error: block object EKKO, Key PO Number.
Please help to resolve.

Hi Friend,
How the issue is resolved, because i am facing the same issue, while positing Service entry sheet.
If you can give us solution, it will be more useful and more appreciated
REgards
RS

How to handle the plsql error occuring in the exception block

We know how to handle exceptins which occur in BEGIN block.
But am unable to catch the exception in the exception block. Am writing an erroeneous code so that the control will go to exception block and there is also one plsql error, but am unable to handle that error, it's returning the error to the calling environment.
DECLARE
cnt NUMBER(5):=0;
BEGIN
select 'debalina' INTO cnt from dual;
DBMS_OUTPUT.PUT_LINE(to_char(cnt));
EXCEPTION
WHEN invalid_number THEN
DBMS_OUTPUT.PUT_LINE('error has occured inside begin block');
cnt:='deba';
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('error has occured inside begin block');
END;
please suggest me how to catch this exception?

Hi,
DECLARE
cnt NUMBER(5):=0;
BEGIN
select 'debalina' INTO cnt from dual;
DBMS_OUTPUT.PUT_LINE(to_char(cnt));
EXCEPTION
WHEN invalid_number THEN
DBMS_OUTPUT.PUT_LINE('error has occured inside begin block');
cnt:='deba';
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('error has occured inside begin block');
END;
First of all your namee exception which you have posted i.e invalid_number itself is wrong.
You need to use named exception VALUE_ERROR for catching the exception in the main block.
SQL> DECLARE
2 cnt NUMBER(5):=0;
3 BEGIN
4 select 'debalina' INTO cnt from dual;
5 DBMS_OUTPUT.PUT_LINE(to_char(cnt));
6 EXCEPTION
7 WHEN Invalid_number THEN
8 DBMS_OUTPUT.PUT_LINE('error has occured inside main block');
9 end;
10 /
DECLARE
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at line 4
SQL> DECLARE
2 cnt NUMBER(5):=0;
3 BEGIN
4 select 'debalina' INTO cnt from dual;
5 DBMS_OUTPUT.PUT_LINE(to_char(cnt));
6 EXCEPTION
7 WHEN VALUE_ERROR THEN
8 DBMS_OUTPUT.PUT_LINE('error has occured inside main block');
9 end;
10 /
error has occured inside main block
PL/SQL procedure successfully completed.Your doubt regarding catching the exception in exception block, you can execute as below, by nesting a Begin block inside the exception block itself.
SQL> DECLARE
2 cnt NUMBER(35):=0;
3 BEGIN
4 select 'debalina' INTO cnt from dual;
5 DBMS_OUTPUT.PUT_LINE(to_char(cnt));
6 EXCEPTION
7 WHEN Value_error THEN
8 DBMS_OUTPUT.PUT_LINE('error has occured inside main block');
9 Begin
10 cnt:='deba';
11 Exception
12 WHEN OTHERS THEN
13 DBMS_OUTPUT.PUT_LINE('error has occured inside exception block');
14 End;
15 END;
16 /
error has occured inside main block
error has occured inside exception block
PL/SQL procedure successfully completed.Hope your doubt is clear.
Twinkle

Java system error: Exception in method processFunction in BEX Broadcaster

Hi All,
We are trying to broadcast a BI7 Webtemplate with our enterprise portal. While clicking on "Create New setting " iam getting the error " Java system error: Exception in method processFunction ".
Detailed error description is
*Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
Notification Number RSBOLAP 018 *
Please let us know how to proceed

Hi,
This is a configuration issue. All components on the J2EE stack have to
be on the same SPS level. Please make sure of this as a first step.
For special requirements of BI with regards SPS levels please see SAP
Notes 873996 and 1013369.
Please run the latest version of the support desk tool as per SAP note
937697 and ensure that there is no error and then check for the issue
again.
Otherwise, I suggest you open a BW-BEX-ET-BC msg with SAP.
Rgds,
Colum

When connecting to cube via msmdpump.dll, an error pops up saying the following system error occurred: the server threw an exception

users are able to pick the SSAS database and cube, it's at the final step and suddenly excel had this error:
The following system error occurred: the server threw an exception...
Other users have no such issues at all
any ideas?
thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Hi Cat_ca,
Glad to hear that your issue had been solved by yourself. Thank you for your sharing.
Regards,
Charlie Liao
TechNet Community Support

System Error:ADS :com.adobe processingException:XMLFM Exception during render Exception

Dear All, We have configured ADS in DEV and QAS it is working fine. We have done the same configuration in PRD but it is giving the following error when we execute the program FP_CHECK_DESTINATION_SERVICE: SYSTEM ERROR: ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: XMLFM Exception during render: org.omg.CORBA.COMM_FAILURE(200,101). Exception of class CX_FP_RUNTIME_INTERNAL System Info : SAP ECC EHP6 SAP NW 7.31 Kindly suggest some solution. Regards, Mustafa

HI
Note 944221 - Troubleshooting if problems occur in forms processing
Note 717568 - FPRUNX001, 002 or 004 with output of PDF-based forms
Note "959462 - ISR/Adobe/Web Dynpro Java: Configuration problems"
Note 1288500 - HR-RU: ADS: XMLFM Exception-P(200101) message no.FPRUNX001
Note 1143442 - Shift report: Error "ADS: XMLFM Exception"
AND YOU CAN CHACK AGAINST FOLLOWING Problem:
1). Check the JCO RFC from Java to ABAP server.
2). Check the ADS connection in SM59.
Check the document more troubleshooting steps
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?QuickLink=index&overridelayout=true
http://forums.sdn.sap.com/thread.jspa?threadID=842415

SYSTEM-ERROR. Tokens: MESSAGE = Io exception: NL Exception was generated;

Hello,
When I am running a page in jdev, I am getting the following error:
NVFactory: _readNVPair expected )
NVFactory: _readNVPair expected )
NVFactory: _readNVPair expected )
NVFactory: _readNVPair expected )
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: SYSTEM-ERROR. Tokens: MESSAGE = Io exception: NL Exception was generated; (Could not lookup message because there is no database connection) at oracle.apps.fnd.framework.OACommonUtils.processAOLJErrorStack(OACommonUtils.java:884).....
Till yesterday the page was running fine but suddenly I am encountering this exception.
The DBC file is also fine without any slashes(/).
The DataBase connection is getting established successfully.
Please give your suggetions on to solve this issue.
Thank you.

Right click on the DB connection you are using and check whether you able to connect and open the "Sql Worksheet"?
--Shiv

BPC - "System.Exception: System error" selecting a CV dimension in Web

Hello,
I have a problem. In the Current view when I want to select a Dimension in the CV (CurrentView) in the Web Browser (BPC Web) for example DataSrc I cant. In the popup it gives me "No Result" and a plus with "More". When I select the plus, it gives me an popup with an system error:
System.Exception: System error
   at Microsoft.VisualBasic.CompilerServices.LateBinding.InternalLateCall(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack, Boolean IgnoreReturn)
   at Microsoft.VisualBasic.CompilerServices.LateBinding.LateCall(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)
   at OSoft.Services.Webservice.WebInfoProxy.WebInfoProxy.GetCVInfo(String strAppSet, String strApp, String strDim, String strUName, String strStart)
The funny thing is that this error only give me in 4 dimensions. I have processed them completelly with excel menber included. I have processed it with the analysis service of the SQL Server 2005. But it says that it's "OK".
In the Excel it is OK. It shows everything OK, the dimensions show correctly.
Please can someone help me?
Thank you very much in advance.
Pablo Mortera.

Strange, I've never seen that before. If you can browse the CV for some dimensions, but not others, what's different about those 2 groups? Is it the secured dimensions that are problematic? Or certain dimension types? Or perhaps a dimension name that's a reserved word?
If you can't figure it out, please post here the names of the dimensions in the application. Maybe that'll jog someone's memory.

Adobe Form Call: System Error Exception

Hi,
I have created an Adobe Form for printing Invoices. When I call this form from print program using function module call "CALL FUNCTION fp_funcname" it throws Exception "System Error = 2". Can any one flash some light to resolve this issue.
Here I have given that function module call below.
CALL FUNCTION fp_funcname
EXPORTING
/1BCDWB/DOCPARAMS = fp_sfpdocparams
WA_HEADER         = wa_header
T_ITEM                   = t_item
EXCEPTIONS
USAGE_ERROR     = 1
SYSTEM_ERROR   = 2
INTERNAL_ERROR = 3
OTHERS                 = 4.
Thanks
Hari

Hi,
In your initialization use this class : cl_fp=>get_ads_connection( ).
you move this to a parameter fp_outputparams .
MOVE cl_fp=>get_ads_connection( ) TO p_conn.
where fp_outputparams   TYPE sfpoutputparams called in
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = fp_outputparams
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4
      OTHERS          = 5.
Thanks
Dan

Why do I get a generic system error while choosing an icon while on safari

While shopping online, I select an item from the home page and get a generic system error message. How do I resolve this?

Hi Serdj,
you don't get a GPIB error, the error number has just 2 different explanations...
Well, you have two programs accessing the same file. One program just wants to make a copy, the other (LabView) is trying to write to the file. When copying a file that is written to you get inconsistent results! That's why one of both programs is complaining an error...
You can't have write and read access at the same time! (But you can have more than one read access at the same time...)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

System error in block parforEach: Exception why is process finished?

Similar Messages

Maybe you are looking for