Java system error: Exception in method processFunction in BEX Broadcaster

Hi All,
We are trying to broadcast a BI7 Webtemplate with our enterprise portal. While clicking on "Create New setting " iam getting the error " Java system error: Exception in method processFunction ".
Detailed error description is
*Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
Notification Number RSBOLAP 018 *
Please let us know how to proceed

Hi,
This is a configuration issue. All components on the J2EE stack have to
be on the same SPS level. Please make sure of this as a first step.
For special requirements of BI with regards SPS levels please see SAP
Notes 873996 and 1013369.
Please run the latest version of the support desk tool as per SAP note
937697 and ensure that there is no error and then check for the issue
again.
Otherwise, I suggest you open a BW-BEX-ET-BC msg with SAP.
Rgds,
Colum

Similar Messages

Java Proxy error: Exception in method methodExists

Hello all!
We are doing the following synchronous scenario: CRM->XI->JavaProxy--->Third party....
Here is the process we are following to deploy our Proxy:
1.Created EJB Module Project in NWDS
2.Import the files generated by XI into ejbModule folder from ZIP file.
3.Renamed *PortTypeImpl.template to *PortTypeImpl.java
4.Compiled all code (no errors)
5.Added all the references to the SAP libraries required (taken from our XI server):
com.sap.aii.proxy.xiruntime
com.sap.xi.util.misc
com.sap.aii.messaging.runtime
com.sap.guid
6.Codified Java Proxy codified the method <interfacename> in the <intefacename>_PortTypeImpl class.
7.Edited ejb_jar.xml to add EJBs.
8.Provided a JNDI name in the file ejb-j2ee-engine.xml.
9.Built EJB archive (no errors).
10.Created a new Enterprise Application Project and pointed build path to our EJB Project.
11.Added our EJB to the Enterprise Application project.
12.Created the references to the SAP libraries in the Enterprise Application Project in the application-j2ee-engine.xml file:
com.sap.aii.proxy.xiruntime
com.sap.xi.util.misc
com.sap.aii.messaging.runtime
com.sap.guid
13.Within the Enterprise Application Project we built an EAR file.
14.We deployed our .ear file to the J2EE Engine via Visual Admin (no errors).
15.We registered our Java Proxy on the ProxyServer, using
/register?ns=<interface_namespace>&interface=<XI_Interface_Name>&bean=<EJB_JNDI_name> &method=<name of the method implemented by you on the _PortTypeImpl>
Actually, we did the following:
url for registering the EJB:
http://ithpsrq0:50200/ProxyServer/register?ns=http://banco.popular.com.pr/xi/crm&interface=mi_AccountInfo_is&bean=popularinc.com/MiAccountInfoIs_Default&method=miAccountInfoIs
Message displayed when listing interfaces (http://ithpsrq0:50200/ProxyServer/listAll)
http://banco.popular.com.pr/xi/crm#mi_AccountInfo_is = popularinc.com/MiAccountInfoIs_Default:miAccountInfoIs
1 interfaces found
When running the interface we get the following error:
com.sap.aii.af.ra.ms.api.DeliveryException: Error checking method name miAccountInfoIs of remote inbound proxy bean $Proxy250: Exception in method methodExists.: com.sap.aii.proxy.xiruntime.core.XmlInboundException: Error checking method name miAccountInfoIs of remote inbound proxy bean $Proxy250: Exception in method methodExists.
Does anyone have any suggestions?
What causes a "methodExists" Exception?
Please help us,
Thanks a lot!!!

Hi,
Is this a runtime of "com.sap.aii.proxy.xiruntime.core"
please check the jars used, adding this jars will solve this i guess.
aii_utilxi_misc.jar
ejb20.jar
exception.jar
jARM.jar
sapj2eeclient.jar
sapxmltoolkit.jar
aii_msg_runtime.jar
aii_proxy_xirt.jar
Also check, application-j2ee-engine.xml and see if,
com.sap.aii.proxy.xiruntime
com.sap.aii.messaging.runtime
com.sap.xi.util.misc
com.sap.guid
You wil get the jars in XI servers, you can ftp and get the jars, but you may need to search them.
Anotherthing, always take the jars from the xi servers to be sure you are compatible with the upgrades .
Hope this solves your problem.
Anirban.

Java system error, when publishing BI Queries to Portals...

Hello all,
I am getting the error 'Java system error: Exception in method processFunction.' when publishing the BI queries (7.0 with SP 14) into EP 7.0 portals. Our BI system is integrated successfully into Portals.
Further diagnosis shows 'An error occurred in the BI components on the SAP J2EE Engine'.
Please reply to this message with any relevant/useful details to resolve this problem. Thanks in advance...
Thanks,
Ram.

also restart the J2EE engine from SMICM.
Hope it Helps
Chetan
@CP..

Java system error: Server repository could not create function template

Hi, Our BI person is trying to publish/broadcast a query to the PRODCTION portal, she gets the below error message. I am
attaching the defaulttracelog file
"Java system error: Server repository could not create function template for RSRD_X_PRODUCE_PROXY caused by: com.sap.mw.jco.JCO$Exception: (103)"
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[./log/defaultTrace.trc]/>
<!PATTERN[defaultTrace.trc]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!FILESET[8, 20, 10485760]/>
<!PREVIOUSFILE[defaultTrace.7.trc]/>
<!NEXTFILE[defaultTrace.9.trc]/>
<!LOGHEADER[END]/>
#1.5 #002264F9350800600000022F000019C000048E9B91EF3AB3#1282698726384#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence#J2EE_GUEST#0##n/a##4dba6f30af8111df934c002264f93508#SAPEngine_Application_Thread[impl:3]_35##0#0#Error#1#/System/Security/Usermanagement#Java#An exception was thrown in the UME/ABAP user management connector that was caused by unavailability of the RFC communication with the backend system: "". ##An exception was thrown in the UME/ABAP user management connector that was caused by unavailability of the RFC communication with the backend system: "". #1#Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '127.0.0.1:sapgw00' not reached
TIME Tue Aug 24 21:12:06 201
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 56
#1.5 #002264F93508006000000230000019C000048E9B91EF47C8#1282698726384#com.sap.engine.services.monitor.mbeans.Monitor#sap.com/irj#com.sap.engine.services.monitor.mbeans.Monitor#J2EE_GUEST#0##n/a##4dba6f30af8111df934c002264f93508#SAPEngine_Application_Thread[impl:3]_35##0#0#Error##Plain###Caller J2EE_GUEST not authorized, user J2EE_GUEST is not available from user management, reason: com.sap.security.api.NoSuchUserException:USER_AUTH_FAILED: User account for logonid "J2EE_GUEST" not found!#
#1.5 #002264F93508006000000231000019C000048E9B91EF4CD5#1282698726384#System.err#sap.com/irj#System.err#J2EE_GUEST#0##n/a##4dba6f30af8111df934c002264f93508#SAPEngine_Application_Thread[impl:3]_35##0#0#Error##Plain###com.sap.engine.services.jmx.exception.JmxSecurityException: Caller J2EE_GUEST not authorized, user J2EE_GUEST is not available from user management, reason: com.sap.security.api.NoSuchUserException:USER_AUTH_FAILED: User account for logonid "J2EE_GUEST" not found!
 at com.sap.engine.services.jmx.auth.UmeAuthorization.checkMBeanPermission(UmeAuthorization.java:63)
 at com.sap.engine.services.jmx.JmxServerFrame.checkMBeanPermission(JmxServerFrame.java:98)
 at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.unregisterMBean(MBeanServerSecurityWrapper.java:395)
 at com.sap.engine.services.jmx.ClusterInterceptor.unregisterMBean(ClusterInterceptor.java:1327)
 at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.unregisterMBean(MBeanServerInterceptorChain.java:258)
 at com.sap.engine.services.monitor.mbeans.Monitor.unregister(Monitor.java:106)
 at com.sap.engine.library.monitor.impl0.AbstractMonitorNode.remove(AbstractMonitorNode.java:154)
 at com.sap.engine.library.monitor.impl0.MonitorObjectFactory.uninstallMonitorNode(MonitorObjectFactory.java:483)
 at com.sap.engine.services.monitor.install.MonitorInstaller.uninstallMonitors(MonitorInstaller.java:595)
 at com.sap.engine.services.monitor.install.MonitorInstaller.uninstallMonitors(MonitorInstaller.java:581)
 at com.sap.engine.services.monitor.install.MonitorInstaller.uninstallMonitors(MonitorInstaller.java:581)
 at com.sap.engine.services.monitor.install.MonitorInstaller.uninstallMonitors(MonitorInstaller.java:581)
 at com.sap.engine.services.monitor.install.MonitorInstaller.uninstallMonitors(MonitorInstaller.java:581)
 at com.sap.engine.services.monitor.install.MonitorInstaller.uninstallMonitors(MonitorInstaller.java:581)
 at com.sap.engine.services.monitor.install.MonitorInstaller.uninstallMonitors(MonitorInstaller.java:581)
 at com.sap.engine.services.monitor.install.MonitorInstaller.uninstallMonitors(MonitorInstaller.java:568)
 at com.sap.engine.services.monitor.server.ApplicationLifeCycleImpl.applicationStopped(ApplicationLifeCycleImpl.java:52)
 at com.sap.engine.services.monitor.deployment.MonitorDeploymentContainer.commitStop(MonitorDeploymentContainer.java:630)
 at com.sap.engine.services.deploy.server.application.StopTransaction.commonCommitFinished(StopTransaction.java:244)
 at com.sap.engine.services.deploy.server.application.StopTransaction.commitCommon(StopTransaction.java:290)
 at com.sap.engine.services.deploy.server.application.StopTransaction.commitLocal(StopTransaction.java:278)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:374)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:250)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.stopApplicationLocalAndWait(DeployServiceImpl.java:4569)
 at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.stopApplicationLocalAndWait(DeployCommunicatorImpl.java:628)
 at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime$2.run(SAPJ2EEPortalRuntime.java:602)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.lang.ClassLoader$NativeLibrary.load(Native Method)
 at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1586)
 at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1482)
 at java.lang.Runtime.load0(Runtime.java:737)
 at java.lang.System.load(System.java:811)
 at com.sapportals.wcm.service.fsmount.FSMountService.loadDLL(FSMountService.java:736)
 at com.sapportals.wcm.service.fsmount.FSMountService.<clinit>(FSMountService.java:796)
 at java.lang.Class.forName0(Native Method)
 at java.lang.Class.forName(Class.java:219)
 at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.convertGS(CmConfigurationProvider.java:637)
 at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.convertServiceConfig(CmConfigurationProvider.java:601)
 at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.readConfiguration(CmConfigurationProvider.java:205)
 at com.sapportals.wcm.crt.CrtSystemImpl.createComponentManager(CrtSystemImpl.java:108)
 at com.sapportals.wcm.repository.runtime.CmSystem.startUp(CmSystem.java:202)
 at com.sapportals.wcm.repository.runtime.CmSystem.getInstance(CmSystem.java:164)
 at com.sapportals.wcm.repository.runtime.CmAdapter.getResourceImpl(CmAdapter.java:974)
 at com.sapportals.wcm.repository.runtime.CmAdapter.getResource(CmAdapter.java:192)
 at com.sapportals.wcm.portal.service.KMServiceImpl.afterInit(KMServiceImpl.java:249)
 at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstanceStep2(PortalServiceItem.java:877)
 at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:1118)
 at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1707)
 at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1662)
 at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1592)
 at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:422)
 at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:54)
 at com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>(PortalInitializer.java:129)
 at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:161)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:361)
 at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:42)
 at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:114)
 at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:394)
 at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addServlet(WebComponents.java:139)
 at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:386)
 at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:110)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
#1.5 #002264F93508005C0000042300002CF00004939AAEE9AEB7#1288192475655#com.sapportals.wcm.repository.manager.reporting.RPRepositoryManager#sap.com/irj#com.sapportals.wcm.repository.manager.reporting.RPRepositoryManager#J2EE_GUEST#0##n/a##c7d00e00e1dc11dfa36d002264f93508#SAPEngine_Application_Thread[impl:3]_29##0#0#Error##Plain###setting initial ACL on /reporting_backend/reports/System Administration/CM Store/cm.crawlcontent - com.sap.security.api.NoSuchRoleException: Role with uniqueName system_admin_role not found!
 at com.sap.security.core.imp.RoleFactory.getRoleByUniqueName(RoleFactory.java:1783)
 at com.sapportals.wcm.repository.manager.reporting.RPRepositoryManager.getRoles(RPRepositoryManager.java:1474)
 at com.sapportals.wcm.repository.manager.reporting.RPRepositoryManager.syncReportResources(RPRepositoryManager.java:1334)
 at com.sapportals.wcm.repository.manager.reporting.RPRepositoryManager.initBackend(RPRepositoryManager.java:489)
 at com.sapportals.wcm.repository.manager.reporting.RPRepositoryManager.getResource(RPRepositoryManager.java:581)
 at com.sapportals.wcm.repository.RMAdapter.getResource(RMAdapter.java:228)
 at com.sapportals.wcm.repository.runtime.CmAdapter.findResource(CmAdapter.java:1349)
 at com.sapportals.wcm.repository.runtime.CmAdapter.findManagerAndResource(CmAdapter.java:1322)
 at com.sapportals.wcm.repository.runtime.CmAdapter.getResourceImpl(CmAdapter.java:979)
 at com.sapportals.wcm.repository.runtime.CmAdapter.getResource(CmAdapter.java:192)
 at com.sapportals.wcm.service.reporting.ReportingService.localConfigure(ReportingService.java:294)
 at com.sapportals.wcm.service.reporting.ReportingService.startUpImpl(ReportingService.java:74)
 at com.sapportals.wcm.service.AbstractService.start(AbstractService.java:167)
 at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToStart(CrtThreadSafeComponentHandler.java:247)
 at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleLookup(CrtThreadSafeComponentHandler.java:109)
 at com.sapportals.wcm.crt.CrtComponentManager.lookup(CrtComponentManager.java:322)
 at com.sapportals.wcm.crt.CrtComponentManager.lookupChildComponent(CrtComponentManager.java:403)
 at com.sapportals.wcm.crt.CrtContainerManager.lookupComponent(CrtContainerManager.java:44)
 at com.sapportals.wcm.crt.CrtSystemImpl.lookupComponentByUri(CrtSystemImpl.java:131)
 at com.sapportals.wcm.crt.CrtComponentManager.startUp(CrtComponentManager.java:278)
 at com.sapportals.wcm.crt.CrtSystemImpl.startUpComponentManager(CrtSystemImpl.java:166)
 at com.sapportals.wcm.repository.runtime.CmSystem.startUp(CmSystem.java:227)
 at com.sapportals.wcm.repository.runtime.CmSystem.getInstance(CmSystem.java:164)
 at com.sapportals.wcm.repository.runtime.CmAdapter.getResourceImpl(CmAdapter.java:974)
 at com.sapportals.wcm.repository.runtime.CmAdapter.getResource(CmAdapter.java:192)
 at com.sapportals.wcm.portal.service.KMServiceImpl.afterInit(KMServiceImpl.java:249)
 at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstanceStep2(PortalServiceItem.java:877)
 at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:1118)
 at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1707)
 at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1662)
 at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1592)
 at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:422)
 at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:54)
 at com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>(PortalInitializer.java:129)
 at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:161)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:361)
 at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:42)
 at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:114)
 at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:394)

Go to visual admin -> server -> services -> JCO RFC provider.
Check the RFC that connects to the BI Abap.
Its reporting the J2EE_GUEST user in the SAP with the system nr 00.
Is this BI java portal?
Is the java portal a addon to Abap or having seperate SID?
Check the connection definitions are correct and the gateway is running.

Java.exe error - Exception in thread "main" java.lang.NoClassDefFoundError:

I've just started to take on java, and some examples from my learning source
show the
javac.exe fileincluded.java
to
java.exe fileincluded
method. Although I can compile fine, when I go to run I get a java.exe error - Exception in thread "main" java.lang.NoClassDefFoundError:.
I thought it was an environment variable problem as I'm running win xp.
I've gotten the bin directory included, and I've previously had visual studio .net installed
so the INCLUDE and LIB variables are set to those directories. I've tried to attach the java /lib and /bin directories by ";C:\PROGRAM FILES\JAVA\JDK1.5.0_02\LIB" etc,
and that didn't work. What can I do to fix this problem?

I get the I/O exception while reading: D:\Java\HelloApplet (The system cannot find the file specified). I have previously compiled HelloApplet.java into HelloApplet.class using javac.exe
the two include statements in the sample HelloApplet I'm using are
import java.applet.*;
import java.awt.*;
I also have a ComponentEventTest.java file which I've made into a class with these two
include statements:
import java.awt.*;
import java.awt.event.*;
I can however compile .java files which have no include statements.
I take it that my classpath is not set correctly. Like I said earlier, I'm using winxp
and trying to set the classpath variable under system. I have tried under user too. The path names I've tried setting are C:\Program Files\Java\jdk1.5.0_02\, C:\Program Files\Java\jdk1.5.0_02\lib, C:\Program Files\Java\jdk1.5.0_02\include, and C:\Program Files\Java\jdk1.5.0_02\;C:\Program Files\Java\jdk1.5.0_02\lib;C:\Program Files\Java\jdk1.5.0_02\include.
How can I correct this? If it's possible, I would like to set a variable in windows
versus having to type extra commands at the command prompt everytime I try
to run a java class with java.exe. Any help would be much appreciated

Java system error: call FM RSWR_SYSTEM_ALIAS_CHECK_PROXY

We've setup BI 7.0 (EP) using SSO to our ECC 6.0 system leveraging EP on our BI box. Anyways, SSO is activated and working when EP on the BI system calls a BSP or a Transactional iView using ITS on ECC 6.0.
Our issue is when we execute a report BI (EP) utilizing RRI to a transaction in ECC 6.0 we're receiving the following error with SSO:
Termination message sent
ABEND RSBOLAP (018): Java system error: call FM RSWR_SYSTEM_ALIAS_CHECK_PROXY to ProgId COHPSAP06D_PORTAL_BPD on host cohpsap06d with SSO not authorized: Authenticatio
MSGV1: call FM RSWR_SYSTEM_ALIAS_CHECK_PROXY to ProgId CO
MSGV2: HPSAP06D_PORTAL_BPD on host cohpsap06d with SSO no
MSGV3: t authorized: Authenticatio
When we didn't have SSO enable we recevied the typical login screen for the ITS. After we setup SSO we cannot even log in now.
--KAL

Hello Kal,
Am not very sure of the solution but to drill down to the exact cause you can do this small test:
1. In the reference system in Portal, you can remove the ITS enteries like ITS hostname, etc, keeping the rest of the enteries unchanged.
Now, if the exception goes..this shows that the exception could be due to some wrong ITS entry or somewhere related to ITS
If the issue persists then looking at the exception it feels like you should check the in Portal Visual Admin...
Hope this helps.
All the best,
Ritu

RSBOLAP 018 Java system error in BEx Web Application Designer

Hello,
while doing inside BEX Web Application Designer "validation of webtemplate" with
command "validate on server" I get following error message of WAD :
" Message RSBOLAP 018 description : Java system error : an Unknow Error occured during portal communication"
My procedure till now was ( please see results as screenshots in attachment) :
a) ckecking prerequisites for "Java template installer'" --> result "prerequisites.jng"
b) running "Java template installer" -> " result templateInstaller.jpg"
c) running Bex Web Application Designer as mentioned above results in error
message as mentioned above
d) running Diagnostic & Support Desktop Tool --> "result Diagnostic support desktop tool.jpg"
It says that something is wrong with "BI Mastersystem" because of failed connect to
message server.
Please advice me what I should do.
Thanks in advance
Regards,
Oscar

Hello
It is obvious that the connection between the ABAP and the Java is not working.
There should be a JCo RFC from the portal side to the ABAP stack set up and an RFC from the ABAP stack to the portal.
Check the entries of the table RSPOR_T_PORTAL
The RFC specified here should be the one mentioned above (ABAP - Java)
Check the name of the system should be SAP_BW
Is the parameter icm/host_name_full set on the ABAP stack with the domain name ?
Connect to the BI portal:
http://FQDN:5NN00/irj/portal
Navigate to system administration -> system configuration -> system landscape -> expand "portal content" -> systemlandscape -> SAP_BW
Right click on SAP_BW - Open - Object
Here you need to maintain these:
ITS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
ITS Host Name - FQDN_OF_BW_ABAP:port - You can use the value of icm/host_name_full parameter and retrieve port number from Tx SMICM - Services
ITS Path - /sap/bc/gui/sap/its/webgui
ITS Protocol - Select http
Logical System Name - BW ABAP Logical System Name - Tx SCC4 or BD54
Logon Method -SAPLOGONTICKET
Message server - BW ABAP FQDN
SAP Client - BW ABAP Client Number
SAP System ID (SID) - BW ABAP SID
Server Port - 39NN
Web AS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
Web AS Host Name - FQDN_OF_BW_ABAP:port - icm/host_name_full and retrieve port number from Tx SMICM - Services
Web AS Path - /sap/bw/BEx
If everything is set properly then do a test connection.
Good Luck
RB

Java System error: SSO not authorized: authorization Failed

Hi,
I am getting the following error while opening a BEx report designer or WAD and iam unable to design any report or create a dashboard
"Java System Error: Call to FM BICS_CONS_GET_VIEW_DEF_J_PROXY to ProdId ASEP_PORTAL_E01 on host ASEP wiht SSO not authorized . Authentication Failed"
System Details:
BI and EP are installed in Same server
BI Config:
softwarwe component : SAP_BW
Release : 700
Patch Level: 0021
Support Pack : SAPKW70021 (SAP NetWeaver BI 7.0)
EP config:
SAP NetWeaver BI 7.0 SP Level 15
Please suggest .

It seems that something wrong in integration between JAVA Stack (from where you accessing BW report) a BW back end system. Try to run Support Desk Tool:
http://<your_server>:<port>/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.ip.bi.supportdesk.default
to see what is wrong in this area.

Java system error

Hi Guru:
Now I could create a web report and execute it.
But each time I save it, there is an error:
Java system Error: Bean RSWR_TEMPLATE_PROCESS_PROXY is not found.
How to solve it?
Thank you very very much.
Best regards,
Eric

i think its the problem with ur internet connection.i mean the proxy settings have to be checked to recover tht problem.

Java system error: call FM RSRD_X_DISTRIBUTE_PROXY to ProgId SERVER_PORTAL_

Hi All,
Java system error: call FM RSRD_X_DISTRIBUTE_PROXY to ProgId SERVER_PORTAL_SID on host SERVER with SSO not authorized: Authenticatio...
also Not able to create user ID in BI Portal with J2ee_admin user, as user has full ( Sap_all) athorization in backend.
Thanks & Regards,
Vamsi

Hi,
i have exactly the same error. Can anybody help? or does anyone have an idea?
Thanks and kind regards,
Murat

Java system error: call FM RSRD_X_PRODUCE_PROXY

Hi Gurus,
When i tried to execute event data change process type in BI component I am getting below error. It clearly says missing password. I haven't understood what password is missing for which user. we checked all user certificates all valid.
Below is the error log:
Java system error: call FM RSRD_X_PRODUCE_PROXY to ProgId BP1TULAP424_PORTAL_WSH on host BP1TULAP424 with SSO not authorized: Missing Password
Message no. RSBOLAP018
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
Any help greatly appreicated. Thanks.
Best Regards,
Reddy.

Hi,
> Java system error: call FM RSRD_X_PRODUCE_PROXY to ProgId MOTDALSUN115_PORTAL_BWP on host motdalsun116 with >SSO not authorized: Authentication fai
>
As per your logs it looks like that user from which you are calling FM does not have proper authorization to run this FM. Please check your authorization.
Thanks
Sunny

System error in asynchronous method start during release of PR

Hi,
When trying to release the purchase requisition out of workflow inbox, information message is displayed as "System error in asynchronous method start". After clicking enter to ignore the information message and trying to release the purchase requisition, the same message pops up again.
Appreciate if someone can please provide help in resolving the issue.
Thank you.

Hi Sanju,
Thank you so much for responding. The user was actually created new in the workflow and there were some missing authorisations. The Basis team fixed the authorisation and the issue is now resolved.
Really appreciate the help.

Adobe Form Call: System Error Exception

Hi,
I have created an Adobe Form for printing Invoices. When I call this form from print program using function module call "CALL FUNCTION fp_funcname" it throws Exception "System Error = 2". Can any one flash some light to resolve this issue.
Here I have given that function module call below.
CALL FUNCTION fp_funcname
EXPORTING
/1BCDWB/DOCPARAMS = fp_sfpdocparams
WA_HEADER         = wa_header
T_ITEM                   = t_item
EXCEPTIONS
USAGE_ERROR     = 1
SYSTEM_ERROR   = 2
INTERNAL_ERROR = 3
OTHERS                 = 4.
Thanks
Hari

Hi,
In your initialization use this class : cl_fp=>get_ads_connection( ).
you move this to a parameter fp_outputparams .
MOVE cl_fp=>get_ads_connection( ) TO p_conn.
where fp_outputparams   TYPE sfpoutputparams called in
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = fp_outputparams
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4
      OTHERS          = 5.
Thanks
Dan

System Error in publish to EP from BEx Web Application Desginer....??

Hi,
I am trying to Intergrate BW Reports into EP using BEx Web Application Designer. I have Configured everything fine. I have tested all the connections they are working fine. When i am trying to "Publish BW Report into EP (Publish > In Enterprise Portal 6.0)" using BEx Web Application Desginer i am getting System Error in Publish to Portal dialog Box.
Please Help me How to resolve this problem
Best Regards
Ravi Shankar B

Ravi,
Did you resolve this issue? We are seeing the same "System Error" in Publish to Enterprise Portal 6.0.
Thank you,
Michael

System Error &H80004005 (-2147467259) in using SAP BEX

Hi i All,
I encountered an error, System Error &H80004005 (-2147467259). Unspecified Error followed by "Out of memory" message, when running my SAP BEX. I tried re-installing my SAP GUI and Excel but the error still persists.
Please advice, Carlo

Guys,
its not a problem with BEx analyzer version.
The problem is with the memory allocated to view a particular WP. If you carefully check sm50 while executing this workbook, you will see the workprocess that is used to execute this workbook. Double click and u can see the details of this workprocess. How much of memory is taken, how much time has this WP been executing this workbook. If the queries in the workbook fetch a lot of data, then you probably might get this error. Ask your Basis guy to increase the memory used by the WP.
hope this helps,
Regards,
Sree.

Java system error: Exception in method processFunction in BEX Broadcaster

Similar Messages

Maybe you are looking for