System out of application memory

As soon as i upgraded to Adobe Premiere 2014, I can no longer export ProRes movies longer than a minute without the system crashing.  Error message is "system out of application memory."  I have a Mac Pro 6.  I
1. Reinstalled Mac os
2. Reinstalled Premiere
3. upgraded to Boris 9
Nothing seems to work.  I have 16 gigs of memory and have ordered a 64 gig setup but if there is a bug in the system, that won't work either.
Surely, someone knows what i going on here? 

Hi Peter,
What kind of media are you using?
What kind of media drive?
How is your media drive connected?
What happens if you remove third party plug-ins?
Thanks,
Kevin

Similar Messages

  • I've updated my Macbook Pro and my iMac with Maverick, updating the various apps. On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory, and it's based our Mail, the only app not updated. Ideas?

    Maverick and Your System message
    I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
    On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
    I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
    I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
    I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
    Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
    Any ideas?

    Maverick and Your System message
    I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
    On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
    I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
    I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
    I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
    Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
    Any ideas?

  • Mavericks Mail Kernel System Has Run Out of Application Memory

    I have a new Mavericks late 2013 MBP.  When I got the computer, I used Migration Assistant to transfer everything from my late 2008 MacBook to the new MBP.  Now when I launch Mail, my memory use skyrockets and within a minute or so, I get a "run out of application memory" error message.  Soon after the computer stops working until I reboot.  Activity Monitor shows Memory Pressure at its redline max, Virtual Memory at about 70 GB, Swap Used 20 GB, Compressed 10 MB.  The processes using all the memory are kernel-task 10 GB and mds_stores 5 GB.  However, Spotlight is fully indexed and mds is inactive until I launch Mail.
    Interestingly, it happens even if I quit Mail immediately after launching it - the Mail window doesn't even need to open; the memory ust still climbs.  But it only happens with Mail; all other applications work fine.  Also, it does not happen if I boot in Safe Mode or if I log in using a different user account.
    I have spend many hours on the phone with the Apple tech guys, they sent log files to Apple engineering, and none can figure this out.  Their solution is to work around by creating a new user and transfer files over - not an elegant solution...
    I ran the diagnostic suggested by Link Davis; results copied below. I also ran the Etresoft diagnostic both before and after launching Mail.  Results also copied below.
    I am guessing that a 3rd party application in my user area causes Spotlight to loose control, when Mail is launched, perhaps trying to index 10,000 emails, but I really have no idea!
    Any help would be GREATLY appreciated!
    Link Davis Diagnostic
    Step 1
    nothing
    Step 2
    com.google.keystone.daemon
    com.adobe.fpsaud
    Step 3
    com.google.keystone.system.agent
    com.displaylink.useragent
    com.zeobit.MacKeeper.Helper
    com.spotify.webhelper
    com.facebook.videochat.rossmeador.updater
    com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716
    com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
    com.adobe.AAM.Scheduler-1.0
    Step 4
    /Library/Components:
    /Library/Extensions:
    ATTOCelerityFC8.kext
    ATTOExpressSASHBA2.kext
    ATTOExpressSASRAID2.kext
    ArcMSR.kext
    CalDigitHDProDrv.kext
    HighPointIOP.kext
    HighPointRR.kext
    PromiseSTEX.kext
    SoftRAID.kext
    /Library/Frameworks:
    .DS_Store
    AEProfiling.framework
    AERegistration.framework
    Adobe AIR.framework
    AudioMixEngine.framework
    DivX Toolkit.framework
    HPDeviceModel.framework
    HPPml.framework
    HPServicesInterface.framework
    HPSmartPrint.framework
    HPSmartX.framework
    NyxAudioAnalysis.framework
    PluginManager.framework
    Skype.framework
    TSLicense.framework
    iLifeFaceRecognition.framework
    iLifeKit.framework
    iLifePageLayout.framework
    iLifeSQLAccess.framework
    iLifeSlideshow.framework
    iTunesLibrary.framework
    /Library/Input Methods:
    /Library/InputManagers:
    Ecamm
    /Library/Internet Plug-Ins:
    AdobePDFViewer.plugin
    AdobePDFViewerNPAPI.plugin
    AmazonMP3DownloaderPlugin101750.plugin
    DRM Plugin.bundle
    Default Browser.plugin
    DirectorShockwave.plugin
    Disabled Plug-Ins
    DivXBrowserPlugin.plugin
    Flash Player.plugin
    Flip4Mac WMV Plugin.plugin
    Flip4Mac WMV Plugin.webplugin
    GarminGpsControl.plugin
    Google Earth Web Plug-in.plugin
    JavaAppletPlugin.plugin
    OfficeLiveBrowserPlugin.plugin
    Quartz Composer.webplugin
    QuickTime Plugin.plugin
    RealPlayer Plugin.plugin
    Silverlight.plugin
    flashplayer.xpt
    googletalkbrowserplugin.plugin
    iPhotoPhotocast.plugin
    npdivx.xpt
    npgtpo3dautoplugin.plugin
    nsIQTScriptablePlugin.xpt
    o1dbrowserplugin.plugin
    /Library/Keyboard Layouts:
    /Library/LaunchAgents:
    com.adobe.AAM.Updater-1.0.plist
    com.displaylink.useragent.plist
    com.google.keystone.agent.plist
    /Library/LaunchDaemons:
    com.adobe.fpsaud.plist
    com.displaylink.usbnivolistener.plist
    com.google.keystone.daemon.plist
    /Library/PreferencePanes:
    DivX.prefPane
    Flash Player.prefPane
    Flip4Mac WMV.prefPane
    /Library/PrivilegedHelperTools:
    /Library/QuickLook:
    GBQLGenerator.qlgenerator
    iBooksAuthor.qlgenerator
    iWork.qlgenerator
    /Library/QuickTime:
    .DS_Store
    AppleIntermediateCodec.component
    AppleMPEG2Codec.component
    macam.app
    macam.component
    /Library/ScriptingAdditions:
    /Library/Spotlight:
    .DS_Store
    GBSpotlightImporter.mdimporter
    LogicPro.mdimporter
    Microsoft Office.mdimporter
    iBooksAuthor.mdimporter
    iWork.mdimporter
    /Library/StartupItems:
    HP IO
    /etc/mach_init.d:
    /etc/mach_init_per_login_session.d:
    /etc/mach_init_per_user.d:
    Library/Address Book Plug-Ins:
    SkypeABDialer.bundle
    SkypeABSMS.bundle
    Library/Fonts:
    Library/Input Methods:
    .localized
    Library/Internet Plug-Ins:
    CitrixOnlineWebDeploymentPlugin.plugin
    FacebookVideoCalling.bundle
    Picasa.plugin
    WebEx.plugin
    WebEx64.plugin
    Library/Keyboard Layouts:
    Library/LaunchAgents:
    com.adobe.AAM.Updater-1.0.plist
    com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
    com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716.plist
    com.facebook.videochat.rossmeador.plist
    com.spotify.webhelper.plist
    com.zeobit.MacKeeper.Helper.plist
    Library/PreferencePanes:
    Library/QuickTime:
    Google Camera Adapter 0.component
    Google Camera Adapter 1.component
    Library/Services:
    .localized
    Step 5
    Nothing
    Etresoft Before Launching Mail
    Hardware Information:
    MacBook Pro (Retina, 13-inch, Late 2013)
    MacBook Pro - model: MacBookPro11,1
    1 2.8 GHz Intel Core i7 CPU: 2 cores
    16 GB RAM
    Video Information:
    Intel Iris - VRAM: 1024 MB
    Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0
    AirPlay: Version: 1.9
    AppleAVBAudio: Version: 2.0.0
    iSightAudio: Version: 7.7.3
    Startup Items:
    HP IO - Path: /Library/StartupItems/HP IO
    System Software:
    OS X 10.9 (13A2093) - Uptime: 0 days 0:6:5
    Disk Information:
    APPLE SSD SM1024F disk0 : (1 TB)
    EFI (disk0s1) <not mounted>: 209.7 MB
    Macintosh HD (disk0s2) /: 999.7 GB (761.42 GB free)
    Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
    Apple Internal Memory Card Reader
    Apple Inc. BRCM20702 Hub
    Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
    Apple Inc. thunderbolt_bus
    Apple Inc. Thunderbolt to Gigabit Ethernet Adapter
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
    [loaded] com.adobe.fpsaud.plist
    [not loaded] com.displaylink.usbnivolistener.plist
    [loaded] com.google.keystone.daemon.plist
    Launch Agents:
    [not loaded] com.adobe.AAM.Updater-1.0.plist
    [failed] com.displaylink.useragent.plist
    [loaded] com.google.keystone.agent.plist
    User Launch Agents:
    [loaded] com.adobe.AAM.Updater-1.0.plist
    [loaded] com.adobe.ARM.[...].plist
    [loaded] com.adobe.ARM.[...].plist
    [loaded] com.facebook.videochat.[redacted].plist
    [loaded] com.spotify.webhelper.plist
    [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
    None
    3rd Party Preference Panes:
    DivX
    Flash Player
    Flip4Mac WMV
    Internet Plug-ins:
    AdobePDFViewer.plugin
    AdobePDFViewerNPAPI.plugin
    AmazonMP3DownloaderPlugin101750.plugin
    Default Browser.plugin
    DirectorShockwave.plugin
    DivXBrowserPlugin.plugin
    Flash Player.plugin
    FlashPlayer-10.6.plugin
    Flip4Mac WMV Plugin.plugin
    GarminGpsControl.plugin
    Google Earth Web Plug-in.plugin
    googletalkbrowserplugin.plugin
    iPhotoPhotocast.plugin
    JavaAppletPlugin.plugin
    npgtpo3dautoplugin.plugin
    o1dbrowserplugin.plugin
    OfficeLiveBrowserPlugin.plugin
    QuickTime Plugin.plugin
    RealPlayer Plugin.plugin
    Silverlight.plugin
    User Internet Plug-ins:
    CitrixOnlineWebDeploymentPlugin.plugin
    Picasa.plugin
    WebEx.plugin
    WebEx64.plugin
    Bad Fonts:
    None
    Time Machine:
    Auto backup: NO
    Time Machine not configured!
    Top Processes by CPU:
        2% WindowServer
        1% EtreCheck
        0% coreservicesd
        0% Dock
        0% CoreServicesUIAgent
        0% imagent
    Top Processes by Memory:
    344 MB   mds_stores
    213 MB   Safari
    115 MB   Dock
    82 MB    mdworker
    66 MB    mds
    33 MB    MacKeeper Helper
    33 MB    PluginProcess
    33 MB    WindowServer
    16 MB    com.apple.dock.extra
    16 MB    storeagent
    Virtual Memory Statistics:
    12.72 GB Free RAM
    1.77 GB  Active RAM
    176 MB   Inactive RAM
    1.33 GB  Wired RAM
    660 MB   Page-ins
    0 B      Page-outs
    Immediately After Launching Mail
    Hardware Information:
    MacBook Pro (Retina, 13-inch, Late 2013)
    MacBook Pro - model: MacBookPro11,1
    1 2.8 GHz Intel Core i7 CPU: 2 cores
    16 GB RAM
    Video Information:
    Intel Iris - VRAM: 1024 MB
    Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0
    AirPlay: Version: 1.9
    AppleAVBAudio: Version: 2.0.0
    iSightAudio: Version: 7.7.3
    Startup Items:
    HP IO - Path: /Library/StartupItems/HP IO
    System Software:
    OS X 10.9 (13A2093) - Uptime: 0 days 0:8:39
    Disk Information:
    APPLE SSD SM1024F disk0 : (1 TB)
    EFI (disk0s1) <not mounted>: 209.7 MB
    Macintosh HD (disk0s2) /: 999.7 GB (761.39 GB free)
    Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
    Apple Internal Memory Card Reader
    Apple Inc. BRCM20702 Hub
    Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
    Apple Inc. thunderbolt_bus
    Apple Inc. Thunderbolt to Gigabit Ethernet Adapter
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    [failed] com.apple.pictd.plist
    Launch Daemons:
    [loaded] com.adobe.fpsaud.plist
    [not loaded] com.displaylink.usbnivolistener.plist
    [loaded] com.google.keystone.daemon.plist
    Launch Agents:
    [not loaded] com.adobe.AAM.Updater-1.0.plist
    [failed] com.displaylink.useragent.plist
    [loaded] com.google.keystone.agent.plist
    User Launch Agents:
    [loaded] com.adobe.AAM.Updater-1.0.plist
    [loaded] com.adobe.ARM.[...].plist
    [loaded] com.adobe.ARM.[...].plist
    [loaded] com.facebook.videochat.[redacted].plist
    [loaded] com.spotify.webhelper.plist
    [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
    None
    3rd Party Preference Panes:
    DivX
    Flash Player
    Flip4Mac WMV
    Internet Plug-ins:
    AdobePDFViewer.plugin
    AdobePDFViewerNPAPI.plugin
    AmazonMP3DownloaderPlugin101750.plugin
    Default Browser.plugin
    DirectorShockwave.plugin
    DivXBrowserPlugin.plugin
    Flash Player.plugin
    FlashPlayer-10.6.plugin
    Flip4Mac WMV Plugin.plugin
    GarminGpsControl.plugin
    Google Earth Web Plug-in.plugin
    googletalkbrowserplugin.plugin
    iPhotoPhotocast.plugin
    JavaAppletPlugin.plugin
    npgtpo3dautoplugin.plugin
    o1dbrowserplugin.plugin
    OfficeLiveBrowserPlugin.plugin
    QuickTime Plugin.plugin
    RealPlayer Plugin.plugin
    Silverlight.plugin
    User Internet Plug-ins:
    CitrixOnlineWebDeploymentPlugin.plugin
    Picasa.plugin
    WebEx.plugin
    WebEx64.plugin
    Bad Fonts:
    None
    Time Machine:
    Auto backup: NO
    Time Machine not configured!
    Top Processes by CPU:
        98% mds_stores
        31% Mail
        3% WindowServer
        1% opendirectoryd
        1% EtreCheck
        1% fontd
        0% usernoted
        0% coreservicesd
        0% Dock
        0% mDNSResponder
    Top Processes by Memory:
    9.67 GB  mds_stores
    262 MB   Mail
    213 MB   Safari
    115 MB   Dock
    98 MB    mds
    66 MB    ReportCrash
    66 MB    WindowServer
    49 MB    Notes
    49 MB    SystemUIServer
    33 MB    MacKeeper Helper
    Virtual Memory Statistics:
    1.54 GB  Free RAM
    12.70 GB Active RAM
    396 MB   Inactive RAM
    1.37 GB  Wired RAM
    954 MB   Page-ins
    0 B      Page-outs

    Have you looked into Activity Monitor utility to see what system resources exist and how they are being allocated to applications, the OS X, and other background functions?
    You could boot in SafeBoot (shift key held through startup) and run Disk Utility> repair disk permissions. That can tell you a few things about your hard disk drive, capacities, and it may not hurt to repair disk permissions. Restart normally when done.
    Or try & boot from the Install DVD and use the version of Disk Utility in there to attempt to 'repair disk' while the HDD is unmounted. Then choose Startup manager to boot from the HDD and ignore the DVD on a restart.
    Is your computer as listed, a PowerPC (pre-intel architecture)
    Apple product, with a G4/G5 CPU from before 2006? If so,
    a host could move the discussion from this Intel area.
    Without more information, a failure of traction results from speculation.
    Is your computer still running OS X 10.5.3, or is that 10.5.8+ now?
    Good luck & happy computing!
    edited 2x

  • Since I installed Mavericks, the system says it run out of applications memory

    I only have opened Finder (no any other app) but my Mac says "the system has run out of application memory". I don't know what the problem is.
    I have a Late-2011 Macbook Pro with 8 GB of RAM. When I enter to "Activity Monitor" I can see that a process called "mds" use a lot of GB of RAM and 100% of my CPU and also kernel_task uses like 5 to 6 GB of my 8 GB of RAM. I reinstalled the OS and still have the problem.
    If someone can help me, I will be very grateful.
    Thanks in advance and sorry for my english.

    I have a brand new MacBook Pro.  I downloaded Mavericks, and I'm moving my information from my old MacBook Pro via Carbonite to my 2 day old MacBook Pro..  Carbonite tells me to continue to use my system...When I open Safari after a short period of time I get the Out of application memory dialog box.  I also use a Brand New IMac which is not having any problems but am I not using Carbonite until I figure out what the problem is.  So I went to the Activity Monitor and I see Safari using 8.5 GB of memory.  What do I need to do to fix this problem of  Out of application memory. As soon as I "Quit Process" for safari  in the Activity Monitor everything drops back to normal...example kenel_task went to 1.1 GB.  Note Mozella only uses 126 MB of memory.  IS the Issue Safari or something else?
    OS X
    Version 10.9.4
    Processor GHz Intel Core I7
    Memory 16GB 1600 MHz DDR3

  • 'Your system has run out of application memory'?!

    I've seen many users experiencing this same problem throughout the community, but none of the fixes have given me a permanent solution. Details of the machine are below, as well as what happens when the problem hits/triggers.
    MBP Retina running OS X Yosemite 10.10.2 (occurred in previous versions as well, thought the latest update would help but it didn't)
    15-Inches Mid 2014 with 16 GB of Ram
    Been using this Mac for good 6 months now, and one fine day of normal usage the whole system seems really laggy and slow and all of a sudden i'm unable to access anything and barely move my mouse. Then, a window pops out, telling me "Your system has run out of application memory", gracefully showing me that I have to force quit all my programmes for me to just stare at my desktop in utter disappointment.
    I've been using Yosemite for awhile now (updated few days since the release) and haven't encountered any major issues, this being the first. Reading through many threads many have said that the problem lies with opening the Mail app, yet I haven't touched that app in months. I've also tried resetting the PRAM on my machine when it happens and the problem comes back again after several minutes of normal usage (iTunes, App Store). Checking the memory usage with the Memory Clean app, it tells me I'm down to a measly '15.58 MB' of memory, and it justfluctuates at that until I give it a restart again. This can't keep happening - I can barely use the Mac for 10 minutes without having to restart it, only to be able to use it only again for another 10 minutes.
    Opening Activity Monitor tells me that mds_stores is the main root of the problem, yet I can't seem to shut the process down. I've googled and many say that mds_stores is spotlight indexing, but taking up all 16 GB of ram? That shouldn't be the case. Is there a fix to this? Does Apple know of its existence?
    Included some screenshots below:

    Step 1
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -F '$Time $Message' -k Sender mdworker -o -k Message Rne Norm -k Sender mds | tail | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message. 
    The Terminal window doesn't show the output. Please don't copy anything from there.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.
    Step 2
    Enter the following command as in Step 1 and post the output:
    mdutil -as 2>&- | pbcopy
    You can then quit Terminal.
    Step 3
    Launch the Console application in the same way you launched Terminal. In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for crash reports related to Spotlight. If you don't see that heading, select
              View ▹ Show Log List
    from the menu bar. A Spotlight crash report has a name beginning in "mds" or "mdworker" and ending in ".crash". Select the most recent such report, if any, from the System and User subcategories and post the entire contents—the text, please, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post any other kind of diagnostic report, such as hang logs—they're very long and not helpful.

  • Your system has run out of application memory Premiere pro cc 2014

    Hi,
    I've been getting the "your system has run out of application memory" message while working on a new project in pr pro cc.
    Here's what i've done so far:
    Updated to OS X 10.9.5 and restarted computer
    went into my activity monitor and stopped programs that were taking up memory, but that didn't solve the problem the message would pop up over and over again.
    this is the first time i've seen this message. I installed the universal free trial red giant plug ins for PR Pro . I'm starting to think that the plug ins are the problem.
    I used several of the universal plugins from red giant on my entire project. I was able to export the project twice w no problems but then when i went back into the project and the notification kept popping up!
    I'm using
    PLS HELP!!!
    thanks!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for crash or panic reports. If you don't see that heading, select
    View ▹ Show Log List
    from the menu bar.
    A crash report has a name that begins with the name of the crashed process and ends in ".crash". It may be under either of the two subcategories, "System" and "User." A panic report has a name that begins with "Kernel" and ends in ".panic".
    Select the most recent of each and post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post any other kind of diagnostic report, such as a hang log — they're very long and not helpful.

  • Your system run out of application memory

    your system run out of application memory i get this message pop up and everything freezes

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
              A long-running process with a memory leak (a kind of bug)
              Not enough memory for your usage pattern
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
              View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the  leaks(1) man page and the Apple developer documentation for details.

  • Keep getting the 'system has run out of application memory' window, what to do?

    I'm running a mid 2010 MacBook with 2.4 Ghz Intel Core 2 Duo processor and OS X 10.9.5. Every time I'm on Safari I get the 'System has run out of application memory' window and it asks you to quit out of programs you're not using.  The problem is sometimes the only things running are Safari and Finder.  It'll then freeze up programs and prevent web pages from loading or showing up.  I'm not quite sure what this means or how to go about fixing it.  Any help would be much appreciated.

    Hi Meghan,
    If you are seeing that alert that you are running out of application memory then I would take a look at using Activity Monitor to see how the memory is being used. If it looks normal usage to you, then you may want to upgrade the memory on your Mac. Take a look at the article below for more information. 
    OS X Mavericks: If your Mac runs slowly
    https://support.apple.com/kb/PH13895
    How to use Activity Monitor
    https://support.apple.com/en-us/HT201464
    Take it easy,
    -Norm G.

  • "Your system has run out of application memory"! Help, please! Thanks!

    Hi,
    Just got the unsettling message saying "Your system has run out of application memory" and I was instructed to close down applications I wasn't using, including browsers, or I might have problems with my computer. Yeesh. This is scary. Is the solution to buy more RAM? Bear with me, I really don't know what to do, and I'd appreciate your help.
    Thanks,
    Kcat
    Tried to update my product listings, but it wouldn't work. I have OS X Mavericks, 10.9.2 on my iMac desktop.

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
    A long-running process with a memory leak (a kind of bug)
    Not enough memory for your usage pattern
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
    View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command: 
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the  leaks(1) man page and the Apple developer documentation for details.

  • "You system has run out of application memory"

    I'm constantly getting this error now.  "You system has run out of application memory"
    machine specs are -
    MACBookPro Retina. 10,1
    2.7 i7
    16 GB 1600 MHz DDR3
    GT 650M 1024 MB
    OSX 10.9.4 (13E28)
    750 GB Solid State drive with 211 GB free.
    does any know what may being going on?  What can I do to fix?
    Thanks in advance for your help.
    Brian

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
              A long-running process with a memory leak (a kind of bug)
              Not enough memory for your usage pattern
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
              View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the  leaks(1) man page and the Apple developer documentation for details.

  • What can I do when it says "your system has run out of application memory?

    What can I do when it says "your system has run out of application memory?"

    The message has nothing to do with low disk space.
    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
              A long-running process with a memory leak (a kind of bug)
              Not enough memory for your usage pattern
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
              View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the  leaks(1) man page and the Apple developer documentation for details.

  • New MacBook Pro Out of Application Memory

    I just spent over $2,500 on a top-of-the-line 13" MacBook Pro, including 16 GB of memory, thinking it would solve my memory problems. So I wasn't thrilled when I got an "Out of Application Memory" error message today. I started shutting down programs, but the error message wouldn't go away. So I rebooted my computer and opened just a couple programs. It quickly froze, with the same error.
    Can anyone give me some clues for fixing this problem? I installed a lot of software yesterday, mostly programs from Adobe's Creative Suite. However, when I look at Activity Monitor, the biggest memory hogs by far are Finder and kernel_task. What's kernel_task, and why is Finder such a memory hog? I was having problems with it earlier.
    I've been perusing this thread...
    https://discussions.apple.com/message/24020867?searchText=Out%20of%20Application %20Memory?#24020867
    In the meantime, here's the result of an EtreCheck scan...
    Hardware Information:
              MacBook Pro (Retina, 13-inch, Late 2013)
              MacBook Pro - model: MacBookPro11,1
              1 2.8 GHz Intel Core i7 CPU: 2 cores
              16 GB RAM
    Video Information:
              Intel Iris - VRAM: 1024 MB
    System Software:
              OS X 10.9.2 (13C1021) - Uptime: 0 days 0:3:55
    Disk Information:
              APPLE SSD SM0512F disk0 : (500.28 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 499.42 GB (181.52 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Internal Memory Card Reader
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Configuration files:
              /etc/hosts - Count: 9
    Gatekeeper:
              Mac App Store and identified developers
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist Support
              [loaded] com.barebones.textwrangler.plist Support
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist Support
              [running] com.adobe.AdobeCreativeCloud.plist Support
    User Launch Agents:
              [loaded] com.adobe.AAM.Updater-1.0.plist Support
              [loaded] com.adobe.ARM.[...].plist Support
              [loaded] com.google.keystone.agent.plist Support
    User Login Items:
              iTunesHelper
              Google Chrome
              Dropbox
    Internet Plug-ins:
              AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
              FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
              Default Browser: Version: 537 - SDK 10.9
              AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 Support
              AdobePDFViewer: Version: 11.0.0 - SDK 10.6 Support
              Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
              AdobeExManCCDetect_x86_64: Version: AdobeExManCCDetect_x86_64 1.0.0.0 - SDK 10.7 Support
              QuickTime Plugin: Version: 7.7.3
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              Flash Player  Support
    Time Machine:
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 465.12 GB Disk used: 296.07 GB
              Destinations:
                        Time Machine 1 [Local] (Last used)
                        Total size: 465.31 GB
                        Total number of backups: 4
                        Oldest backup: 2014-05-03 13:08:51 +0000
                        Last backup: 2014-05-04 03:51:14 +0000
                        Size of backup disk: Too small
                                  Backup size 465.31 GB < (Disk used 296.07 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   2%          WindowServer
                   2%          hidd
                   1%          Creative Cloud
                   1%          fontd
                   0%          Activity Monitor
    Top Processes by Memory:
              1.70 GB          Finder
              328 MB          mds_stores
              197 MB          Dock
              180 MB          com.apple.IconServicesAgent
              98 MB          Google Chrome
    Virtual Memory Information:
              10.06 GB          Free RAM
              4.23 GB          Active RAM
              467 MB          Inactive RAM
              1.25 GB          Wired RAM
              536 MB          Page-ins
              0 B          Page-outs

    Sorry, I got cut off. I came back to post the solution.
    I was able to see someone at the Genius Bar, though I didn't have an appointment. He examined my laptop and focused on something I actually noticed some time ago - when you open Finder, the folder "All My Files" is open by default. I discovered a few days ago, that that folder bogs things down for some reason, so I got in the habit of switching to a different folder.
    Anyway, he said there's a file somewhere on my computer that's causing problems; it eats up memory. So he deleted All My Files from the Finder choices so I'll no longer access that file...unless I happen to stumble over the folder it's in.
    As I find time, I'll try and track the offending file down.

  • Out of application memory

    Been troubleshooting an iMac 27" Mid 2011 for friends with a design studio. The machine was running out of application memory in seconds despite having 12 GB ram and lots of free disk space. I've seen reports of similar problems with Mavericks setups. I have been an Apple dev since 1987 and have seen a lot, but this is the worst I've seen. I have been able to calm it down a little, but it is still not 100%. The machine in question qualified for a new logic board and video card update which was duly installed by Apple certified techs. It has spent hours running diagnostic checks. At one stage it refused to turn on, took it back to the repair shop. They plugged it in and it worked and more diagnostics revealed nothing untoward. So ok back to me.
    Trying to work with machines in this state is difficult and I thought I'd share the steps I took to try to improve the situation.
    Obviously normal Apple Diagnostic tests were not revealing the cause of the behaviour.
    I searched for others with similar issues, and looked at the advice. BTW I found Linc Davis to be contributing his usual thoughtful experience to this and would recommend reading his take on this and other issues.
    This behaviour reminded me of fixing virus infested machines. To keep the machine alive long enough to add Anti Virus software I set Terminal to start at login. Then I was able to run Top and observe the insane processes in real time. [Activity Monitor was a no go at this point] By killing the stuck processes it gave me enough time to download install Sophos, and work on the iMac. Sophos found some virus infected email attachments and dealt with them.
    Backed up the machine
    Reset the SMC
    Reset the parameter ram
    Started up from Mavericks Recovery DIsk and from there used Disk Utility to repair permissions and check the disc.
    The machine was running Mavericks 10.9.2 and decided to reinstall Mavericks. You can go back to 10.9. I had previously saved Mountain Lion and Mavericks installs on an external drive. You can install over the net - but a much longer process and not for flaky machines. Amazingly the iMac was stable throughout the Mavericks reinstall and it was successful.
    It's early days but the iMac is much better. The designers mostly use Photoshop, Illustrator, Apple Mail and Safari. They work with large images for print and need fast solid machines. Interestingly as a side note, the machine was solid for a few hours and I tried to fire up Photoshop to give it a real test. Photoshop needed to install a java runtime to function? Ok installed java runtime. Opened Photoshop. Worked for a little then Crash. Grey screen of death.
    One step forward two steps back. Time to let the designers have a go again.They can make it crash good. Would recommend new MacPro's for them but Adobe hasn't got its act together to take advantage of the power available, so staying with iMacs for now.
      Model Name:          iMac
      Model Identifier:          iMac12,2
      Processor Name:          Intel Core i5
      Processor Speed:          2.7 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          12 GB
      Boot ROM Version:          IM121.0047.B1F
      SMC Version (system):          1.72f2
    System Version: OS X 10.9 (13A603)
    Kernel Version: Darwin 13.0.0
    Boot Mode: Normal
    Model: iMac12,2
    USB
       USB Optical Mouse (Logitech Inc.)
       MEDION MD 86360 (Medion AG)
    System diagnostics
       2014-03-31 PenTabletDriver crash
       2014-03-31 PenTabletDriver crash
       2014-03-31 SophosAutoUpdate crash
       2014-03-31 mds crash
       2014-03-31 mds_stores crash
       2014-03-31 mds_stores crash
       2014-03-31 mdworker crash
       2014-03-31 mdworker crash
       2014-04-01 Kernel panic
       2014-04-01 PenTabletDriver crash
    User diagnostics
       2014-03-28 hiutil crash
       2014-03-28 hiutil crash
       2014-03-28 syncdefaultsd crash
       2014-03-28 ubd crash
       2014-03-29 Safari crash
       2014-03-29 pkgutil crash
       2014-03-31 CVMCompiler crash
       2014-03-31 ReportCrash crash
       2014-03-31 WiFiKeychainProxy crash
       2014-04-01 Finder crash *
              * Code injection
    Kernel messages
       Mar 31 18:38:51   hfs: mounted TIME on device disk2s6
       --- last message repeated 1 time ---
       Mar 31 18:46:45   hfs: unmount initiated on TIME on device disk2s6
       Mar 31 18:46:47   hfs: mounted TIME on device disk2s6
       Mar 31 20:00:05   hfs: unmount initiated on TIME on device disk2s6
       Mar 31 20:00:20   hfs: mounted TIME on device disk2s6
       Mar 31 20:03:46   hfs: unmount initiated on TIME on device disk2s6
       Mar 31 20:05:47   hfs: mounted TIME on device disk2s6
       Mar 31 20:05:50   hfs: unmount initiated on TIME on device disk2s6
       Mar 31 20:06:06   hfs: mounted TIME on device disk2s6
    Loaded extrinsic kernel extensions
       com.sophos.nke.swi (9.0.53)
       com.sophos.kext.sav (9.0.53)
    Extrinsic daemons
       com.sophos.webd
       com.sophos.sxld
       com.sophos.scan
       com.sophos.notification
       com.sophos.intercheck
       com.sophos.configuration
       com.sophos.autoupdate
       com.promise.httpd
       com.promise.emaild
       com.promise.bgasched
       com.adobe.fpsaud
    Extrinsic agents
       com.wacom.pentablet
       com.sophos.uiserver
       com.adobe.ARM.UUID
    launchd items
       /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
                 (com.adobe.AAM.Startup-1.0)
       /Library/LaunchAgents/com.sophos.uiserver.plist
                 (com.sophos.uiserver)
       /Library/LaunchAgents/com.wacom.pentablet.plist
                 (com.wacom.pentablet)
       /Library/LaunchDaemons/com.adobe.fpsaud.plist
                 (com.adobe.fpsaud)
       /Library/LaunchDaemons/com.adobe.SwitchBoard.plist
                 (com.adobe.SwitchBoard)
       /Library/LaunchDaemons/com.promise.bgasched.plist
                 (com.promise.bgasched)
       /Library/LaunchDaemons/com.promise.emaild.plist
                 (com.promise.emaild)
       /Library/LaunchDaemons/com.promise.httpd.plist
                 (com.promise.httpd)
       /Library/LaunchDaemons/com.sophos.autoupdate.plist
                 (com.sophos.autoupdate)
       /Library/LaunchDaemons/com.sophos.configuration.plist
                 (com.sophos.configuration)
       /Library/LaunchDaemons/com.sophos.intercheck.plist
                 (com.sophos.intercheck)
       /Library/LaunchDaemons/com.sophos.notification.plist
                 (com.sophos.notification)
       /Library/LaunchDaemons/com.sophos.scan.plist
                 (com.sophos.scan)
       /Library/LaunchDaemons/com.sophos.sxld.plist
                 (com.sophos.sxld)
       /Library/LaunchDaemons/com.sophos.webd.plist
                 (com.sophos.webd)
       Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
                 (com.adobe.AAM.Scheduler-1.0)
       Library/LaunchAgents/com.adobe.ARM.UUID.plist
                 (com.adobe.ARM.UUID)
    Extrinsic loadable bundles
       /System/Library/Extensions/EPSONUSBPrintClass.kext
                 (com.epson.print.kext.USBPrintClass)
       /System/Library/Extensions/Pen Tablet.kext
                 (com.wacom.kext.pentablet)
       /System/Library/Extensions/TabletDriverCFPlugin.bundle
                 (No bundle ID)
       /Library/Extensions/SophosNetworkInterceptor.kext
                 (com.sophos.nke.swi)
       /Library/Extensions/SophosOnAccessInterceptor.kext
                 (com.sophos.kext.sav)
       /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
                 (com.AdobeAAMDetectLib.AdobeAAMDetect)
       /Library/Internet Plug-Ins/AdobePDFViewer.plugin
                 (com.adobe.acrobat.pdfviewer)
       /Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
                 (com.adobe.acrobat.pdfviewerNPAPI)
       /Library/Internet Plug-Ins/Flash Player.plugin
                 (com.macromedia.Flash Player.plugin)
       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
                 (com.apple.java.JavaAppletPlugin)
       /Library/Internet Plug-Ins/WacomNetscape.plugin
                 (com.wacom.tabletplugin)
       /Library/Internet Plug-Ins/WacomTabletPlugin.plugin
                 (com.WacomTabletPluginLib.WacomTabletPlugin)
       /Library/PreferencePanes/Flash Player.prefPane
                 (com.adobe.flashplayerpreferences)
       /Library/PreferencePanes/PenTablet.prefPane
                 (com.wacom.PenTabletSettingsPrefPane)
       /Library/ScriptingAdditions/Adobe Unit Types.osax
                 (No bundle ID)
    Modified periodic scripts
       /etc/periodic/daily/110.clean-tmps
       /etc/periodic/daily/130.clean-msgs
       /etc/periodic/daily/140.clean-rwho
       /etc/periodic/daily/199.clean-fax
       /etc/periodic/daily/310.accounting
       /etc/periodic/daily/400.status-disks
       /etc/periodic/daily/420.status-network
       /etc/periodic/daily/430.status-rwho
       /etc/periodic/daily/999.local
       /etc/periodic/monthly/199.rotate-fax
       /etc/periodic/monthly/200.accounting
       /etc/periodic/monthly/999.local
       /etc/periodic/weekly/320.whatis
       /etc/periodic/weekly/999.local
    User login items
       iTunesHelper
       Dropbox
    Restricted user files: 90
    Elapsed time (s): 61

    Thu Apr  3 17:47:32 2014
    panic(cpu 0 caller 0xffffff8001edc19e): Kernel trap at 0xffffff8001ffa684, type 13=general protection, registers:
    CR0: 0x000000008001003b, CR2: 0x00007fff79c633e0, CR3: 0x0000000003489002, CR4: 0x00000000000606e0
    RAX: 0xffbfff801c6fbc00, RBX: 0xffffff8162dc3bb8, RCX: 0xffffff801c6dae08, RDX: 0xffffff8025cbfc30
    RSP: 0xffffff8162dc3b50, RBP: 0xffffff8162dc3b50, RSI: 0xffffff801c116cd8, RDI: 0xffbfff801c6fbc00
    R8:  0x0000000000000000, R9:  0x000000000000000b, R10: 0xffffff8162dc3900, R11: 0xffffff801e02bb20
    R12: 0x0000000000000000, R13: 0xffffff8025cbfc30, R14: 0xffffff8025cbfc30, R15: 0xffffff8002502750
    RFL: 0x0000000000010286, RIP: 0xffffff8001ffa684, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x00007fff79c633e0, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff8154910c50 : 0xffffff8001e22f69
    0xffffff8154910cd0 : 0xffffff8001edc19e
    0xffffff8154910ea0 : 0xffffff8001ef3606
    0xffffff8154910ec0 : 0xffffff8001ffa684
    0xffffff8162dc3b50 : 0xffffff800215fbcc
    0xffffff8162dc3ba0 : 0xffffff8001fff2d2
    0xffffff8162dc3bf0 : 0xffffff8001fdaab5
    0xffffff8162dc3c30 : 0xffffff8001fc9899
    0xffffff8162dc3c90 : 0xffffff8001fdb9c1
    0xffffff8162dc3ce0 : 0xffffff8001fdaf60
    0xffffff8162dc3d20 : 0xffffff8001fdb4c0
    0xffffff8162dc3db0 : 0xffffff8001fe4287
    0xffffff8162dc3e10 : 0xffffff8001fdc8ea
    0xffffff8162dc3e50 : 0xffffff80021dba5a
    0xffffff8162dc3ec0 : 0xffffff80021ea358
    0xffffff8162dc3f50 : 0xffffff800223de23
    0xffffff8162dc3fb0 : 0xffffff8001ef3e06
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000001c00000
    Kernel text base: 0xffffff8001e00000
    System model name: iMac12,2 (Mac-942B59F58194171B)
    System uptime in nanoseconds: 573429658726
    last loaded kext at 245574730081: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f82768000, size 65536)
    last unloaded kext at 368226394959: com.apple.driver.AppleUSBUHCI          650.4.0 (addr 0xffffff7f82a5c000, size 65536)
    loaded kexts:
    com.sophos.kext.sav          9.0.53
    com.sophos.nke.swi          9.0.53
    com.apple.filesystems.afpfs          11.0
    com.apple.nke.asp-tcp          8.0.0
    com.apple.filesystems.smbfs          2.0.0
    com.apple.driver.AppleBluetoothMultitouch          80.14
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AGPM          100.14.11
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.kext.AMDFramebuffer          1.1.4
    com.apple.driver.AppleHDA          2.5.2fc2
    com.apple.AMDRadeonX3000          1.1.4
    com.apple.driver.AppleIntelHD3000Graphics          8.1.8
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleMikeyDriver          2.5.2fc2
    com.apple.driver.AppleBacklight          170.3.5
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.kext.AMD6000Controller          1.1.4
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.driver.AppleThunderboltIP          1.0.10
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleIntelSNBGraphicsFB          8.1.8
    com.apple.driver.AppleIRController          325.7
    com.apple.driver.AppleUSBCardReader          3.3.5
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AirPort.Atheros40          700.74.5
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.security.SecureRemotePassword          1.0
    com.apple.driver.AppleBluetoothHIDKeyboard          170.15
    com.apple.driver.AppleHIDKeyboard          170.15
    com.apple.driver.IOBluetoothHIDDriver          4.2.0f6
    com.apple.driver.AppleMultitouchDriver          245.13
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.DspFuncLib          2.5.2fc2
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOAcceleratorFamily          98.7.1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.kext.AMDSupport          1.1.4
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.driver.AppleThunderboltEDMSink          1.2.1
    com.apple.driver.AppleHDAController          2.5.2fc2
    com.apple.iokit.IOHDAFamily          2.5.2fc2
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.driver.AppleThunderboltDPOutAdapter          2.5.0
    com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
    com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.0
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
    com.apple.iokit.IOUSBMassStorageClass          3.6.0
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.driver.AppleThunderboltNHI          1.9.2
    com.apple.iokit.IOThunderboltFamily          2.8.5
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOEthernetAVBController          1.0.3b3
    com.apple.driver.mDNSOffloadUserClient          1.0.1b4
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1

  • How do i resolve an issue where i have run out of application memory?

    My imac says i have run out of application memory and that i should quit applications. How do i resolve this issue?

    The message has nothing to do with low disk space.
    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
    A long-running process with a memory leak (a kind of bug)
    Not enough memory for your usage pattern
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
    View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command: 
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the  leaks(1) man page and the Apple developer documentation for details.

  • Recent "out of application memory" dialog popup

    Hello-
    Within the last few days, I am receiving a message "Your system has run out of application memory."  I've not changed anything and am not running more than iTunes, Safari, Mail and Marketcircle Daylite.  The same programs I've run for years. Any ideas as whee to look/fix?

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
              A long-running process with a memory leak (a kind of bug)
              Not enough memory for your usage pattern
    Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
              View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Maybe you are looking for